Used Assembly Accessories for sale (25,330)

Year of construction: 2022, condition: new, bearing diameter 120 mm motor Synchronmotor Nominal turning speed 3000 1/min Maximum turning speed 4000 1/min Dedjua Ituopfx Ah Uocp Torque 76,4 Nm current 38 A Unused grinding spindle for Höfler Rapid 1250

Condition: used, Good condition – fully functional! Due to business closure, a Höfer sanding machine (long belt sander) with extraction system is for sale – it is unclear whether an additional motor is required! – sold as seen in the pictures. Dcedsw Nxzwopfx Ah Usp A variety of sanding belts / sandpapers are included. A forklift for loading is available.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Our former assembly cell was only in operation for a few hundred hours (the exact number is unknown) and is no longer needed, as the conversion to our new product is not worthwhile for us. The condition of all devices is very good due to the low usage - apart from the batteries, which need to be replaced. The entire assembly/robot cell has the following dimensions: height: 169cm, width: 175cm (150cm + 25cm), depth: 130cm, weight: approx. 600 kg The most important elements of the assembly/robot cell are as follows: Mitsubishi robot mod. RH-6SH5520-S312, year of manufacture 2010 Dcodpfxori S Hks Ah Ujp Mitsubishi Teaching Box Mod. R56TB, year of manufacture 2010 2x ETIPACK labeling device Mod. CLEAR13, year of manufacture 2010 Many details are visible in the photos and in the documents, for everything else we are happy to provide information.

Condition: good (used), Year of construction: 2022, functionality: fully functional, Assembly line for timber frame construction - framing machine X-Frame - clamping table X-Clamp - automatic working bridge X-Multi - tilting table X-Tilt - clamping table X-Clamp - clamping table X-Clamp - bridge X-Multi Dcedpfxjxd Awws Ah Uop

Condition: ready for operation (used), BJZ NTM 300 SL Depaneling Machine Equipped with PC, Matrix-2000, ionization fans, and LED lighting. Maximum separation length: 300 mm Weight: approx. 110 kg Operating pressure: 6 bar Space requirements: 1250 mm x 900 mm x 2150 mm (W x D x H) Weight: approx. 336 kg You are welcome to arrange a viewing appointment. We can also organize affordable shipping for you! Dcedpfx Ajxgda Seh Uop You will receive a proper invoice. For international customers, a net invoice can be prepared, provided you have a valid VAT identification number. Subject to prior sale. Visit our shop and also view our other offers. The mentioned company names and trademarks are the property of their respective owners and are used for identification and description purposes only. Deviations from technical data and errors in the item description may occur and remain reserved.

Condition: good (used), Year of construction: 2008, Hydraulically height-adjustable lifting cart by Witte - Alufix for loading coordinate measuring machines (CMM) With Hovercraft air bearing plate Hydraulic lift cart with height adjustment from approx. 660 to 950 mm. Table surface is coated and equipped with a roller on the broad side to bridge height differences between the table and the measuring plate. Internal dimensions approx. 900 x 700 mm. Eurofix air bearing plate with handle and integrated air valve for easy sliding and positioning of heavy workpieces on coordinate measuring machines. The surface features a 50 mm grid of holes. The holes have a diameter of 12.5 mm, a depth of 7 mm, and are fitted with M6 threaded inserts at the bottom. Dcjdpfx Ajw Nylkeh Usp The air supply can be activated via the valve integrated in the handle, allowing the entire plate with the mounted workpiece to be moved very easily. Usable surface area (aluminum): approx. 600 x 600 mm. Ideal for Witte Alufix clamping systems for fixture construction in the automotive industry, etc. Dimensions: approx. 1000 x 800 x 660/950 mm (LxWxH). Weight: approx. 100 kg. The machine can be demonstrated at our premises by appointment. We only offer machines that are operational and ready for demonstration in our warehouse—see “further offers from this seller.”

