Used Flanging for sale (1,575)

Condition: excellent (used), Here we offer you a Bielomatik laser welding system. Bielomatik laser welding system Machine description: The laser unit with integrated cooling for the laser is located in the lower left part of the machine frame. The tools are mounted on a 2-station rotary table that rotates 180 degrees with each cycle. In the middle part of the machine frame, there is the working area with the welding station, the tool (on the rotary table), and the clamping device for the product. The control cabinet is installed at the rear. The welding station is protected against the loading/unloading area with a laser-safe enclosure. The welding laser (the laser power supply) is switched off when a maintenance door is opened. The loading and unloading of the welding parts is done manually. The welding process runs automatically. Laser type: YLR-300-AC-Y11/IPG The cell was used for laser welding of various plastic parts (front frames). For components with dimensions of approximately 460 x 280 mm. Basic data Machine equipment: 1 complete machine frame with enclosure, substructure, and safety devices, painted Adjustable machine feet, designed for transport with a forklift. 3 manual maintenance doors in the laser-safe processing area, each secured with a safety door switch with interlock. 4 manual maintenance doors below the machine table. The control cabinet is permanently mounted on the rear of the machine. Laser system manufactured by IPG. 1 fiber laser, 300W cw, at the fiber optic end, 1070nm, completely air-cooled. 1 power supply for the laser unit, target beam laser, and fiber optic cable. 1 Vario-Scan for 3D welding contour. 1 scanner - 20 aperture. Optics, F-Theta lens, focal length determines the processing field and processing distance. 2x base tool, tool coding with transponder. Clamping/tensioning system for holding a mask with absolute encoder. with pneumatic clamping system for controlled pressing of each welding part. Pneumatic air shower for protection of the lens housing. Microbox PC427B incl. RTX (Siemens). Pre-installed software, Siemens S7 PLC. Profibus, Profinet, Ethernet, RS232 interface. Touch panel 15" for operation and input of data/parameters. Machine lighting. Gbjdozgaazopfx Al Uou Connection flange for external extraction system. Machine data: Dimensions: Machine W x D x H: approx. 2330 x 2350 x 2500mm Control cabinet: Permanently screwed to the machine frame. Area required W x D: 5400 x 5400mm Technical data: Power supply: Number of phases/rated voltage 3x400V 50Hz Connected load 5KVA Fuse rating: 16A Exhaust: Nominal size ∅160 Airflow rate 500-1000 m³/h Weight approx. 2000 kg Type: K3633/023 Condition: used (Changes and errors in the technical data are reserved!) We are happy to answer any further questions you may have by telephone.

Condition: excellent (used), Eccentric chuck with key (28133) in a sturdy wooden transport box Manufacturer: Klopfer Gbsdpfx Aogzlmwel Uou Type: EZ 32 Diameter: 160 mm Overall diameter: 265 mm Height: 180 mm KK mounting size: 5 Cone diameter: 82.575 mm Bolt circle diameter: 104.8 mm Eccentric adjustment range: 0 - 32 mm The mounting flange can be replaced if necessary.

Condition: excellent (used), Eccentric chuck with key (28134) in a sturdy wooden transport box Manufacturer: Klopfer Type: EZ 32 Diameter: 160 mm Knife length: 265 mm Height: 180 mm KK mounting size: 5 Taper diameter: 82.575 mm Pitch circle diameter: 104.8 mm Gbedjgzlmzopfx Al Ueu Eccentric adjustment range: 0 - 32 mm includes a set of boring jaws includes a set of turning jaws Weight: 41.5 kg Weight with case: 55 kg The mounting flange can be replaced if required.

Year of construction: 2010, condition: excellent (used), Three-jaw chuck Manufacturer: Forkardt Model: F 250 Threaded spindle: 105 x 6 mm Cylinder diameter: 105 mm Outer diameter: 250 mm Gjdpfx Aofb T Dbel Ujbu Inner diameter: 63 mm Chuck height including flange: 180 mm Age is estimated.

