Used Plasma Cutting System for sale (46,864)

Condition: new, Year of construction: 2024, Everything is configurable on demand, very short production & delivery time. We will be happy to provide you with further information on request. Technical data on request. Standard equipment: welded steel construction DURMA CNC control unit (AURORA) Remote control diagnostics (Ethernet) Lantek Software W / Automatic Nesting Position determination of the sheet metal to be cut by laser DURMA Burner height control Double-sided drive system (rack and pinion) AC servo motors for X and Y axis movement CNC control outputs/inputs for the filter unit Consumables Starter-Kit Kjdpfx Anefiqgrsyolu Plasma torch * Ignition console * Burner height regulation with Ball screws on double Linear bearings * Special equipment: Hypertherm Max Pro 200 + hose package + nozzles + Durma THC + torch Hypertherm HPR 130 XD + hose package+ nozzles + Durma THC + ignition console + burner Hypertherm HPR 260 XD + hose package+ nozzles + Durma THC + ignition console + burner Hypertherm + Hypertherm HPR 400 XD + hose package + nozzles + Durma THC + ignition console + burner CE Standard Safety wire Automatic gas console for Hypertherm, Manual gas console for Hypertherm, Autogenous cutting torches Plasma torch protection system manual plasma angle cutting head, CNC angle cutting head (+/- 45). Single drilling head Multiple drilling head Filter for 130A, 260A or 400A Pipe cutting unit Ø50 mm - Ø400 mm Additional support for the pipe cutting unit Warning lamp for error and program end With over 60 years of experience

Condition: new, Year of construction: 2024, Everything is configurable on demand, very short production & delivery time. We will be happy to provide you with further information on request. Technical data on request. Standard equipment: welded steel construction DURMA CNC control unit (AURORA) Remote control diagnostics (Ethernet) Lantek Software W / Automatic Nesting Position determination of the sheet metal to be cut by laser DURMA Burner height control Double-sided drive system (rack and pinion) AC servo motors for X and Y axis movement CNC control outputs/inputs for the filter unit Consumables Starter-Kit Plasma torch * Kledpfjfirx Tjx Anyou Ignition console * Burner height regulation with Ball screws on double Linear bearings * Special equipment: Hypertherm Max Pro 200 + hose package + nozzles + Durma THC + torch Hypertherm HPR 130 XD + hose package+ nozzles + Durma THC + ignition console + burner Hypertherm HPR 260 XD + hose package+ nozzles + Durma THC + ignition console + burner Hypertherm + Hypertherm HPR 400 XD + hose package + nozzles + Durma THC + ignition console + burner CE Standard Safety wire Automatic gas console for Hypertherm, Manual gas console for Hypertherm, Autogenous cutting torches Plasma torch protection system manual plasma angle cutting head, CNC angle cutting head (+/- 45). Single drilling head Multiple drilling head Filter for 130A, 260A or 400A Pipe cutting unit Ø50 mm - Ø400 mm Additional support for the pipe cutting unit Warning lamp for error and program end D9hnyc97o With over 60 Yes

Year of construction: 2024, condition: new, Machine dimensions: - (L x W x H) 5,240 mm x 3,600 mm x 2,400 mm, - Width with console: 7,700 mm. - Length with filter: 11,000 mm Technical details: - Max. sheet size: 4.000 x 2.000 mm - cutting speed: 12 m/min. - positioning accuracy: ± 0,1 mm - Repeat accuracy: ± 0.1 mm - Power (Hypertherm XPR 170 XD Optimix): 170 A - Cutting area: - Unalloyed steel, piercing, argon: 40 mm - Unalloyed steel, piercing, air: 35 mm - Unalloyed steel, separation cut: 60 mm - Alloy steel, hole piercing: 22 mm - Alloy steel, cut-off: 38 mm - aluminium, hole piercing: 25 mm - aluminium, separation cut: 38 mm Basic equipment: - Control: Durma Aurora CNC controller - Truehole Standard - Sheet metal measurement by laser - Burner height control - AC servo motors for X and Y axis - Software: Lantek, or Metalix Cad/Cam software with Autonesting - 50 pre-programmed part geometries for easy and quick modification. - consumption kit (burner nozzles, etc.) Kljdpfjdyfwksx Anysu - Plasma torch - ignition console - Remote - Control: Remote maintenance options are included: - Hypertherm XPR 170 XD + Optimix + automatic gas control - Filter for HPR 170 XD - Safety system with circumferential safety wire - Oxyfuel torch with sensor - Plasma torch - demolition system - Air dryer