Condition: new, A complete working station for the production of timber frame walls including the following functions 1. Framing of the wall 2. Application of cladding 3. Nailing or stapling of cladding 4. Drilling and Routing of openings and overhangs 5. Application of breather paper 6. Nailing of battens 7. Gluing of sheeting material to frames Specification Full PC control with 2 off 19” touch screens Interactive display of framing for panel assembly Automatic download from drawing software Heavy duty tables with one fixed side and one moving side 90 degree squaring corner blocks with pneumatic retraction to enable panel to move to next position when finished 1500mm minimum panel height Maximum panel height 6m Maximum panel length 20m 825mm working height 500mm maximum frame height Dsdpfob Tmrvjx Ah Uocp Motorised table opening with automatic brake locking Independent retractable clamping system, for the complete access of nail guns along top and bottom rails, to enable square and accurate clamping of the panel Framing tools driven to the required position via a servo drive motor, with heights controlled by software Bridge mounted with nailing / stapling tool as standard. Options for other tools to be mounted Full integration with major software packages including Sema, Dietrich;s, HsbSoft, CADWORKS, Gang Nail, DDS, Mitek.& Inventor Batten application system with guide to ensure they battens are kept straight before nailing including batten storage area Selection of multiple nail positions in both automatic and manual modes Pneumatic lifting rollers to assist the manually transporting of the finished panel to next position. Optional stud/sheeting carriage enabling studs to remain adjacent to the operator whilst assembling the frame.

Condition: used, Year of construction: 2013, operating hours: 14 h, functionality: fully functional, machine/vehicle number: TJ-350-20/40 KPSI //TJ-160-20/40 KPSI, total width: 1,500 mm, total length: 3,000 mm, total height: 2,500 mm, pressure: 2,800 bar, operating pressure: 2,800 bar, fuel: diesel, overall weight: 3,000 kg, rotational speed (min.): 700 rpm, rotational speed (max.): 1,500 rpm, high-pressure hose length: 60,000 mm, year of last overhaul: 2025, Equipment: rotational speed infinitely variable, A Bundle of 5 ea. UHP waterblast machines, c/w a vast variety of spares and accessories, as follows: 1 x High-Pressure Water Jet Unit with Deutz-MWM V-8 Diesel Engine adjustable pressure 0–1400 bar and 0–2800 bar, dump system, with plunger changeout kit as follows: 1400 bar at 99 liters/minute, and 2800 bar at 46 liters/minute. The fluid head of this pump, including stuffing boxes and valves will be used for both 1400 bar and 2800 bar. Changing pressure range between 1400 and 2800 Bar is carried out by a simple and easy plunger changeout. The unit was built in 2013 and kept operational as a backup machine, but was only used once for 14 hours at 2800 bar for a bundle heat exchanger cleaning project. This UHP machine is mounted on a zinc coated steel skid. The Deutz-MWM engine was purchased as a used engine, with approx. 3,000 operating hours , and was fitted in 2013 with a new Jetech UHDW high-pressure water jet pump. In addition, a large amount of accessories and spare parts are included, such as dump guns & foot valves, swivel joints, surface cleaners, rotary nozzles, high-pressure lances, nozzle inserts, seals, special tools, etc. An identical UHP waterblast unit is also available, but with a Scania V-8 engine and counting 850 operating hours at max. 1400 bar / 99 liters/minute. That unit is housed in a 20ft. container, with an 800 l Diesel Tank, a work bench /vise, Dedpexc E Trsfx Ah Uscp Furthermore, there are 3 additional high-pressure water jet units with 110 kW power each, 2 of which have Volvo TD71A Diesel Motors, plunger changeout kits for 1400 and 2800 bar. A third unit is a Kamat K11000 with 2800 Bar OP. and a JCB Dieselmax engine. Also available is a hydraulic heat exchanger cleaning device with a rotating lance mounted on a scissor lift table, suitable for very large heat exchangers. All equipment comes from the closure of my company due to retirement. A buyer is sought for all machines and accessories as a complete package. Price for the complete package 150000 € , pick up only, at D-36404 Vacha/Germany, or delivery in germany subject to additional fees.

