Used Postforming for sale (48)

Condition: excellent (used), SINGLE-SIDE Sizing-Milling & Edge Banding Line PRE-FORMING (DIRECT POSTFORMING), composed of the following machines: A) Double station bridge loader "TREVISAN", with motorised roller conveyor B) Single-side Sizing & Edge Banding "HOMAG" Mod. Profi VFL79/3/P/A Preforming Edges (tape) thickness in rolls (min/max) max mm 0.35 (for U and L profiles) Panel thickness (min/max) mm 16 / 30 (optional mm 50) Working width (min/max) min mm 150 - Variable feeding speed (m/min) 10 - 32 Numerical control / PC 22 software / WoodCommander 01°) Horizontal milling unit (for top incision) Kw 2,2 02°) Hogging Unit (Kw 15) 0°-15° (for pre-hogging from above) 03°) Milling Shaping Unit Kw 6,6 (top rebate milling) with Hydro-clamp 04°) Milling Shaping Unit Kw 6,6 (bottom rebate milling) 0°-120° (with Hydro-clamp) 05°) Milling Shaping Unit Kw 0.7 (radius milling for profile finishing) 06°) Milling Shaping Unit Kw 1.85 (U profile milling) HSK25 07°) Milling Grooving unit UF 11 (Kw 4) for grooving or rebate milling 08°) Milling Shaping Unit Kw 2,2 (milling for chamfering and laminate overhang at top) 09°) Milling Shaping Unit Kw 2,2 (milling for the bottom bend groove) 10°) RIGHT SIDE: Milling Shaping Unit Kw 6,6 (grooving & rebate milling) panel width mm 160 - 1050 11°) RIGHT SIDE: Fine trimming unit (2 x Kw 1) for top and bottom edging and finishing (0°-25°) 12°) Cleaner / Blower (Kw 0,55) of postformed piece Codpfjnzhxqex Aftjpw 13°) Laminate overhang control (to detect laminate breakages) 14°) Glueing Unit (P.U.R) Glue (PU34+QA34) spray glue application (with nozzles) 15°) Pressure zone for "L" profile (VF Direct) for panels up to max. thickness 50 mm 16°) Pressure zone for "U" profile (for spacer profile R = 2.5 mm) 17°) Upper Circular Knife 18°) Fine Trimming Unit / Finishing Unit (2 x Kw 0.55) HSK25 (0°-30°) 19°) Oscillating upper cleaner (1 x Kw 0.25) C) Double station bridge unloader "TREVISAN", with motorised roller conveyor

Year of construction: 1988, condition: used, - working length max. (mm): 3100 Cpsdpfx Ajkx Hpaeftjw - profile height max. (mm): 200

Condition: like new (used), Year of construction: 2016, functionality: fully functional, SPECIFICATION • Steel construction • Rubber covered roller with spiral groove for guiding the sanding belt Pneumatic belt tensioning • Automatic belt oscillation • Belt centering device • Feed unit operated by pneumatic rollers controlled via an inverter • Pneumatic cylinder with balanced adjustment for even pressure TECHNICAL DATA • Sanding belt motor: 5.5 kW • Feed unit motor: 0.25 kW • Minimum curve radius: 350 mm • Performance 300 pcs/hour • Machine dimensions: 850 x 1500 x 1700 (h) mm Cpodpsw D Dqusfx Aftjw • Machine weight: 450 kg According to CE rules In compliance with CE safety rules

Condition: good (used), Code: 0177 Brand: NARDELLO - ITALY Model: SOTOS - CE Standard Cross cutting panel saw for postforming tops, edged and non-edged panels. Suitable for companies producing furniture, kitchens, bathroom furniture, furnishings, panels, and various - CE Standard Blade carriage unit: The blade carriage slides on linear guides with spheres blow-by and it is controlled by a brushless motor. Scoring unit group, whih is controlled by a brushless motor, allows to cut postformed edges and also special workings, which increase productivity of the machine. Pliers group and/or rear positioner are controlled by brushless motor and slide on linear guides with spheres blow-by. Cpedpfxew Dfnhs Aftsw Cycles check-out is made by Numerical Control. Technical characteristics: Cutting width 1500 mm Cutting height 100 mm Main blade motor 7,5 Hp (5,5 Kw) Rotating speed 4000 Main blade diameter 300-400 mm Scoring blade motor 2,5 Hp (1.8 Kw) Scoring unit rotating speed 5000 rpm Scoring unit blade diameter 220-300 mm Saw carriage forward speed 0-60 m/1' Saw carriage return speed 40-70 m/1' Positioner speed 0-25 m/1' Positioner return speed 40-60 m/1' Weight 2000 kg