Condition: good (used), Upper support Base plate 300 x 320 mm Gbjdpfx Aljb E Nw Is Ueu Bolt circle 265 mm in diameter Centering flange 100 mm in diameter Distance from base plate to steel holder: 185 mm

Condition: excellent (used), Splash guard Diameter 540 mm Godpfxofm Tqdj Al Uebu Height 125 mm Diameter of centering flange 120 mm Thread pitch 6 mm Thread M 120 x 6 Weight 115 kg

Condition: used, Year of construction: 2000, grinding length 600 mm grinding width 400 mm workpiece height 375 mm table adjustment - longitudinal max. 660 mm table cross movement max. 410 mm distance spindle center to table max. 525 mm table speeds 2 - 28 m/min table load max. 400 kg cross feed of table intermittent 3 - 40 mm rapid traverse cross 1 m/min grinding wheel size max. 300 x 50 x 76,2 mm total power requirement 8 kW weight of the machine ca. 2,1 t Gbedpjz D Itnsfx Al Ueu dimensions of machine L x W x H 2,75 x 1,7 x 2,42 m Accessories: magnetic plate 600 x 400 mm, grinding wheel with flange, 1 flange separate, DRO on Y-axis (vertical), wheel trueing attachment, balancing scale, wet grinding attachment

Condition: new, cutting width max. 310 mm Cutting height max. 125 mm Saw blade diameter 500 mm Motor output 5,5 kW Speed 2.800 U/min. Required air-pressure 6-8 bar Working height 900 +/- 20 mm Dimensions (L/W/H) 10645x1000x1300 mm SALVAMAC COMBO 500 – The semi-automatic miter saw with SALVASTOP 100 - electronic length stop/slider Gbjdpfx Aljvu Hd To Ueu ----- - Pos. 1: Legend 500 under table miter saw ----- - Maximum cutting area: 220x125/ 260x100/285x80/310x50 mm. When cutting boards that are on top of each other, h max. 100 mm. The structure is made entirely of thick-walled and reinforced full-surface painted steel. Solid floor mounting system with flanged steel feet for the mounting hole. Bimanual safety cut control in ergonomic position. Motor power of the saw motor 5.5 kW. Adjustable cutting speed via a pneumatic controller. Maximum system for weight balancing and longevity. Shock absorbing system. Independent pneumatic adjustment options to adapt to different types of processing. Durable and easily replaceable saw blade adjustment bar. HM circular saw blade, diameter 500 mm, Z=108. Pneumatic upper workpiece clamping press with electro-pneumatic control. Presser movement system using new ball bearings with double dust protection and automatic lubrication system. CE compliant electrical system. The CE models must come standard with at least 1 meter long support plates at the inlet and outlet. Technical specifications: ----- Saw cross-section max. mm. 220x125, 260x100, 285x80, 310x50 Saw blade motor power: 5.5 kW Saw blade diameter: 500 mm Saw blade type: HM Z=108 Saw blade rotation speed: 2800 rpm Air consumption per cycle: 7 Nl Intake manifold: 1 - 120 mm / 1 - 100 mm Air pressure: 6 - 8 bar Voltage: V 400/50Hz 3-phase Worktop height: 900 mm +- 20 mm Colour: Ral 7035 - Ral 1007 Pos. 2: Salvastop 100 electronic length stop ----- - - Working method: 2 modes 1 x stop (length stop moves to the specified length) and 1 x slide (several lengths are processed one after the other at the push of a button) - with servo drive - Ram speed: up to 60 m/min - slider length 600 mm - with a 7'' touch display - maximum weight of logs that can be pushed - up to 100 kg - USB connection COMBO_500 - 6400/7000 - Roller conveyor with guide to the right of the saw. Painted steel frame with galvanized castors. Load capacity 230 kg, diameter 60 mm, spacing 250 mm, width 320 mm. 3 m. - 6400/7000 SalvaStop 100 to the left of the saw. Working length 6.4 m. Total length 7.0 m. With table top 7 m. Width 320 mm. Demonstration machine additionally equipped with: UP & DOWN FRONT PROTECTION Movable instead of rigid front protection. The guard rises during cutting to ensure safe working conditions. Loading and unloading wood is simplified with the downward-facing guard. The system has another special, secured pneumatic system with linear guidance, which impresses with top quality and cutting-edge technology. SOFTWARE LINK FILES Preparation for data import via a Salvamac file template in CSV format. ----- Total price demonstration machine from stock 73447 Oberkochen: on request! ----- More options like longer/shorter inlet/outlet, Stop systems on re...

