ROUND END TENONER

BACCI TSG2T

Condition: excellent (used), functionality: fully functional, Bacci TSG 2T edge-banding machine Spindle speed: 6000 rpm Maximum edge thickness: 115 mm + 2R Edge thickness: 10 – 45 mm Table tilting angle (upwards): 0° – 15° Table tilting angle (downwards): 0° – 30° Table side tilting angle: 0° – 20° Machine weight: 1050 kg Codpfxoy Uc Rue Ag Sjrd Machine dimensions: 1500 x 1150 x 1350 mm

Condition: excellent (used), functionality: limited functionality, Year of construction: 2000, For sale: High-quality Liebherr concrete mixing plant in excellent condition – including BIBKO wastewater treatment system A used, excellently maintained concrete mixing plant from the renowned manufacturer Liebherr is for sale. The plant impresses with its low operating hours, complete technical documentation, and original delivery condition – all components come from the manufacturer itself. Csdewlwruepfx Ag Sjrd Important addition Also included in the offer is a wastewater treatment system from BIBKO Umwelttechnik & Beratung GmbH. This allows for environmentally friendly and economical reuse of residual and wash water, which not only reduces operating costs but also meets the ecological requirements of modern production processes. Main technical data Type: Ringtellermischer R 1.0 Practical mixing capacity: 1.0 m³ solid concrete per batch Efficient filling: A 6m³ truck mixer is filled in only 6 batches Theoretical mixing capacity: 50 m³/h Practical mixing capacity: 40 m³/h Aggregate storage Star storage: 1,200 m³ total capacity Active storage: 65 m³ Number of aggregate components: 5 Cement silos 2× cement silo at 40 t each with overfill protection 1× two-piece cement silo at 80 t with overfill protection Condition of the plant Commissioning: 2000 Out of operation: since 2006 Operating hours: approx. 3,500 (estimated) Condition: Very good – minimal use, excellently maintained Previous owner: First owner Originality: All components original from Liebherr Documentation: Fully available (electrical diagrams, foundation plans, structural analysis, etc.) The solid and well-thought-out construction of the plant enables easy disassembly and reassembly thanks to the predominantly bolted design. The control cabinets are connected to each other via plug connections – for details, please refer to the attached PDF documents. Additional service upon request: We are happy to support you in realizing your project with experienced partner companies for: Dismantling and reassembly Electrical commissioning (industrial electronics technician) Organization of transport with reliable forwarding agents This way, your new plant can be quickly and professionally put into operation at a new location. Interested? We look forward to your inquiry and are always available to answer any questions you may have!

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 4,600 mm, travel distance Y-axis: 1,935 mm, travel distance Z-axis: 275 mm, number of axes: 5, This 5-axis Biesse Rover C9.50 was manufactured in 2007. It features a large working area (X=4600 mm, Y=1935 mm, Z=275 mm), an automatic lubrication system, and a control unit for 5-axis interpolation. The machine includes a vacuum system, a conveyor belt for chip removal, and a liquid cooling unit. If you are looking to get high-quality CNC machining capabilities, consider the Biesse Rover C9.50 machine we have for sale. Contact us for more information. Worktable and clamping • 8 ATS plate holders (L = 1525 mm) and 24 slide rails • Automatic positioning of plate holders and slide rails (EPS X-Y) • Pneumatic locking system, divided into 2 working areas in X • 8 rear reference stops, stroke 115 mm • 8 stops, stroke 140 mm, positioned at 1175 mm (L = 1280 / 1525 / 1800 mm) • 8 stops, stroke 140 mm, positioned at 770 mm (L = 1280 / 1525 / 1800 mm) • 4 side stops, stroke 140 mm (2 left + 2 right), with pneumatic system • 4 removable center stops, stroke 140 mm (2 left + 2 right), with pneumatic system • Sensor for detecting lowered stops • Pneumatic system for lifting bar holders • 6 lifting bar holders for easy loading (H = 74 mm modules)Vacuum • Vacuum system for a 250 m3/h pump • 250 m3/h rotary vane vacuum pump for standard vacuum systemMachining units and configuration • Composition C3-A1: • Device for mounting chip deflectors with pneumatic or inductive sensors on a 5-axis machining unit Crjdsx D H Hcspfx Ag Ssd • Flange for mounting units on a work unit with 5 interpolating axes (units usable only when the electric spindle is vertical) • Composition C3-P2: • Additional Z slide for rear work units, controlled by an independent Z axis • 16 vertical and 4 horizontal boring spindles in Y-direction • Chain tool changer with 22 positions (180 mm center distance) • Iron gripper for chip deflector with pneumatic or inductive sensor, positioned in the chain tool changer • RH chip deflector with inductive sensor for standard electric spindle or 15 kW 5-axis electric spindle (requires device for chip deflector; requires flange for mounting units when using a 5-axis electric spindle; requires C-axis when using a standard electric spindle)Systems • Automatic lubrication system • Control unit with 5 interpolating axes Additional equipment • additional refurbished 5-axe main spindel available • Conveyor belt for removing chips and scrap pieces (chip conveyor) • Liquid cooling unit for liquid-cooled systems (can cool two electric spindles, or one electric spindle plus one liquid-cooled drilling head)Note: The technical data and descriptions are taken from the original order confirmation and are for information only; they are not binding.

