Used Assembly Accessories for sale (21,430)

Condition: good (used), Hard cover assembly table The device is fully functional and in very good condition. Technical data: Max. binding width 810mm. Power supply: Pneumatic Weight: 140 kg Lodpfevkt N Uox Ab Tohc Equipment: – elements for fixing the cardboard – module for wrapping the cover

Condition: good (used), 100.000L steel tank. Fire / drinking water underground or above-ground Dimensions 16.9 x 3.10m wall thickness: 5mm weight 8mm approx. 12t, weight 5mm approx. 9t. The tanks are sandblasted by us, equipped and then painted internally and externally with a corrosion-resistant epoxy resin coating. As standard, the tank has a suction pipe with a suction basket, a breathing chimney, a supply and drain connector, a ladder and a hatch. For an additional fee, we install a float valve and a manhole chimney Lsdpodbllzofx Ab Tohc We can weld additional accessories, e.g. a platform. We have tanks with and without beds. Steel beds for PLN 1800€ net. The tanks have a tightness certificate and a declaration of conformity. We offer delivery to the customer.

Condition: new, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: kg Year of manufacture: Operating hours: Lodpfx Aeyk Dz Esb Tohc Lifting height: mm Overall height: mm Mast type: Free lift: mm MACHINE DETAILS Drive type: Design type: Battery: EQUIPMENT Complete retrofit kit: front window + windscreen wiper + mounting materials New and unused Fits standard Linde 386, E16, E18, E20 models (not for special height or EX protected) Loading onto pallet truck is no problem Delivery via freight forwarding available on request.

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS No further information available. MACHINE DETAILS No further information available. EQUIPMENT Complete retrofit kit for rear window Wiper Mounting material Lhsdpoyk Dr Rofx Ab Toc

Condition: excellent (used), Zwick/Roell Zwick/Roell ProLine Universal Testing Machine Z010 TN – 10 kN Type: BT1-FB010TN.D30 For sale is a professional material testing machine from Zwick / Roell, suitable for tensile and compression tests up to 10 kN. The machine comes from industrial use and has been professionally maintained. General Data: Manufacturer: Zwick GmbH & Co. KG, Ulm Rated Force: 10 kN Type of Testing: Tensile and Compression Testing Technical Specifications: Crosshead speed: 0.001 – 1,000 mm/min Speed accuracy: 0.01% of Vnom Position resolution: 0.038 µm Position repeatability: < 2.0 µm Maximum test frequency: 0.5 Hz Data acquisition rate: 500 Hz Measured value transmission to PC: 10–100 Hz Force measurement according to ISO 7500-1 Dimensions & Weight: Height with leveling elements: approx. 1,331 mm Width with electronics: approx. 930 mm Depth with electronics: approx. 437 mm Work space width: 440 mm Work space height below: 1,050 mm Weight with typical fixtures: approx. 160 kg Electrical Data: Input voltage adjustable: 100–250 V Mains frequency: 50 / 60 Hz Power consumption: 800 VA Current at 230 V: approx. 3.4 A Protection: ≤ 16 A Connection: 1L / PE / N Documented Test & Calibration Records: 18.09.2017 Machine BT1-FB010TN.D30 testXpert II Version 3.2 tC-PC System Ljdpfxeyl T U Do Ab Tjhc Testing temperature: 23.3 °C Travel measurement system: incremental encoder (rotary) Force transducer installed 29.01.2014 Force transducer: Xforce HP Module: DCSC Calibrated at Zwick Ulm 28.08.2013 Force transducer: Xforce P Module: DCSC Rotation before test series: 120° testXpert control Documented service and calibration records are available. Software & Control: Software: testXpert® II Documented version: V3.2 Installation documentation from version 2.2 Documentation status: March 2010 PC control: tC-PC Interfaces: RS232 / Ethernet Note: testXpert II is a professional industrial testing software. Installed Modules & Components DCSC measurement module Force transducers Xforce P / Xforce HP Incremental encoder (rotary position measurement system) ISO 7500-1 compliant force measurement Installed under crosshead Important Note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: Material testing machine BT1-FB010TN.D30 PC with monitor Force transducer DCSC module Clamping fixtures / grips Adapters and brackets Tools Documentation folder with records Scope of delivery as shown in the pictures. (Subject to changes and errors in technical data and specifications!)

