Used Edger Optimizer for sale (3,200)

Year of construction: 2001, condition: good (used), Paris/CATECH side board edger. Year of production 2001 Capacity: about 30 boards/min. Fedjrtn Nzjpfx Ah Usgi In 2021 the machine underwent a major modernization, including replacement of servo valves, new control and measurement by MADREW. A new plank measuring system was rebuilt based on existing measuring sensors. The machine was dismantled in March 2024 due to replacement with a new more efficient edger manufactured by MADREW The range includes: board separator, measuring feeder, edger, distribution conveyor, electrical and control cabinets, hydraulic power unit.

Condition: used, WD Edger: Fsdpfx Aexuipboh Uegi - Motor power 55 kW - Two movable sleeves - Sleeve length 60 mm - Max saw blade diameter 400 mm - Hydraulic saw blade spacing - Four lower feed rollers - Two upper feed rollers Centering roller table: - Total length 7000 mm - Total width 160 mm - Five lower feed rollers - Roller diameter 160 mm - Length 1000 mm - Four upper hydraulic hold-downs - Six centering material clamps - Hydraulic feed

Condition: good (used), Original spacer rings PAUL in various widths for edging saw KME 2 or BM, outside-Ø 120 mm, bore-Ø 75 mm, with 2 keyways Fgsdpfxoiimz Ao Ah Usi

Condition: used, CATALOG NUMBER 7522 Technical data: - max cutting length: 3100 mm - max cutting thickness: 100 mm - max cutting width: 640 mm - distance stop - main saw motor power: 11 kW - feed motors power: approx. 2×2.2 kW - feed speed (stepless gearbox): 10-50 m/min - pressure beam - blade diameter: 450 mm - working table height: 860 mm - working table width: 650 mm - extraction nozzle diameter: 3x180 mm - overall dimensions (L/W/H): 5600x2200x1800 mm - weight: approx. 3000 kg ADVANTAGES – Belgian-made M.D’Hulster – For board edging – DTR documentation – used saw, in very good condition Fjdpfx Ahsvm Ai Aj Uegi Net price: 32,900 PLN Net price: 7,830 EUR (depending on exchange rate 4.2 PLN/EUR) (Prices may change with currency fluctuations)

Condition: new, The AE-400 SERVO edger is designed for longitudinal trimming and slitting of side boards fed to the machine at high speeds (100-400m/minute). The machine works directly with conveyors feeding and receiving boards in automatic mode. The machine is equipped with a board scanner from above and below. The maximum instantaneous efficiency of the edger up to 55 boards/min can be obtained by cutting a 2.5 m board to the same width without changing the spacing of the saw blades. Each adjustment of the edger node devices to the width of the board causes a change in performance. The average productivity of the machine, depending on the work configuration, ranges from 35-48 boards/min. technical dance No. Parameter Value 1. Saw spindle drive motor power. 55 kW 2. The number of revolutions of the saw spindle. 3550 rpm 3. Diameters of used saws. 400mm 4. Maximum cutting height. 50mm 5. Number of saw blades used. 2 to 3 pcs. (2 floating saws) 6. Minimum board length. 2000mm 7. Maximum raw material length. 6200mm 8. Maximum number of boards after cutting 1 board: 2 pcs. 9. Feed: 100- 400m/min Cutting for 1 board - with two saws (2 floating saws): 1. Minimum saw spacing (board width after cutting) 75 mm Fgjdpjnygvrofx Ah Uei 2. Maximum spacing of extreme saw blades (board width after cutting) 300 mm Cutting into 2 boards - with three saws (2 floating saws), 1. Spacing the saws on the fixed coupler (board width after cutting) 50-100mm 2. Spacing between floating saws (board width after cutting) 50-100mm 3. Cutting into 2 boards minimum 2 x 50mm 4. Cutting into 2 boards maximum 2 x 100mm Other machine configurations are possible on request. We also produce other sawmill lines: log sorting plants, board sorting plants, board stackers, conveyors.

