Used Flanging for sale (1,506)

Condition: used, tank capacity: 5,000 l, GENERAL Equipment: Crane lugs Design: vertical Remarks: Heating/cooling jacket can also be operated at 3 bar and 143°C (see photo of the nameplate); minor dents in the insulation jacket; sheet metal incisions in the insulation (especially in the lower base) External diameter: 1,830 mm Internal diameter: 1,690 mm Total height: 3,300 mm Heating/cooling: available Insulation: available Max. permissible operating temperature: 100 °C Max. permissible operating pressure: 4.0 bar Agitator: agitator flange Location: Bremen Cylinder temperature control: Thermoplate Nameplate: Volume: 5,000 liters Double jacket volume: 58.0 liters Product-contact material: V4A 1.4401/04 (AISI316) Condition: used Cylindrical height: 2,100 mm Previous application: food industry TANK Max. permissible operating temperature: 100 °C Support type: feet Number of feet: 3 pcs. HEATING/COOLING JACKET Bottom temperature control: Thermoplate INSULATION Insulation jacket: welded Bdedpeyciy Rsfx Ab Usa Insulation jacket material: stainless steel EQUIPMENT Manway / dome: in top head (DN 500) Outlet: 50 mm Note: slight residues MATERIAL PROPERTIES Temperature control system material: V2A 1.4301 (AISI304) Feet material: stainless steel AGITATOR Agitator arrangement: off-center in top head

Condition: used, tank capacity: 318 l, GENERAL INFORMATION Bsdsx Dlnfepfx Ab Uoda Design: vertical Remarks: Radii of the heating coil inside the tank (see photos); handhole diameter approx. 300 mm Outer diameter: 880 mm Inner diameter: 740 mm Total height: 1,550 mm Heating/Cooling: available Insulation: available Max. permissible operating temperature: 143 °C Max. permissible operating overpressure: 6.0 bar Max. overpressure: 3.0 bar Agitator: agitator flange Base type: feet Location: Bremen Cylinder temperature control: half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 318 litres Double jacket volume: 21.0 litres Product-contact material: V4A 1.4571 (AISI316) Condition: used Last application: cosmetics TANK Max. permissible operating temperature: 143 °C Number of feet: 3 pcs HEATING/COOLING JACKET Bottom temperature control: half-pipe coil INSULATION Insulation jacket: hermetically welded Insulation jacket material: stainless steel EQUIPMENT Manhole / dome: handhole Outlet: 38 mm MATERIAL SPECIFICATION Temperature control system material: V4A 1.4571 (AISI316) Feet material: stainless steel AGITATOR 1 Agitator arrangement: eccentric on the top head

Condition: used, tank capacity: 19,000 l, GENERAL INFORMATION Equipment: Crane lugs Bjdpfx Abeyci Uhe Ujda Design: Vertical Remarks: Base skirt made of V2A Internal diameter: 2,000 mm Total height: 7,150 mm Max. overpressure: 0.2 bar Agitator: Agitator flange Location: Bremen Technical documentation: Drawings, various documents Nameplate: Vacuum: 0.2 bar Volume: 19,000 liters Cylinder wall thickness: 5 mm Product-contact material: V4A 1.4571 (AISI 316) Condition: Used Cylindrical height: 5,570 mm Last application: Pharmaceutical chemicals TANK Specific gravity of medium: 1.4 (t/m³) Base design: Support skirt EQUIPMENT Manhole / Dome: In top head (DN 600) Outlet: Present Note: Light residues, manhole cover plated AGITATOR Agitator arrangement: Side-mounted on cylinder TECHNICAL DATA / DIMENSIONS Bottom head wall thickness: 5.8 mm Top head wall thickness: 5.4 mm

Condition: used, tank capacity: 1,813 l, GENERAL Design: upright Internal diameter: 1,195 mm Total height: 2,600 mm Max. overpressure: 1.0 bar Agitator: agitator flange Type of support: feet Location: Bremen Nameplate: Vacuum: 1.0 bar Volume: 1,813 liters Wall thickness, cylinder: 4.2 mm Product-contact material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 1,260 mm Previous application: chemical industry TANK Max. operating temperature / °C: 100 °C Number of feet: 4 pcs EQUIPMENT Manhole / dome: in the top head Outlet: available Remark: minor adhesions MATERIAL SPECIFICATION Feet material: steel Bodpfxexqdrve Ab Uoda AGITATOR Baffle: Agitator positioning: eccentric in the top head TECHNICAL DATA / DIMENSIONS Wall thickness, heads: 4.7 mm

