Used Assembly Accessories for sale (25,283)

Year of construction: 2008, condition: used, machine/vehicle number: 5024-581, Perm. ambient temperature: +0° C to +46° C Perm. relative humidity: 5% to 95% non-condensing Power input: CA 110 to 240 VAC (+/- 10%), 50/60Hz (+/-3Hz) Protection class: IP 64 Perm. angular acceleration: (55-2000 Hz) < 100 ms/s2 Crodpsmidx Esfx Ah Uji Measuring range (ball diameter): 2400 mm Single-point ball test: 0.013 mm Single-point reproducibility test: 0.020 mm 3D longitudinal measurement uncertainty test: 0.029 mm Software: interface WinRDS Weight: 7.8 kg

Condition: used, Year of construction: 1992, machine/vehicle number: 160 3205, Sale only within EU member states! No private sale MAE can be inspected. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tooling, Crsdeuxl Ezspfx Ah Uoi as well as for compliance with all safety and environmental protection safety and environmental protection requirements. Any warranty is excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tools as well as for compliance with all safety- and environmental-requirements, mentioned in the accident prevention regulations, we take over no guarantee.

Condition: used, Year of construction: 1998, workpiece weight max. 2000 gr Used weightcontrol WC2000 for die casting machines up to a unit weight of 2000 grams. Cjdpfx Ahjwx R Uis Ueri The device has been checked and repaired by the manufacturer During repair we exchanged weight cell and control.

Condition: good (used), Steel Hall 15 x 17 m – with Complete Electrical Installation, Gates, Windows & Structural Calculations For sale is a solidly built steel hall measuring 15 x 17 m with a clearance height of 4.10 m. • Year of construction: 2004 • Dismantled: 2024 – fully disassembled, ready for transport • Structure: heavy-duty steel beams, very robust • Equipment: • 2 electric entrance gates (height 4.10 m) • 1 entrance door • 3 windows with roller shutters • complete electrical sub-distribution including gate controls • lighting, sockets, switches & wiring included • Documentation: full structural calculations available ✅ Ideal as a workshop, warehouse, machinery hall or for agricultural use. ✅ All components included – ready for immediate assembly. ✅ Crane loading on site possible. 👉 Collection by buyer, price negotiable. 👉 Pictures and further information available on request. Crodpfx Asw Tcmrsh Uoi

Condition: new, Chopping body suitable for Annaburger HTS 22G.14 490 mm height Crjdpfx Ahjw S Rawo Uei internal including all fasteners and struts | Internal No.: 11118418

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, total height: 2,620 mm, table height: 1,114 mm, total width: 850 mm, total length: 1,869 mm, pressing force: 30 t, table width: 600 mm, table length: 600 mm, overall weight: 2,900 kg, Weight approx. 2,900 kg Table top size 600x600x100 mm, plus 50 mm free space behind the top up to the back of the press Fixing points of the table in 600, 800, 1000 mm. Crjdpovhcykofx Ah Uoi Ram travel 400 mm Motor 3 KW 60 liter hydraulic tank Speed downwards 10 mm/sec. Upwards 24 mm/second

Condition: used, Year of construction: 2007, Assembly Bench – Rotox mod. VPAH 3023 Pressure: 6–7 bar Weight: 480 kg Codpfx Ahoxam U Ee Uori

Year of construction: 2013, condition: not inspected (used), functionality: unexamined, controller manufacturer: Siemens, controller model: SIMATIC, No minimum price – guaranteed sale to the highest bidder! Submitting a bid constitutes an obligation to collect the item within the specified timeframe, no later than 31/07! TECHNICAL DATA Joining force: max. 60 kN MACHINE DETAILS Dimensions & Weight Machine complete, operational: 22,000 kg Crodpfxewyldne Ah Usi Base machine: 20,000 kg Pure water tank: 1,500 kg Chip conveyor: 500 kg Machine with coolant tank and chip conveyor (without chip bin) W × D × H: approx. 5.40 m × 5.95 m × 3 m Machine during maintenance (space required to open control cabinet doors): approx. 6.0 m × 6.55 m × 3 m Storage conditions Temperature: -10°C to +50°C Relative humidity: max. 80% (non-condensing) Operating conditions Temperature: 15–35°C Temperature fluctuation max.: ±2°C/12 h and 2°C/h Relative humidity: max. 80% (non-condensing) Dust content at installation site: 1 mg/m³ Installation: in a closed, draft-free room Connection rating: 63 A EQUIPMENT With SIEMENS SIMATIC touch panel With partial conveyor belt

