Used Training Workshop for sale (6,703)

Condition: used, 8 m Office Container / Shipping Container – with WC, Storage & Full Equipment – Available Immediately! PRICE: €7,500 negotiable, ex Dunkirk, France AT A GLANCE: Knjdpfx Akezvx Hxo Asa ✅ Office, WC & storage in one container ✅ Fully equipped: heating, sink, heavy-duty power, awning ✅ Ready for immediate delivery – only 2 units available! DETAILS & HIGHLIGHTS: We offer well-maintained 27FT office containers (8 m length) in excellent condition – perfect as office containers, site containers, or storage containers. The containers come from the French CARGLASS fleet and feature high-quality fittings. All technical components are fully functional and ready to use. The condition is guaranteed and will be documented on the invoice. Overview of equipment: ✅ Separate WC with washbasin ✅ Office area with plenty of natural light ✅ Kitchenette with sink & hot water boiler ✅ Storage room ✅ Heating & air conditioning ✅ Electric awning 3x7 m with remote control ✅ Heavy-duty power connection, electrical installation & exterior lighting ✅ Ramp & fire extinguisher Special features: ✅ Practical layout: office – WC – storage ✅ Original photos – condition as shown ✅ Ideal as a construction site office, container office or mobile service point ✅ Technically sound, ready for immediate use DELIVERY & AVAILABILITY: ✅ Delivery within a maximum of 2 weeks ✅ Delivery costs (without unloading): upon request ✅ Immediate availability: 2 units ex Dunkirk, France Contact us now to inquire & reserve! We will gladly provide additional photos, technical drawings, and details upon request. NAUTEXA GmbH

Condition: used, Used workshop containers offered from Korbach, Germany. CONTAINER TYPE: Workshop container, office container CONDITION ON DELIVERY: Used, fully functional EQUIPMENT: - Exterior lighting - Heating - Fire extinguisher - Ramp - Electric roller shutter door Knjdpfxjzvx Hrj Ak Aja - Electrical system 65 Amp. - Three-phase power connection DIMENSIONS (LxWxH): approx. 5 x 4.05 x 4.20 m Weight: 7,000 kg DELIVERY: approx. 2 weeks lead time TRANSPORT: Please provide your postcode so that we can offer you a free and non-binding quotation including delivery and, if necessary, unloading from the truck. SELECTION: In addition, we offer sea containers in all standard sizes (20DV, 40DV, 20HC, 40HC...) for any application, whether for storage, construction projects, logistics solutions, or sea transport. We look forward to your inquiry! NAUTEXA GmbH

Condition: used, Year of construction: 2025, total length: 1,450 mm, total width: 800 mm, total height: 2,200 mm, Colour: Blue Empty weight: 970 kg Price: On request Movable Press-Cylinder - Year: 2025 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Operating hours: 0 - Drive system: Conventional - Press model: Workshop press - Press configuration: Single-acting - Press force [ton]: 100 - Max. stroke [mm]: 380 - Table length [mm]: 1500 - Table width [mm]: 300 - Ram length [mm]: 100 - Throat depth [mm]: 1100 - Height adjustment [mm]: 750 - Motor power: 3.0kW - Transport dimensions: 1450mm x 800mm x 2200mm (l x w x h) - Transport weight [kg]: 970kg - Transport packages [pcs.]: 1 Kjdpfoztxnkjx Ak Aena Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Electric Tow Tractor, Tugger Train Tractor STILL E-Tugger STILL Type R06 3-wheel tow tractor, electric tow machine Serial no. W4X126A00120 Year of manufacture: 2010 Towing capacity: max. 6000 kg Payload: 150 kg Front axle load: 420 kg Rear axle load: 600 kg Knjdpov Uramefx Ak Aoa Drive power: 3.2 kW / 60 min Battery voltage: 24 volts - 3-wheel tow tractor - Without towing coupling, mounting plate with Ø 14 mm holes, hole spacing 65 / 75 x 120 mm - Lighting system - 24-volt socket at rear - Equipped with 4 used traction batteries – functional – batteries, however, in poor condition - 3-wheel solid rubber tyres 4.00-8 / (3.00) Transport dimensions L x W x H: 1700 x 1000 x 1350 mm Unladen weight: 584 kg Battery weight: 467 kg (original battery defective) Four traction batteries provisionally installed – weight approx. 180 kg Total weight: approx. 770 kg In good condition

