Used assembly systems & assembling machines for sale (103)

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 14 kg, warranty duration: 12 months, input voltage: 230 V, total length: 420 mm, total height: 450 mm, total width: 245 mm, volume flow: 420 m³/h, Equipment: chassis, low noise, Fume extraction with remote control and suction hose Air inlet interface ρm flange Max. Power 300W Air velocity 24/ms Filtration efficiency 0.3 µm / 99.97%. Noise 59ᐸdb Length of suction hose 1.5M System shear flow approx. 420m³/h Dimensions L420 x B245 x H450 Weight 14.0kg Application: This product is suitable for places dealing with air pollution such as smoke, peculiar odors, dust, toxic and harmful gases generated during soldering process, laser marking and engraving, printing, etc. - Extraction unit for use in the workplace - Separately replaceable fine dust pre-filter M5 - Large HEPA H 13 filter surface with 2.4m² for optimum particle filtration and long filter service life - Activated carbon for effective gas cleaning - Portable extraction unit, for flexible placement directly under or next to the workplace - Easy filter change - Variable power control through percentage speed settings in 10 steps Hnelhcdoxrgl Iowxsr - Health protection through electronic filter monitoring and filter alarm - Long service life thanks to high-quality EC blower - Quick, easy and stable installation thanks to Easy-Click system

Condition: good (used), Year of construction: 2007, functionality: fully functional, Nordson Asymtek Axiom X-1020 fluid dispensing system: Positioning & Accuracy * Drive System: Linear encoded X-Y drive system with a closed-loop control circuit. * Accuracy: High precision up to ± 0.050 mm. * Sensors: Equipped with sealed glass linear encoders for accurate position measurement. [1, 2] Dispensing & Valve Options * Valve Compatibility: Suitable for advanced dispensing heads such as the DJ-9000 / DJ-9500 DispenseJet (for non-contact jetting) and the DP-3000 or DV-7000 Heli-flow pumps. [2, 3, 4] * Process Control: Patented Mass Flow Control (MFC) and Calibrated Process Jetting (CPJ™) modules for automatic weight measurement and fluid flow adjustment. [5, 6] * Applications: Optimal for flip-chip & CSP underfill, dam-and-fill, die-attach, and thermal paste applications. [2] Electrical & Pneumatic * Power Supply: 180–260 VAC (adaptive for 200–240 VAC), single-phase, 30A, 50/60 Hz. * Air Pressure: Requires a minimum of 6.2 bar (90 psi) stable compressed air supply. * Heating: Integrated substrate heating (pre-dispense, dispense, and post-dispense stations) for a stable thermal environment. [5, 6, 7] Dimensions & Weight * Machine Weight: Approximately 435 to 490 kg, depending on the exact internal configuration. * Certifications: Complies with international industry standards such as CE, SEMI-S2, SEMI-S8, and SMEMA. [5, 7] Hnslhcezundksdwxsr

Condition: ready for operation (used), An Asco Rail assembly and disassembly stand for brake slack adjusters with a functional testing device is available. Operating pressure: 6bar, max. test force: 100kN, cylinder stroke: 300mm. Documentation available. An on-site inspection is possible. Hnolhcezf Nbrodwxer

Condition: ready for operation (used), Year of construction: 2022, An assembly line (workpiece carrier assembly system) item Bayern GmbH for loading, assembly, and (return) transport of workpiece carriers with two Deprag screwdrivers is available. Assembly principle: Karakuri (non-driven material flow principle), max. load: 30kg, max. stroke: 2630mm, max. speed: 1.63m/s. Assembly station dimensions X/Y/Z: approx. 12850mm/3350mm/2950mm, weight: approx. 1600kg, lift system dimensions X/Y/Z: approx. 9700mm/3350mm/1600mm, weight: approx. 400kg, control: item C3-05. The system is modularly adjustable at any time and complies with standardized industrial standards. Documentation available. An on-site inspection is possible. The system is dismantled. Holhcdwjw Dfhnoxonr

Condition: ready for operation (used), Year of construction: 2018, A custom-built wide brush ferrule mounting stapling machine for mounting the brush ferrule onto the handle and for mechanical fixation by staples is available. Stapling units top/bottom: 1/1, brush widths: 25mm/50mm/75mm/100mm, additional brush sizes: 35mm/60mm. Documentation available. An on-site inspection is possible. Hnjlhjyr Rw Aecdwxor

