Used Holz Her 1410 for sale (173)

Condition: good (used), Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -Milling unit: unfortunately no type designation -Motor: 2x Holz-Her 2200 W / 2800 rpm -Drive belt: not included -Motor block: dimensions 400/340/300 mm -Milling unit: 530/440 / H300 mm -Weight: 81 kg Rcedpfjgyg Avjx Afgoh

Condition: ready for operation (used), Year of construction: 2024, machine/vehicle number: 167/2-401, functionality: fully functional, operating hours: 4,494 h, total height: 7,650 mm, total length: 2,000 mm, total width: 6,500 mm, Product Rip Saw Brand Holz-Her Type Zentre 6215 dynamic Measurements hxwxd approx. 200x650x765 cm Year 2024 Specifications Equipped with conveyor and discharge tables; dimensions: Conveyor belt LxWxH approx. 520x160x105 cm (A) ; discharge conveyor LxWxH approx. 470x273x105 cm (B) ; feed conveyor LxWxH approx. 490x370x105 cm © Rcsdpfx Afs Agu Itegjh Details Please note: Disconnect up to the shut-off valve; the shut-off valve is NOT included in the lot . Please note! The power supply must be professionally disconnected. The buyer must provide their own hoisting and lifting equipment and have the machine professionally removed from the premises.

Condition: used, machine/vehicle number: 008494, Position 1: Single Edgebanders HOLZHER-LUMINA + MASTER 5510 Position 2: Panel Return Systems HOLZHER-LUMINA + MASTER 5510 Rcedpfx Aezbxznsfgjh

Condition: used, machine/vehicle number: 008492, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt, PUR, Laser Premilling Unit: yes Rodpfxsz S T U Ie Afgoch Corner Rounding Unit: yes Max feed speed: 18 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: used, machine/vehicle number: 008493, Introduction system: with grippers Rodpfx Afsz S T Uusgjch

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Numerically adjustable infeed fence Air flotation infeed table Anti-adhesive liquid spray system Pre-milling unit with diamond cutters Edge feeder for edge banding from coil or strips Glue station for GlueJet cartridges or L-Tronic laser technology 4 pressure rollers with pneumatic pressure adjustment Edge lubricant spray system Dual-motor precision end trimming unit with pneumatic angle adjustment Top and bottom edge surplus trimming unit (straight trimming) Numerically adjustable profile edge milling unit Flat scraper Profile scraper – two profiles Cleaning liquid spray system Pneumatically activated buffing units Rodpfx Afszx Sxgsgjch Pneumatically activated edge buffing unit Feed speed continuously adjustable from 10 to 25 m/min Automatic lubrication of the feed chain Frame support Minimum workpiece length: 140 mm Workpiece thickness: 8–60 mm Minimum workpiece width: 60 mm Year of manufacture: 2016

Condition: used, Year of construction: 2019, functionality: fully functional, operating hours: 7,996 h, power: 10.3 kW (14.00 HP), controller manufacturer: HOLZ-HER, actuation type: electric, Equipment: documentation/manual, For sale, directly from our kitchen and interior production facility. Compact vertical CNC woodworking center for drilling, milling, and grooving sheet material. The machine is offered including the tools, manuals, and electrical diagrams listed below. MACHINE DETAILS • Brand: HOLZ-HER Maschinenbau GmbH, Austria • Model: Evolution 7405 4mat - BAZ19V5 • Year of construction: 2019, invoice and commissioning in 2020 • Control/software: CAMPUS 7.5.3.10 • Vacuum pump: Becker VT 4.8 • First owner • Automatic central lubrication • 2D barcode scanner USAGE DETAILS Meter readings as of October 1, 2026: • Machine operating hours: 7,996 hours • Active feed ("Vorschub aktiv"): 598 hours • Workpiece counter: 22,887 Rods Ab Uzaspfx Afgjch • Tool changes: 21,584 • Last maintenance on July 2026, complete history available INCLUDED TOOLS • 1 left-hand cutting milling cutter Ø20 mm, length 28 mm • 1 right-hand cutting milling cutter Ø20 mm, length 28 mm • 1 right-hand cutting milling cutter Ø8 mm, length 22 mm • 1 right-hand cutting milling cutter Ø10 mm, length 22 mm • 1 drill Ø35 mm, length 15 mm • 5 drills Ø5 mm, length 25 mm • 1 drill Ø8 mm, length 35 mm • 1 drill Ø10 mm, length 35 mm • 1 drill Ø10 mm, length 90 mm • 5 drills Ø8 mm, length 15 mm • 1 saw blade Ø120 mm, thickness 4.5 mm DOCUMENTATION • Manuals available • Electrical diagrams available • Machine software installed on the CNC SALE AND PICK-UP The machine is still operational (located in the Anzegem area) and can be demonstrated by appointment. Availability and pick-up by arrangement. Dismantling, loading, and transport are not included. Demo video available upon request. Interested? Contact us for additional information or to schedule a viewing.