Condition: used, tank capacity: 100,000 l, GENERAL INFORMATION Features: Ventilation / Deaeration Design: Vertical Remarks: Sloped conical bottom for drainage towards outlet (installation requires concrete foundation on site); total height estimated according to drawing (minor deviations possible); Cylinder wall thickness: 4/3/2.5 mm Internal diameter: 3,350 mm Total height: 12,500 mm Agitator: Agitator flange Location: Outdoor storage Technical documentation: Drawing Nameplate: Volume: 100,000 litres Product-contact material: V2A 1.4301 (AISI 304) Condition: Used Cylindrical height: 11,500 mm Previous application: Caustic/Acid/Neutralisation tank (wash water) TANK Bottom: Flat bottom with slope EQUIPMENT Manhole / Dome: In cylinder (approx. 350 x 450 mm) Outlet: 100 mm Note: Slight residues/adhesions AGITATOR Agitator arrangement: Mounted laterally on cylinder Bjdpeyci Nljfx Ab Ujda TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 4 mm Top wall thickness: 3 mm

Condition: used, tank capacity: 1,000 l, GENERAL Equipment: spray head Design: upright Remarks: Manhole diameter 420 mm; 2 longitudinal sight glasses in the cylinder; outlet fitting (disc valve) incomplete Inner diameter: 1,040 mm Total height: 2,350 mm Agitator: agitator flange Base type: height-adjustable feet Location: Bremen Volume: 1,000 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 1,190 mm TANK Number of feet: 4 pcs EQUIPMENT Manhole / Dome: on the top cover Outlet: 60 mm MATERIAL PROPERTIES Feet material: stainless steel Bsdpfxsx Dluxo Ab Ueda AGITATOR 1 Agitator arrangement: eccentric on top cover

Condition: excellent (used), Butterfly valve, flap valve, ball valve, butterfly valve, gate valve, diaphragm valve, diaphragm shut-off valve, flanged shut-off valve -Manufacturer: KSB, gate valve type BOA-W Bedpfx Aorp Ikrob Ueda -Connection: DN 50 PN 6 -Number: 3x valve available -Price: per piece -Dimensions: 230/140/H260 mm -Weight: 8.6 kg/piece

Condition: new, For sale: High-quality industrial heater from HTT (the energy performer). Condition: New, unused; has been in storage (warehouse stock, slight storage marks possible). 🔧 Technical specifications: Manufacturer: HTT Part number: KA19-03910/1/1 Serial number: 6170G953 Power: 40 kW Voltage: 400-440V, 3 Phase (V/3Ph) Protection class: IP66 Design: Flanged Certification: CE 📏 Construction: Multi-element heater (multiple heating tubes) Robust industrial design Aluminum connection box Flanged connection 💡 Applications: Heating of water and process liquids Industrial tanks Production installations Heating and process systems Bdedpjyx I Sfsfx Ab Uja 📦 Included: Exactly what is shown in the photos

Condition: new, For sale: high-quality industrial heating element (heizstab) by HTT energy GmbH. Bdedpjyx I Rzsfx Ab Uoa Condition: New, unused, stored in warehouse (may have minimal storage marks). 🔧 Technical specifications: Manufacturer: HTT energy GmbH Article number: 20178 Order number: 7122-001 Power: 50 kW Voltage: 400V (3-phase), 50-60 Hz Current: 72.2 A Protection rating: IP65 Max pressure: 10 bar Temperature range: 5 - 350°C Year of production: 2021 📏 Construction: flange heater multi-tube design junction box with terminals 💡 Application: heating water, oil, and other liquids industrial tanks technology installations heating systems 📦 Included: Exactly what is shown in the photos

Condition: new, max. width of grinding wheel 145 mm diameter / bore of grinding wheel 300 mm Flange taper Reishauer 0 grinding wheel size 300x145x160 mm Beam flange (machine type Reishauer RZ 400/800/1000) + including grinding disc T1SP 300x145x160 M1 EW20° 2GG from the company 3M Bdjdpeuayymjfx Ab Uoa Ceramic grinding discs for tooth flank grinding - 145 mm wide Dimensions according to machine type Reishauer Profiling according to specification module m, running speed gg, pressure angle EW Advantages: - Grinding burn risk is close to zero - Up to 50% shorter sanding times - 2-fold reduction in dressing effort - Twice the service life of grinding discs - Continuous, consistent sanding performance - Significantly higher sanding parameters than with standard tools

