Used Plasmastar Ha 60 for sale (32,968)

Condition: used, Plasma cutting unit, plasma cutting machine MESSER GRIESHEIM Type Plasmastar HA 95 Serial No. 4040323 Year of manufacture: 1990 Power: 95 Amp. - 60% duty cycle 45 Amp. - 70% duty cycle Adjustment range: 2 steps Cutting capacity: 25 mm (clean cut) Severance cut up to 45 mm Hand torch: PHC 95/140 Power supply: 380 Volt, 50 Hz, 32 Amp. plug - Water-cooled - New hand torch BINZEL ABICOR, Type Abiplas Cut 200 W - 6 meter hose package length - Operating manual Space requirements (L x W x H): 900 x 480 x 850 mm Dwjdpfx Aboyah R No Nec Weight: 160 kg Very good condition

Condition: used, Year of construction: 2011, For sale: a vertical machining center Manufacturer: AGIE MIKRON / GF AgieCharmilles Type: HPM 600 HD Year of manufacture: 2011 Control system: HEIDENHAIN iTNC 530 Technical data / equipment: Travel distances X/Y/Z: 600 / 600 / 500 mm Spindle speed: up to 20,000 rpm Tool holder: HSK-A 63 Tool changer: 60 positions Max. tool diameter: 80 mm Max. tool length: 300 mm Max. tool weight: 6.5 kg Max. workpiece weight: 500 kg Feed rate X/Y/Z: 40 / 40 / 30 m/min Table adjustable in degrees Chip conveyor Coolant system Dimensions: approx. 3,500 x 2,350 x 3,050 mm Weight: approx. 9,500 kg According to the operator, the machine is in very good used condition. Inspection possible by appointment. ____ Djdpfx Ajzk Erkjb Njwc Subject to prior sale and errors in the technical specifications. The technical data has been compiled to the best of our knowledge, but does not constitute guaranteed characteristics. Our general terms and conditions apply; in addition, the seller is not liable for typing or data transmission errors. The appearance of the offered items corresponds to their age and the images shown. The technology and wear of the offered items are in accordance with their age. Used machines are sold exclusively to commercial enterprises and without warranty.

Condition: good (used), Year of construction: 2019, Industrial robot Manufacturer: Kuka Type: KR60 HA Year of manufacture: 2018/2019 Few operating hours Reach: 2033 mm Weight: 665 kg Payload: 60 kg Kuka KRC4 controller Weight: 150 kg Software version: V8.3.40 Kuka touch panel Kuka connecting cables 51026ä Dsdpfen Utbgex Ab Nowc

Condition: good (used), Year of construction: 2005, machine/vehicle number: 7053055966, functionality: fully functional, power: 15 kW (20.39 HP), input voltage: 400 V, input current: 30 A, pressing force: 160 t, stroke length: 175 mm, table length: 4,050 mm, oil tank capacity: 150 l, total length: 5,000 mm, total width: 2,170 mm, total height: 2,800 mm, overall weight: 11,620 kg, Equipment: CE marking, documentation/manual, safety light barrier, The press brake would be available starting in October/November. Dsdpjzc H Apsfx Ab Nswc Please feel free to contact us if you require any further information.

Year of construction: 2004, condition: good (used), machine/vehicle number: 041115166, Offer 26312 Technical data: - Maximum swing over bed: 550 mm - Maximum swing over cross slide: 310 mm - Turning length: approx. 1500 mm - Travel distances: - Z-axis: 1600 mm - X-axis: 300 mm - Spindle mounting according to DIN - Spindle bore: 82 mm - Taper of tailstock spindle: MK 5 - Travel of tailstock spindle: 150 mm - Spindle speeds: 80 - 3500 rpm Dwodpozvna Usfx Ab Njc - Rapid traverse rates X / Y - Drive power: 17 kW - Including: - CNC control: FAGOR - Hydraulic chuck - Electric handwheels - 8-position tool turret - Manual tailstock - Coolant system - Footprint: approx. W 4400 x H 2100 x D 2300 mm - Weight: approx. 4400 kg

