Used Assembly Accessories for sale (25,609)

Condition: not inspected (used), 1 item: Assembly frames, metal, dimensions: 1,500 x 1,500 mm, without contents, (12 pieces) Lredpfxezg D Naj Acnen

Condition: used, used, in excellent condition Manufacturer: Fried Extraction connection: 120 mm Warehouse location: 97447 Gerolzhofen, free loaded, unpacked Handover in current condition, as inspected Without warranty or guarantee Ljdpfxezg Nlye Acnjrn

Condition: excellent (used), Unused Ingersoll Rand QM Series Nut Runner - interconnecting cable and controller Lrodpfx Acewric Eensn

Condition: used, Year of construction: 2008, operating hours: 13,000 h, functionality: fully functional, Pfeiffer Vacuum GmbH Turbomolecular pump with electronic drive unit, ProfibusDP gateway and accessories, PM P03 020 GA, TPH 2101 P + TIC 250 Model Turbomolecular Pump: PMP03020G, TPH2101P Model Gateway: TIC250 Turbo molecular pump: Serial number: 14219214 YoM: 2008 Nominal connection size inlet: DN 250 ISO-K Nominal connection size outlet: DN 40 ISO-KF Flood connection: G1/8" Rated speed: 31.500/min (525Hz) Pumping speed N2: 1.900l/s Max. Prevacuum pressure N2: 1,5mbar Max. Prevacuum pressure He: 1,0mbar Max. Prevacuum pressure H2: 0,5mbar Oil: PM 016 144-T Note on condition: 1. statements on the operation hour time is about 13,000h with about 1,600 start-up and shut-down. 2. process gases: nitrogen and argon Lrsdjncd S Ujpfx Acnjn 3. process dusts: chromium nitrite and steel 100Cr6 4. the pump was stored fully functional in 2018 and externally cleaned.

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: Maschinen-Nr. F4UT3901, travel distance X-axis: 700 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, quill stroke: 100 mm, rapid traverse X-axis: 3 m/min, rapid traverse Y-axis: 3 m/min, rapid traverse Z-axis: 1 m/min, total height: 2,120 mm, total width: 2,115 mm, total length: 2,220 mm, table width: 500 mm, table length: 900 mm, rotational speed (max.): 3,150 rpm, rotational speed (min.): 63 rpm, overall weight: 2,550 kg, Equipment: documentation/manual, For sale is an EMCO FB-6 milling machine. Accessories include: 2 hydraulic machine vises, a mobile sliding door cabinet for milling tools including 17 milling tool holders, a tool drawer cabinet with approximately 150 different milling cutters, and a wing door cabinet with various milling cutters. Take the opportunity to inspect the machine under power on-site and see its condition for yourself. Lrodoyka Rcjpfx Acnen

Year of construction: 2023, condition: used, Pressing force 53 t stroke 300 mm control Siemens Pneumatic system pressure 6 bar Maximum supply pressure of the pneumatic system 10 bar Pressure in the hydraulic system 255 bar Dimensions (HxWxD) 3.200 x 2.500 x 2.350 mm weight 8.000 kg In our assessment, the bushing press is in like-new condition. Technical features: - Bushing pressing including plastic deformation - TOX pneumatic-hydraulic actuator with 53t pressing force at 6 bar - 300mm stroke - Siemens control Lodpfx Aezbvm Iscnsrn Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, Year of construction: 2023, voltage 400V, 50Hz V current intensivity 40 A output 15 kw Lrsdpfjzbvmhjx Acnjn operating pressure 4,5 bar weight 1.600 kg In our assessment, the assembly system is in like-new condition. Technical features: - Assembly system for pressing individual parts into a battery cooling plate - Pressing process using pneumatic cylinders and servo motors - Pneumatic suction of the cooling plate - Siemens control Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale reserved.

Condition: good (used), Code: 0407 Brand: OMGA Model: BA 525 A - CE Standard Hardware assembly center for door and window frames - CE Standard Lsdpfx Aozcqxnjcnern Technical data: Work table covered with felted scratch proof strips , rear part pneumatically inclinable from 0° to 10° with intermediate angles Composition: Carriage with self-fed pneumatic screwer with Böllhoff loader, work stroke controlled by a pneumatic cylinder with a inclusion-exclusion system , height adjustment Right/left backstops for height positioning of right/left handle holes Drilling unit with 3-bit head for the execution of handle holes Pneumatically operated hydraulic shear for cutting hardware Work table size mm 3500 x 1230 Work table height mm 920 Max working dimension mm 2800 x 2450 Min working dimension mm 350 Dust collector Working pressure 6/7 bar Overall dimensions mm 3600 x 1700 x 1000 h Weight kg 480