Condition: good (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 050702, JRIMAC FUTURA TOP Edger Cutting length: 7 m Power: 22 kW Blade: 550/450 mm Control panel Fsdpfx Ahjxl Rr Se Uegi

Year of construction: 1997, condition: excellent (used), main engine 11 kW disc diameter max. 500mm cutting height max. 160mm cutting width 5 - 160 mm ruler with guide rollers feed speed adjustable on a gear motor machine dimensions (length/width/height) 170 x 130 x 130 cm weight ~ 500 kg Fodpfji Dbvmex Ah Usgi

Condition: used, Edger Saw Weight: 3000 kg, Max cutting height: 800 mm, Max width: 600 mm, Minimal distance between saw blades 55/28, Max 4 sawblades, Sawing speed 0-50 m/min, Fgjdsv Ni Eiepfx Ah Uei

Condition: like new (used), ffor PAUL KME 2 or BM edger and multirip saw, overall length 420 mm, 160 mm or 105 mm, clamping length 375 mm, 110 mm or 55 mm, bore Ø 60 mm, outer Ø 75 mm, flange Ø 120 mm, 2 external wedges, saw bushes with left-hand thread or right-hand thread available Fgjdpspky Aaefx Ah Uji

Condition: excellent (used), CATALOG NUMBER 7044 TECHNICAL SPECIFICATIONS - Circular saw blade diameter: 250 mm - Blade bore diameter: 30 mm - Number of saw blades: 2 pcs - Minimum cutting width: 30 mm - Maximum cutting width: 150 mm - Maximum cutting height: 35 mm - Minimum workpiece length: 620 mm - 4 upper slip rollers - Upper rollers serve as material hold-down - Bottom feed chain - At the outlet: 1 upper and 1 lower metal slip roller - Stepless feed speed adjustment - Feed motor: 0.75 kW - Main motor: 4 kW - Extraction port diameter: 130 mm - Infeed table dimensions (L/W): 1550x350 mm - Total discharge tray dimensions (L/W/H): 3150x700x870 mm - Overall machine dimensions (L/W/H): 2150x950x2050 mm - Total weight: 350 kg – Very good condition, – Used saw Net price: 7,900 PLN Fsdpfx Ahsmih Sfs Uegi Net price: 1,880 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant currency fluctuations, the price may change)

Year of construction: 1990, condition: excellent (used), A KT-53 Board Edger that is rebuilt to a KT-52 Fsdpfohuiwujx Ah Uegi

Condition: used, functionality: fully functional, We have a used Ahlström edger available for sale. It is in full working condition and comes complete with a set of blades/cutters. Fodexa Akpepfx Ah Usgi

Condition: excellent (used), Max material height 120 mm Max material width 700 mm 22 kW motor Two floating saws Hydraulic roller feed, steplessly adjustable Fjdpfx Ahjxciypj Usgi

Condition: used, functionality: fully functional, Year of construction: 2015, - Made in Poland - Year of manufacture: 2015 Fodow H Rdaepfx Ah Ujgi - DTR, CE - Electric saw blade spacing adjustment TECHNICAL SPECIFICATIONS: - Cutting height: 60 mm - Saw blade diameter: 250 - 350 mm - Number of saw blades: 2 pcs - Max. cutting width: 700 mm - Min. cutting width: 90 mm - Max. blade spacing: 460 mm - Feed speed adjustable via inverter - Feed speed range: 0 - 40 m/min - Main motor power: 2 x 4.7 kW - Feed motor power: 0.75 kW - Blade spacing motor power: 0.12 kW - Total power requirement: 11.5 kW - Roller table length: 2 x 240 cm - Roller table width: 460 mm - Extraction port diameter: 160 mm - Transport dimensions (L/W/H): 200 / 200 / 140 cm - Weight ~ 1000 kg

Condition: ready for operation (used), Slab recovery line with below machines: One 2-blade board edger Fodpfxogwqk So Ah Uogi One single blade horisontal resaw Conveyors system between the machines included.