Condition: new, pressing force: 100 t, stroke length: 400 mm, clearance between the columns: 1,010 mm, overall weight: 1,000 kg, - Capacity 100 tons - Cylinder stroke 400 mm - Working width 1010 mm Kjdpfsr Ei Szsx Ak Asna - Electrically or manually operated - pressure gauge - Emergency stop - 400V

Condition: used, Hydraulic workshop press, keyway milling press, groove milling press Hydraulic workshop press, custom-built, MaVo type 5t-20 Used for milling keyway grooves in through-holes. Knsdpfxewki Ape Ak Aoa Pressing force: 5 tons (at 100 bar hydraulic pressure) Stand width: 770 mm Cylinder stroke: 220 mm Distance from threaded piston rod to table traverse: max. 900 mm Pressing speed, ram downwards: approx. 11.5 mm/sec. = 220 mm in 19 sec. Pressing speed, ram upwards: approx. 24.5 mm/sec. = 220 mm in 9 sec. Motor power: 5.5 kW Mains connection: 400 volts, 50 Hz - 2-hand control (one button for pump on, 1 button for downwards, 1 button for upwards) - Hydraulic pump HAWE, type K5/3 (can also deliver 400 bar, but the pump is very loud) - Threaded connection on the piston rod: M42 x 1.5 mm external thread - 1 screw-in extension, approx. 290 mm for the piston rod with M42 x 1.5 mm internal thread - 1 screw-in extension, approx. 250 mm for the piston rod with M42 x 1.5 mm internal thread - 2 ram extensions for insertion into the screw-in extension, 110 and 130 mm length - 2 support plates - Very stable steel construction made of 140 series double T-beams - Estimated load-bearing capacity of the steel construction: 40 tons or more - Can be moved with a pallet truck Space requirement L x W x H: 1200 x 930 x 2280 mm Weight: 485 kg

Condition: used, mileage: 125,500 km, power: 75 kW (101.97 HP), first registration: 04/2016, fuel type: diesel, overall weight: 2,800 kg, next inspection (TÜV): 12/2026, fuel: diesel, color: white, gearing type: mechanical, emission class: euro5, number of seats: 3, total length: 4,904 mm, total width: 1,904 mm, Equipment: central locking, electric window regulation, sliding door, truck registration, Truck, 1st owner, 3 seats, Rear tailgate, Central locking with window control, Electric windows, Electric exterior mirrors, 5-speed gearbox, Tool shelves (Bott shelving system), workshop equipment, Folding vice, EURO 5 emission standard, Gross vehicle weight 2800 kg, German registration Mileage according to odometer Vehicle preferably sold to businesses or for export, Private sale possible, subject to approval Sale without warranty Net price for export Net: 8,100 EUR + (19% VAT) 1,539 EUR = Gross: 9,639 EUR Kodpfxozdqwro Ak Asna The above information is non-binding; errors/changes and prior sale are subject to change!

Condition: used, functionality: unexamined, Due to warehouse clearance, we are selling a total of 12-15 used machines/presses/workshop presses (see pictures, including those from Bosch). The machines are mounted on sturdy base frames/tables and are ideal for workshops, production, hobbyists, or for obtaining spare parts. Kedpfx Aozqtzmsk Aena Individual price: €60 per machine. Package price: If you purchase all 7 machines, you will receive an attractive package price! Condition: Used, as shown in the pictures (see photos). Upon request, transport and loading can be arranged for an additional fee, and we can organize transport throughout Europe. Prices exclude VAT. Inspection is possible by appointment. Contact us; our team will be happy to assist you. Trade-in or exchange is possible! Machine purchase and sale WE BUY/SELL PRODUCTION & METALWORKING MACHINES, AMONG OTHERS. Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For more information or to contact us, please visit our website.

Condition: like new (used), Year of construction: 2023, RHTC hydraulic workshop press HF-2 in good condition. Specifications: Knodpfx Akozivkzs Aja Pressing force: 30 tons Maximum pressure: 374.6 bar Cylinder stroke: 160 mm System capacity: 1.65 liters Fixed cylinder Working width: 565 mm Weight: 165 kg Professional quality, suitable for pressing bearings, bushings, axles, and other workshop tasks. Laser roller stand also for sale. Price: €1,250 excluding VAT.