Condition: as good as new (ex-display), Year of construction: 2026, machine/vehicle number: 919/2-602, functionality: fully functional, operating hours: 7 h, Equipment: CE marking, documentation/manual, HOLZ-HER, STREAMER 1057 XL Classic, year of manufacture 2026, showroom machine for sale. Technical data Machine type: Edge banding machine Model: HOLZ-HER STREAMER 1057XL classic Edge thickness, roll material: 0.4 – 3 mm Edge thickness, strip material: 0.4 – 6 mm Edge height: max. 65 mm Workpiece thickness: 8 – 60 mm Workpiece width: min. 65 mm Workpiece length: min. 160 mm Feed rate: 10 m/min Voltage / Frequency: 400 V / 50 Hz Machine configuration & equipment Control system: Edge Control BC 15 with 15.6" touchscreen (color display 16:9, network-enabled, password-protected) Setup system: VISE (Visual Setting Mode) – digital logbook for setting values and digital counter Infeed area: Retractable workpiece support (distance 600 mm) Long infeed fence (1252 mm) BS501 guide system for right-angled feeding of narrow parts Jointing unit: FG201 with 2 milling heads (co-rotating/counter-rotating), incl. diamond-tipped milling cutters (Ø~70×48×30 mm) and Air Stream system Edge feeder: MG301 for roll and strip material with support plate (Ø~820 mm) Glue application system: Glu Jet GJ301 (hybrid technology for EVA and PUR adhesives in cartridges and as granules, fast heating within 3 minutes, automatic regulation of glue height and automatic refill function) Pressing unit: DW201 pneumatic (1 driven roller, 2 conical pressure rollers) Trimming unit: KA501 pneumatic (2×0.45 kW, pneumatically swiveling 0 - 10°) Rodpj Agnllefx Afgech Multi-function milling unit: FR201 (2×0.6 kW) Profile milling unit: FF201 (1×0.35 kW) Finishing: Scraping unit ZK301 (with 2 supports and digital displays) Surface scraping blade FK702 Lighting: LED lights (3 pcs) for the infeed and processing area

Condition: used, Year of construction: 2017, Direct Numerical Control NC HOPS with Campus software Working range in X axis mm 3400 Working field in Y axis mm 1600 Working field in Z mm 300 Worktop with 6 adjustable bars No. 3 suction cups each work bar for holding the piece being processed N° 1 5-axis electrospindle, 10 KW, with automatic tool change, Hsk F63 type cones Boring head with 24 spindles as follows: N. 12 Y-axis vertical spindles N. 6 X-axis vertical spindles N. 4 horizontal spindles Y axis N. 2 X-axis horizontal spindles Automatic tool change system with 18 positions - positioned on the back of the machine Frontal protection and safety system with carpets and perimeter nets Automatic lubrication system Air conditioning system for the switchboard No. 1 vacuum pump Redpfxjwwiybs Afgech