Condition: used, functionality: fully functional, Year of construction: 2011, load capacity: 22,000 kg, empty load weight: 3,165 kg, construction width: 6,000 mm, Accessories Load center: 750 Mast type: None Condition: Ready for use and fully functional Technical condition: Very good Ljdju Dz R Dspfx Ab Tehc Description: 2x forks: 250 x 80 x 2 400 mm

Condition: used, functionality: fully functional, Year of construction: 2014, empty load weight: 512 kg, total length: 4,020 mm, fork length: 1,200 mm, load capacity: 3,485 kg, Accessories Load center: 600 Fork width: 150 mm Fork thickness: 50 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: None Condition: Ready for use and fully functional Lhedpfx Abewikayj Tjc Technical condition: Very good Description: 2x forks: 150 x 50 x 1,200 mm 2x forks: 150 x 50 x 1,200 mm

Year of construction: 2019, condition: used, General Information: The MobyLift is a handy tool for ergonomically lifting, transporting, and setting up products such as doors, tabletops, and other panels. From a work-related perspective, the MobyLift is a responsible investment. It is easy to use, reduces the number of damaged products, increases productivity, prevents back pain, and thus reduces work absence. The MobyLift was developed in collaboration with reputable assembly companies, combining their knowledge and experience with our know-how to create a practical tool. The MobyLift MC-120-H consists of the following modules: · Mobile base · Electric lifting and tilting system · Automatic vacuum control · Wireless electric operation. The MobyLift MC-120-H is designed so that it can be quickly and easily disassembled into a number of portable modules after being switched off. This makes it very convenient to load and unload the MobyLift or to move it to another floor or building. The MC-120-H is supplied with a 24 V battery charger for the electric lifting and tilting system and is equipped with a charge level indicator to continuously monitor the battery status. Specifications: - Lifting capacity: 120 kg - Lifting height: 100 cm, electrically operated - Tilt angle, front - rear: 37°, electrically operated - Swivel angle of the head joint on both sides: 90° - Rotation angle of the head joint: 360°, continuous - Side shift: 7 cm - Weight: 150 kg, can be disassembled into modules Storage location: Nattheim Lhedpfov Dauwjx Ab Tjc

Condition: used, Pneumatic press, compressed air press BOSCH type Manufacturer no.: Year of manufacture: 1980 Pressing force: 18 kN = 1.8 t at 5 bar 15 kN = 1.5 t at 4 bar 12 kN = 1.2 t at 3 bar 8 kN = 0.8 t at 2 bar 6 kN = 0.6 t at 1.8 bar Throat depth: 100 mm Ram stroke: 70 mm Table size: 245 x 200 mm Ram face: Ø 45 mm Max. installation height: 235 mm Lodpfx Abjh U Dtus Tehc Clamping pin bore: Ø 20 mm with clamping screw Compressed air requirement: 5 bar - Pressing force infinitely adjustable via pressure regulator - Pneumatic cylinder with ram adjustable in height by 90 mm - Pneumatic dual-hand control - Mounted on a metal frame with wooden boards Required floor space (L x W x H): 1050 x 700 x 1600 mm Weight of pneumatic press: 82 kg Weight including table frame: 140 kg In very good condition

Condition: used, Mobile jib crane, gantry crane, portable crane AUSTEN Type HVR 05 Serial no. 1808137 Year of manufacture 2019 Load capacity 500 kg Maximum outreach from load hook to base plate 650 mm Overall height 3025 mm Height to underside of crane beam 2945 mm Height to crane suspension eye 2900 mm / 2850 mm Lhjdpfxoi Aqgts Ab Tjc Crane trolley travel path 1250 mm Crane beam span 1145 mm (center of wheel – center of wheel) Internal distance between supporting structures 1080 mm Base plate with steel counterweight (blue painted) 1320 x 800 x 850 mm - Demountable aluminium support structure - Crane beam manually movable on crane runway rails - The crane frame is set up without anchoring to the floor and stands independently due to its own weight. - Base made of steel (blue painted) Width 1320 mm, Depth 800 mm, Height 850 mm - The base is made entirely of steel and has a dead weight of 800 kg - Moveable with pallet truck Net weight 800 kg Very good condition Price without hoisting gear

Condition: ready for operation (used), functionality: fully functional, 2900 werkuren!!! Diesel-oil (1) -- Naphte (2) -- Electr (3): electric voltage: 3 x 380V - 50Hz Low press. (1) High press (2) Screw (3): 12.75 bar screw compressor Volume flow rate: 18.3 m3/min Power imput: 90kW Volume (L): 1500 L Lhedpexl Hxbsfx Ab Toc