Condition: excellent (used), Material storage cabinet – sliding door cabinet – workshop cabinet Width 2000 mm Depth 500 mm Height 1950 mm Kodpfxozmu Hvo Ak Ajna

Condition: used, Sheet metal cabinet with hinged door, LID Knsdpfxjznn Hxj Ak Aoa Original lid for the accessory cabinet Lid for FP1 / FP2 / FP3 with 2 sliding shelves without contents Length: 1000 mm Width: 750 mm Height: 960 mm

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: HAW07.5-2-22-T96, overall weight: 100 kg, total length: 600 mm, total width: 400 mm, total height: 900 mm, input voltage: 400 V, type of input current: AC, input frequency: 50 Hz, power: 7.5 kW (10.20 HP), operating pressure: 250 bar, Equipment: hydraulics, Hydraulic power packs from 1.1 to 22 KW output ⦁ Drive type electric motor - petrol engine - diesel engine or PTO driven ⦁ Hydraulic oil tank 36L - 96L - 144L - 250L or according to customer requirements Knsdpot U Uiaefx Ak Aea ⦁ Hydraulic pump Gear pumps or axial piston pumps ⦁ Additional components such as valves and control technology ⦁ Tank size 36L - 96L - 144L - 250L or according to customer requirements (customer drawing)

Condition: new, Pressing force: 100 t Maximum stroke: 380 mm Working width between columns: 1100 mm Cylinder diameter: 220 mm Diameter of the piston rod: 90 mm Diameter of the piston head: 120 mm Pressing speed: 2.47 mm/s Feed speed: 7.54 mm/s Retraction speed: 9.06 mm/s Knsdpfxehauyyo Ak Aoa Motor power: 2.2 kW Machine dimensions L x W x H: 1665 x 865 x 2140 mm Weight: 970 kg Accessories / Special features: • Adjustable cylinder • Chrome-plated, hardened piston with detachable base • Integrated pressure gauge • Pressure regulation • Two speeds and regulating valve • Adjustable work table • Joystick for operating the piston • Hand pump with dual operation for highly precise pressing operations • CE compliant Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D-44143 Dortmund - Wambel

Condition: good (used), ABUS Workshop Crane 500 kg Knsdpfx Aszrw Exsk Aoa Description: For sale is a professional, free-standing light crane system from the market leader ABUS (HB System series), manufactured in 2008. The unit is in very well-maintained, clean condition and comes directly from an active production environment. It is perfectly suited for workshops, metal fabrication shops, automotive facilities, or welding stations, allowing loads of up to 500 kg to be moved precisely and effortlessly. Technical Data & Details: Crane & Hoist Manufacturer: ABUS Kransysteme GmbH Hoist Model: Original ABUS ABUCompact electric chain hoist (Serial No. 05 08 0598 / 02) Load Capacity: Max. 500 kg (official ABUS marking present on the bridge) Design Type: Free-standing support structure made of solid I-beam steel sections. No ceiling or wall mounting required! Construction: High-strength bolted connections with large gusset plates and additional diagonal bracing for maximum structural stability. Floor Mounting: The pillars feature thick base plates for secure anchoring to the workshop floor using heavy-duty anchors. Power Supply: Professional, original ABUS festoon system (C-rail with cable trolleys) ensuring a tangle-free power supply along the entire length of the track. Operation: Includes original ABUS floor-level control (pendant control) with two-stage push-buttons and an integrated emergency stop switch for precise operation directly from the ground. Condition: Dismantled and ready for loading Pickup: Free of charge by the buyer Loading Service: A forklift is available on-site. We are happy to assist with loading onto your transport vehicle free of charge. "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de You can find more items—both new and used—in our shop! International shipping costs on request!