Condition: used, Year of construction: 2011, Technical details: turning length: 310 mm swing diameter over bed: 500 mm swing diameter over bed slide: 290 mm centre distance: 500 mm x-axis: 190 mm z-axis: z1: 335 / z3: 370 mm y-axis: 80 mm revolution per minute: 6000 U/min Control: Heidenhain CNC Pilot 4290 spindle bore: 73 mm bar material dia.: 50 mm tool turret - number of stations: 12 tool taper: VDI 30 mm rapid traverse x + z axis: 30 m/min operating hours - idle run: 36443 h spindle hours: 8545 h interface: ja total power requirement: 20 kVA kW dimension swarf conveyor LxWxH: 3,2 x 0,45 x 1,5 CNC inclined bed lathe With a 3-jaw chuck Ø 160mm with matching flange (max. speed 4500 rpm) and 2 additional sets of spare jaws. Turret head for 12 tools all with tool drive; Sauter disk turret (C-axis = 300 rpm) Torque main spindle: 95 Nm at 100% and 127 Nm at 40% Chip conveyor 450 K-1/250; year of manufacture 2000 Electric cabinet with Rittal cooling Gjdpfsw S Efzox Al Uobu The machine does not have a hydraulic chuck. A manual chuck has been installed by the previous owner. The machine is not functional and is for sale. The machine has an unknown malfunction in the turret, meaning that reference travel and axis movements are not possible. Machining functionality is therefore currently not possible. The machine is for sale and in need of repair! i.D. *

Condition: used, Technical details: faceplate diameter: 620 mm internal diameter: 160 mm dimensions: 620x160x140 mm weight of the machine approx.: ca. 160 kg Gsdou Nk Dwspfx Al Usbu 4 jaws faceplate flange intake/diameter : passage drill hole 160 mm flange diameter 197mm hole circle 235mm jaws are single guided with chuck key The given info are approx. values! *

Condition: used, Technical details: faceplate diameter: 1000 mm Gbodou N E E Nopfx Al Usu width: 150 mm boring diameter: Ø 130 mm max. passage: Ø 130 mm weight: 475 kg dimensions: Ø 1000 x 255 mm Equipment: -4x external/internal jaws; clamping travel approx. 200mm; clamping range max; approx. Ø 900mm / min. approx. Ø 100mm. -clamping flutes size according to DIN 650: a=22mm; h=43mm; b=40mm; c=16mm x length= 285mm Flange mounting: Ø inside: 195mm, depth 21mm 4x clamping bore pitch circle Ø 235mm *

Condition: good (used), hydraulic pump, oil pump, hydraulic unit, hydraulic pump, hydraulic pump, electric motor, DC motor, traction motor, drive motor Gedpfx Ajvwi E Ejl Uobu -Manufacturer: Bosch, hydraulic pump -Type: Flange/shaft: see photo, square 8 x 17 mm -Number: 6x pumps available -Price: per piece -Dimensions: 100/92/H84 mm -Weight: 2.0 kg

Condition: used, Year of construction: 2014, - Manufacturer: Cefa/Sorbini Godpfx Alsz Ehq Ne Ujbu - Model: SMARTCOATER MF-EVO - Year of manufacture: 2014 - Working width: 1,300 mm - Working height: 880 mm - 940 mm - Workpiece height: 3 - 80 mm - Operating side: right - Coating roller: rubber hardness ~ 50 - 60 Shore - Coating quantity: ~ 4-50g/m2 - Coating roller diameter: 250 mm - Metering roller diameter: 173 mm - Metering roller with switchable reverse operation - Double diaphragm pump: 1 piece - Transport system with conveyor belt - Compressed air connection: 6 bar - Machine is mobile on flanged rollers - Feed speed: ~ 4 - 20 m/min - Control cabinet is mounted on the rear of the machine - Voltage, frequency: 400 / 50 - Voltage fluctuations max. +/- 5 %