Condition: excellent (used), SCM T150 Spindle Moulder Spindle diameter: 35 mm Total spindle length: 180 mm Electric spindle lift Electric fence movement Electrically adjustable tilt angle -10/45° Codpfjw Ral Hox Ag Sjrd Variable spindle speed: 3000-4500-6000–7000-10000 rpm Motor power: 5.5 kW DTR technical documentation

Condition: new, Year of construction: 2026, The manufacture of modern folding machines is our passion, which we would like to share with you. At trade fairs, we share our experience and attention to our bending machines, thanks to which we can continue to improve our folding benches, so we don't forget who we really work for. The quality of our bending machines is very important to us. Bending machine ZGR-2140 / 1.2 Warranty: 12 months. Certificate CE Eccentric pressure that is shifted to both sides of the machine Working length: 2140mm Cjdpfob Na Eqjx Ag Serd STEEL SHEET 1.2 mm Non-ferrous metals 30% more sheet thickness Folding beam: 24 mm Bending angle: 145 degrees Cutting along the entire working length, Lifting the upper cheek in three positions, maximum clear width between the side panels 80 mm rear frame for holding sheet metal, front cutter limiter to ensure the specified cutting width, We are looking forward to your contact!

Condition: used, mileage: 930,000 km, power: 353 kW (479.95 HP), first registration: 02/2012, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: blue, gearing type: automatic, emission class: euro5, loading space length: 4,900 mm, loading space width: 2,420 mm, loading space height: 900 mm, Equipment: air conditioning, * MAN TGS 26.480 three-way tipper * First registration: 2012 * 930,000 km * Euro 5 * Automatic transmission * Leaf-air suspension * 6x4 axle drive * Tow bar with hydraulics * Automatic climate control Crodpfx Aoyq A Hgeg Sjd * Unladen weight: 11,460 kg * Wheelbase: 3.30 m * Body dimensions: 4.90x2.42x0.90 m

Condition: as good as new (ex-display), Number of spindles 6 St. Working width 250 mm Working height 150 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 6-24 m/min. weight 4770 kg Dimensions (L/W/H) 4722x1860x1776 mm Credpfx Ajvnv Ubeg Sed Vierseitenhobelmaschine Kuper SWT XL-6 in Fenster-Version mit elektronischer Axial- und Radialverstellung der Spindeln. Schwerer Maschinenständer, verwindungsfrei und schwingungsarm. Anzahl der Spindeln: 6 Arbeitsbreite: 250 mm Arbeitshöhe: 150 mm Abrichttischlänge: 2500 mm Spindeldrehzahl: frequenzgeregelt 4.000 - 8.000 U/min Vorschubgeschwindigkeit: 6-24 m/min Ausführliche Beschreibung finden Sie in nebenstehender PDF-Datei! (Technische Angaben laut Hersteller - ohne Gewähr!)

Condition: used, CNC machining center BIESSE Rover C 6.50 CONF.2, year 2007 Working area: approx. 140 × 460 cm Machine dimensions: 300 × 650 cm Weight: approx. 6,100 kg Two working heads Tool magazine: 22 positions Vertical drilling spindles: 28 pcs Crodpew Rpd Sjfx Ag Sjd Horizontal drilling spindles: 12 pcs Price negotiable, available immediately. Price is without VAT.

Year of construction: 1995, condition: not inspected (used), Connected load 380V 55A PMS control Pre-milling unit 1961 Credpfxenxkm Eo Ag Sed Magazine 1901 Glue station 1906 Printing unit 1926K Snipping unit 1916 Flush trimming unit 1962 Profile trimming unit 1966, 3 mm rounding up to 15 mm flush Rounding scraper 1927 Shaping trimming unit 1983 Buffing unit 1941 Extraction 1x160 1x125 mm Compressed air connection 6 bar

Condition: new, Year of construction: 2025, input voltage: 400 V, Spot welding machine / table-top spot welding machine - current model, manufactured in 2025 - new machine Control unit TE 101 with digital display of the welding current Rated power 20 kVA / 50% duty cycle Mains connection 400 V Short-circuit current 19 kA Welding current 15.2 kA Fuse rating 63 A Supply cable / phase 25 sq mm Electrode force 187 daN at 6 bar Overhang 160 mm Electrode cone MK1 Weight 81 kg - 2-stage foot switch - Main switch - Pneumatic maintenance unit with filter - Machine is our demonstration model - Machine can be demonstrated in Dresden by prior arrangement and appointment Cjdpfoh Nu A Nsx Ag Serd