Condition: new, max. width of grinding wheel 145 mm diameter / bore of grinding wheel 300 mm Flange taper Reishauer 0 grinding wheel size 300x145x160 mm Beam flange (machine type Reishauer RZ 400/800/1000) + including grinding disc T1SP 300x145x160 M 1,5 EW20° 3GG from the company 3M Ceramic grinding discs for tooth flank grinding - 145 mm wide Bdjdpsuayy Hefx Ab Uea Dimensions according to machine type Reishauer Profiling according to specification module m, running speed gg, pressure angle EW Advantages: - Grinding burn risk is close to zero - Up to 50% shorter sanding times - 2-fold reduction in dressing effort - Twice the service life of grinding discs - Continuous, consistent sanding performance - Significantly higher sanding parameters than with standard tools

Condition: like new (used), max. width of grinding wheel 77 mm diameter / bore of grinding wheel 400 / 56 mm - Klingelnberg grinding disc holder (627.020.006) outer diameter Ø 260 mm / inner diameter Ø 56 mm - incl. grinding disc from Carborundum dilumit Bdedsxgv Afepfx Ab Uja Outer diameter Ø 400 see pictures technical drawing

Condition: new, max. width of grinding wheel 145 mm diameter / bore of grinding wheel 300 mm Flange taper Reishauer 0 grinding wheel size 300x145x160 mm Beam flange (machine type Reishauer RZ 400/800/1000) + including grinding disc Bjdpfxeuayyye Ab Ueda T1SP 300x145x160 M 2,25 EW20° 3GG from the company 3M Ceramic grinding discs for tooth flank grinding - 145 mm wide Dimensions according to machine type Reishauer Profiling according to specification module m, running speed gg, pressure angle EW Advantages: - Grinding burn risk is close to zero - Up to 50% shorter sanding times - 2-fold reduction in dressing effort - Twice the service life of grinding discs - Continuous, consistent sanding performance - Significantly higher sanding parameters than with standard tools

Condition: new, max. width of grinding wheel 145 mm diameter / bore of grinding wheel 300 mm Flange taper Reishauer 0 grinding wheel size 300x145x160 mm Beam flange (machine type Reishauer RZ 400/800/1000) + including grinding disc Bsdpfeuayy Tsx Ab Ueda T1SP 300x145x160 M 2,5 EW20° 3GG Cubitron from the company 3M Ceramic grinding discs for tooth flank grinding - 145 mm wide Dimensions according to machine type Reishauer Profiling according to specification module m, running speed gg, pressure angle EW Advantages: - Grinding burn risk is close to zero - Up to 50% shorter sanding times - 2-fold reduction in dressing effort - Twice the service life of grinding discs - Continuous, consistent sanding performance - Significantly higher sanding parameters than with standard tools

Condition: used, Fasti 417 Beading and Flanging Machine with motorized drive and hydraulic adjustment of the upper roll Condition: Used Technical data Type 125/3 Capacity: 3.0 mm Roller center distance: 125 mm Throat depth: 500 mm Working depth: 430 mm Drive 2 (standard): 1.5/2.5 kW Drive 3: 3.0 kW Hydraulic drive: 0.75 kW Details Without rolls Without back gauge Gear motor with pole-changing capability V06/12 m/min. Bsdpfxeyxdl Ij Ab Ueda

Condition: excellent (used), For sale: VEM electric motor in industrial version. The motor is used, in good visual condition. Visible signs of use and deposits and rust on the flange resulting from operation and storage. The motor is operational. Ideal for industrial applications, machinery, pumps, fans, and production lines. Technical data: Manufacturer: VEM Power: 7.5 kW Rotational speed: approx. 2880 rpm Voltage: 400/690 V Frequency: 50 Hz Supply: 3 phase Cos φ: 0.86 Protection class: IP55 Insulation class: F Weight: approx. 57 kg Design: IM B3 Dimensions: Flange diameter: approx. 300 mm Shaft diameter: approx. 38 mm Bdsdpsyv Uuzefx Ab Uoa Condition: Used Signs of use Visible corrosion on parts