Condition: used, Holz Her Sprint 1329 Power Heavy-duty design – edge thickness 0.4 – 8 mm (15 mm with tool change) 21.5" PPC 332 touchscreen control fa.s.t. setting technology “Set-up on the fly” Motorized, CNC-controlled bridge height adjustment Fully automatic edge magazine for roll and strip material (MOT) Pre-milling unit for jointing before the gluing station GLU-JET glue application station – for cartridge, granulate & PU adhesive, thin film technology Maximum edge height: 60 mm Adjustable glue height / sensing nozzle Pressure unit 1913, motor-driven and pneumatic NC servo axis End trimming unit for roll and strip material up to 15 mm edge thickness With electro-pneumatic adjustment of the end saw angle from 0-10° MOT6 multi-function milling unit – 6 NC-controlled axes: Flush trimming 8 mm (15 mm) Radius milling Bevel milling 0–15° pneumatically MOT4 copying milling unit – 4 NC axes, corner copying, postforming corners: for machining the upper and lower longitudinal edge, and copying the front and rear vertical edges; working height 60 mm, includes shelf program MOT4 scraper unit Flat scraper unit – finish with pre- and post-sensing Buffing unit for final cleaning and edge polishing with 2 textile discs, tiltable by 5° Spray units for entry and exit section as well as antistatic agent at the pressure unit Entry section: electronically controlled separating agent spraying system Pressure unit: electronically controlled antistatic spraying system Codpfxoyi Algj Aftepw Exit section: electronically controlled cleaning agent spraying system with detergent Air cushion table at feeding side / L = 1800 mm, W = 600 mm First delivery in 2022 Machine is WORKSHOP TESTED and in TOP CONDITION Available ex stock Lieboch

Condition: used, Holz Her Auriga 1308 XL Compact design – Edge thickness 0.4 - 8 mm Cpsdpfx Afjyh Ilyjtow SPS screen control Edge-Control, PPC 319W, 18.5" touchscreen monitor iTronic adaptive pressure and glue quantity control with flushing routine Pre-milling unit for jointing before gluing Fully automatic edge magazine for coil and strip material Glue application station GLU JET cartridges + PU gluing, with tracing nozzle Workpiece height 8-60 mm High gloss package Pneumatic pressure unit Pneumatic end trimming unit for coil and strip material up to 8 mm edge thickness, with pneumatic swivel from 0-10° angle of the end trimming saws Multifunctional milling unit 1827 MOT4 for flush trimming up to 8 mm, radius milling and 15° chamfer milling via NC axes Corner rounding unit – rounding corners up to 3 mm edge thickness, working height 12–60 mm, postforming possible Scraper unit 1929 MOT4, for chamfers and radii with 2 scraper holders via NC axes Surface scraper unit FK701 with pre- and post-sensing – finish Buffing unit – polishing Spraying device at infeed and outfeed Spraying unit with lubricant for high-gloss edges Complete DIA tool set included First delivery in 2021 Machine is in TOP CONDITION from business closure – small company Available from stock in Lieboch

Condition: used, Holz Her Sprint 1317-1 FÜ + PU heavy-duty design – edge thickness 0.4 – 5 mm Cpodpfjyfn Urox Aftow SPS screen control large LCD display pre-milling unit before gluing area fully automatic edge magazine for coil and strip material glue application station for cartridges + PU gluing maximum edge height 51 mm automatic glue height adjustment press unit 1913, motorized pneumatic trimming unit for coils and strips with pneumatic adjustment for miter saw angle from 0–10° multifunctional milling unit 1942 MOT 2 milling unit with motorized adjustment axes for various radii – chamfering – flush milling via SPS copy milling unit 1832 for corner copying up to R 3 mm + postforming up to R 6 mm scraping unit for chamfers and radii pneumatic infeed and outfeed finish – surface scraper regular maintenance by Holz Her machine is FACTORY SERVICED, in EXCELLENT CONDITION available from stock in Lieboch