Condition: excellent (used), Year of construction: 2024, operating hours: 50 h, Lamella Production Machine The automatic acoustic panel stapler is equipped with an advanced three-axis NC control system, providing exceptional precision and flexibility in the manufacturing process. Below are the detailed advantages of each axis: 1. X-Axis: Precise Stapler Positioning Along the Horizontal Axis - The X-axis ensures accurate horizontal positioning of the staplers along the panel. This guarantees that staples are precisely applied at designated points, ensuring consistent stitching quality across the entire length of the panel, regardless of its size. 2. Y-Axis: Vertical Movement Hnolhcey Sw I Nedwxjr - The Y-axis allows vertical movement of the stapler, enabling stapling at various locations on the panel, regardless of its dimensions or shape. This enables the stapler to work with non-standard sized panels while maintaining full accuracy. 3. Z-Axis: Depth and Stapling Force Control - The Z-axis controls the depth and force with which the staples are driven into the panel. This allows the process to be precisely adjusted according to the thickness and hardness of the acoustic panel material. As a result, staples are embedded with optimal strength, ensuring the durability and aesthetics of the finished product while minimizing the risk of material damage. ### Automatic Changeover Automatic changeover is a key feature that significantly enhances production efficiency. With this function: - Changeover of the X, Y, and Z axes is fully automatic. ### Production Process Optimization Integration with production management systems such as MES (Manufacturing Execution System) and ERP (Enterprise Resource Planning) enables: 1. Full Control Over the Manufacturing Process: - Thanks to MES and ERP integration, every stage of production can be fully monitored and managed. 2. Optimization of Media and Material Consumption: 3. Optimization of Production Plans: ### Significant Relief for Operators Automation of the acoustic panel stapling process directly reduces manual workload: - Elimination of manual control requirements - Increased work efficiency ### Capability to Develop Algorithms for Media Demand Analysis Thanks to advanced integration with manufacturing management systems, the stapler allows for the creation of sophisticated algorithms to analyze production media demand: 1. Media Demand Analysis: 2. Adapting Production to Variable Conditions: ### OEE (Overall Equipment Effectiveness) Analysis The stapler also facilitates advanced OEE analysis, a key performance indicator in production operations: 1. Comprehensive Production Monitoring: 2. Automatic OEE Calculation: - The MES system automatically calculates the OEE value based on collected data, allowing immediate assessment of the stapler’s operational efficiency. This tool enables rapid identification of areas requiring optimization, such as downtime reduction, product quality improvement, or machine performance enhancement. 3. Early Detection of Problematic Areas: 4. Optimization of Production Plans: ### TPM (Total Productive Maintenance) and Automated Condition Monitoring The stapler also supports the implementation of TPM philosophy, focusing on maximizing machine efficiency and reliability...

Condition: ready for operation (used), functionality: fully functional, A good used Hopper Feeder fopr feeding small parts into assembly machine or feeding a bowl feeder with bulk parts - stainless steel conveyor - flighted belt (comes with a second spare belt also) - three phase geared drive unit - 24 V DC sensors (2) for control of belt index if required Ready to ship worldwide More pictures and videos available upon request Hjlhcdwew D Ev Ejxenr

Condition: used, Year of construction: 2008, VP 800 Year 2008 Hjleztplaohcdwxsnr Working condition Cooler is refurbished in 2024

Condition: used, Quantity: 4 available Manufacturer: Cleco Model: 18EPE06Q Product Type: Electric Precision Screwdriver Condition: Used Design: Pistol-grip Application: Industrial assembly Drive: Electric Hnslhcozlua Todwxer Use: Screwing operations with controlled torque Suitable for: Production workstations Industrial version: Yes