Condition: used, Condition: NEW with pneumatic clamping device. The universal assembly station for the production of wall, ceiling and roof elements in timber frame construction,ceiling and roof elements in timber frame construction. - Heavy-duty, basic structure of the machine frame for a flat work surface - Clamping of the elements via 9 system clamping beams with pneumatic pressure cylinders. The system clamping beams are extendable for element heights from 100 to 3,800 mm. The cylinder stroke is 320 mm, the clamping force per cylinder is approx. 420 kg/4,200 N. at 10 bar operating pressure It can be clamped in two groups of 5 pieces and 4 pieces, two elements can be clamped/worked on at the same time. - Planking of the work surface as far as technically possible with wooden panels. (A perforated metal panel is available as an option, as shown in the photo)) Ljdpfewv Tqbex Ab Tehc - Stop system at the bottom with 9 pins and at the side with 7 pins for dimensionally accurate elements. - Swivelling device of the assembly station via 3 hydraulic cylinders for panel weights up to panel weights of up to 4,000 kg to 85° (95°). The hydraulic system is compactly integrated in the frame area of the assembly station. - The electrical control cabinet is also installed underneath the assembly station for protection. - The functions are operated via a control bottle. - A compressed air connection and socket are installed on both ends of the station. and on the long side of the station there are 2 sockets and 2 compressed air connections compressed air connections for connecting hand-held devices. - The stations are modular in design, so that they can be expanded immediately or later with a to form a complete turning station. You can see a turning station in picture 3. - Further options: Assembly table without set-up function Perforated metal panels Other working dimensions on request Working area: - Maximum element size (W x H): 12,000 x 3,800 mm - Minimum element size (W x H): 1,000 x 100 mm - Cylinder stroke of the clamping cylinders: 320 mm - Stop/ socket pin height: 120 mm - Working height: approx. 700 mm - Colour RÁL 7035 light grey

Condition: used, Technical data: - Manufacturer Leif & Lorenz - Working width max. 1,200 mm Lhjdpfx Absvvbqwj Tsc - Brush diameter *160 mm - Suction connection D100 mm - Year of manufacture 2005 - Motor power 0.37 kW - Location, in stock in Blomberg - Also available for assembly with roller or belt conveyor

Condition: used, functionality: fully functional, Year of construction: 2006, load capacity: 45,000 kg, empty load weight: 4,200 kg, total length: 10,000 mm, Accessories Mast type: None Lhodpeu Dzv Hsfx Ab Toc Condition: Ready for use and fully functional Technical condition: very good Description: In addition to this --make-- model, we have approx. 200 heavy-duty forklifts, compact forklifts, forklift trucks & sideloaders in our warehouse in Hamburg and Gdansk. Visit our homepage - sago-online Hire purchase & financing at favorable conditions are always feasible for us. We are also happy to buy your used truck free of charge, even without you purchasing a vehicle from us. Our owner Mr. Peter Sawitzki will be happy to advise you in detail on this --make type-- P.S.: Our forklift master workshop specializes in repair, maintenance, overhaul and special construction for forklifts from 8 tons. We are also happy to display your vehicle for sale on consignment.

Condition: used, functionality: fully functional, Year of construction: 2014, load capacity: 3,300 kg, empty load weight: 795 kg, Accessories Load center: 600 Mast type: None Lhedpju Dzrhefx Ab Tsc Condition: Ready for use and fully functional Technical condition: Very good Description: In addition to this Luck model, we have approx. 200 heavy-duty forklifts, compact forklifts, forklift trucks & sideloaders in our warehouse in Hamburg and Gdansk. Visit our homepage - sago-online Hire purchase & financing at favorable conditions are always feasible for us. We are also happy to buy your used truck free of charge, even without you purchasing a vehicle from us. Our owner Mr. Peter Sawitzki will be happy to advise you in detail about this LASTSTABILISATOR , The Load Stabiliser P.S.: Our forklift master workshop specializes in repair, maintenance, overhaul and special construction for forklifts from 8 tons. We are also happy to display your vehicle for sale on consignment.