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, cutting height (max.): 260 mm, cutting width (max.): 260 mm, cutting range round steel at 45°: 260 mm, cutting speed: 100 mm/min, saw band length: 1,900 mm, Manufacturer: Jaespa Model: W260 HA Year of manufacture: 2018 Technical data: ----- - Bandsaw blade: 3,660 x 27 x 0.9 mm - Drive power: 1.5 kW Dwedpfjxvd Tqox Ab Noc - Cutting speed: 15 - 100 mm/min - Max. cutting capacity (round): 260 mm - Max. cutting capacity (square): 260 x 260 mm - Infinitely variable angle adjustment +/- 45° - Hydraulic material clamping - Hydraulic feed with automatic shut-off - Automatic bow lifting after cutting - Coolant pump - Frequency-controlled band drive - Weight: 420 kg - Dimensions LxWxH in mm: 1,900 x 750 x 1,220 Accessories: ----- - Roller conveyor 1,500 mm

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Nice Microcut Challenger lathe turning over bed 550 mm in gap 770 mm over slide 320 mm Dsdpfx Absy D Tals Nswc Center length 1500 mm Control Siemens 810D Chip conveyor Coolant equipment Multifix toolpost with 10 holders Fixed steady Travelling steady 3 jaw chuck manual All manuals present

Condition: refurbished (used), Year of construction: 1975, DISKUS GRINDING MACHINE (Double-surface grinding machine) DISKUS WERKE AG (FRANKFURT / MAIN), Type DDS 600 P, Year of manufacture 1975, COMPLETELY OVERHAULED in 2024. Dodpfx Ajzzpaaeb Nowc

Condition: excellent (used), Year of construction: 2007, 1 used, very well-maintained high-performance cycle lathe with FAGOR 8055 TC-A, 8-position tool turret BARUFFALDI VDI 40, pneumatic 3-jaw front chuck SCHUNK ROTA TP 315-105, constant cutting speed, 1 large steady rest, and articulated chip conveyor. Manufacturer: MICROTURN, Origin Taiwan Model: Challenger BNC 26160X Year of manufacture: 2007 Technical data: Center height 350 mm Center distance 4000 mm Swinging diameter over bed 690 mm Swinging diameter over cross slide approx. 420 mm Swinging diameter in the gap 870 mm Spindle speeds 0 – 2400 rpm Spindle bore 82 mm Spindle motor 15 / 22 kW Machine dimensions + chip conveyor L x W x H 7350 x 2450 x 2050 mm Machine weight 6,800 kg Accessories / Special features: • Cycle control FAGOR CNC 8055 TC-A with alphanumeric keyboard o LCD color monitor Dodpfx Abszfqdns Njwc o Graphical simulation of the cycles o 2 electronic handwheels • Pneumatic 3-jaw front chuck SCHUNK ROTA TP 315-105, Ø 315 mm • 8-position tool turret BARUFFALDI TB 160-8/12, VDI 40 • Articulated chip conveyor • 1 fixed steady rest with rollers, internal diameter approx. 380 mm • Automatic lubrication of the headstock • Automatic lubrication of the longitudinal and cross slides • Tailstock with hydraulically actuated quill • Coolant system • CE compliant New FAGOR servo controller for main spindle control, repair costs €4,950.00 net Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: reconditioned (used), Year of construction: 2018, overall weight: 30,000 kg, Doppstadt DW 3060K Biopower Type F M Shaft - Year of manufacture: 2018 - Engine: MTU R61300 with 490 hp - AD BLUE - Weight: 30,000 kg Dwodezx Rz Tepfx Ab Nec - Remote control - Humidification system - Rear conveyor belt 7m - Over-band magnet - Track chassis - Central lubrication system - Limiter - Roller: M 3000mm x 800mm - Teeth: 124 The machine is in its original condition, not repainted, only workshop-reconditioned.

Condition: used, Year of construction: 2023, HXCP HX360 Hardcover Casing-In Machine (2023 Model) Note this machine new is over $70,000 USD. Asking for $39,000 or best offer for quick sale. Buyer responsible of removal and shipping. Link to YouTube video is included in the listing. Available for sale is a 2023 HXCP HX360 automatic hardcover notebook/book casing-in machine. The machine was purchased new in 2023 and has been used in our hardcover book production operation. It is designed for automatic casing-in of hardcover books, journals, notebooks, and similar products. We are selling this machine because our production requirements have grown and we are upgrading to a larger, higher-capacity binding line that better fits our current workflow. The machine is currently located in New Jersey * HXCP HX360 * Year: 2023 Dsdpszbykqsfx Ab Nswc * Automatic hardcover casing-in machine * Suitable for hardcover books, notebooks, and The machine is being sold as-is, where-is, with Please contact us for additional photos, videos, specifications, and pricing.