Year of construction: 2024, condition: new, Everything is configurable on demand, very short production & delivery time. We will be happy to provide you with further information on request. Technical data on request. Standard equipment: welded steel construction DURMA CNC control unit (AURORA) Remote control diagnostics (Ethernet) Lantek Software W / Automatic Nesting Position determination of the sheet metal to be cut by laser DURMA Burner height control Double-sided drive system (rack and pinion) AC servo motors for X and Y axis movement CNC control outputs/inputs for the filter unit Consumables Starter-Kit Plasma torch * Ignition console * Burner height regulation with Ball screws on double Linear bearings * Special equipment: Hypertherm Max Pro 200 + hose package + nozzles + Durma THC + torch Hypertherm HPR 130 XD + hose package+ nozzles + Durma THC + ignition console + burner Hypertherm HPR 260 XD + hose package+ nozzles + Durma THC + ignition console + burner Hypertherm + Hypertherm HPR 400 XD + hose package + nozzles + Durma THC + ignition console + burner CE Standard Safety wire Automatic gas console for Hypertherm, Kedpefirx Nefx Anyslu Manual gas console for Hypertherm, Autogenous cutting torches Plasma torch protection system manual plasma angle cutting head, CNC angle cutting head (+/- 45). Single drilling head Multiple drilling head Filter for 130A, 260A or 400A Pipe cutting unit Ø50 mm - Ø400 mm Additional support for the pipe cutting unit Warning lamp for error and program end With over 60 years of experience

Condition: like new (used), Year of construction: 2025, operating hours: 32 h, functionality: fully functional, type of input current: three-phase, working range: 4,000 mm, sheet thickness steel (max.): 50 mm, overall weight: 3,000 kg, total width: 2,700 mm, total length: 5,000 mm, workpiece weight (max.): 5,000 kg, Equipment: documentation/manual, Demonstration machine with large spare wear parts package for sale. Cutting table 4x2m and 300A XPR High Definition water-cooled Hypertherm power source. Core Plus mixed-gas console. True Hole function bolt guarantee —> Hole diameter equals material thickness (e.g. 20mm hole in 20mm plate). Top cutting results thanks to HD cutting technology. Very reliable and extremely user-friendly machine. Remote access and operation via office PC or smartphone possible, CAM software on board. - only 26 cutting hours - Includes approx. €3,000 (net) worth of wear parts - Includes 3 quick-change heads, HD water-cooled, price per piece approx. €1,500 (net) - Piercing up to 50mm with Argon Assist - Cuts up to 80mm in mild steel - Includes comprehensive training at our premises - Dismantling and loading included - 4-year manufacturer’s warranty - New price: €135,000 (net) Kljdpfx Anoygczpsyou Freight and installation available as separate offer.

Condition: good (used), Year of construction: 2010, Offer 25375 Technical Data: - Working area / cutting length with approx. 5 m rails: approx. 3000 mm - Working area / cutting width: approx. 1500 mm - Controller: BACH - Track gauge: approx. 1900 mm Klodpexnivzofx Anyju - 1 plasma torch with height adjustment - Plasma source: KJELLBERG Hi FOCUS 160 i - Cutting current at 100% duty cycle: 10 - 160 A - Cutting range (steel): approx. 5 - 50 mm - Cutting range (aluminium): approx. 5 - 35 mm - Cutting range (stainless steel): approx. 5 - 30 mm - Connection: 400 V / 35 kVA - Extraction table with extraction unit, make: TEKA, type: Filtercube 4 H, year 2010 - Weight: approx. 4 t - Space requirement for system: approx. L 7.5 x H 1.5 x D 2.4 m - Space requirement for extraction unit: approx. L 1.5 x H 3.5 x D 1.5 m