Condition: excellent (used), For sale is an industrial KSB ETABLOC-GN 50-200/1502.21 centrifugal pump, equipped with a 15 kW KSB electric motor. The pump is designed for industrial applications, technological installations, water circulation systems, and other suitable media. Pump technical data: Manufacturer: KSB Aktiengesellschaft Type: ETABLOC-GN 50-200/1502.21 Identification number: 48861841 Flow rate Q: 12–100 m³/h Head H: 55–34.5 m Rotational speed: 2900 rpm Connections: flanged Motor data: Manufacturer: KSB Gjdpfozvzu Eox Al Usbu Type: QUPA 160 M2B-6 Power: 15 kW / 50 Hz Voltage: 380–660–420 V Current: 27.8–16.1–25.2 A cos φ: 0.93 Protection class: IP55 Insulation class: F Motor weight: approx. 87 kg Condition: used, with normal signs of use and storage visible in the photos. A complete set consisting of the pump and electric motor is being sold, exactly as shown in the photos.

Condition: new, For sale: Original KSB RIO50-40D circulation pump, brand new, in its original packaging. The pump is intended for heating and cooling installations, as well as for applications in building technology and industry. ⸻ Technical Data • Manufacturer: KSB • Model / Type: RIO50-40D • ID Number: 29 132 136 • Power supply: 230V, 3~ 400 V / 50 Hz • Number of speeds: 3 • Power consumption (P1): 180 / 240 / 330 W Gbedpfxeyhhmgj Al Ueu • Nominal diameter: DN50 • Connection: flanged • Operating pressure: PN6 / PN10 • Max. medium temperature: 130°C • Protection class: IP44 • Insulation class: H • Weight: approx. 14.1 kg • Manufactured in: EU ⸻ Condition • New, unused • Original KSB packaging • Manufacturer's manual included • Condition exactly as shown in the pictures ⸻ Applications • Central heating systems • Heating and cooling circuits • Industrial and commercial facilities

Condition: new, For sale: New KSB ETABLOC GN 65-125 centrifugal pump with Siemens 5.5 kW motor. The unit is from warehouse stock – excellent condition, unused. KSB ETABLOC series pumps are high-quality industrial pumps designed for water installations, heating and cooling systems, process installations, and general industrial applications. Robust construction and a reputable Siemens motor ensure high reliability and long service life. Pump technical data • Manufacturer: KSB Aktiengesellschaft • Model: ETABLOC GN 65-125/552 • Capacity: 18 – 136 m³/h Godpfx Ajyuqxrel Usbu • Head: 11 – 19.2 m • Rotational speed: 2900 rpm Motor • Manufacturer: Siemens • Model: 1LA7130-2AA66 • Power: 5.5 kW • Voltage: 400 / 690 V • Protection class: IP55 • Housing: B35 The pump is equipped with flanged connections – ready for installation in your system.

Condition: new, For sale: high-quality centrifugal pump from renowned German manufacturer KSB, model ETALINE SYT ETL050-050-160, complete with electric motor. The unit is brand new, unused, stored as warehouse spare stock in its original transport crate. TECHNICAL DATA Manufacturer: KSB Model: ETALINE SYT ETL050-050-160 Pump type: Inline centrifugal pump Capacity Q: 40 m3/h Head H: 42 m Rotational speed: approx. 3493 rpm Impeller diameter: 153 mm Year of manufacture: 2020 Casing material: EN GJS 400 15 Flanged connections: DN50 MOTOR Manufacturer: WEG Power: 7.5 kW Supply voltage: 400 V Frequency: 50 Hz Speed: approx. 2900 rpm Efficiency class: IE3 Protection rating: IP55 CONDITION Gbsdpfx Aeywvnljl Uju New, unused Original transport crate Complete KSB documentation Possible minimal storage marks APPLICATIONS Industrial installations HVAC systems Heating and cooling installations Water and liquid circulation Pumping stations

Condition: new, Year of construction: 2013, shaft A2 changeable with CALZONI MR 1800 / N5 inclusive flange FL 4 D75 ( connection tubes) Gjdpfx Aohpihzol Uebu ( 2 pieces available) REPARATION SET FOR RADIAL PISTON MOTOR IAM1800 / C model 2013 - new consisting of: 1 x rotary distributor 1 x distributor plate 1 x bearing wave 1 1 x bearing wave 2 1 x seal kit (2 pieces available) jöma price: € 700,- / 1 set