Condition: excellent (used), Year of construction: 2017, 0,4 - 8 mm Workingpiece thickness from to 8 - 60 mm Total length ca. 4.930 mm Redpfx Ae Agw Sxjfgoch Feed speed 10 m/min. total power requirement max. 6,1 kW kw Weight 1.400 kg

Condition: used, Year of construction: 2007, functionality: fully functional, Equipment: CE marking, documentation/manual, Holz-Her Sprint 1317 Edge Banding Machine Manufacturer: Holz-Her Model: Sprint 1317 Year of Manufacture: 2007 Equipment • Pre-milling unit • Gluing unit • Roller magazine for roller edges • Automatic trimming • Multi-milling unit (flush trimming / radius milling / chamfering) • Corner rounding unit • Profile scraping blade • Surface scraping blade • Polishing unit • Automatic unit adjustment • Control panel with operating panel • 400 V connection Technical Data • Workpiece height up to 60 mm • Roller edges up to 3 mm • Edges up to 8 mm • Feed rate up to 18 m/min • Minimum workpiece length 180 mm • Minimum workpiece width 60 mm Rcodpfx Aez R A U Isfgjh Description For sale is a Holz-Her Sprint 1317 edge banding machine in very good condition. The machine has extensive equipment for professional edge processing and impresses with its robust construction and precise processing results. Processing sequence • Pre-milling • Glue application • Roller edge banding • Automatic trimming • Flush and radius milling • Corner rounding • Profile scraping blade • Surface scraping blade • Polishing The machine was in use until recently and can be inspected by appointment.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, This vertical machining center, including the "Clamex unit," is for sale and has seen only a few hours of operation. The machine is being sold because we have switched to a nesting machine. In 2021, the machine was upgraded with a more powerful vacuum pump (16.3 m³). The machine also includes various vacuum clamps; we purchased several larger plates in addition to the standard equipment. Workpiece size: X = 200 - 3200 mm (longer with additional support) Y = 70 - 1200 mm (= max. opening) Material thickness: Z = 8 to 70 mm Max. contour milling dimension in X-direction without clamping: X = 1500 mm Max. contour milling dimension in Y-direction: Y = 985 mm, less milling cutter radius Max. drilling dimension horizontally in X-direction: H = 1168 mm Z-axis stroke: Z = 240 mm Maximum programmable speed: Vector speed: 68 m/min X = 25 m/min, Y = 60 m/min, Z = 20 m/min Milling spindle 7830, power: 7.5 kW (S6), air-cooled with HSK-F 63 tool holder n(max.) = 1000 - 24,000 min-1, continuously adjustable with collet chuck with HSK shank, ceramic ball bearing (hybrid bearing), tool weight max. 6 kg (incl. holder) Tools: max. Ø 110 mm, tool length max. 80 mm Tool changer 7887, 6-position magazine - pick-up system, pneumatic, max. Ø tool: Ø 110 mm Maximum tool weight: > 5 kg per tool or 30 kg when fully loaded Can be equipped with collet chuck with HSK shank Tool changer 7874, 1-position aggregate magazine, swiveling in X and Y directions, only for special bevel gear 7869 with HSK holder Vertical spindles can be activated individually Arrangement in L-shape, 5 in X and 4(5) in Y direction 32 mm grid Max. drill diameter: 35 mm Total drill length: 70 mm from mounting end (depending on plate thickness) Spindle extension stroke: 70 mm Direction of rotation: alternating right/left n(max.) 1000 - 4400 min-1, continuously adjustable Holder: M 10 thread - parallel seat 11 mm without tool, without holder 6 horizontal spindles 2 double drilling spindles in X-direction 1 double drilling spindle in Y-direction Holder: M 10 thread, parallel seat 11 mm Total drill length max. 63 mm from mounting end without tool, without holder Sawing unit Integrated sawing unit for sawing/grooving in X-direction n(max.) 1000 - 5650 min-1, continuously adjustable Tool holder: A max Ø = 120 mm, I Ø = 20 mm, B = max. 4.0 mm 4-axis “CLAMEX” tool set - Incl. original tool set consisting of 2 pcs. P-system slot milling cutter, DP (diamond) 100.4x7x30mm, Z3, NLA 4/6,6/48mm 1 pc. Milling arbor for P-system slot milling cutter S20x50mm, d=30, L=102, DTK 48mm 1 pc. Milling arbor for P-system slot milling cutter S16x55mm, d=30, L=68, DTK 48mm 1 pc. CNC drill 6mm for Clamex P, L= 57.5 / shank 10x27 / left 1 pc. Adapter for drill with shank d= 10 mm (left) 1 pc. Collet DIN 6388 form B, double slit, size 25 Rjdjz In Ugjpfx Afgech Clamping diameter 20, for HSK-F 63 holders