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 1177, sheet thickness steel (max.): 80 mm, track width: 4,000 mm, cutting length (max.): 6,000 mm, cutting width (max.): 3,000 mm, stroke length: 215 mm, Comprehensively equipped plasma cutting system with Kjellberg Smart Focus & Kemper filter - last overhauled in 2024! TECHNICAL DETAILS Working Area Track width: 4,000 mm Working area: 3,000 mm Working width: 3,000 mm Working length: 6,000 mm Table length: 6,600 mm Table width: 3,200 mm Maximum cutting length: 6,000 mm Maximum cutting width: 3,000 mm Stroke & Speed Stroke: 215 mm Speed: 70 mm/s Feed speed: 12,000 - 20,000 mm/min Material Thicknesses Steel sheet thickness: max. 80 mm Aluminum sheet thickness: max. 80 mm Height adjustment type: electric Cutting head: PerCut4000 quick-change head Automatic gas control: Kjellberg PGV-300 Energy chain: 8 m Klodpfjwzhdyox Anyju Filter System KEMPER PlasmaFil Compact Type: 31 0650 Extraction capacity: 4,500–6,500 m³/h Negative pressure: 1,900–2,500 Pa Filter area: 100 m² Motor power: 7.5 kW Voltage: 3 × 400 V 50 Hz Dimensions: 1,830 × 1,830 × 3,800 mm MACHINE DETAILS Dimensions Total width: 4,960 mm Total length: 8,400 mm EQUIPMENT Documentation/manual Laser pointer for sheet alignment 8 m heavy machine runway with HEB300 High-precision linear guide with servo motor For disassembly, the existing crane system in the hall can be used.

Year of construction: 2020, condition: new, The Sapphire is the optimum solution for heavy industry for material thicknesses up to 200 mm. It enjoys great popularity with various production companies - often in three-shift operations - and all areas of application where stability, efficiency and process reliability are particularly important. Thanks to the high-quality equipment, the system is a universal tool for the highest demands and a helpful instrument for process optimization. Used in more than 400 industrial plants worldwide, the Sapphire cutting system proves itself every day. Equipment - Harris oxy-fuel burner - Kjellberg plasma torch with e-touch - Kjellberg Q 3000 plasma power source with automatic gas console - Crosshair laser pointer for easier positioning - CamConcept Finest Cut V 7 - Suction table 3000 x 6000 mm - Suction unit PFC 6 incl. suction pipes - Delivery, installation and commissioning Main features - High dynamics and precision in automated 2D & 3D cutting of sheets, tubes and profiles - Sheet metal processing up to a material thickness of 200mm - Extensive cutting database for ideal user-friendliness - Designed for highest demands under the most difficult conditions in three-shift operation General technical data Drive: Servo AC Available working widths: 2.000-7.000 mm Kjdpfx Aof Ak N Renyslu Available working lengths: from 1.500 mm positioning speed: 25,000 mm/min cutting thickness: up to 200 mm Cutting quality: DIN-EN ISO 9013 Positioning accuracy

Condition: new, Opal WaterJet Combo is the only machine in the world that combines the advantages of ultra-fast plasma cutting technology and the accuracy of waterjet cutting. The synergy of the possibilities offered by both technologies allows you to take full advantage of all the benefits. Thanks to its universal application and extensive equipment options, the Opal WaterJet Combo has proven itself in both large factories and small operations. Main features - Innovative, patented use of water jet and plasma technologies - Enables fully automatic cutting with both cutting methods - Up to 10 times the cutting speed of conventional water jet systems - Reduction of production costs of up to 70%. - Universal tool for cutting all types of material - Possibility of using the ProX 3D cutting head - Flexible use of the preferred cutting technologies during cutting for the respective component - Optional cutting with pure water or abrasive General technical data Drives: Servo AC Kodpfx Ajf Ak Ugjnyolu Available working widths: 1.000 - 6.000 mm Available working lengths: 1.000 - 12.000 mm Material thickness - Water jet 2D: 0.5 - 250 mm - Water jet 3D: 0.5 - 150 mm - Plasma: depending on plasma source Quality plasma sheaths: DIN-EN ISO 9013 positioning speed: 20,000 mm/min Positioning accuracy: DIN-EN 28206 Security module: DIN-EN 13850 El

Condition: new, Due to its dynamics and efficiency, the Jantar is the most frequently chosen model of Eckert machines. It is used by large industrial companies and medium-sized businesses looking for both an economical and reliable solution. The Jantar plasma cutting machine can be equipped with a plasma and oxyfuel cutting system and a wide range of accessories. (marking, drilling and machining of tubes and profiles). The design of the machine has been optimized over the years for maximum reliability, as confirmed by hundreds of customers throughout Europe. Main features -attractive price of a very well equipped basic version -Highly dynamic and precise cutting of 2D applications, tubes and profiles -cutting capacity from 0,5mm to 100mm material thickness -Comprehensive database with predefined cutting parameters -Possibility to optionally extend the length of the working area Kedpfef Alb Asx Anyjlu Technical data Drive Servo AC Available working widths 1.500, 2.000, 2.500, 3.000 mm Available working length Any length from 1.500 mm positioning speed 25,000 mm/min cutting thickness up to 100 mm Cutting quality DIN-EN ISO 9013 Positioning accuracy DIN-EN 28206 Repeat accuracy DIN-EN 28206 Electrical systems DIN-EN 81346 Safety module DIN-EN 13850 Working height 740-760 mm Working - ambient temperature + 5 °C to 45 °C Working - Humidity max. 90%