Year of construction: 1996, condition: ready for operation (used), A Bosch candy forming machine is offered. Max. rope speed: approx. 125m/min, min./max. output: approx. 1000/4000candies/min, hourly output range: approx. 400kg/h-1200kg/h, rope diameter range: approx. 15mm/49mm, max. filling percentage: approx. 32%, control system: Siemens SIMATIC S5-95U. Weight: approx. 2400kg. Machine dimensions X/Y/Z: approx. 3900mm/1650mm/1750mm. Documentation available. An on-site inspection is possible. Dsdpfxezpyytj Ab Nowc

Condition: used, Year of construction: 2007, turning length 1500 mm control FAGOR 8055i/A TC centre height 230 mm greates pass round over bed 475 mm swing diameter over slide rest 240 mm bed width 355 mm max. workpiece weight 1500 kg Djdpfxev Hhv Us Ab Njwc spindle bore 65 mm spindle turning speed range 100-4500 U/min weight of the machine ca. 3,15 t required space 3,51 x 1,80 x 2,02 m

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Durma CNC pressbrake Model CNC HAP 30160 Year : 2005 Capacity : 3050 mm. x 160 ton Control : Cybelec 3 axis (Y1 - Y2 - X) Dwjdpfx Abjzuvxpe Noc Last service and security control : July 2026 Equipment.... -Lots of bending tools -Crowning -Front arms sideway adjustable -Foot pedal

Condition: good (used), Year of construction: 2008, Center height: 445 mm Center distance: 4000 mm Swing diameter over bed: 890 mm Swing diameter over cross slide: 550 mm Swing diameter in gap: 1150 mm Spindle speeds: 0 – 1480 rpm Spindle bore: 106 mm Spindle motor: 22 / 33 kW continuous rating / S 6 (40%) Machine weight approx. 12,500 kg Dwsdpjyy Nlpofx Ab Njc Accessories / Special features: • Cycle control FAGOR CNC 8055i TC with alphanumeric keyboard o 10.4" LCD color monitor o Graphic simulation of cycles o Electronic handwheel for manual machine operation • 3-jaw chuck • 8-station tool turret • 2 fixed steady rests with rollers • Movable control panel • Automatic lubrication of headstock • Automatic lubrication of longitudinal and cross slides • Tailstock with hydraulically operated quill • Coolant system • CE conformity Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, Year of construction: 2004, operating hours: 28,082 h, travel distance X-axis: 800 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 520 mm, controller model: Siemens 840 D, spindle speed (max.): 13,000 rpm, The control unit (PCU 50) was replaced in March 2024! The machine spindle was replaced at approximately 5,500 operating hours! Tools are included in the offer! Dwodpfx Ajzvl Tfeb Noc TECHNICAL DETAILS Travel range X-axis: 800 mm Travel range Y-axis: 620 mm Travel range Z-axis: 520 mm Spindle speed: 13,000 rpm Number of tool positions in the tool magazine: 30 MACHINE DETAILS Control unit: Siemens 840 D Operating hours Control unit operating hours: 60,150 h Machine operating hours: 56,860 h Spindle operating hours: 28,082 h Spindle replacement at: 5,500 h EQUIPMENT Tools 4th axis Hofmann RW/NC160 Oil mist extraction system Strip filter system with internal cooling 20 bar with double switching filter Documentation Hedelius + Siemens Sinumerik Infrared probe Renishaw Note: The sale does not include the milling attachments on the rear panel of the machine. Since the machine has been demonstrated several times, the machine operating hours may vary slightly.