Condition: new, power: 353 kW (479.95 HP), fuel type: diesel, overall weight: 26,000 kg, tire size: 315/70R22,5, axle configuration: 6x2, wheelbase: 4,500 mm, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, front tire size: 315/70R22,5, rear tire size: 315/70R22,5, Equipment: ABS, air conditioning, cabin, central locking, cruise control, differential lock, fog lights, traction control, trailer coupling, Vehicle location: in transit, short designation: Haus, 1 comfort seat, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, radio, cruise control, center console, ABS (anti-lock braking system), traction control (ASR), auxiliary drive, automatic transmission, lifting and lowering, differential lock, fog lights, leaf and air suspension, last axle can be lifted and steered, trailer hitch with air and light connections, last axle with trailing steering, central locking, green environmental badge. Wheelbase: 4500 mm, body: 20t roll-off system Hyva T21-57/60-S for containers 4.5 to 7m, disc brakes on front and rear axles, electronic braking system (EBS), emergency brake assist, transmission MAN TipMatic 12.26 DD, TipMatic shifting strategy, ride height on rear axle raised by 30mm for increased ground clearance above the rear axles (e.g. for ARK), trailing axle can be unloaded, lane departure warning system, central locking without remote control, short-distance driver cab NN, multi-function steering wheel adjustable in height and inclination, MAN App integration, wheelbase 1350mm between rear axle and trailing axle, instrument cluster Professional 12.3 inches, 310l aluminum tank on the right, transmission with auxiliary drive NH/4c without flange f=0.97 at approximately 3:30 o'clock, emergency braking assistant EBA cannot be deactivated, traffic sign recognition, tire pressure monitoring system (TPM) with tire temperature display, MAN Media System Medium 7 inches, MAN AttentionGuard alertness system cannot be deactivated, diesel engine MAN D2676 LFAY, 353 kW (480 hp) power, 2,450 Nm torque Euro 6e. Godpfxez N Sz Ue Al Uobu All information is without guarantee, as the vehicle is in transit! New vehicle from stock with registration date 10/2026! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: good (used), Bosch Turbo Scara SR 800 Swivel Arm Robot Manufacturer: Bosch Order No. 3842291811 Serial No. 469801012 Maximum load at the gripper flange: 100 N Stroke of the 3rd axis: 320 mm Operating pressure: 4-8 bar Weight: 100 kg Swivel range Mounted on an aluminum profile base frame. Item condition: used These robots were all kept as backup machines in the warehouse of a large automotive supplier, and as such, they are in very good condition. In addition to approximately 50 paternoster lifts, numerous other machines such as presses, robots, ovens, industrial vacuum cleaners, etc., are available. Workshop equipment, workbenches, workshop trolleys, tools, and forklifts are plentiful. Gsdpfxsg A N Tdo Al Uebu In total, 24,000 m² of production space will be dismantled and sold. Please also see our other offers. After purchase, the amount is due within 7 business days. You can find more items – new and used – in our shop! International shipping costs upon request!

Year of construction: 2022, condition: good (used), For sale, starting from our location in 55569 Monzingen, is a truck loading system consisting of two stainless steel external silos. The silos are used and in good condition. Gelatin powder was stored in the silos. Quantity: 2 Gross volume: 50 m³ Diameter: 3,500 mm Roof shape: Conical, 15° Cylinder height: 5,000 mm Bottom cone shape: Apex angle 60° Outlet diameter: 200 mm Equipment: Lifting eyes Hinged manhole, 600 mm diameter, with protective grille Support for over/under pressure protection Support, DN80 PN10, for filling line Support with blind flange Support for overflow Support for level switch We will be happy to provide further information about the system/silos upon request if you are interested in purchasing it. Gbjdpfsz I S Nnsx Al Usu The system is currently still in operation and can be inspected after prior arrangement. Dismantling, loading and transport are the responsibility of the buyer.