Condition: used, Year of construction: 2003, Used machine Year of manufacture: 2003 Features and technical data: - Control system with LCD display - Swiveling operator panel - Program memory - Manual pressure bridge adjustment - Feed via transport chain - Extendable workpiece support Jointing unit 1961: - 2 x 2.0 kW - Diamond jointing cutters for up-cut and down-cut operation Edge magazine 1903: - Support plate 820 mm, max. loading capacity 40 mm - Automatic feeding of coil and strip material Adhesive application system 1906: - Cartridge system with sensor-controlled nozzle - Automatic reloading - Use of PUR adhesives possible Pressure unit 1816: - With powered roller - Pneumatic control of the pressure unit End trimming unit 1918: - 2 x 0.22 kW - Swivels from 0 to 10°, pneumatically adjustable Milling unit 1942 MOT 2: - For flush, radius, and chamfer milling - Motorized adjustment - Air nozzle at milling unit Corner copying unit 1832: - Corner copying up to r = 3 mm, postforming up to r = 6 mm Radius scraper unit 1929 MOT 2: - For plastic edging up to 3 mm - Chip collection box for radius scraper Surface scraper 1964: Cpodpfxowka Nye Aftew - Process-controlled surface scraper - Air nozzle at surface scraper Buffing unit 1940 Edge thickness, coil material: 3 mm Edge thickness, strip material: 5 mm Max. edge thickness, corner copying: 3 mm Workpiece thickness: 6-45 mm Workpiece thickness, corner copying: 45 mm Min. workpiece length: 180 mm Feed speed: 8 m/min Distance, workpiece support: 470 mm Support plate diameter for edge material: 800 mm End trimming blade for coil material up to: 3 mm Heating up time: 3.5 min Jointing cutter power: 2 x 2 kW End saw power: 2 x 0.22 kW Milling station power: 2 x 0.6 kW Corner copying power: 0.22 kW Extraction nozzle jointing unit: 120 mm Extraction nozzle milling unit: 70 mm Extraction nozzle scraper unit: 70 mm Dimensions: 5,350 x 1,669 x 1,940 mm Weight: 1,200 kg Location: Röllbach Availability: short notice

Condition: used, functionality: fully functional, SECOND-HAND ORBITAL SANDER CAMAM MOD. LEC200/AV Codpfx Ajx Rn Tgoftopw - With feeding units - Min/max diam. 10/100mm - Motor 5.5hp - Volt. 380v/50hz

Condition: used, functionality: fully functional, input voltage: 380 V, SECOND-HAND ORBITAL SANDER CAMAM MOD. LEC200/AV - With feeding units - Min/max diam. 10/100mm - Motor 5.5hp - Volt. 380v/50hz Cpjdjx Rn Taopfx Aftew

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: AA0985, input voltage: 400 V, SECOND-HAND TOP AND BOTTOM WIDE BELT SANDER SAC MOD. 4R 300 - CE RULES - Working width mm. 300 - Max. working height mm. 150 - Min. height mm. 5 - Min. piece lenght mm. 240 mm. - N. 2 top rollers -. diam. 254 mm. - N. 1 top brush - N. 2 bottom rollers - diam. 254 mm. - N. 1 bottom brush - Feeding speed 4-16 m/min. - N. 4 motors kw 4 each Cedpfxex Riccj Aftopw - Volt 400/50 - S/N AA0985 - Year 2001

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: SA/005623, working width: 1,100 mm, SECOND-HAND WIDE BELT SANDER DMC MOD. TECHNOSAND TCK-1100 M3 - CE RULES - Working width mm. 1100 - 1st unit roller 18.5 kw 90 sh diam. 250 mm. - 2nd unit roller 15 kw 70 sh diam. 250 mm. - 3rd unit roller 11 kw 40 sh diam. 330 mm. Codox Rh Drspfx Aftepw - N. 3 independent motors - Touchscreen display - Short pieces device - S/N SA/005623 - Year 2007

Condition: used, Year of construction: 2006, functionality: fully functional, SECOND-HAND ORBITAL SANDER COMEC MOD. LC20AV - CE RULES - Adjustable feeding speed - Min/max. working diam. 30/150 mm. - Min. bending radius 200 mm. - Complete with feeding units Cedjx Rh Azjpfx Aftopw - Year 2006