Year of construction: 2014, condition: ready for operation (used), A complete CNC double gantry plasma cutting system Microstep with oxyfuel torch for nesting, bevel cutting and tube processing is available. 1) Plasma cutting system, max. processing length: 16500mm, max. processing width: 2500mm, max. processing width including shaft: 3700mm, max. material thickness VA/structural steel: 20mm/40mm, number of gantries: 2. Gantry 1: with a plasma rotator and a Kjellberg HiFocus 280i neo plasma cutting source. Gantry 2: fully automatic oxy-acetylene torch for possible equipment of a second torch carriage. Pipe cutting device: pipe diameter range: 30mm-700mm, max. pipe length: 16500mm, operating hours: approx. 15000h. 2) Filter system Donaldson Cyclopeel DFPRO 16, volume flow: 16000m³/h, filter elements: 16. Documentation available. On-site inspection is possible. Expected to be available from the end of 2025/beginning of 2026. Pictures are from commissioning in 2014. Ksdpfx Ajwmqwyenyjlu

Year of construction: 2007, condition: ready for operation (used), A Kjellberg plasma cutting system is available. Plasma source: Kjellberg HiFocus 160i, max. material thickness: 40mm, track width: approx. 3100mm, gantry dimensions X/Y: 2000mm/2000mm, runway height: 500mm, working dimensions X/Y: 2000mm/12000mm. The machine was expanded with inkjet in the year 2015. Including suction and filter. The control was renewed in the year 2021. Documentation available. An inspection on site is possible. Kodoxwn Injpfx Anyslu

Condition: ready for operation (used), A CNC gantry plasma and flame cutting machine is available. Working dimensions X/Y: 6500mm/2500mm, power source: Kjellberg, max. number of torches: 3, control: Heidenhain TNC 355. An on-site inspection is possible. Kledpox A Hhdsfx Anyou

Condition: good (used), Year of construction: 2008, Used 6000 x 2000 mm plasma cutting machine from HPM (Italy) Type: GV 60 20 Table dimensions: 6000 x 2000 mm Kedpfx Anszd Ur Tjyslu Hypertherm 130 XD with Truehole option New Hypertherm EdgeConnect CNC control + new servo motors Modesta extraction system Includes spare parts Year of manufacture: 2008 CNC control renewed in: 2018

Condition: good (used), TRUMPF TruLaser Cell 7040 3D laser cutting system with 3000 W Manufacturer: TRUMPF Model: TruLaser Cell 7040 Type: L31 Year of manufacture: 2016 Operating hours: 17,024 h Laser source: TRUMPF TruDisk 3001 Laser power: 3,000 W C-axis: NX360° B-axis: ±135° Travel range X: 4,000 mm Travel range Y: 2,000 mm Travel range Z: 750 mm Work table: movable Work table height: 750 mm Front opening: automatic sliding door Protective cabin: available Protective cabin roof: available Camera for work area monitoring: left Monitor: available Coordinate system: Standard Control system: TruTops Cell Basic Voltage: 400 V Frequency: 50 Hz Connection power: 13.5 kVA Required fuse rating: 80 A Laser cooling: Water-water Laser cooling unit: Standard Extraction system: available Dust extraction duct: Standard Dust extraction duct length: 30 m Additional cutting gas: Air Additional equipment: Ksdpfx Anezfvrksyjlu Dust collector manufacturer: Herding Filtertechnik System: MultiCoater Dosing unit: MCI 55/1 Extinguishing system for compact dust collector: Carbon dioxide Chiller manufacturer: Riedel Type: PC 161.1L4-D13W Year of manufacture: 2016 Refrigerant: R407C Filling quantity: 2.5 kg Rated voltage: 400 V Phases: 3~ Frequency: 50 Hz Rated current: 11 A Protection class: IP54 Max. operating pressure: 28.7 bar According to the operator, the service and maintenance intervals have always been observed.