Condition: new, Year of construction: 2026, functionality: fully functional, 140L Parts Washer The 140L parts washer is a professional workshop cleaning machine designed for the effective removal of oil, grease, deposits, and other stubborn contaminants from mechanical parts and components. The closed-loop cleaning solution system allows for efficient use of the cleaning fluid while reducing consumption. The large tank capacity, robust construction, and convenient working area make the 140L workshop parts washer an excellent choice for mechanical workshops, automotive service centers, manufacturing facilities, and maintenance departments. Key Advantages of the 140L Workshop Parts Washer 140-liter tank capacity – provides ample space for cleaning larger parts and components. Up to 90 liters of cleaning solution – the large working fluid capacity allows for longer operation without frequent refilling. Efficient 2.7–3.6 l/min pump – enables precise application of the cleaning solution to the components being cleaned. Closed-loop system – allows the cleaning solution to be reused and helps reduce consumption. Automatic lid lock – improves operator safety and convenience. Stable four-leg construction – provides excellent stability during operation. Practical work surface – provides a convenient place to put tools, parts, and accessories. Parts Cleaning Concentrate Included The MP140 parts washer comes with 2 liters of concentrate for workshop parts washers. When preparing a 10% solution, the concentrate is sufficient to produce up to 20 liters of ready-to-use cleaning solution. The appropriate concentration should be selected according to the type of surface, the nature of the contamination, and the cleaning method used. Recommended Solution Concentration Immersion cleaning: 5–10% Low-pressure cleaning: 2–10% High-pressure cleaning: 2–5% Concentrate pH value: 12.8 Parts Washer Construction and Operating Principle The 140L parts washer is equipped with a flexible hose fitted with a spray nozzle. The cleaning solution is drawn from the tank and delivered through the pump to the hose, allowing the operator to precisely direct the stream onto contaminated surfaces. For proper operation, the pump inlet must be completely submerged in the cleaning solution. This ensures an adequate flow of cleaning fluid during operation. Kodpfx Aeztwh Ajk Ajna The tank lid opens conveniently and automatically locks in the raised position, improving operator safety. The entire unit is mounted on a robust steel frame with four legs, providing stability even during intensive use. With dimensions of 1,130 × 540 × 885 mm, the parts washer can be installed in most workshop environments while still providing a large and practical working area. Standard Equipment Working tank with automatically locking lid Pump with flexible hose and spray nozzle Steel frame with four legs Work surface beneath the tank Assembly and operating instructions 2 liters of concentrate for workshop parts washers Technical Specifications Specification Value Tank capacity 140 l Maximum cleaning solution capacity 90 l Pump flow rate 2.7–3.6 l/min Power supply 230 V Overall dimensions 1,130 × 540 × 885 mm Working tray dimensions 800 × 500 mm Weight 43 kg

Condition: new, Year of construction: 2026, functionality: fully functional, AURORA MP150 Pressure Parts Washer The AURORA MP150 pressure parts washer is a compact workshop cleaning machine designed for cleaning mechanical parts, tools, and components. The enclosed working cabinet helps reduce liquid splashing, while the operating pressure of 5–8 bar makes it easier to remove oil, grease, carbon deposits, and other stubborn contaminants. The parts washer uses a closed-loop cleaning solution system, allowing the cleaning fluid to be reused during ongoing work. The dual-function pneumatic gun enables both cleaning with a mixture of cleaning solution and compressed air and subsequent blow-off and drying of cleaned components. AURORA MP150 Workshop Parts Washer – Key Advantages 5–8 bar operating pressure – effectively removes oil, grease, carbon deposits, and other contaminants, including from hard-to-reach areas. Dual-function pneumatic gun – enables cleaning with cleaning solution and compressed air, as well as blow-off cleaning using compressed air alone. Closed-loop cleaning solution system – helps reduce cleaning agent consumption during regular operation. Working cabinet lighting – provides better visibility of cleaned surfaces, openings, and hard-to-reach areas. Integrated work gloves – make it easier to handle components without opening the cabinet. Lid support cylinders – make opening and closing the working chamber easier. Cabinet ventilation – supports air circulation while the machine is operating. Compact benchtop design – the parts washer can be placed on a stable and sufficiently strong table or workbench. Parts Cleaning Concentrate Included The MP150 parts washer comes with 2 liters of concentrate for workshop parts washers. When preparing a 10% solution, the concentrate is sufficient to produce up to 20 liters of ready-to-use cleaning solution. The appropriate concentration should be selected according to the type of surface, the nature of the contamination, and the cleaning method used. Recommended Solution Concentration Immersion cleaning: 5–10% Low-pressure cleaning: 2–10% High-pressure cleaning: 2–5% Concentrate pH value: 12.8 Parts Washer with Dual-Function Pneumatic Gun The AURORA MP150 is equipped with a pneumatic gun featuring two operating modes, allowing a single device to perform both thorough cleaning and blow-off drying of components. In cleaning mode, a mixture of cleaning solution and compressed air is discharged from the nozzle. The pressurized stream helps remove contaminants from openings, channels, recesses, and surfaces with complex shapes. After cleaning, the gun can be switched to blow-off mode. Compressed air removes residual cleaning solution from surfaces and hard-to-reach areas, making it easier to prepare components for further use, inspection, repair, or assembly. The AURORA MP150 Parts Washer Comes as Standard With Dual-function pneumatic gun Integrated work gloves Interior cabinet lighting Ventilation system Lid support cylinders Compressed air supply adjustment 2 liters of concentrate for workshop parts washers Technical Specifications Specification Value Cabinet capacity 150 l Cleaning solution tank capacity 8–14 l Operating pressure 5–8 bar Dimensions 770 × 610 × 700 mm Weight 29 kg Kodpfxoztwg Ss Ak Aona Gun Dual-function pneumatic Cabinet lighting Yes Ventilation Yes