Year of construction: 2022, condition: like new (used), functionality: fully functional, Milling table - welding table - straightening table Dimensions approx. 1800x4000 mm Weight approx. 4 tons Ground plate With 50 threaded grids with countersunk M14 screws Plate thickness approx. 45 mm Pick-up only Dcedpfoxcp A Rox Ah Usp Condition: as new

Condition: good (used), Drilling and milling head for lid milling machine Dcedov U A S Hspfx Ah Ujp

Condition: used, Handling Device, Handling System JÄGER HANDLING Manipulator for screwdriving technology Type: Handy-flex 200 Horizontal movement: 450 mm Vertical movement: 600 mm Load capacity: 4 to 10 kg Reach: 150 to 600 mm Vertical guide column: Ø 25 mm Horizontal guide columns: Ø 16 mm Tool holder: 33 x 33 mm with screw clamp - Movable in three axes (horizontal, vertical, rotatable) - KÜBLER rotary encoder for rotation, type 8.5873.5320.B311.S003 Dsdpfx Ajfgpfmoh Uocp - BALLUFF linear transducer for horizontal movement, type BTL6-A110-M0450-A1-S115 - 2 pieces balancer for vertical movement CP DESOUTTER, type 10 D, adjustment range 2 to 5 kg per balancer - For weightless suspension of small devices - Stepwise adjustable load capacity - Constant pulling force Required space (L x W x H): 770 x 310 x 1200 mm Dead weight: 19 kg Good condition

Year of construction: 2024, condition: new, The flattest wooden frame construction table in the world = 3 cm! Delivery without wooden boards. Text line break with the following data: Included components: 1 double rail (zero stop) - 10 perforated rails - 10 rack and pinion clamps - 14 adjustable stop blocks - 14 interchangeable pressure plates outer wall - Battery impact screwdriver - Bit adapter - 50 MMS 10x70/5 dowel - Hammer drill 8x165 dimensions: Clamping length from 0 to 3.550 mm hole grid 140 mm with plate width 1.250 mm = table length 12.350 mm max. clamping force approx. 250 kg stroke length clamp 340 mm height of stop blocks 100/160 mm Dodpeb Nrbnsfx Ah Uocp The frame building aid was developed in order to precise production of timber frame elements. elements. Special attention was paid to the space requirements and the price. Due to the extremely flat it is now possible to change the surface by removing the the space by removing the clamps and stops. used in a different way. This is not only for small, but for all but for all company sizes a special advantage. After creating a flat surface, the tensioning rails are rails are aligned and anchored to the anchored to the floor. The intermediate spaces are covered with a 30 mm thick wooden panel to be mounted on site. filled. The same plate can be used to attach ramps to the edges. can be attached to the edges with the same plate. The level created in this way level can also be driven on with heavy vehicles vehicles, or can be used as a storage area. Thus the place can be activated only if necessary for the timber frame construction. be activated. The steel parts are galvanized. The entire assembly takes place on site. After adjusting the T [...]

Condition: not inspected (used), Assembly press manufacturer: Fonmar, pneumatic pressure system, resistance heating, cooling by water, compressor, coolant pump, control unit, transport trolley Dcodjw U R Dnjpfx Ah Ujp

Condition: good (used), Year of construction: 2003, Internal item no.: 25045 Universal Milling Machine Emco FB4 Year: 2003 + Accessories (Hydraulic machine vice Allmatic 110 / 12x SK40 holders in rack) + Electrically tested until 11/2028 (as per inspection sticker) + 3-axis digital readout Heidenhain ND780 Travel: X 450 / Y 300 / Z 350mm Quill stroke: 100mm Main drive: 3.2kW Speed range: 63 - 3150 rpm Milling table: 800x400mm Dcsdpfsw Hrycsx Ah Ujp Automatic central lubrication Dimensions (LxWxH): 200 x 200 x 200cm Weight: 2100kg