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, cutting height (max.): 90 mm, cutting width (max.): 3,800 mm, saw blade diameter: 380 mm, overall weight: 4,400 kg, cutting length (max.): 3,800 mm, main saw diameter: 380 mm, Beamsaw SIGMA IMPACT 90 (SCM Group) suitable for furniture panels precize cutting by one or more panels overlapped. Manufacturer: SCM Group Model: Sigma Impact 90 Production year: 2017 Cutting width: 3.800 mm Cutting depth: 3.200 mm Max. cutting height: 90 mm Front tables (air cushion): 1x 2.500x600mm, 3x 2.500x600mm Machine basement with air-cushion. Max. main blade diameter: 380 mm Scorer diameter: max. 300 mm PUSHER: brushless motor, max. speed 120 m/min ! SAW CARRIAGE: brushless motor, max. speed 150 m/min ! THK linear guides for the saw carriage movement. THK linear guides for the PUSHER movement. Automatic centralized lubrication of THK linear guides. Hi-Tronic kit: Csdox Nc Ayopfx Aftopw - main motor 15 kW (mode S6) - vertical movement of main and scoring blade by price ball-screws - optimized stroke of the main blade - electronic scorer adjustment in 2 axis (vertical, horizontal) - grooving with the main blade (electronic depth adjustment) - postforming cuts - window cut outs (blind cuts) - AKE flange for main and scoring blade Quantity of clamps (grippers): 10 pcs (maximum) Automatic exclusion of the clamp acting on the panels edge (up to 800 mm width). Start/stop pedal. Label printer. Control SW: WINCUT Optimalisation program: OTTIMO PERFECT CUT TOP (1x HW key) Control PC Eye-S: Windows + LCD touch screen 21" Air conditioning device for the electric box. Panel´s dimension automatic measuring. Laser line for the visualisation of the cutting line. Automatic double side aligner - motorized (60-2.200 mm). Machine stat: fully working Possibility to see in actuall production. Availability: cca April 2026

Condition: ready for operation (used), Technical characteristics Cast-iron frame Useful width : 630 mm Useful height : 300 mm 7.5 kW motor Electric up/down and fine adjustment Digital display 1200mm long table with backlash adjustment / 4 columns Sectioned drive at infeed Csdpfjtxk Syex Aftopw 2 rubber rollers at output Variable feed 6 to 20 m/min Power and Motors Voltage: 380 V Pluging: Three-phased Power: 8 Kw Motor: 10 CV Overall dimensions

Condition: ready for operation (used), Technical characteristics En cours de vérification One-piece cast-iron frame Useful width : 505 mm Useful height : 3 to 300 mm Max. infeed : 10 mm Shaft Ø 120 mm, 4 irons Rotation 5000 RPM 7.5 kW motor Electric up/down and manual fine adjustment Feeding speeds : 8, 11, 15 and 19 m/min 1200 mm table length Roller drive Ø 180 mm suction output Power and Motors Voltage: 380 V Pluging: Three-phased Power: 7,5 Kw Cpjdpfx Afjty Hmcjtjw Motor: 10 CV Overall dimensions Lenght: 1200 mm Width: 1050 mm Height: 1170 mm Weight: 900 Kg

Condition: ready for operation (used), Technical characteristics Usable width : 550 mm Asymmetrical table length : 2800 mm 4-iron shaft Ø 120 mm Cast-iron fence, length 1200 mm Cedpoub Eufefx Aftjpw 4 kW motor Ø 120 mm suction port Heavy machine Power and Motors Voltage: 380 V Pluging: Three-phased Power: 4 Kw Motor: 5 CV Overall dimensions

Condition: ready for operation (used), Technical characteristics One-piece cast-iron frame Useful width: 630 mm Usable height: 3.5 to 300 mm Minimum machining length: 260 mm Csdpfx Ajtzth Isftopw 7 kW (9.5 hp) motor 4-iron spindle Shaft diameter : 120 mm Electric lift/lower Digital height display Cast-iron table : 640 x 1000 mm Supported by 4 columns Driven by steel and rubber rollers Feeding speeds : 5; 8; 12 and 16 m/min Power and Motors Voltage: 380 V Pluging: Three-phased Power: 11 Kw Motor: 9,5 CV Overall dimensions Weight: 785 Kg