Condition: good (used), Kistler NC Joining Module with Dual Station/Spindle Unit Gedpfx Alezcpnzs Uobu Kistler NCFH 60 Servo Press with Feed Slide & Spindle Station The Kistler NCFH 60 NC Joining Module is integrated into an industrial dual station/spindle unit for automated series production (e.g., friction welding or precision pressing). The system is characterized by its high precision, integrated force-displacement monitoring (piezoelectric sensors), and an extremely robust design for industrial continuous operation. Precise Pressing and Joining: Ideal for highly accurate assembly processes in the automotive industry, electrical manufacturing, or general mechanical engineering. Integrated Quality Assurance (Force-Displacement Monitoring): Thanks to the built-in piezoelectric sensors, the module measures the exact tensile and compressive forces acting during the pressing process, depending on the position. Flexible Process Control: Enables advanced functions such as "joining on block," position-controlled pressing, or force-controlled joining (in combination with a suitable controller, e.g., Kistler maXYmos). Automated Workpiece Clamping: The attached spindle station features an automated clamping function (pneumatically/hydraulically actuated via integrated cylinders), perfect for automated series production and assembly lines. Stable Machine Bed: The entire mechanism is mounted on a heavy, welded steel frame to withstand the enormous forces (up to 6 tons per side) during operation. Manufacturer of Joining Module: Dr. Staiger Mohilo+Co GmbH / Kistler Group Type: 2151B 60304002 Model: NCFH 60 400 300 B H C G Nominal Force: 60 kN (corresponds to a pressing force of approx. 6 tons) Max. Total Spindle Stroke: 400 mm Max. Traverse Speed: 300 mm/s Motor Type: AC Servo Hollow Shaft Motor (165H-180E) Holding Brake: 18 Nm Certification: CE Marking Scope of Delivery: Kistler NCFH 60 Joining Module including mounted flange coupling, yellow slide/feed guide, complete sensor cabling, and the associated spindle clamping station and the maXYmos process monitoring system. "One-stop shop: We would be happy to offer you suitable bank financing for your project." You can find more new and used items in our shop! International shipping costs on request!

Condition: used, Bag filter housing – 4 size #2 bags – stainless steel 304 Number of bags 4 Bag size #2 Material Stainless steel 304 Housing dimension D (mm) 530 Height H (mm) approx. 1741 Max. working pressure (bar) 6 Design pressure (bar) 8 Max. working temperature (°C) 80 Inlet/outlet Ø108 flange Gedpfsz N Evfex Al Uobu Seal Silicone Surface Mirror polished Data source Individual drawing Dimensions and operating limits follow the assigned technical drawing. The offered material is stainless steel 304; the drawing also applies geometrically where its title block specifies a different material.

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2025, 1.1 General Features Extruder Type - Horizontal Screw Diameter (D) - 30 mm Screw Length (L/D) - 25 net (L: Effective length as specified according to Euromap-20 standards) Raw Material - PVC-W (soft) / PE / PP / TPE / TPV (in granule form) Application - Gasket profile Capacity - 12-18 kg/h (Capacity may vary depending on the characteristics of the raw material) Extruder Zone - 5 = 3 + 2 (3 on the barrel, 2 for die-head control) Extruder Main Motor and Driver - 4 kW (Yılmaz Gearbox) / 4 kW Siemens/ABB AC Driver Extruder Control - Gbjdpfxezarn Eo Al Uju Extruder Height - 900-1200 (adjustable) mm (Can be changed according to customer’s request) Die-Head Connection - Flange connection Extruder Colour - RAL 7043–RAL 7047–RAL 3020 (Extruder colour can be changed according to client’s request) Die-Head Unit - Not included Pressure and Temperature Sensor - Not included Electrical Panel - 380-400V / 50-60 Hz Languages - English 1.2 Technical Details Barrel - Barrel Dimension: Ø30/25D - Barrel Zone Number: 3 - Cooling System: Air - Heating System: Ceramic resistance - The manufacturer of the screw and barrel is TUV-certified ENFORMAK PT INC. - The material manufacturer of the screw and barrel is ISO 9001:2008-certified BGH EDELSTAHL from Germany. - The barrel is made of 1.8550 (DIN 12891) nitriding steel and long-term gas nitrided to 66-70 HRc with a hardness depth of 0.5 - 0.7 mm. - A flange connection will be used between the extruder and the die head. Screw - Screw Dimension: Ø30/25D - The manufacturer of the screw and barrel is TUV-certified ENFORMAK PT INC. - The material manufacturer of the screw and barrel is ISO 9001:2008-certified BGH EDELSTAHL from Germany. - The screw material is made of DIN 1.2891 (1.8550, 34 CrAlNi 7) nitriding steel and long-term gas nitrided to 66-70 HRc hardness at a depth of 0.6-0.7 mm. - The screw will be manufactured in an EBM Barrier design for good homogeneity. Heating System - Heating is provided by ceramic insulated band heaters, certified according to CE and ISO 9001:2008. - There are 3 heating zones on the barrel. Cooling System - Cooling is provided by centrifugal blowers from TUV-certified EBMpapst, Germany. - There are 3 air cooling zones on the barrel. Reducer Gearbox - A TUV-certified YILMAZ brand, 4 kW DRE series horizontal helical reduction gearbox will be used. - The motor has an additional cooler for protection against higher loads. - The motor speed will be controlled via an ABB ACS-880 brand 15 kW inverter drive. Electric Control Cabinet - The electric control cabinet is equipped with ISO 9001:2008-certified equipment. - There will be one main electrical panel. The control panel will be located on the extruder. - The extruder is controlled by the main electrical panel. - This includes speed control of the drive and zone temperatures, which will be controlled by this PLC system. - A 7” touch screen will be used on the extruder (master unit). Thanks to this panel, two extruders can be fully controlled. - The extruder’s screw speed can be adjusted steplessly by means of a 4 kW Siemens / ABB AC frequency motor driver. The following information can be accessed via the touch screen: ● Extruder screw speed, ● Zone temperature set points, ● Actual values, ● Extruder motor current, - more details available