Condition: used, Dimensions (mm³): 670x80x100 Weight: 4,7 kg Image acquisition time: 100 msec. Measuring field size: 220x300 mm² Data interface: GigE Resolution CCD camera: 1200x1600 px 3d error resolution limit (depth): 100 µm (min.) surface dependent Fgsdpfx Aok E Nadsh Uji Lateral error resolution: 1.5 mm surface dependent Working distance: 432 mm +/- 20 mm Light source: BLUE-LED

Condition: used, functionality: fully functional, Year of construction: 2023, In this offer you purchase a used automatic edger ‘Nidek Lexce Trend/DB Patternless Edger’ Object of sale: 1 x Nidek Lexce Trend /DB EAN: 2008783216791 with the following equipment: incl. built-in tracer EAN: 2008783216838 Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The device has been tested for function Packaging and dispatch: Fgodpfevtbczsx Ah Usi You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! For further information you can of course also contact us personally.

Year of construction: 2005, condition: excellent (used), Weinig Dimter OptiCut S 90 optimizer with 2 ejectors – after technical review – German production – year of manufacture 2005 TECHNICAL PARAMETERS: max. length of cut material 4500 mm max. width 360mm max. height 160mm automatic length measurement Fjdpei Apgmjfx Ah Ujgi optimization in 4 quality classes total power 13 kW blade motor power 7. 5 kW pneumatic side and top pressure disc diameter max. 500mm OptiCom Assist control receiving conveyor 5600 mm two ejectors total length 13 m component marking printer cutting accuracy +/- 0.5 mm transport dimensions (length / width / height) 600 / 240 / 190 cm weight ~ 1800 kg

Condition: excellent (used), Raimann KS 310 BV edger multisaw - year of manufacture 1995 - German production - DTR - two movable discs TECHNICAL PARAMETERS: - track width 340 mm - cutting height max 120 mm - engine power 30 kW - disc diameters 250/360 mm - Possibility to put on a shoe - electric height adjustment - feed continuously adjustable 11-38 m / min Fgjdoir Eubjpfx Ah Uoi - power of the feed motor 1.5 kW - two movable discs - three lasers - max element width 1000 mm - minimum element length 600 mm with a shoe 400 mm - four upper pressure rollers - spindle diameter 65 mm - sleeve diameter 80 mm - spigot diameter 250 mm Dimensions 230x220x230 weight 2500 kg

Condition: excellent (used), Storti RM 500 edger - Italian production Fgodok Talpjpfx Ah Uji - year of production 1993 - electric spacing of discs TECHNICAL PARAMETERS: - cutting width max 435 mm - cutting height max 170 mm - engine power 2 x 22kW - max element width 600 mm - minimum material length 800 mm - max disc diameter 600 mm - spindle diameter 40 mm - two upper pulling rollers - one upper pressure roller - roller motor power 2 x 1.1 kW - roller pressure with automatic jump - seven bottom pulling toothed rollers - electric disc adjustment - two lasers - feed speed 25 and 50 m/min - feeding table 2950 mm - receiving table 3000 mm - drive rollers D100 mm - power of the roller feed motor 2 x 1.5 kW Transport dimensions 500x240x180 cm weight 3500 kg

Condition: excellent (used), Edging line edger with optimization PAUL AB920 Fsdpfxoia Nype Ah Ujgi - in a warehouse - German production - DTR - optimization of the cutting width - cross cut saw - automatic disc spacing TECHNICAL PARAMETERS: - max. workpiece width 920 mm - max. workpiece height 90 mm - max. workpiece length 6000 mm - main engine power 37 kW - disc diameter max. 300 mm - spindle diameter 60 mm - sleeve diameter 70 mm - fixed sleeve 60 mm long - floating sleeve for 1 disc - floating sleeve with a spindle 100 mm long - number of measuring heads 15 - spacing of measuring heads 350 mm - distance between the measuring heads - total feeder power 10 kW - cross-cut saw for cutting the material to a length of 2630 mm - saw leveling the material - cascade for transporting the board - hydraulic feed with smooth speed regulation - hydraulic material pressure - hydraulic material height adjustment