Condition: good (used), Year of construction: 2017, Here you can purchase a Schechtl folding bench – manual folding machine from the leading manufacturer. The machine has been well maintained and is now being replaced by a motorised version. Handover will occur only after the new machine is delivered (week 21). Bending length approx. 3.10 m. Bending capacity: 1 mm steel – higher for aluminium. Includes both thick and thin insertion rails. Optional depth stop available (see photo). Bdodpfx Aoylug Isb Uea

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 15112, overall weight: 2,110 kg, input voltage: 400 V, back gauge: 1,000 mm, For sale: Götendes K15-25 press brake in good working condition. A reliable and robust machine, well-suited for a wide range of bending applications. Bdodpfeyw Iaysx Ab Uja Specifications: Model: Götendes K15-25 Year: 2008 Condition: Fully functional, regularly maintained Control system: EasyLink Max sheet thicness: 1,5 mm steel Bending length: 2550 The machine has been used in a professional environment and is ready for immediate operation. Known for its durability and precision, Götendes press brakes are a solid choice for workshops requiring dependable performance.

Condition: good (used), Chuck flange, flange holder, lathe chuck flange, driving flange, intermediate flange, lathe chuck face plate -Chuck flange: for three-jaw chuck, four-jaw chuck, faceplate -Outside: Ø 250 mm -Bolt circle: Ø133 mm -Hole: short cone 6, cone Ø 103 - 105 mm -Dimensions total Ø 250 x 80 mm -Weight: 6.6 kg Bdodpfx Aev Sy Awsb Usa

Condition: ready for operation (used), Fasti Beading Machine Size 4 150 x 4mm Output Max. Throat 500mm Hydraulic adjustment of the top roller via foot switch Right/left rotation Continuous speed adjustment via handwheel 60mm Mount Weight approx. 1500kg with accessories Year of manufacture 1963 Bdodpjv Tqy Nsfx Ab Usa Space requirement approx. 1000x1000x1750mm

Condition: new, Year of construction: 2026, MBM series machine • easy start-up in the engine efficiency class • designed for smooth and efficient one-person operation • produce complete profiles in one operation and repeat them exactly at any time • Wear-free and maintenance-free direct eccentric drive Standard equipment: • 1 sharp rail 20°, radius 1 mm, offset, 66/24 mm for the pressure beam • 1 insert rail 68/10 mm and 68/24 mm for the bending beam • Motorised rear stop 6-750 mm • foot switch Bdsdpjwf Hghofx Ab Usa • 16 A connection plug with 5 m cable (within the EU) • connection voltage: 3 x 400 Volt, 50 Hz (within the EU)

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 211619.00, grinding wheel diameter: 275 mm, mount diameter: 160 mm, 2 new unused grinding wheel flanges Reishauer part no. 211619.00 for grinding worms Ø275 / 160x160 RZ160 / RZ260 Flange for mounting grinding tools with a bore diameter of 160 mm and a width of up to 160 mm Bjdpfx Aox Eiyceb Uoda 300x160x160 All technical data subject to possible typographical errors/mistakes. Price on request Sale exclusively within EU countries.

Condition: new, Year of construction: 2026, Very robust, high-quality beading and flanging machines in heavy cast construction with electric motor drive – brand new. Optionally available with: - Hydraulic bending roll adjustment - Circle cutting device Bdsdpfjyxxf Aex Ab Usa Maximum sheet thickness that can be formed = 3 mm steel sheet / S235JR, depending on roll configuration Throat depth in machine frame: 450 mm Maximum distance between upper and lower roll: 100 mm Two working speeds: 6 and 33 rpm Available at extra cost with steplessly adjustable working speed and frequency converter Time relay for limiting the working cycle Drive power: 1.8 kW Hydraulic drive power: 1.5 kW Weight of basic machine: 570 kg When used as a circle shear (option): Blank diameters from 300 mm to 1,200 mm (optionally up to 1,620 mm) Cutting capacity with shear blades: 3 mm steel sheet / S235JR Weight of machine with circle cutting equipment: 730 kg

Condition: like new (used), functionality: fully functional, nominal power: 5.5 kW (7.48 HP), Bevel gear shaft-mounted geared motor Model: KUA70A 3B 132S-04E-TH Hollow shaft diameter: 45 mm Bdedpeyrckhsfx Ab Uja 5.5 kW electric motor For further data, see the nameplates

Condition: excellent (used), 2-hole flange bearing -Type: 01CJT05 -Designation/Type: Flange bearing unit -d = Inside: 25 Price: per piece Bsdpfx Abeb A S Hme Usda -Number: 71x available -Weight: 0.6 kg/piece