Condition: good (used), Sawing and Drilling Machine KALTENBACH KDX 1215 and HDM 1432 Workpiece width: 1,200 mm Workpiece height: 500 mm Drilling diameter: 8 - 40 mm Number of drilling spindles: 3 pcs Spindle speed: 150 - 1,100 RPM Tool changer: 15 pcs Saw blade diameter: 1,430 mm Cutting speed: 8 - 30 m/min Total power requirement: 43 kW Machine weight approx.: 20 t Space requirement approx.: m Additional information Working range Angle steel: 80 × 65 × 10 mm to 250 × 250 × 28 mm U-steel: 80 × 45 mm to 400 × 110 mm Double-T beams: 80 × 46 mm to 600 × 220 mm Wide flange beams: 100 × 100 mm to 1,008 × 302 mm Special wide flange beams / welded T-beams: up to 1,200 × 500 mm Workpiece data Workpiece width max.: 1,200 mm Gbjdpfxsz Rnm Ne Al Ueu Workpiece height max.: 500 mm Drilling unit Number of drilling spindles: 3 (1 vertical, 2 horizontal) Drilling diameter: 8 - 40 mm Spindle speed: 150 - 1,100 RPM Drilling spindle feed: 0 - 500 mm/min Rapid traverse: 3,850 mm/min Rapid return: 8,000 mm/min Positioning speed: 15,000 mm/min Automatic tool changer: 15 tool positions (3 × 5) Clamping system Horizontal clamping force: 25,000 N Vertical clamping force: 4 × 10,000 N Sawing unit Saw blade diameter: 1,430 mm Saw blade type: HSS segmented saw blade Saw blade dimensions: 100 × 4 × 30 × 250 mm Cutting width: 9.5 mm Cutting speed: 8 - 30 m/min Saw feed: 0 - 400 mm/min Rapid return: 2,000 mm/min Drives Drilling drives: 3 × 11.0 kW Saw motor: 18.5 kW Positioning drives: 3 × 1.5 kW Hydraulic unit: 5.5 kW Hydraulic saw: 3.0 kW Vertical clamping cylinder: 1.5 kW Swiveling drive: 0.25 kW Hydraulic oil heater (option): 3.0 kW Total power Total connected power of the drilling unit: 43.0 kW Total installed power of the complete drilling and sawing unit: approx. 66 kW (incl. saw motor and auxiliary drives) Compressed air Compressed air connection: 6 - 8 bar Air consumption: 1,000 l/min Dimensions Drilling unit Dimensions (L × W × H): 6,650 × 1,300 × 3,730 mm Working height: 640 mm Weight: approx. 8,500 kg Saw Dimensions (L × W × H): 4,500 × 1,500 × 3,200 mm Working height: 640 mm Weight: approx. 10,980 kg Total weight approx. 19,500 kg (without accessories) Electrical data Operating voltage: 400 V / 50 Hz Control voltage: 24 V