Condition: used, functionality: fully functional, overall weight: 2,800 kg, total length: 2,750 mm, total width: 1,500 mm, total height: 1,800 mm, input voltage: 400 V, rotor diameter: 730 mm, rotor width: 600 mm, Hammer mill with swing hammers for secondary size reduction of cable scrap, aluminium, e-scrap and non-ferrous metals. Technical data: – Rotor: hammer circle diameter approx. 730 mm, width 600 mm, rotor discs Ø 520 mm – Hammers: plate type 215 × 100 × 13 mm, bore 35 mm – Screen: replaceable perforated screen, one fitted – Drive: V-belt, ABB motor frame 225 (approx. 37–45 kW), 400 V / 50 Hz – Electrics completely renewed, new control cabinet included – Hinged upper housing – Dimensions approx. 2,750 × 1,500 × 1,800 mm incl. motor and hopper, weight approx. 2,800 kg Dwedoz I I Hvjpfx Ab Noc Scope of delivery: mill with motor, belt guard and control cabinet; new complete wear part set (hammers, pins, spacer rings, unused); discharge belt conveyor with gear motor. Nameplate missing, manufacturer unknown. The machine runs without problems. Inspection and test run by appointment on site (Cheb, Czech Republic). Loading onto truck on site. Sold as is, price net plus VAT.

Condition: ready for operation (used), Year of construction: 2009, A wood dust extraction and filtration system Krämer for saw lines is available. 1) Wood dust extraction unit Krämer VKA-P 100/650/55, air volume flow: 27000m³/h, pressure increase: 3800Pa, motor power: 55kW, V-belt length: 3550mm. 2) Filtration unit Krämer GFS Shake 160/25/250, filtration capacity: 30000m³/h, filter material: polyester needle felt, material discharge: TFS40/10/1.1. 3) Fan Krämer VFM-R 45/250/3, air volume flow: 3000m³/h, pressure increase: 2500Pa, motor power: 3kW. 4) Fan Krämer VFM-P 42/200/4, air volume flow: 2500m³/h, pressure increase: 3000Pa, motor power: 4kW. 5) Separator tank/filter hopper Krämer. 6/7) 2x axial fans. Including pipes and peripheral equipment. The motor flange on the discharge motor is defective. Documentation available. An on-site inspection is possible. Dwedpfxexl Elge Ab Noc

Condition: ready for operation (used), Year of construction: 2003, pressure 160 t Djdozrzt Hjpfx Ab Newc chamfer lenght 4100 mm distance between columns 3100 mm dayligth 370 mm stroke of upper beam 200 mm throat 500 mm ajustment speed 100 mm/sec working feed 9.0 mm/sec return speed 86.0 mm/sec work height max. ca. 900 mm back stop - adjustable max. 500 mm Control CYBELEC oil volume 150 l total power requirement 15.0 kW weight 12000 kg range L-W-H 5100 x 2100 x 2750 mm Original price ~ 85.000 Euro From a maintenance workshop Well-maintained condition (!!) Includes optional equipment - in checked conditions - machinevideo - ?v=pleltYCkXDQ Equipment: - Electro-hydraulic CNC press brake - With DELEM CNC control unit * Swiveling control panel (front right) * Tool & program library * Simple CNC programming - CNC-controlled axes: Y1 + Y2 + X + R + CNC crowning - CNC motorized backgauge (X-axis) * With 4x manually adjustable stop fingers (Z-axis) - CNC motorized height adjustment (R-axis) - WILA CNC bed crowning system - WILA electro-hydraulic upper tool clamping * Incl. sectionalized set of 28° acute-angle punches * Incl. WILA hydraulic power unit - WILA manual lower tool clamping * Incl. die adapter rail (width 77 mm) * Incl. WILA tool holder (width 13 mm) - 2x sliding front support arms - Side safety guards (swiveling doors) - Rear safety guard (swiveling door) - 1x movable foot pedal - Operating manual

Condition: ready for operation (used), Year of construction: 1989, Semi-automatic broach sharpening machine 3M601Ф1 Manufacturer: Vitebsk Tool Grinding Machines Specifications: Max. external diameter of round broaches: 250 mm Max. workpiece length (between centers): 2000 mm Application: Round, spline, flat, face, and keyway broaches. Dsdpfx Abozx Timo Nowc