Condition: like new (used), Year of construction: 2026, operating hours: 200 h, functionality: fully functional, overall weight: 59 kg, input voltage: 230 V, total length: 1,330 mm, total height: 1,028 mm, total width: 568 mm, For sale is a professional, indirect-fired oil-fired heater, APEX model BGO-80B (Type 56217), 80 kW heating capacity, manufactured in 01/2026, complemented by an external 1000-liter fuel tank system with an approved steel spill containment basin (manufacturer Dübi AG) including connecting lines. Application: Heating and drying of halls, workshops, greenhouses, storage rooms, and outdoor areas in the construction and agricultural sectors. Not suitable for closed rooms without ventilation. The unit has an integrated 69-liter tank system but can optionally be connected directly to the supplied external 1000-liter fuel tank system via the existing oil-resistant, reinforced connecting lines (Ø 10 mm, 2 m length). This allows for significantly longer continuous operation without refilling. Buyers who only need the heater can forego the external fuel tank and use the internal 69L tank system. Heater features: Integrated electronic thermostat with digital display (setpoint/actual value setting) Additional external room thermostat with a 10 m connection cable (remote measurement/control) Automatic electronic ignition with flame monitoring Danfoss injection pump, stainless steel combustion chamber with fan cooling External, easily accessible fuel filter Chassis with extra-large wheels and handle Removable exhaust stack (Ø150 mm) for direct connection to an exhaust pipe Heljzrwapehcdwxenr Technical data of the heater: Parameter Value Model APEX BGO-80B (Type 56217) Heating capacity 80 kW / 68,800 kcal/h Fuel Diesel / heating oil Consumption 7.5 l/h Mains voltage 230V ~ 50Hz Fan motor 900 W Blower capacity 2,000 m³/h Blower outlet diameter 340 mm Flue connection Ø150 mm Tank capacity (internal) 69 l Dimensions (L x W x H) 1330 x 568 x 1028 mm Weight 59 kg Year of manufacture 01/2026 Protection class IPX4 External fuel tank system (included): Plastic tank, 1000 liters, with level indicator Steel spill containment basin "Dübi", 100% retention volume, EAGS certificate, manufacturer's serial number 199890 2x connecting lines, Ø10 mm, 2 m, oil-resistant/reinforced (compatible with internal or external tank) Total scope of delivery: 1x APEX oil-fired heater 80 kW with thermostat, digital display, and exhaust stack 1x external room thermostat including 10 m connection cable 1x 1000L fuel tank system with steel spill containment basin 2x connecting lines Ø10mm, 2m Condition: Well-maintained, very little use (approx. 200 operating hours), fully functional. Location: 6064 Kerns, Obwalden

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: E-018455, Two units are for sale. Hnslhcdezqvafowxjr One in blue and one in green. The price quoted is for one unit.

Condition: used, Year of construction: 2017, Operational condition SPI machine. Hjlhcjw Ty Rbodwxonr Ask for specification!

Condition: used, Available: 2 units Manufacturer: Cleco Model: 18EAE08AL2 Product type: Electric torque screwdriver Condition: used Design: Angle screwdriver Application area: Industrial series assembly Hnslhcezi Dxyodwxsr Drive: electric Use: Controlled screw assembly Suitable for: Production and assembly lines Industrial design: yes

Condition: used, Manufacturer: Cleco Model: 18EPE12Q Product type: Electric precision screwdriver Condition: used Design: Pistol-grip Application area: Industrial assembly Holhcozi Dwpsdwxonr Drive: electric Use: Screwing operations with controlled torque Suitable for: Production workstations Industrial design: yes