Condition: new, Year of construction: 2026, functionality: fully functional, CORMAK MP180 Pressure Parts Washer The CORMAK MP180 pressure parts washer is a professional industrial cleaning machine designed for the effective removal of heavy dirt from mechanical, metal, and industrial components. The combination of high pressure, heated cleaning solution, and a stainless steel construction ensures excellent cleaning performance, durability, and convenience in everyday operation. Knjdpfx Asztwa Sek Aea The closed-loop cleaning solution system allows for economical use of the cleaning agent, while the ability to heat the liquid to a temperature of up to 70°C increases the effectiveness of removing stubborn contaminants such as oils, grease, fats, carbon deposits, and other residues. The MP180 parts washer has been designed for professional workshops, service centers, and industrial facilities where precision, durability, and cleaning efficiency are essential. Key Advantages of the MP180 Parts Washer Closed-loop cleaning system with heated cleaning solution – effective removal of stubborn contaminants thanks to an operating temperature of up to 70°C. High operating pressure of up to 8 bar – enables thorough cleaning of hard-to-reach surfaces and heavily soiled components. Stainless steel construction – provides excellent resistance to corrosion, moisture, and intensive use. Dual-function cleaning gun – allows operation using compressed air alone or a mixture of air and cleaning solution, as well as drying components after washing. Adjustable leveling feet – ensure stable positioning of the machine even on uneven surfaces. Parts Cleaning Concentrate Included The MP180 parts washer comes with 2 liters of concentrate for workshop parts washers. When preparing a 10% solution, the concentrate is sufficient to produce up to 20 liters of ready-to-use cleaning solution. For the best cleaning results, it is recommended to use an aqueous solution at a temperature of between 40 and 70°C. The appropriate concentration should be selected according to the type of surface, the nature of the contamination, and the cleaning method used. Recommended Solution Concentration Immersion cleaning: 5–10% Low-pressure cleaning: 2–10% High-pressure cleaning: 2–5% Concentrate pH value: 12.8 MP180 Construction and Technology The MP180 parts washer is equipped with a spacious working chamber and a cleaning solution heating system. The elevated liquid temperature increases the effectiveness of the cleaning process and helps remove stubborn contaminants more quickly. The robust stainless steel construction provides excellent resistance to moisture, dirt, and demanding working conditions. This makes the machine suitable for regular use in workshops, service centers, and industrial facilities. Standard Equipment Dual-function gun – air / liquid + air Cleaning solution heating system 180-liter working chamber Stainless steel construction Adjustable leveling feet 2 liters of concentrate for workshop parts washers Technical Specifications Parts washer capacity 180 l Voltage 230 V Frequency 50 Hz Weight 56 kg Height with legs 1,450 mm Height without legs 920 mm Internal width 740 mm Internal height to open lid 410 mm Internal depth 500 mm Loading height 360 mm Loading width 700 mm

Condition: new, power: 349 kW (474.51 HP), first registration: 11/2024, fuel type: diesel, tire size: 325/95R24, axle configuration: 6x6, wheelbase: 4,500 mm, fuel: diesel, fuel tank capacity: 390 l, color: white, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro3, suspension: steel, total length: 9,660 mm, total width: 2,500 mm, total height: 4,060 mm, Year of construction: 2023, Equipment: air conditioning, = Additional Options and Accessories = - Leaf spring suspension - PTO (Power Take-Off) - Sleeper cab - Windshield = Notes = Knsdpfezq D Tajx Ak Aja Fuel tank: 390 liters Air conditioning Equipped with Fassi crane and workshop unit: Type: F155A.0.22 Max. lifting moment 13.56 tm / 133 kNm Standard hydraulic reach: 8.30 m Load at the max horizontal outreach: 1,660 kg Manually extendable outriggers with a max spread of 4,375 mm. Outrigger rams have a jointed plate made of Monocast material. Lifting capacity: 6,160 kg / 2.15 m 3,150 kg / 4.30 m 2,190 kg / 6.10 m 1,660 kg / 8.00 m Platform and Equipment: Compressor Kaeser M27 Oil service Grease service Coolant service High-pressure water unit Fuel tank: 3,000 liters Tools with a workbench Generating set Electric tools Dimensions: length: 5,500 mm - width: 2,500 mm = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 12,882 cc Transmission Gearbox: ZF16S2520TO, manual transmission Axle Configuration Tire size: 325/95R24 Brakes: Drum brakes Suspension: Leaf spring suspension Front axle: Steerable Weights Unladen weight: 19,140 kg Payload: 14,360 kg GVWR (Gross Vehicle Weight): 33,500 kg