Year of construction: 1998, condition: good (used), Optimizer GreCon Dimter OPTICUT 204 R - year of production 1998 - full optimization - cutting to a dash - width measurement - possibility of cutting aluminum TECHNICAL PARAMETERS: - max. cutting length 4,000 mm - min. element 200 mm - max. cutting height 100 mm - max. cutting width 260 mm Fgjdsh Hfknopfx Ah Uji - disc diameter 500 mm - engine power 9 kW - feed speed max. 160 m / min - acceleration 2 m / s2 - optimization in terms of length and value - pneumatic pressure of the material - three ejectors - dump tables - Rotary table - total length of 2000 cm Transport dimensions: - length 1300 cm - width 245 cm - height 220 cm - weight 3500 kg

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, Metal Technika OWD 1600 Optimizer - manufactured in Poland - year of production 2017 TECHNICAL PARAMETERS: - cutting width 250 mm Fodpfx Asrx Rxpeh Usgi - cutting height 120 mm - Capacity from 3 200 to 8 150 mb /8 h - sorting table with 5 knockouts - Electronics Controller with color touch screen display "MITSHUBISHI" - Features - full optimization of 30 dimensions in two quality classes, - creation of cutting programs for different customers, - cutting at the point of marking with fluorescent crayon, - margin cutting (beginning and end of the input material) - cutting in packages (several elements at once) - meters, total, shift, operator, monthly counters, - cutting accuracy ±0.2 mm - Motor 5.5 KW (saw Ø500 - 140z) - Width of input mat 12 - 250 mm max. width / height ( 250 / 50 mm) - Height of input mat 12 - 120 mm max. h/w ( 120 / 130 mm) - Input mat length up to 4,200 mm - Lubrication Oil central lubrication system - Automation at the output Connection for slant conveyor and sorting table

Condition: excellent (used), TECNI-ARMENTIA CH-70 edger - hydraulic control - the possibility of programming the width - saving up to 12 programs - centering table TECHNICAL PARAMETERS: cutting width max. 700 mm cutting height max. 130 mm main engine power 55 kW material width max. 830 mm length of the fixed sleeve 300 mm length of the movable sleeve 100 mm Fgsdpfx Ahsidmpts Uoi min. material length 700 mm spindle diameter 65 mm sleeve diameter 85 mm disc diameter 350 - 400 mm hydraulically smoothly adjustable feed feed speed up to 38 m / min feeding table 2700 mm roll width 700 mm roll diameter 140 mm centering feeding table two lasers pump motor power 4 kW row of anti-recoil pawls three upper pulling rollers three lower pull rollers hydraulic pressure hydraulic height adjustment dimensions (length / width / height) 480/200/230 cm weight 4000 kg

Condition: used, Year of construction: 2001, functionality: fully functional, saw blade diameter: 450 mm, cutting height (max.): 100 mm, cutting width (max.): 245 mm, working height: 100 mm, type of input current: three-phase, – Year of manufacture: 2001 – Optimization – Cutting to line – The machine has additional tables, allowing a maximum cutting length of up to 6500 mm; currently reduced to 3400 mm – 8 cutting beams TECHNICAL SPECIFICATIONS: Fgodpfswtzrhox Ah Uoi – Max. cutting length: 6500 mm (currently 3400 mm) – Min. element length: 300 mm – Max. cutting height: 100 mm – Max. cutting width: 245 mm – Blade diameter: 450 mm – Motor power: 9 kW – Max. feed speed: 120 m/min – Acceleration: 10 m/s2 – Optimization according to length and value – Pneumatic material clamping – Five ejection units – Intelligent, controlled waste chute – Vario speed system – Total length: 17,500 mm – Transport dimensions (L/W/H): 800 / 245 / 220 cm – Weight: 3,500 kg