Condition: good (used), Year of construction: 2006, functionality: fully functional, Specifications (See Details above for installed options) *Assembleon Philips Topaz Rated CPH Optimal placement rate: 14,000 cph Simultaneous pick Nominal placement rate: 9,000 - 11,000 cph *Applicable Components: 0402 - SOP, SOJ, PLCC 25 mm (1.0") with Line Sensor Camera QFP 21 mm with pin pitch down to 0.65 mm (25 mil) Line sensor camera system QFP 32 mm (1.26") with pin pitch down to 0.5 mm (20 mil) Optional area CCD camera system *Max. component height: 6.5 mm *Philips Topaz Mounting accuracy: (x,y) 3s 0.08 mm for chips and SOIC Line sensor camera system 0.06 mm for QFPs Using Precision Head and optional Area CCD camera system Hslhcjznmfajdwxenr *Mounting angle: 0 up to ± 180 (steps of 0.01) *Alignment system: Line sensor camera with front lighting system for Vision-on-the-Fly image processing by VICS 2500 proprietary vision system -Second Line sensor camera for rear side is optional -Area CCD camera for fine pitch components Optional -Area CCD camera for fiducial alignment Standard *Type of nozzles: Type 31 Type 31-1 (Precision Head only, spring loaded) Type 32-2 Type 33 Type 34 Type MELF -The nozzle types for Topaz and Emerald are the same. *Nozzle exchange station: 12 nozzle positions Optional (No nozzles included) *Number of heads: One single beam with 8 exchangeable nozzles Including one Precision Head *Placement heads actuation method: Pneumatic or servo controlled for component height compensation *Number of Tape Feeders: 8 mm: 100 positions 12 mm: 48 positions 16 mm: 48 positions 24 mm: 32 positions 32 mm: 32 positions 44 mm: 24 positions 56 mm: 18 positions Stick feeders: Depends on stick dimensions Bulk feeders: 100 x 8 mm positions General Specifications *Component Packaging: Tape according to IEC/EIA-J/JEDEC: 8-56 mm Tape reel diameter max: 380mm (15") *Manual Tray feeder: Max. tray size 320 mm x 320 mm (12.6" x 12.6") Optional: Manual tray feeder *Fixed Manual Tray Feeder: Max. tray size 635 mm x 136 mm (25" x 5.3") Optional: Fixed manual tray feeder (Max. board size 250 mm (10") -Optional 558 mm x 508 mm (22" x 20"). *PCB Thickness: Min. 0.6 mm (0.02") Max. 3.0 mm (0.12") *Non-mountable area: -Board Top side: 3 mm from rear side board edge (0.12") 0 mm from front side board edge 3 mm around reference holes (0.12") (for locating pins) Component height restrictions apply in the 10 mm (0.4") area from front side edge depending on board thickness -Board bottom side: 5 mm from front and rear side board edge (0.2") For Ceramic boards (optional) the non-mountable area can be different *PCB Material: Phenolic/FR4/Composite Materials Ceramic boards require special conveyor sections (optional) *PCB Positioning: Locate pin fixation Adjustable Push up pins Adjustable Edge clamping Adjustable Sub stop (PCB waiting buffer) Adjustable *PCB Transport height: 900 mm ± 10 mm (35.4" ± 0.4") Standard SMEMA 953 mm ± 12.5 mm (37.5" ± 0.5") Standard *PCB Ratio width/length: Max. 1:3 *Philips Topaz Machine dimensions and weight: Length: 1655 mm (5.4 ft) Height: 1865 mm (6.1 ft) Width: 1358 mm (4.5 ft) Width including feeders 2194mm (7.2 ft) Weight: 1150 kg (2535 Lbs)

Condition: excellent (used), For sale is a professional Dr. TRESKY AG T-3000-FC3 station, manufactured by a renowned Swiss company. This is a high-quality laboratory device designed for the precise assembly and positioning of semiconductor structures (Die Bonding / Flip-Chip Assembly). It is used in research laboratories, as well as in the production of electronics, photonics, optoelectronics, and microelectronics. The T-3000-FC3 model is one of the most versatile platforms from Tresky and enables the execution of both basic and advanced assembly processes. Technical specifications: Manufacturer: Dr. TRESKY AG Model: T-3000-FC3 Country of manufacture: Switzerland Type: manual Die Bonder / Component Placer FC3 Bond Force Control controller Olympus SZ51 stereoscopic microscope Precision XY table Bond force control Helhcdjzi Upcjwxenr Vacuum and pneumatic system LED work lighting Documentation included Numerous working tips, holders, and accessories as shown in the photos Applications The device is used for: assembly of semiconductor devices (Die Bonding), Flip-Chip technology, assembly of MEMS components, production of photonics and optoelectronics, assembly of VCSEL lasers, assembly of sensors and hybrid circuits, research and development work and prototyping. Condition The device is sold with extensive equipment as shown in the photos: Olympus microscope, FC3 controller, documentation, drawers with accessories, set of tools and working tips, pneumatic components and accessories. The visual condition is very good. It is sold exactly in the configuration shown in the photos.

Condition: used, Quantity: 4 available Manufacturer: Cleco Model: 18ESE12D3 Product type: Electric torque screwdriver Condition: used Design: Inline screwdriver Application: Industrial series assembly Drive: electric Use: Controlled screw fastening Suitable for: Production and assembly lines Industrial design: yes Helhcszhnzcedwxonr

Condition: excellent (used), functionality: fully functional, Complete line hydraulic through-feed clamping system for furniture conveyor belts for automated handling shuttle Hnelhcozk Tquodwxer 2 tilters