Year of construction: 2019, condition: ready for operation (used), A complete automation system for handling machining center products is available. 1) Full protection cabin with safety door. 2) 6-axis robot Kuka KR 120 R 3200 PA with gripper adapter. 3) 6-axis robot Kuka KR 120 R 3500 with gripper adapter. 4) 2x 6-axis robots Kuka KR 10 R 1420 with gripper. 5) Handling unit with 2 robots. 6) Reference chamber. 7) Marking station with extraction, cleaning station, and assembly unit for 2 lanes. 8) 2x adhesive application stations. 9) 2x screwing stations. 10) Drawer system with part inserts. 11) Pallet storage area. The transfer stations and removal/handling grippers are designed for specific parts. Documentation available. An on-site inspection is possible. Dodpfx Ahexaph Ie Uocp

Year of construction: 2008, condition: used, machine/vehicle number: 5024-581, Perm. ambient temperature: +0° C to +46° C Perm. relative humidity: 5% to 95% non-condensing Power input: CA 110 to 240 VAC (+/- 10%), 50/60Hz (+/-3Hz) Protection class: IP 64 Perm. angular acceleration: (55-2000 Hz) < 100 ms/s2 Measuring range (ball diameter): 2400 mm Single-point ball test: 0.013 mm Dcsdpfx Aemidx Eoh Usp Single-point reproducibility test: 0.020 mm 3D longitudinal measurement uncertainty test: 0.029 mm Software: interface WinRDS Weight: 7.8 kg

Condition: used, Filter fitting, filter unit COMPAIR for compressor units Compressed air filter Type: CF 0087B ZP Dcsdpfxohalvds Ah Usp Factory No.: 3363006 / 05 / 005 Operating pressure: max. 16 bar Thread connection: G 1 1/2" Flow rate: approx. 8,5 m³/min Filter element- No: CE 0087B - Filter housing made of aluminum weight: 5 kg dimension L x W x H 125 x 110 x 420 mm good condition

Condition: used, Year of construction: 1992, machine/vehicle number: 160 3205, Sale only within EU member states! No private sale MAE can be inspected. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tooling, as well as for compliance with all safety and environmental protection safety and environmental protection requirements. Any warranty is excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tools as well as for compliance with all safety- and environmental-requirements, mentioned in the accident prevention regulations, Dcodpfx Ahsuxl Ezj Uep we take over no guarantee.

Condition: used, Year of construction: 1998, workpiece weight max. 2000 gr Used weightcontrol WC2000 for die casting machines up to a unit weight of 2000 grams. The device has been checked and repaired by the manufacturer Dcsdpjwx R Uiefx Ah Uop During repair we exchanged weight cell and control.

Condition: good (used), Steel Hall 15 x 17 m – with Complete Electrical Installation, Gates, Windows & Structural Calculations For sale is a solidly built steel hall measuring 15 x 17 m with a clearance height of 4.10 m. • Year of construction: 2004 • Dismantled: 2024 – fully disassembled, ready for transport • Structure: heavy-duty steel beams, very robust • Equipment: • 2 electric entrance gates (height 4.10 m) • 1 entrance door • 3 windows with roller shutters • complete electrical sub-distribution including gate controls • lighting, sockets, switches & wiring included • Documentation: full structural calculations available ✅ Ideal as a workshop, warehouse, machinery hall or for agricultural use. ✅ All components included – ready for immediate assembly. ✅ Crane loading on site possible. 👉 Collection by buyer, price negotiable. 👉 Pictures and further information available on request. Dcedpfxsw Tcmre Ah Uep

Condition: used, Clamping plate, machine table with metal base Clamping table, assembly table, clamping angle plate Clamping surface: 1200 x 370 mm T-slot spacing: 90 mm Table height: 870 mm - The T-slot table was originally a machine table from a milling machine - 4 T-slots, 16 mm - Metal base with height-adjustable feet - Multilayer wood plate L x W x H 1200 x 400 x 18 mm Overall dimensions L x W x H 1400 x 770 x 870 mm Weight: 250 kg good condition Djdpfx Ajwkvi Njh Ujcp