Condition: excellent (used), I sell plasma cutter hypertherm powermax 800 d very good condition. /////Price listed for 1 pc ///// Ksdpfx Aoulc Ixjnyolu Plasma cutter Hypertherm Powermax 800 Plasma cutter description The Powermax800 plasma cutting system uses an inverter power supply to provide a smooth DC output voltage for superior cutting and gouging of mild steel, stainless steel, aluminum and other metals. The Powermax800's power supply provides a constant output current that varies from 20 to 50 amps, providing optimal performance for all metal thicknesses up to 1/2 inch (12 mm). At 50 amps, the Powermax800 can cut metals up to 3/4 inch (20 mm) thick and cut metals up to 1 inch (25 mm) thick.

Condition: new, Year of construction: 2022, AVAILABLE FROM STOCK : Geka plasma cutting machine GCS P-4020 table size 4000 x 2000mm incl. plasma source Hypertherm 125A incl. PRONEST HYPETHERM NESTING SOFTWARE - GEKA CNC cutting table - Hypertherm Powermax 125A Kedpfxjgypclo Anyelu - cutting capacity: steel 25mm, stainless steel 20mm, aluminium 12mm - CNC control with GproCUT 2D CAD cutting software - Nesting included. - Country of manufacture Spain incl. CE conformity. - Heavy duty base for increased support and rigidity. - CNC Tex computer control with touch screen. - Linear guides on all axes for high repeatability. - Safety cutting head to prevent damage to the cutting head. - Rack and pinion gearbox with 70kg/cm servo motors. - Fully enclosed cable drag to protect cables from damage. - Movement speed 40 meters/min. - Resolution 0.01mm. - Optional automatic lubrication on all axes. - Optional, separate suction chambers in the machine bed. - Z-axis with integrated THC (Torch Height Control) to ensure automatic cutting distance between torch and material during the entire cutting process. - Torch anti-collision system (machine stops before any collision). - Laser pointer to check X and Y axes for zero reference. - The effective cutting area for P-4020 is 4000 x 2000mm. - Portal height Z = 100 mm. - Table with compartements for aspiration

Condition: used, total length: 28,000 mm, For sale: MGM OMNICUT PGV3 CNC plasma and gas cutting machine. The machine is used, fully functional, and operational. It can be inspected and tested on-site. These CNC thermal cutting machines are manufactured by the Czech company MGM Tábor and are designed for plasma and gas cutting of metal sheets. The MGM OmniCut series is designed for professional, heavy-duty, and continuous operation, making it ideal for the production of large metal structures. Technical specifications: Manufacturer: MGM Tábor Model: OMNICUT PGV3 CNC control Plasma cutting Gas cutting Working table length: approx. 28,000 mm Working table width: approx. 3,000 mm Cutting thickness: Plasma: from 0.5 mm to 150 mm (depending on the plasma source) Gas cutting: up to 300 mm Heavy-duty portal construction Designed for continuous operation in industry Advantages: Large working area Plasma and gas cutting capability in one machine Suitable for cutting thick and large-format metal sheets CNC control ensures precise and repeatable cutting Reliable industrial construction The machine is connected and in use Can be seen in operation in production Application: Ideal for the production of metal structures, shipbuilding, energy, heavy industry, agricultural machinery, bridges, tanks, and other large metal products. If you have any further questions, we will be happy to answer them. Kledozd Td Ijpfx Anyju

Condition: new, Year of construction: 2023, functionality: fully functional, Poland Kedjx Dmavspfx Anyslu 1.5 Year of manufacture: 2023 1.6 Operating voltage: 400 V / 50 Hz 1.7 Saw chain: 10004788 (190 cm) 3333 000 0160 1.8 Guide rail: 11003322 (190 cm) 3004 000 5884 1.9 Operating manual: 50002270 (27) 2.0 Cutting data for wood: Maximum size of bundles to be crosscut: 4200 W=1200 H=1200 mm Minimum size: 2500 mm Size of bundles after crosscutting: maximum 4000 mm Minimum: 700 mm Remaining cut pieces (waste): maximum 300 mm 2026-04-29 i.A. P. Hörnchen Date of issue Creator 1. Machine card

Condition: used, Year of construction: 2010, machine/vehicle number: VG6000 3224, Equipment: documentation/manual, Koike Versagraph 6000, including cutting tables. Excluding strips. The machine was fully functional until April 2022. It has been disassembled and stored since 2022. Kjdpfezdz U Usx Anyelu Original new price: 450,000 euros.