Condition: new, Year of construction: 2026, TECHNICAL DATA Pressing force 30t Maximum load on prism jaw 7.5t Piston stroke 160mm Piston travel 550mm Dimensions and weights Length (product) approx. 1240mm Width/Depth (product) approx. 650mm Height (product) approx. 1920mm Weight (net) approx. 280kg Clear opening 790mm Maximum installation height 1030mm Frame depth 200mm SCOPE OF DELIVERY 2-part prism set for inserting round material Hand and foot levers Winch for raising and lowering the table Location: Ex works Ksdpfxei Amnps Ak Ajna - available for immediate delivery -

Condition: good (used), Year of construction: 2000, Offer 24467 Technical data: - max. pressing force 10 t - max. ram stroke approx. 550 mm - Tool mounting thread M 16 - Width of column approx. 1000 mm Kjdpfx Ajuzhmgjk Aena - Column depth approx. 500 mm - Min. / max. installation height 450 / 1350 mm - Table height adjustable - Space requirement approx. W 1600 x H 2650 x D 850 mm - Weight approx. 350 kg

Year of construction: 2020, condition: excellent (used), WM1 300 CNC incl. Renishaw TP 200 Year of manufacture: 2020 Clamping tools from DK Fixiersysteme 3-axis CNC control High-resolution CCD matrix camera 1.5x magnification Incident lighting via LED ring light; 4 sectors and 1 ring individually switchable Precision measuring stage (X and Y axes) Diode laser for positioning assistance Joystick and trackball for axis movement with fast/slow toggle Camera-based measurement data acquisition Knjdozpwd Nopfx Ak Aoa Precise edge detection in transmitted and incident light using intelligent image processing algorithms Compact and handy – high performance Rapid operation with maximum measurement precision Special features Incl. Renishaw TP 200 touch probe system Switchable LED surface illumination Diode laser for positioning assistance With a measuring range of 300 mm × 200 mm × 200 mm, it excels particularly with stamped parts, plastic and rubber components, milled parts, tools, profiles, and PCBs. Key highlights of the measuring microscope include camera-based measurement data acquisition, rapid operation, and high precision. Another notable feature is the precise edge detection in transmitted and incident light using smart image processing algorithms. Despite its high performance, the WM 1 300 CNC is compact and handy, measuring 900 mm × 950 mm × 950 mm. Please feel free to contact us if you have any further questions!

Year of construction: 2023, operating hours: 100 h, condition: as good as new (ex-display), functionality: fully functional, load capacity: 1,600 kg, Motorized gantry. Height under beam 9M Motorized trolley stroke 4.5M Capacity 1600 Kgs Wired remote control and Wireless remote control. Photos on request Knjdpfx Akjvrih Ne Aea

Condition: used, Tool trolley, workshop trolley, mobile workshop trolley, drawer cabinet -Width: 560 mm -Depth: 665 mm -Height: 800 mm -Weight: 78 kg Kjdpfx Aod I Da Rek Asna

Condition: good (used), Tool trolley, workshop trolley, mobile workshop trolley, drawer cabinet, trolley Kjdpfjv Ivu Iex Ak Ajna -Manufacturer: Würth, workshop trolley, sturdy tool trolley -12 drawers: lockable, see photos for layout -Dimensions total: 680/460/H1045 mm -Weight: 70 kg

Condition: used, Tool trolley, workshop trolley, mobile workshop trolley, drawer cabinet, trolley -Workshop trolley: stable tool trolley -4 drawers: lockable, see photos for layout Ksdorxgwqepfx Ak Asna -Contents: 25 tool carriers HSK A63/B80 -Total dimensions: 885/555/H995 mm -Weight: 101kg