Condition: good (used), functionality: fully functional, Internal article number: 26047 Universal milling machine Thiel Duplex 158 + Accessories (Various tool holders, including various MK4 holders (reduction from basic holder to MK4 available)) + 2-axis digital display Heidenhain + Operating manual + Coolant pump Speed: 90 - 1800 RPM Travel: X 400 / Y 200 / Z 400 mm Feed rate: 10 - 160 mm/min Lredpfxezb I Nzs Acnen Rapid traverse: 900 mm/min Power: 1.6 kW / 380 V L x W x H: 150 x 150 x 175 cm Weight: 1300 kg The machine is fully functional and can be inspected under power by appointment in our heated warehouse, which covers an area of over 500 m².

Condition: ready for operation (used), An Asco Rail assembly and disassembly stand for brake slack adjusters with a functional testing device is available. Operating pressure: 6bar, max. test force: 100kN, cylinder stroke: 300mm. Documentation available. An on-site inspection is possible. Lrodpfx Acjzf Nbronjn

Year of construction: 2021, condition: used, EV Car Rotor Assembly Line (2021) Designed to produce rotors in the height range 300–460 mm Including manual, semi‑automated, and automated operations Cycle time: 86 s Manufacturer: TeamTechnic (Nextomation) Stations and Equipment Rotor package and shaft loading, shrinking, and cooling KUKA KR120 R3900‑2K/FLR robot (2021) with camera system 3x semi‑automated material infeed for rotors (high and low versions) 3x semi‑automated material infeed for metal sheet packages Automated sheet‑metal package heating and shaft insertion Rotary table with 6 heating stations, up to 300 °C Rotor pressing, locking, and laser marking Automated pressing with 10 T Kistler press and package locking using a Bosch 4GE 59 screwdriver (90 Nm) Laser marking with Arex 420 laser Resin application and large magnet assembly Manual magnet belt feeding on trays Automated large magnet insertion and sealing Lrodszc N H Dopfx Acnsn Scheugenpflug LiquiPrep LP 804 resin dispensing unit Resin application and small magnet assembly Manual magnet belt feeding on trays Automated small magnet insertion and sealing Scheugenpflug LiquiPrep LP 804 resin dispensing unit Resin gelling and curing Automated operation for 150 pcs at 200 °C WPC tooling preparation station Press plate cleaning station Package unlocking, resin level, and magnet position control Automated assembly tool removal with a Bosch 5DMC530 screwdriver (90 Nm) Resin level and magnet position control Balancing Automated balancing with pin insertion and verification KUKA KR120 R3100‑2/FLR robot (2021) 2x Schenk eTeno balancing machines (2021) 2x 1.5 T Kistler presses Spinning Automated aging and working‑condition simulation up to 120 °C KUKA KR120 R3100‑2/FLR robot (2021) 3x Hoffmann ESV25‑AR2 spinning stations (2022) 4x cooling tracks Final balancing Automated balancing with pin insertion and verification KUKA KR120 R3100‑2/FLR robot (2021) 2x Schenk eTeno balancing machines (2021) 2x 1.5 T Kistler presses