Condition: used, Year of construction: 1983, usedMake Holz-HerType 1215Year of construction 1983MachineNo. 1222cutting depth 80 mmmotor 4 kWcutting length approx. 5300 mmcutting height approx. 2000 mmsaw blade diameter approx. 300 mmfree-standingslatted frame moving awaysuction connection D approx. 100 mmspace requirement approx. 6300 mm x 1100 mm x 2700 mmWeight approx. 1000 kgTotal connected load approx. 3 kWStorage location 97447 Gerolzhofen, free loaded, unpackedHandover in as-is condition as inspectedwithout guarantee and warranty Rcedpfxjvwfnpe Afgoh

Condition: used, Year of construction: 2017, Used machine Year of manufacture: 2017 Condition: Functionally tested Equipment and technical data: Cutting length: 4,300 mm Cutting height: 2,200 mm (edge trimming height 2,100 mm) Saw unit 4 kW TRK device Rjdpfx Afe Adv Rzogsch Manual length stop Middle support, fold-out, continuous Location: NRW (North Rhine-Westphalia) Availability: Short-term

Condition: good (used), Year of construction: 1997, machine/vehicle number: 1349, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, workpiece height (max.): 850 mm, edge thickness (max.): 60 mm, total height: 1,725 mm, total length: 7,540 mm, HOLZ-HER Variant 1446 5.10 Year of manufacture: 1997 Edge banding machine, single-sided Working range according to brochure: Edge thickness: 0.3 - 30 mm Workpiece thickness: 6 - 60 mm Workpiece width min.: 60 mm Workpiece length min.: 140 mm Feed rate: 8/16 m/min (depending on configuration) Listing for machine search platform HOLZ-HER Variant 1446 5.10 Edge Banding Machine | Year of manufacture 1997 For sale is a HOLZ-HER Variant 1446 5.10 edge banding machine in used, functional condition. The machine was used in the production of door elements and is ideally suited for the economical edge banding of panel materials and solid wood components. Rcjdpfo Adrgfjx Afgoh Technical data Manufacturer: HOLZ-HER Type: Variant 1446 5.10 Year of manufacture: 1997 Machine no.: 151 / 9-704 Edge thickness: 0.3 - 30 mm Workpiece thickness: 6 - 60 mm Workpiece width min.: 60 mm Workpiece length min.: 140 mm Feed speed: 8 / 16 m/min Compressed air connection required Equipment Edge magazine Glue application station Pressure zone Trimming unit Further equipment according to machine configuration