Year of construction: 2008, condition: used, Equipment for fitting assembly 1 FAA S3 for folding, opening and opening and folding fittings for wooden and PVC casements in automatic design, working procedure from left to right - automatic clamping and positioning sash - automatically travelling screwdriver with automatic screw feed, servo-driven, working in X and Y axis - preparatory assembly table fitted with slide rails, dimensions 1,300 x 3,000 mm, including ten automatically recessed wing stops, servo-driven travelling stop for hardware cutting with PC control - Grid rack for fittings - 33 compartments, including PC compartment - PC control, floppy drive, Windows NT Wing transport device 1 for automatic wing feed for the second screwdriving cycle Device 1 for automatic height adjustment of the travelling screwdriver via PC. Device for manipulation of scissor fittings 1 for closing and hooking open scissors Hand-held reading device 1 Csdjw Tcu Njpfx Ah Ueri Automatic handing device/ 1 transfer of the forged wing to the next station ETHERNET network card 1 Number Machine name Pcs Item Automatically folding and feeding 1 table for removing the galvanised wing in horizontal position for subsequent transport and storage in vertical position into the appropriate shelving rack, for sash dimensions with a width of 350 - 1.650 mm and a height of 350 - 2,500 mm, including cabinet switchboard and SPS control Servomotor landing gear 1 and servo controller for travel of the tilting table, sorting trolley, including drive unit, max. speed 65 m /min Rail tracks 7m made of thick-walled U-profiles for roller bogies with toothed shaft for running a tiltable table and sorting trolley Compartment rack (15 compartments) 3 with automatic wing insertion, compartment width 110 mm, compartment height drawer height 2.600 mm, depth of the shelf 1.100 mm, overall width of the rack 2.130 mm Display indicator 1 to display the relevant compartment shelf, including software equipment for sorting the leaves into appropriate compartments Protective fence 1 Entrance door for protective fence 1 with limit switch

Condition: used, Article: feed tube Manufacturer: Schütte For multi spindle automatic lathes of different sizes Please, contact us for getting more information and pictures on mail(at) or Cjdjvvhtfjpfx Ah Uori *

Condition: good (used), Year of construction: 1980, Length: 1500mm Width: 500mm Height: 1500mm Weight: 900kg Credpfx Ahswry Ixj Uei

Condition: excellent (used), Epson G10-854SR Robot Assembly Station Dispensing Station The assembly station is divided into the following sub-stations: 3.1 Dispensing Area, 3.2 Assembly Area KK+SW, and 3.3 Assembly Area Front. (KK = heatsink, SW = front wall bracket) St.3.1: Dispensing Area - A workpiece carrier (WT) with mounted chassis and circuit boards is conveyed via the transfer belt into the dispensing area. - The WT is stopped at the lift-positioning unit (HuPo), raised off the belt, and secured in place - The X-Y-Z handling system moves the dispensing head to the designated position and initiates the dispensing process. - Once dosing is completed successfully, the handling system moves to the home position and the WT is placed back onto the conveyor - Transfer continues into the assembly area KK+SW (prerequisite: no WT in placement position) St.3.2: Assembly Area KK+SW - A WT transported from the dispensing area enters the KK+SW assembly area via the transfer belt. - It is stopped at the lift-positioning unit (HuPo), raised from the conveyor, and fixed in place; during this, the chassis side panels of the partially assembled component are aligned - Simultaneously, the positioning of the KK and SW tray is carried out - Both a KK tray stack (12) and a SW tray stack (12) are manually placed onto each respective infeed conveyor outside of the safety enclosure - The two safety shutters are opened and the loaded tray stacks are conveyed into the gripping position of their respective stackers - The safety shutters are then closed - The respective grippers pick up the corresponding tray - Using the Z-axis, trays are singled and transported upwards (above the actual pick-up height) - To center and stabilize the trays, a centering support is positioned beneath each tray using the X-handling system. - Using the stacker Z-axis, each tray is placed onto its centering support - The trays are now ready for component pick-up - The SCARA robot with a multi-gripper picks up the KK from the tray and places it in an intermediate alignment position (to compensate for inaccuracies in the pick-up and establish a fixed gripping point for assembly) - The KK is scanned, picked up again, and if the scanner result is OK, installed onto the WT - Non-OK KKs are placed in a non-OK container - The multi-gripper on the SCARA robot then picks up the SW from the tray and places it in the alignment position - The SW is picked up again and installed onto the WT - Continue with Assembly Area Front Technical Data Design: SCARA (4-axis robot) Payload: nominal 5 kg, maximum 10 kg Horizontal reach: 850 mm Vertical reach: Axis 3: 420 mm Rotational range: J4: +/- 360° Horizontal repeatability: +/- 0.025 mm Vertical repeatability: J3: +/- 0.01 mm Rotational repeatability: J4: +/- 0.005° Maximum work envelope: Axis 1: +/- 152°, Axis 2: +/- 152.5°, Axis 3: 420 mm, Axis 4: +/- 360° Maximum operating speed: J1,J2: +/- 11,000 mm/s, J3: +/- 2,350 mm/s, J4: +/- 2,400°/s Permissible inertia: nominal 0.02 kg*m², maximum 0.25 kg*m² Crodpfx Asibx S Noh Uei User cabling, electrical: 1x D-Sub 9 pin, 1x D-Sub 15 pin Z-axis: Outer diameter: 25 mm Press-in force: 250 N Weight: 48 kg Control: EPSON RC180 Mounting type: Ceiling IP protection class: IP20 Power and signal cables: 3 m Additional assembly modules in other sizes – new and used – can be found in our shop! International shipping costs on request.