Year of construction: 2021, condition: used, EV Car Stator Assembly Line (2021) Designed to produce stators with a height range of 100–210 mm and a diameter of 160 mm Including manual, semi-automated, and fully automated operations Cycle time: 86 s Stations and Equipment End Plate Sub-assembly (Gluing) End plate Loctite gluing onto metal sheet stack and laser marking Grob semi-automated assembly machine (2021) Keyence laser Stator Stack Preparation Stator stack preparation (loading) and height measurement 7 metal sheet stacks with a height of 25 mm loaded on a rotating table Slot Insulator Insertion U-shaped paper insulator insertion Grob automated assembly machine (2021) Insertion of 48 “U”-shaped paper insulators 3x Winding Stations 3x copper wire winding stations, wire fed from barrels Grob automated assembly machines (2021) Maximum number of wires: 15 Insulation Tube Assembly and Cutting 6 manual stations for insulation tube assembly 1 cutting station connected via conveyor 2x Wire Pre-forming 2 automated wire pre-shaping stations 2T Kistler press Phase Separator Assembly 6 manual phase separator assembly stations between coil assembly stations, connected via conveyor 1 rotating station for stator cradle rotation 8x Stator Hot Crimping Preparation Lodpfezc N Axsx Acnorn 8 manual stations for stator hot crimping preparation 2x Connector Hot Crimping 2 electric welding machines with force and current measurement Lingl PZ5 welding machines (2021) 10x Final Forming Preparation 10 manual stator final forming preparation stations Final Wire Forming Wire shaping using a 2T Kistler press 2x Lancing 2 Grob automated stator lancing machines (2021) Lancing for stator heights of 140 mm and 210 mm Phase Separator Cutting Station Teknomatik semi-automated stator lifting and pre-cutting machine Stator Stack Skewing and Laser Welding Automated skewing, laser welding, and laser marking KUKA robot KR 250 R2700-2/FLR (2021) TRUMPF TruDisk 4002 welding laser (2021) End-of-Line (EOL) Electrical Measurement Semi-automated stations for high- and low-voltage testing ETL ATS 400 automatic test system ZAW resistance measurement tester (2023) Heat Shrink Tube Assembly Prospertech semi-automated stations for heat shrink tube placement on wires Stator Resin Impregnation Automated Tecnofirma resin application and heating process Includes: 1x induction heating zone 1x pre-heating zone 5x impregnation zones 2x infrared lamp zones 1x gelation zone 1x curing zone Integrated Minimax firefighting system KUKA robot KR 150 R2700-2/FLR (2021)

Condition: used, Year of construction: 2004, Feeder slots in front 40pcs. Back side feeder slots 10pcs and tray solution up to 20 pcs of component trays. Lodpezf H Snsfx Acnorn Feeders included: o 6 pcs 8mm tape feeders o 18 pcs 12mm tape feeders o 16 pcs 16mm tape feeders o 7 pcs 24mm tape feeders o 3 pcs 32mm tape feeders o 4 pcs 44mm tape feeders o 1 pc 56mm tape feeders

Condition: used, functionality: fully functional, load capacity: 5,000 kg, Accessories Ljdpfxow Ez Tpe Acnorn ISO class: ISO class 3 = 2,500 - 4,999 kg Condition: As new Technical condition: very good Description: Adapter ISO 3A (51 cm) to ISO 4A (61 cm) Capacity 5,000 kg Width 1,500 mm ID OS1699

Condition: excellent (used), Year of construction: 2026, The ST-1900 universal semi-automatic pallet assembly table is a simple and cost-effective version of a semi-automatic production station, designed for companies that want to achieve a higher level of efficiency while maintaining low investment costs. Lrsdezgc Smjpfx Acnen The table is equipped with a pneumatic pallet lifting system and pneumatic combs for positioning the horizontal boards, which significantly simplifies and speeds up the operator's work. By maintaining a simple and uncomplicated table design, manual effort is reduced and the ergonomics of the workstation are improved. Despite the use of pneumatics, the Pneumatico ST-1900 remains a device in the basic segment – it is an economical solution for small and medium-sized manufacturers who need to increase production repeatability and speed. The table allows for flexible work with popular pallet formats and is suitable for both the production of disposable pallets and standard pallet designs for less demanding customers.

Condition: excellent (used), Year of construction: 2026, functionality: fully functional, The ST-1400 universal manual pallet dismantling table is the simplest and most affordable version of a pallet dismantling station, designed for start-up companies or small manufacturers who do not yet require automation. It is a fully manual workbench with manually extendable "combs" for supporting and positioning the horizontal boards. It allows working with pallets with a maximum length of 1400 mm and a working height of up to 1200 mm. Unlike more advanced systems, the Pneumatico ST-1400 does not have pneumatics or automatic clamping devices – all operations are performed manually, which significantly reduces the purchase and maintenance costs, but at the same time means a basic level of equipment, simpler than semi-automatic industrial tables. This solution is particularly well-suited for the production of disposable pallets and for less demanding customers, where low production costs and fast, uncomplicated production are key. It is an ideal choice for small workshops and small-batch production, where simplicity, flexibility, and low initial investment are important. Ledpfx Acozgc R Aonsrn

Condition: like new (used), Year of construction: 2018, The SEHO System 8140 PCS is a professional and extremely reliable industrial wave soldering machine. These systems are used in the electronics industry for soldering Through-Hole Technology (THT) printed circuit boards, including lead-free processes. The main features and specifications of the SEHO 8140 PCS on a carrier system type: Wave soldering system with continuous transport. Maximum soldering width: 400 mm. Fluxer: Equipped with an ATS spray fluxer or foam fluxer for extremely precise and economical dispensing. Preheat: Modular and powerful preheating zone (often expandable with IR, convection, and quartz) to gradually bring the printed circuit boards to temperature. Lsdpfx Aozdggkecnjrn Solder bath: Designed for both lead-containing and lead-free alloys (such as SAC305), often equipped with local nitrogen inerting to prevent oxidation. Control: Equipped with an industrial PC or microprocessor control (PCS - Process Control Software) that allows parameters such as transport and pump speed to be accurately stored and programmed.