Condition: excellent (used), Year of construction: 2017, machine/vehicle number: 138/1-703 15509125, functionality: fully functional, input voltage: 400 V, input current: 18 A, input frequency: 50 Hz, edge thickness (max.): 15 mm, height adjustment type: electric, actuation type: electric, total height: 2,230 mm, total length: 8,755 mm, total width: 2,416 mm, overall weight: 4,200 kg, Edge banding machine (for laminated boards): Rcedpfx Ajz I R Snjfgsh Year of manufacture: 2017 Type: LUMINA 1586 PREMIUM Serial number: 138/1-703 15509125 Control system: HOL-HER EDGECONTROL TOUCH PPC 319 Gluing technology used: EVA glue granules GlueJet (exchangeable station), L-Tronic laser (exchangeable station) Units: pre-milling cutters, gluing station, pressure unit, trimming saw (two motors, with pneumatic angle adjustment), milling units (for straight and radius edges), rounding units (2 motors, digitally adjustable), sanding units (profiled and flat), indexing unit (NC axes), polishing unit Workpiece thickness: 8 mm – 60 mm Minimum workpiece width: 150 mm Maximum edge banding thickness: 15 mm Maximum edge banding thickness in roll form: 3 mm Maximum edge banding height: 64 mm Machine length: 8.755 m Width with retracted roller support: 1830 mm Width with extended roller support: 2416 mm Minimum height: 1814 mm Maximum height: 2230 mm Workpiece inlet height: 877 mm Machine weight: 4200 kg Minimum electrical connection power: AC 400 V 50 Hz + N … 18A Compressed air, working pressure: 6 bar Compressed air, maximum pressure: 8 bar Chip extraction, connections: 2x Fi 120 mm, 2x Fi 140 mm Zero joint: infrared Electrical height adjustment: YES Top belt pressure: YES Maximum feed rate: 25 m/min Feed rate adjustment, stepless: YES Heating zone: YES Spray nozzles: YES Machine documentation: YES Complies with all relevant provisions of the following EC directives: Machinery Directive 2006/42/EC, Electromagnetic Compatibility Directive 2014/30/EU

Condition: used, Year of construction: 1996, Used Machine Features and Technical Specifications: - Automatic edge magazine for rolls up to 3 mm; manual feed for strips up to 13 mm - Trimming shears for up to 3 mm - Cartridge-type adhesive application system - 3-roller pressure unit - 2-motor trimming unit - Multifunction routing unit (flush, radius, chamfer) - Radius scraper - Corner copying unit - Surface scraper - Buffing unit - Edge banding thickness: 0.4–13 mm (with tool change) - PVC edges up to 3 mm - Edge banding height: max. 51 mm Redpfxe Aa A I Sj Afgech - Edge banding length: min. 200 mm - Edge banding overhang per side: max. 3 mm - Workpiece width: min. 60 mm - Workpiece length: min. 180 mm - Workpiece thickness: min./max. 6/45 mm - Feed rate: 11 m/min. - Dimensions: 4500 x 1020 x 1630 mm - Distance from wall: 400 mm New gluing station installed in 2015

Condition: used, Year of construction: 2018, Used machine Used edge banding machine from Holz-Her, model Sprint 1329 Performance, with Return system from Barbaric, type RTS 01 Edge banding machine: Year of manufacture: 2018 Motorized roller bridge 1329 PERFORMANCE iTronic - Adaptive pressure and glue quantity control, automatic fine adjustment depending on the program Infeed fence, standard B20 mm Infeed fence for precise feeding of the workpiece Rcjdjzt Twtopfx Afgeh Edge Control 19 control system with 18.5" touchscreen color display 16:9 Jointing cutter unit 1802 (2 x 2.0 kW, 200 Hz, 12000 min-1) with 2 cutter units for jointing the edge of the panel (1x forward rotation, 1 x reverse rotation) Edge feeder 1901 SYNCHRO, automatic transport of coil and strip material Glue application station Glu Jet GJ301 automatic (2.3 kW, 50 Hz) Pressure unit 1913, motorized, 1 roller driven, 2 follower rollers Spray device (release agent) after the pressure unit with 2 spray nozzles for coverage up to 60mm working height Trimming unit 1918 (60 mm), pneumatic (2 x 0.45 kW, 12000 min-1), pneumatically swiveling 0/10° Cutter unit FR701, 100% repeat accuracy at the push of a button thanks to play-free mechanics Shaping cutter unit FF701, 100% repeat accuracy at the push of a button thanks to play-free mechanics Scraping unit 1929 MOT4 incl. high-gloss package with motorized adjustment of the feeler rollers Surface scraping blade FK701 with pre- and post-sensing for removing glue residue Motorized adjustment of the infeed fence for precise feeding of the workpiece to the jointing cutter unit Automatic chain lubrication / intelligent automatic transport chain lubrication GLU JET collection container Spray device 1856 for the infeed and outfeed area: Buffing unit 1940 (2 x 0.12 kW, 50 Hz, 1400 min-1) For final polishing and edge polishing. With 2 textile discs, swivel range 0 - 5° RETURN system connection (emergency stop interlocking) Connection of a workpiece return system to the control system from HOLZ-HER Machine dimensions approx. 5600 x 1010 x 1900 mm Machine weight approx. 2100 kg Return system: Year of manufacture: 2018 Machine number: 2180122-206 Further details can be found in the PDF Availability: by arrangement Location: Röllbach