Condition: new, Year of construction: 2025, functionality: fully functional, DIRECTLY FROM THE MANUFACTURER – no intermediaries SINGLE-WING ROTARY TABLE with pneumatic drive, 7.5 m long We proudly present our assembly table for prefabrication – a single-wing butterfly table – model ER-01P/750, 7.5 meters in length, specially designed for efficient and precise prefabrication of walls, ceilings, and roofs. CARPENTRY TABLE / JOINER’S TABLE / ASSEMBLY TABLE FOR PREFABRICATION Codpfx Asl D Nkzoh Uori * Pneumatic drive – working pressure 7–9 BAR * Permissible load: 50 kg/m² (e.g., for a 7.5 m table – 1125 kg) * Powder-coated steel construction * 15 mm plywood board * Holes for mounting clamping actuators every 150 mm * Removable locking pins with height adjustment * Modular construction with the possibility of adding additional segments * Option to add transport rollers AVAILABLE IMMEDIATELY – we ship to every country in EUROPE

Condition: good (used), Type of pallet: Euro pallet max height of pallet 1450 mm (incl. pallet) Electrical: 380 VAC, 3 PH, 50 Hz, 5.5 kW Dimensions (L x W x H): appr. 7500 x 1200 x 400 mm Weight: ~1000 kg Credpjtrxrbofx Ah Uoi Configuration: straight pallet conveying Modules: Position for two stacks of empty pallets - separation of pallets - palletizing position - pick-up position for full pallets

Condition: used, Article: clamping collets Manufacturer: Different Csdpfxen H Nzbo Ah Usri For multi spindle automatic lathes, used and new Please, contact us for getting more information and pictures on mail(at) or *

Condition: good (used), Year of construction: 2014, drilling capacity: 60 mm, spindle mount: MK 5, Manufacturer: WEILER MAS Type: VOM 50 Year of manufacture: 2014 Specifications Metric US Standard Arm length 1250 mm Max. drill Ø (iron) 50 mm Max. Tap diameter 48 M Quill stroke 350 mm Max. distance spindle - table 1555 mm Min. distance spindle - table 305 mm Speed 800 rpm Tool holder 5 ISO/Bt/Mk Column diameter 400 mm Dimensions (estimated) Length 3200 mm Width 1325 mm Height Credewpkr Njpfx Ah Uei 2970 mm Weight 6750 kg Please note: The information on this page has been provided by us to the best of our knowledge and, as far as possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, no representation or contract conditions will be provided. We recommend that you verify all important details.

Condition: used, Article: feed finger Manufacturer: Different Conventional feed finger and collets of RS-system For multi spindle automatic lathes, used and new Cedpfsn H Nzqex Ah Uori Please, contact us for getting more information and pictures on mail(at) or *

Condition: used, Article: Trays Basic dimensions: length 425mm x width 274mm 2 different versions: blue, yellow Crodpfx Aswzvmpjh Usi There are several used trays for sale Please, contact us for getting more information and pictures on mail(at) or *

Condition: used, Article: clamping tube Manufacturer: Schütte For multi spindle automatic lathes of different sizes Please, contact us for getting more information and pictures on mail(at) or Crsdovvhl Iopfx Ah Uei *

Condition: used, Article: clamping head Manufacturer: Different Crodpon H Nzuefx Ah Uoi For multi spindle automatic lathes, used and new Please, contact us for getting more information and pictures on mail(at) or *

Condition: used, Fette thread rolling unit T42, cross Please, contact us for getting more informations and pictures on or * Cedpfxjft Tk He Ah Ujri

Condition: used, Worm wheels and worm shafts for Schutte multi spindle automatic lathe, used Different sizes available Crjdpfxovt Twws Ah Uei Please, contact us for getting more information and pictures on mail(at) or *

Condition: used, Article: cam Manufacturer: Schütte For Schütte multi spindle automatic lathes F- and G-Type of different sizes Please, contact us for getting more information and pictures on mail(at) or Crjdsn H Nzfspfx Ah Uei *

Condition: used, Article: pick-off collets Manufacturer: Different For multi spindle automatic lathes, used and new Please, contact us for getting more information and pictures on mail(at) or Cedpon H Nzijfx Ah Usri *

Condition: used, Article: gears Manufacturer: Schütte Csdpfxen H Nzms Ah Ueri For Schütte multi spindle automatic lathes F- and G-Type of different sizes Please, contact us for getting more information and pictures on mail(at) or *