Condition: used, functionality: fully functional, Year of construction: 2006, empty load weight: 2,090 kg, construction width: 1,500 mm, Accessories Mast type: None Condition: Ready for use and fully functional Technical condition: very good Description: Cross-section: approx. 800 mm - 2 400 mm Lhedpfx Absu Dzm Eo Toc

Condition: used, functionality: fully functional, load capacity: 12,000 kg, Accessories Mast type: None Condition: Ready for use and fully functional Lhedpfx Asu Dzg Eeb Tsc Technical condition: Very good Description: Length: 1450 mm Diameter: 250 mm

Condition: used, functionality: fully functional, load capacity: 10,000 kg, empty load weight: 1,250 kg, Accessories Load center: 600 Mast type: None Ledpfeu Dzbvex Ab Tehc Condition: Ready for use and fully functional Technical condition: Very good Description: Length: 2800 mm Diameter: 270 mm

Condition: used, functionality: fully functional, Year of construction: 2017, load capacity: 3,500 kg, fork length: 1,400 mm, empty load weight: 980 kg, total length: 6,000 mm, Accessories Load center: 700 Fork width: 150 mm Fork thickness: 60 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: None Lhedpfou Dy I Isx Ab Tec Condition: Ready for use and fully functional Technical condition: Very good Description: Length 6000 mm, 2 forks 150 x 60 x 1400 mm

Condition: used, functionality: fully functional, Year of construction: 2011, empty load weight: 900 kg, total length: 6,000 mm, fork length: 1,500 mm, load capacity: 5,000 kg, Accessories Load center: 900 Fork width: 200 mm Fork thickness: 50 mm Mast type: None Condition: Ready for operation and fully functional Technical condition: normal Ledpfx Ajyi Ifleb Tohc Description: Length: 6000 mm; Forks: 200x50x1500, 2 hydraulic folding forks; 2 forks with hydraulic opening/closing Length: 6000 mm; Forks: 200x50x1500, 2 hydraulic folding forks; 2 forks with hydraulic open/close

Condition: excellent (used), Offer consisting of: As-new Renz punching machine DTP 340M base unit including various tools, 1x 2:1 5.5 x 3.5mm; 1x 3:1 4 x 4mm; 1x US pitch 8x3mm, 1x WBS 340, 1x PBS 340. Lhodpfx Asykmydeb Toc

Condition: used, dimensions 410 x 410 x 860 m Base unit for a Müller swing-arm grinding machine with electrical cabinet. Inside are motor protection switches, fuses, 16 A sockets, etc. The electrical Lodjxxbzqjpfx Ab Tjhc components are shown in photo no. 2. The grinding machine was sold without the base unit at the buyer's request. Thebase dimensions are 300 x 300 mm. With modifications, the base unit can be used for any similarly sized machine.

Condition: excellent (used), dimensions of the machine ca. 380 x 200 x 134 mm weight of the machine ca. 24 kg baseplate-clamping range 110 x 70 mm workpiece sizes max. 56 x 70 x 25 mm profile depth max. 15 mm angular adjustment 0-2 ° Unused unit in a wooden box. Clamping: permanent-magnetic, to use on a table of Lhedou Twcfjpfx Ab Tsc a grinding machine for grinding pieces with angle. Detailed describtion see attached PDF. doc. Machine dealer with own stock of 1600 m².

Condition: used, Price for one piece! Lsdpexwp E Ijfx Ab Tjhc

Year of construction: 1991, condition: used, machine/vehicle number: 5385, comprising: Magazine loader SIEMENS, year of manufacture: 1991, serial no.: 5385, ERSA ERS 503 reflow oven, serial no. 8596-003, rated power 38 kW, PCB conveyor ALL SMT C-100LD-2-L, year of manufacture: 2016, width: approx. 100 cm, weight: 90 kg, pick-and-place machine ASM Siplace D1i, serial no.: C3052-12040561, year of manufacture: 2013, net weight: approx. 2,000 kg, with 28 feeder slots, pick-and-place machine ASM Siplace D1i, serial no.: C3052-12040560, year of manufacture: 2013, net weight: approx. 2,000 kg, with 28 feeder slots, including magazine trolley, PCB conveyor NUTEK NTM410L-350-1, year of manufacture: 2014, width adjustable, stencil printer (solder paste printer) DEK Horizon 03, serial no.: 282950, year of manufacture: 2004, de-magaziner SIEMENS, serial no.: 5385, year of manufacture: 1991, incl. accessories such as feeders and PCB magazines. Ledpfxoyidkuo Ab Tehc