Condition: refurbished (used), functionality: fully functional, 1. Machine specifications: * Travel ranges - Table longitudinal travel (x) 1190 mm - Cross slide transverse travel (y) 530 mm - Column vertical travel (z) 540 mm * Table surface area 480 x 1600 mm * T-slots 18 mm at 80 mm spacing 5 * Table load capacity 1500 kg * Tool holder SK 50 DIN 2080 * Diameter in the front bearing 100 mm * Milling spindle drive power 15 kW * Speed range 35.5 ... 1800 min-1 * Number of speeds 18 * Step ratio, automatic shifting 1.25 * Max. torque 2200 Nm * Feeds 3 ... 2000 mm/min * Rapid traverse longitudinal and transverse 10000 mm/min vertical 5000 mm/min * Coolant system 40 l/min * CNC control TNC 360 Heidenhain, feed motors SIEMENS Dodpfxjz H Ttxe Ab Nowc * Connected load 35 kW * Machine weight 5400 kg 2. Technical condition The machine was only used in production until May 2009!!! Due to the overhaul, the machine meets the acceptance conditions for new machines. All guideways have been re-scraped. Ball screw drive and measuring systems in all axes have been replaced. All motors have been checked and repaired in the authorized workshop. The milling spindle has been checked and repainted. A milling head can be provided for vertical machining. 3. Warranty: last inspection 04/2026 3 months 4. Prices * Machine 59,000.00 € * Assembly/Commissioning 5,250.00 € 5. Delivery conditions: * Pricing: Prices are quoted net for delivery or service ex works, excluding value-added tax. We reserve the right to sell the machine in the meantime. Our terms and conditions of delivery and service apply. * Payment terms: 30% down payment upon order 60% upon delivery 10% after handover * Delivery date: ex warehouse

Year of construction: 2000, condition: excellent (used), Used high pressure homogenizer NS5160HA made by GEA Niro Soavi with an operating pressure of 700 bar and a throughput of 7.000 l/h. Sanitary version with five ceramic pistons, an operating temperature of 40°C and a maximum viscosity of 12.000 cP. Powered by an electric motor with 160 kW which needs three-phase current at 380 V and 50 Hz. The homogenizer was regularily checked and maintained and is fully functional. Dsdshzcxrjpfx Ab Nswc

Condition: excellent (used), Year of construction: 1998, turning diameter over cross slide: 270 mm, turning length: 1,500 mm, turning diameter: 460 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 20 rpm, Model: Alpha 460 Plus Year: 1998 Control: Fanuc GE Swing Over Bed: 460mm (18 ½ ”) Distance between Centres: 1500mm (60”) Swing Over Top Slide: 270mm (10.8”) Spindle Speeds: 20 – 2000 RPM Machine With: 3 – Jaw Chuck 4 – jaw Chuck Fixed Steady Quick change Toolpost Dwsdpfx Aey N Ulmob Nec Coolant Pump and Fittings

Condition: good (used), Year of construction: 2017, Industrial robot Manufacturer: Kuka Type: KR60L30HA Year of manufacture: 2017/2018 Reach: 2429 mm Dedpjrrxr Sofx Ab Nowc Weight: 665 kg Payload: 30 kg Kuka KRC4 controller Weight: 150 kg Software version: V8.5.4 Kuka touchscreen Kuka connection cables 51026ä

Year of construction: 2023, operating hours: 1 h, condition: new, functionality: fully functional, machine/vehicle number: N.A., Unused CIC 600 Inverting Filter Centrifuge made of Hastelloy C22 DIN 2.4602. The centrifuge was delivered and installed in 2023, however, this unit along with much of the associated equipment was never put into operation. The centrifuge has a drum diameter of 600 mm, a nominal capacity of 52 liters or 65 kg, maximum drum speed 1940 rpm, maximum centrifugal acceleration 1260 (g), housing material 1.4571, product-wetted parts made of 2.4602—identical to Heinkel centrifuges. Scope of supply: a) CIC 600 Inverting Filter Centrifuge b) Support frame c) CIP system integrated into the main system d) Quick-release front housing, tool kit included e) Inertization pressure monitoring integrated into the main system f) Solids discharge valve g) Flooding function Dwjdpfx Aeyffr Usb Njc h) Wash tray including coating Detailed technical information is available upon request. Please contact us for a written offer. Dismantling, packaging, and loading onto a truck will be organized and supervised by Cycron GmbH, ensuring a highly professional process. For further questions or to get in touch, feel free to contact us anytime. We look forward to hearing from you. Cycron GmbH, Switzerland