Condition: used, Heavy-duty shunting trolley, heavy-duty transport trolley Assembly trolley, heavy-duty trolley DIRK PROKOP type 10001-4 Very stable special design Load capacity: 1800 kg Loading area: 2720 x 930 mm Load carrier length: 2720 mm Load carrier width: 140 mm Load carrier height: 135 mm Ground clearance under the load carrier: 100 mm Height of upper edge of load carrier from floor: 235 mm Ground clearance of heavy-duty castors: 15 mm - 2 load carriers made of double-T steel bolted to both sides of the trolleys - Load carriers can be easily separated from the trolley using locking bolts - Chassis with very sturdy swivel castors with central brake - Can be moved in all directions (lengthways, crossways, crab steering, etc.) - Load carriers can be driven under with a normal pallet truck to unlock the trolleys - Ideal for in-house transportation of switch cabinets or machine parts for assembly. - The parking brake device and the support blocks on the longitudinal beams can be easily removed. Overall length with trolleys: 3450 mm Width of the trolleys: 980 mm Unladen weight: 350 kg Very good condition Dedpfx Aerktlfoh Uecp

Condition: used, Handling device, handling system JÄGER HANDLING Manipulator for screwing technology Type: Handy-flex 200 horizontal movement: 300 mm vertical movement: 370 mm Load capacity: 10 to 14 kg Projection: 250 to 550 mm guide column vertical: Ø 25 mm Guide columns horizontal: Ø 16 mm tool holder: Ø 26 mm oval with screw clamping - Movable in three axes (horizontal, vertical, rotary) - 1 piece Balancer for vertical movement TECHNA, type 9340, adjustment range 10 to 14 kg - adjustable latch for vertical movement, manual release via Bowden cable Dsdjfx Hxzspfx Ah Uscp - for weightless suspension of small appliances - Load capacity adjustable - constant attraction Space requirement L x W x H: 880 x 500 x 1120 mm Own weight: 23 kg sound condition

Condition: used, Mobile jib crane, gantry crane, traveling crane AUSTEN type HVR 05 Serial no. 1808137 Year of construction 2019 Load capacity 500 kg Projection of load hook to foundation foot max. 650 mm Overall height 3025 mm Height to lower edge of crane crossbeam 2945 mm Dsdpei Aqgtsfx Ah Ujcp Height to crane suspension eye 2900 mm 2850 mm Travel distance of crane spreader beam 1250 mm Span of crane spreader beam 1145 mm (center roller - center roller) Internal distance between the supporting structure 1080 mm Foundation base plate with steel weight (painted blue) 1320 x 800 x 850 mm - Aluminum support structure, removable - Crane crossbeam can be rolled by hand on crane runners - The crane frame is set up without being connected to the ground and is self-supporting due to its high dead weight. - Steel base (painted blue) Width 1320 mm, depth 800 mm, height 850 mm - The base is made entirely of steel and has a dead weight of 800 kg - Mobile with pallet truck Own weight 800 kg Very good condition Price without lifting gear

Condition: used, Pneumatic press, compressed air press BOSCH type Manufacturer no.: Year of manufacture: 1980 Pressing force: 18 kN = 1.8 t at 5 bar 15 kN = 1.5 t at 4 bar 12 kN = 1.2 t at 3 bar 8 kN = 0.8 t at 2 bar 6 kN = 0.6 t at 1.8 bar Throat depth: 100 mm Ram stroke: 70 mm Table size: 245 x 200 mm Ram face: Ø 45 mm Max. installation height: 235 mm Dcjdsh U Dtujpfx Ah Usp Clamping pin bore: Ø 20 mm with clamping screw Compressed air requirement: 5 bar - Pressing force infinitely adjustable via pressure regulator - Pneumatic cylinder with ram adjustable in height by 90 mm - Pneumatic dual-hand control - Mounted on a metal frame with wooden boards Required floor space (L x W x H): 1050 x 700 x 1600 mm Weight of pneumatic press: 82 kg Weight including table frame: 140 kg In very good condition