Condition: excellent (used), 4 pcs 1st generation trolley Ljdpfxszdfzgs Acnsrn 4 pcs 2nd generation trolley 132 pcs 1st generation 8mm feeders 12 pcs 1st generation 12 mm feeders 4 pcs 1st generation 16 mm feeders 1 pcs 1st generation 24 mm feeders 2 pcs 1st generation intelligent trolleys

Condition: new, Spare parts, accessories, and expert support for your GUBISCH machines. Lodjzdglgjpfx Acnsrn

Condition: ready for operation (used), Production line for cell stacks for 48 V hybrid vehicle batteries Aumann production line for cell stacks for 48 V batteries of the 2nd generation – manufactured in 2023, little used. Assembly – testing – installation of cell stacks into housings for hybrid vehicles. Manufactured in 2023 and little used. Some units are assembled, others are in their original delivery condition. Maximum Battery Size Size: 363 × 175 × 140 mm Maximum Capacity Standard/Performance – 8 Ah / 17.5 Ah The system consists of 7 units that are linked together. 2 images are provided for each system/unit – a separate handout is available for each. Please provide us with your offer price! Lodpfx Acszavwdenorn Technical data can be found in the handout. Any warranty claims are excluded. We assume no liability for the accuracy of the technical data and year of manufacture, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements mentioned in the accident prevention regulations. No sales to private individuals.

Condition: used, functionality: fully functional, Year of construction: 2006, load capacity: 45,000 kg, empty load weight: 4,200 kg, total length: 10,000 mm, Accessories Mast type: None Ledpfx Acsu Dzv Hensrn Condition: Ready for use and fully functional Technical condition: very good Description: In addition to this --make-- model, we have approx. 200 heavy-duty forklifts, compact forklifts, forklift trucks & sideloaders in our warehouse in Hamburg and Gdansk. Visit our homepage - sago-online Hire purchase & financing at favorable conditions are always feasible for us. We are also happy to buy your used truck free of charge, even without you purchasing a vehicle from us. Our owner Mr. Peter Sawitzki will be happy to advise you in detail on this --make type-- P.S.: Our forklift master workshop specializes in repair, maintenance, overhaul and special construction for forklifts from 8 tons. We are also happy to display your vehicle for sale on consignment.

Condition: new, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 747895.1, overall weight: 174 kg, For robot use. Pressing force: 55 kN Total stroke: 98 mm Power stroke: 7 mm The Tox Pressotechnik TZ 05.747895 is a hydropneumatic clinching pliers developed for precise and reliable joints in sheet metal processing. Lrjdjvb Icdjpfx Acnen With its innovative technology, it enables the efficient joining of metal parts without additional materials such as welding rod or adhesives. The pliers offer high force transmission and ensure consistent results, even with complex geometries. Thanks to its ergonomic design and user-friendly handling, it is ideal for use in series production as well as in single-part production. The robust design ensures durability and ease of maintenance, while the compact size allows flexible integration into existing production lines.

Condition: used, from a government agency Ledpszd Hdbefx Acnorn used in top condition cleaned functionally tested Manufacturer: Panhans Table size mm: 300x280 Travel mm: 700 Stop adjustable/rotatable Workpiece clamp manual Storage location: 97447 Gerolzhofen, free loading, unpacked Handover in the current condition, as inspected, without guarantee or warranty.

Condition: used, functionality: fully functional, Year of construction: 2001, Equipment: crane, We are offering this used Portain quick-assembly crane GTMR 386B, manufactured in 2001. Outreach 50.0 m, 1,500 kg. Maximum lifting capacity 8,000 kg. Hook height 22.60 m. Complete with ballast, spindles, and plates, including HBC radio remote control. Manufacturer: Portain quick-assembly crane Model: GTMR 386B Year of manufacture: 2001 Lrjdpfx Acezd Nx Ijnjn If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: like new (used), Clamping length: 240 mm, Body diameter: 110 mm, Pulley diameter: 70 mm. Overall length: 860 mm, Spindle diameter: 40 mm. Lodslkchnopfx Acnjrn - 0704D64, HL3/1.