Condition: used, Year of construction: 2017, HOLZ-HER Edgebanding Machine LUMINA 1380 Used machine Year of manufacture: 2017 Condition: Well-maintained Motorized pressure beam adjustment Edge thickness, roll material: 0.4 - 3 mm Edge thickness, strip material: max. 3 mm with unit FF701 max. 8 mm without unit FF701 max. 15 mm with tool change on the multi-function milling unit Edge height: max. 65 mm Workpiece thickness: 8 - 60 mm Workpiece width: min. 60 mm Workpiece length: min. 160 mm Feed speed: continuously variable, 10 - 18 m/min Control system Edge Control 19 with 18.5" touchscreen color display 16:9 ECO MODE energy-saving mode Infeed fence, 1350 mm long Motorized adjustment of infeed fence Joint milling unit 1802, edge feed MG701 SYNCHRO Glue application station Glu Jet GJ302 automatic (refurbished in 2026) Including changeover trolley Including quick-change couplings Including HSK mounting for the unit Including automatic unit detection GLU JET collection container Pressing unit 1913 MOT Cutting unit 1918 (60 mm) pneumatic (2 x 0.45 kW, 12000 min-1) pneumatically pivoting 0/10° Milling unit FR701 6 fully digital NC servo axes. Profile milling unit FF701 4 fully digital NC servo axes. Scraper unit 1929 MOT4 incl. high-gloss kit Surface scraper FK701 Spraying system 1856 for the infeed and outfeed area Rsdpfxezpzy Uj Afgoch Spraying system (release agent) after the pressing unit Automatic chain lubrication Adaptive pressure and glue quantity control Location: Bavaria Availability: approx. August 2026

Condition: used, Year of construction: 2013, Used machine Year of manufacture: 2013 Condition: Functionally tested Equipment: Base machine Extendable boom Joint milling unit 1801 Edge feed system, fully automatic 1903 Glujet 201 adhesive application system, cartridge Printing unit 1912-3, pneumatic Cutting unit 1918 Combination milling unit FR201 Pulling blade unit 1929 Chip collection box Rodpfx Aozu T Sgofgech Surface pulling blade 1964 Location: Flörsheim Availability: Short-term

Condition: not inspected (used), Year of construction: 1995, functionality: unexamined, power: 7.5 kW (10.20 HP), type of input current: three-phase, actuation type: electric, total height: 1,400 mm, total length: 5,200 mm, total width: 1,400 mm, overall weight: 1,500 kg, year of last overhaul: 2021, Edge gluing from 0.6 to 13 mm Cartridge gluing Pre-milling Fine milling Cutting twice Rcjdoz A Dhrjpfx Afgjh Pull knife Smoothing Year of manufacture is estimated Machine was stored a year ago Until that time, it was fully functional.