Condition: excellent (used), Year of construction: 2016, Portal plasma cutting system KOIKE MOD. DELTATEX 4000. Useful vertical transversal cut: mm 3,000. Useful vertical longitudinal cut: mm 12,000. Length of runways: mm 14,000. Movement speed: mm/min 24,000. Gantry guide system: X - Y axes, rack and pinion. Type of trolleys installed: 1x Trolley for KOIKE 3D Link plasma support. Numerical Control: KoiKe Katana. Source: KJELLBERG HF 280i. Recommended cutting capacity plasma KJELLBERG HF 280i.: Kljdpjv Sua Rofx Anysu Cooling unit KWE 360. -Vertical plasma: 35 mm (in production) CS/SS. -Maximum vertical plasma breakthrough: 40 mm CS/SS. Visible in operation, excellent condition.

Year of construction: 2007, condition: excellent (used), machine/vehicle number: 20051619, Basic Functions: Slit, Cross cut, Crease In-feed paper size: 210(W)x210(L) to 370(W)x520(L)mm Minimum finished size: 55(W)x45(L)mm Paper weight: 120 to 400gsm *Depending on paper quality Operation: 4" Touch Screen Job memories: 263 preset jobs & 150 customized job memories. (100 MANU SET + 50 FLEX MODE) Feeding mechanism Upper belt tri-suction suction feed (Patented) Side blower Skew adjustment Side aligner Double feed detection Cut mark registration Feed tray stacking capacity: 100mm Speed 8.8 sheets / min. : SRA3 21up business card Klodohii Swepfx Anyou 11 sheets / min. : SRA3 8up post card 12.2 sheets / min. : SRA3 4up greeting card 15.4 sheets / min. : A4 2 cuts & 1 crease

Condition: good (used), MicroStep SPL-PA plasma cutting system with extraction and compressor technology Manufacturer: MicroStep Group Model: SPL-PA 4501.15+S50 Current requirement: 120 A Machine type: CNC plasma cutting system Kledpoyvd Uiofx Anyeu CNC control: iMSNC Design: Portal design with linear guides Extraction system: Donaldson Torit DCE Electrical connection for extraction system: 400 volts Motor power of extraction system: 7.5 kW Compressed air generation: Screw compressor Compressor manufacturer: Kaeser Compressor model: TA 8 CE marking: present Location: Waltenhofen, Germany Dismantling and loading by the seller included.

Condition: used, Year of construction: 2020, CNC portal plasma cutting machine with skew rotator beveling unit Manufacturer: Messer Type: Multitherm 4000 Year of manufacture: 2020 CNC control: Global Control Plus Working area: 3 x 10.8 m Track width: 4,000 mm Kledpfex Dlwmjx Anyeu 1 oxyfuel torch ALFA 1 plasma torch with skew rotator beveling unit Power source: Hypertherm XPR300 Cutting thickness: 50 mm piercing 80 mm cut Extraction table Beuting without filter system Software: Omniwin with Bevel ä3626

Condition: ready for operation (used), Year of construction: 2010, Large semi-automated Pace cutting system Polar 137 XT-Autotrim with pile lifter, jogging system with count scale, gripper transport system, rotary gripper, and delivery unit Year: 2010 Approx. 5.43 million cuts Workflow: The material to be cut is raised to an optimal working height using a loading lift, placed into the jogger by the operator, automatically jogged, and then transported via the Autotrans gripper system from behind the jogger to the rear table of the high-speed cutter and rotated. After cutting, the Transomat automatically stacks the layers onto a pallet, allowing continuous cutting operations. Polar Stack Lift LW 1200-4 Platform size: 80 x 126 mm Load capacity: 1200 kg Equipped with steplessly adjustable photoelectric sensors for automatic lifting and lowering. Jogger RAH-4 with air removal roller and unloading for rear-table feeding Working format up to 75 x 105 cm Unloading of the jogged cutting material occurs automatically to the rear into the STR stacking rack. The Autotrans gripper transport system then handles layer transport onto the rear table of the high-speed cutter. Sheet scale – Polar count scale Avery Weigh-Tronix For creating quantity-accurate cutting layers Gripper transport system POLAR Autoturn – clamp transporter for rear-table loading and rotary gripper Takes over the prepared cutting layer from the stack rack or buffer table Via air tables, which use air cushion for optimized material handling, the cut material is transported directly onto the rear table of the high-speed cutter and placed with precision. The cutting layer is held firmly by the grippers during transport, ensuring even pre-aligned layers remain precisely squared during movement. Cutting machine Polar 137 XT-AT with touch control Kodpfxjxd U Sas Anyolu And Autotrim function for automatic waste removal under the front table during cutting - Lowerable side gauge left (required for rear-table loading); also allows handling of formats with a diagonal of...