Condition: excellent (used), MDS Type: MDS A220-PD MDS A220-PD Manual Assembly Station The A220-PD assembly system is a stationary manual assembly station for processing press-fit components. Holhcdozgr I Rowxjnr Intended use: The machine is used for press-fitting connecting elements. The operator manually places the corresponding screws, plastic nuts, and the component to be processed into the machine. The operator then starts the press-fitting process using a foot switch. The press-fitting process runs automatically. Connecting elements: Press-fit nut, rivet nut, self-piercing nut, press-fit pin, punching pin/rivet pin Thread size: M5, M6, M8, M10, M12 Technical data: Control voltage: 230V/10A Connection plug: HAN 10, not wired Temperature ranges: Transport: -20°C to +60°C Operation: +10°C to +40°C Storage: -20°C to +50°C Compressed air connection: Operating pressure: 6 bar Quality: Treated, water-free, and oil-free air Connection: 1/2" connection thread Machine dimensions: Length (L): approx. 824 mm / Height (H): approx. 1800 mm / Width (B): approx. 600 mm Values apply to a working height (AH) of 1000 mm. Pneumatics: Standard: Manufacturer SMC Variant: Manufacturer FESTO Control: Standard: Manufacturer B & R Variant: Manufacturer Siemens Machine type: C-frame A220-PD Continuous sound pressure level (LpA): 78 dB Operating modes: The operating modes can be changed in the control panel. Automatic mode: The press-fitting of the connecting elements takes place in automatic mode. Movements are only initiated when the operator presses the foot pedal and thus triggers the press-fitting process. Manual mode: In manual mode, adjustments are made to the machine. In this operating mode, movements can be activated individually. Weight: Approx. 600 kg Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: like new (used), Year of construction: 2025, Hot wire cutting system Manufacturer: MANZ Hnolhcdwjznli Dsxjr PLC control, touch screen display, Siemens

Condition: used, 🧰 Product Features • Manufacturer: Blume • Condition: used, see photos • Color: galvanized • Length: extendable up to 6.2 m • Width: 75 cm • Height: adjustable from 73 – 113 cm • Roller diameter: 5 cm • Total roller width: 60.5 cm • Load capacity between 2 supports: 120 kg • Conveying weight: max. 35 kg • Swivel casters: 8 pieces with brake • Special features: height adjustable, extendable, movable 💰 Price €1590,- net excluding VAT • Quantity discount: upon request • Shipping costs: available throughout Europe upon request • Delivery time: immediately available • Inspection and collection: possible at any time by appointment Constantly over 5000 linear meters of pallet racking from numerous manufacturers in stock (Changes and errors in technical data, specifications and prices, as well as prior sale reserved! See our terms and conditions, all prices excl. VAT, ex warehouse.) Lenox Trading – Top warehouse technology & heavy-duty racking, used & new Description: Are you looking to buy high-quality warehouse shelving? With around 100 employees, Lenox Trading is one of the largest dealers of new and used warehouse technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 linear meters of shelving immediately available • 20,000 m² of storage platforms & steel construction platforms immediately available • 30–50 semi-trailer trucks of goods turnover weekly for maximum selection 📦 OUR RANGE (BUY CHEAPLY ONLINE): Whether pallet racking, heavy-duty racking, high-bay racking, shelving units, tire racks, or shelving for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, dismantling and assembly. 🏭 TOP BRANDS, USED & FROM INSOLVENCY / BANKRUPTCY LIQUIDATION: • SSI Schäfer (Schäfer Lagertechnik, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, heavy-duty racking Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi Cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND PILLAR: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearing orders, we offer a complete, all-round package: 1. Fixed-price purchase: purchase of merchandise, equipment & entire inventory, including complete clearing. Hnjlhcjyxnmiodwxor 2. Commission auction: carrying out auctions on behalf of others. Our full service provided by our own employees: cataloging, office preparation, inspection, goods handover, logistics, dismantling and complete handover. Whether you became aware of us through heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking system – we guarantee the best conditions. Contact us for a non-binding offer!

Condition: used, functionality: fully functional, “Functionally tested; item comes from the dismantling of equipment from an automotive supplier.” Available quantity: > 10 units Manufacturer: Cleco / Apex Tool Group Type: TSE 961446PT Hnelezggx Dohcdwxsr Voltage: 380 V DC Current: 2–10 A DC Operating temperature: –20 to +70 °C Humidity: 0–90 % without condensation You can also find the corresponding screw control unit with us!

Condition: used, From the dismantling of a production facility belonging to an automotive supplier, professionally disassembled. Quantity available: > 10 units Brand: CLECO Series: MPRO400GC Voltage: 230 V AC Hnelhcezggqasdwxsr Frequency: 50/60 Hz Rated current: 2 A Power: Typically 250 VA Protection class: IP42

Condition: used, Year of construction: 2019, Operational condition UV curing oven! Hslhcdwezl Syksxjnr

Condition: used, Year of construction: 2019, Opertional unit! Hnelozlyx Uohcdwxjr