Condition: good (used), Year of construction: 2003, machine/vehicle number: 694/0-302 (2003), functionality: fully functional, operating hours: 2,580 h, power: 12 kW (16.32 HP), workpiece height (max.): 48 mm, workpiece width (max.): 60 mm, edge thickness (max.): 15 mm, height adjustment type: electric, feed rate X-axis: 11 m/min, overall weight: 2,000 kg, Equipment: documentation/manual, Holzher Sprint 1417, manufactured in 2003 - Can also be operated separately without Ligmatech - - Ideal for high-quality furniture production; HPL and matte decors are no problem - Machine completely controlled by PLC, almost everything can be adjusted at the control panel; no defects; well-maintained machine used with expertise. Leuco Z3 edge trimming cutter installed; a second set of cutters is available, along with various insert blades. Panel thickness max. approx. 48 mm; edge banding from 0.3-15 mm possible. Chain conveyor renewed approximately 10 years ago. Spray system for separating and cleaning agents, controlled according to application. - Jointing fence, motor-driven, program-controlled. - Edge trimming spindles 1961, 2 x 2.0 kW. - Glue system, cartridge 1906, with sensing nozzle (important), cartridge magazine for 4 cartridges, color change easily possible, PU also possible. - Pressing unit 1903 MOT, pressure of 1st and other rollers adjustable separately. Rcedpfx Ajz Dxh Nsfgjh - Miter saws 1918, bevel cuts adjustable. - Flush trimming 1823. - Radius trimming 1942 MOT (one axis motor-adjustable for 1 and 2 mm edges, selectable at the control panel). - Profile trimming blade 2 mm 1929, pneumatically timed. - Corner copying unit 1983, carbide, with adjustment at the control panel, functional, but needs fine adjustment. - Straight trimming blade 1964. - Oscillating unit, controlled according to application. Includes all operating manuals, documentation of process points digitally and in printed form by Holzher technicians. One set of DIA edge trimming cutters is included, as well as various insert blades for the trimming units. Chip transport system ZHR 15 Boomerang, manufactured in 1995 Mounted on the machine with connection to the pressing bridge, easily adjustable from the front panel, with rotating device for parts. Adjusted to the feed rate; sensors still available from HOMAG. - Information without guarantee; the parties agree that the sale of the used machine takes place with complete exclusion of any warranty, guarantee, and liability for defects. The buyer has inspected and tested the machine before purchase. - Sale only to commercial businesses; machine is currently powered and in operation. Price is negotiable. Machine available after clarification in December/January 2027. Crane or forklift loading also possible from an external warehouse.

Condition: good (used), Year of construction: 1994, workpiece height (max.): 60 mm, feed rate X-axis: 11 m/min, total length: 4,800 mm, overall weight: 1,000 kg, Edge bander HolzHer, model 1437 SE, very well equipped; cartridge adhesive station, flush trimming with two milling units, radius R=3mm, two additional units available for exchange, profile trimming, chamfering. Rjdjzzz Aaopfx Afgoch

Condition: used, Year of construction: 1981, used, good conditionMake Holz-HerType 1215Year of manufacture 1981MachineNo. 710motor 4.0 kWcutting length approx. 5300 mmcutting height approx. 2100 mmcutting depth 80 mmsaw blade diameter approx. 300 x 30 mmfree-standingslatted frame moving awayspace requirement approx. 6550 mm x 1265 mm x 2895 mmweight approx. 1000 kgstorage location 97447 Gerolzhofen, free loaded, unpackedhandover in as-is condition as inspectedwithout guarantee and warranty Redpfxovwfmxj Afgoch

Condition: used, Year of construction: 2021, functionality: fully functional, For Sale: Premium Holz-Her 1329 Multi Edgebander + Return-Master 5920 We are selling a high-end Holz-Her 1329 Multi edgebanding machine, including the Return-Master 5920 return system. The unit is 4 years old and in excellent condition. Original New Price: €138,000 + VAT Rcedpfsygrghox Afgjh Our Price: €69,000 + VAT (50% savings) Why choose this machine? Get a premium, lightly used machine for the same price as a subsidized unit, but without the paperwork, bureaucracy, or long-term obligations of a grant application. Maintenance: Regularly serviced by the expert Dimpex technical team. Performance: High-spec "Multi" version for versatile production needs. Serious inquiries only, please.