Condition: ready for operation (used), Technical characteristics Cast-iron frame Useful width : 630 mm Useful height : 300 mm 7.5 kW motor Electric lift/lower and fine adjustment Digital height display 1200 mm table length (2000 mm with extension) Backlash compensation / 4 columns Sectioned drive at infeed 2 rubber rollers at output Variable feed rate 6 to 20 m/min Cjdpfxjtxk Sto Aftepw Power and Motors Voltage: 380 V Pluging: Three-phased Power: 10 Kw Motor: 10 CV Overall dimensions

Condition: ready for operation (used), Technical characteristics Table width : 550 mm Asymmetrical table length : 2700 mm 4-iron shaft Ø 120 mm Cast-iron fence, tilting from 90° to 45°, length 1200 mm 4 kW motor Ø 120 mm suction port Heavy machine Power and Motors Voltage: 380 V Pluging: Three-phased Power: 3 Kw Motor: 4 CV Overall dimensions Cedpfx Ajub Et Ioftepw

Condition: ready for operation (used), Technical characteristics En cours de vérification Usable width : 410 mm Asymmetrical table length : 2500 mm Cpsdpeub Et Ujfx Aftow 4 iron shaft Ø 120 mm Rotation speed : 5000 RPM Tiltable cast-iron fence, length 1100 mm, height 160 mm 4 kW (5.5 HP) motor Suction outlet Ø 150 mm One-piece cast-iron frame Power and Motors Voltage: 380 V Pluging: Three-phased Power: 4 Kw Motor: 5,5 CV Overall dimensions Lenght: 2500 mm Width: 780 mm Height: 1000 mm Weight: 750 Kg

Condition: ready for operation (used), Technical characteristics One-piece cast-iron frame Useful width : 630 mm Useful height : 300 mm 5.5 kW (7.5 hp) motor 4-iron TERSA diameter shaft Cpjdpfetxk Saex Aftjw Shaft diameter : 125 mm Electric raising/lowering and fine adjustment Digital height display Cast-iron table : 630 x 1200 mm Backlash compensation / 4 columns Notched steel roller drive at infeed 2 output rollers (1 steel smooth + 1 rubber) Variable feed 6 to 20 m/min Power and Motors Voltage: 380 V Pluging: Three-phased Power: 10 Kw Motor: 7,5 CV Overall dimensions

Condition: ready for operation (used), Technical characteristics Cast-iron frame Useful width : 630 mm Useful height : 230 mm 4 iron shafts, 120 mm diameter 5.5 kW motor Manual raising/lowering and fine adjustment 800 mm table length (1500 mm with extension) Sectioned drive at infeed (toothed roller) 2 smooth rollers at output Solid machine, ideal for wood frame work Power and Motors Voltage: 380 V Cpedpfxstxk Smo Aftjw Pluging: Three-phased Power: 5,5 Kw Motor: 7,5 CV Overall dimensions

Condition: ready for operation (used), Technical characteristics Table width : 550 mm Asymmetrical table length : 2700 mm 4-iron shaft Ø 120 mm Cast-iron fence, tilting from 90° to 45°, length 1200 mm Cpedpfx Afjub Euletow 4 kW motor Ø 120 mm suction port Heavy machine Power and Motors Voltage: 380 V Pluging: Three-phased Power: 5 Kw Motor: 5,5 CV Overall dimensions

Condition: new, Year of construction: 2021, Exhibition machine Year of manufacture 2021 (table machine) For stationary form milling of head edges on soft and postforming workpieces. As well as for Eraser milling on thick PVC edges on rectangular workpieces and multi-sided gluing. The machining of symmetrical and asymmetrical soft- and postforming profiles is possible after manual profile depth adjustment. Motor guidance is manual by scanning on the workpiece. Basic equipment: - Workpiece stop system - pneumatic clamping cylinder - 1 milling motor 0,8 kW infinitely variable up to 27000 rpm standard with radius milling cutter R=3 equipped. The scanning is done by a starting ring on the workpiece. - Aggregate guidance on precision round guides. Technical data: Workpiece thickness: max. 55 mm Workpiece width: min. 80 mm Workpiece length: min. 110 mm Softforming profile depth: max. 50 mm Edge thickness: max. 4 mm (depending on edge material) Milling tool: Radius milling cutter R 3 Electrical connection: 230V / 50Hz / 1Ph total connection: 0,8 kW pneumatic connection: 6 bar space requirement: approx. 740 x 460 x 500 mm Cpjdekwhapjpfx Aftjw net weight: approx. 45 kg Availability: short term Storage location: Solingen