Used Holzher 1405 for sale (171)

Condition: excellent (used), functionality: fully functional, Complete machinery set for sale, consisting of: Holzher machinery in new condition (in operation since 06/2024), including: Tectra 6120 Dynamic beam saw, automatic panel storage system Storemaster 5110 (approx. 12x18m) Nextec 7705 nesting machining center Weinig Dimter Opticut S60 optimizing miter saw (year of manufacture 2009) including waste conveyor belt (new, in operation since 06/2024) Nestro dust extraction system (in operation since 06/2024), including: filter tower 11 kW + 7.5 kW (15,000 m³/h) briquette press shredder piping for all machines, various pipe diameters Mobile dust extraction unit Holzkraft RLA160 2x mobile dust extraction units ASA2553 or similar 2x Renner compressors, 7.5 kW each (1 of which is new and has been in operation since 06/2024) 1x Ayen multi-spindle drilling machine, special design with 2.5m stop gauge 1x Cesab B625 electric forklift, 2.5 tons (year of manufacture 2014) 2x electric high-lift pallet trucks Toyota/BT (year of manufacture) 3x electric high-lift pallet trucks Cesab including initial lift (year of manufacture 2025) Crodpfx Aezh Hw Ajktei Various workbenches, templates, pallet racking, material carts, etc. BeA various nailers and staplers Various electric power tools, vacuum cleaners from Festool, Bosch Prof., etc. Bench drill Stürmer Festool table saw Bosch large panel miter saw on stand EUR 460,000,- net (Total price EXW (ex works) for self-dismantling/collection) If you are seriously interested, we would be happy to provide pictures and details of the individual items.

Condition: used, machine/vehicle number: 008494, Position 1: Single Edgebanders HOLZHER-LUMINA + MASTER 5510 Position 2: Panel Return Systems HOLZHER-LUMINA + MASTER 5510 Cjdpfx Aozbxznskteri

Condition: used, machine/vehicle number: 008492, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt, PUR, Laser Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 18 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr Cjdpfx Aez S T U Iekteri

Condition: used, Year of construction: 1988, machine/vehicle number: 387/8-84, functionality: fully functional, type of input current: three-phase, workpiece height (max.): 45 mm, edge thickness (max.): 51 mm, height adjustment type: mechanical, feed rate X-axis: 11 m/min, actuation type: electric, total height: 1,280 mm, total length: 3,750 mm, total width: 850 mm, overall weight: 756 kg, Equipment: CE marking, documentation/manual, Mode of operation: hot/cold process, one-sided left Credpjy Dh D Esfx Aktsi Edge band thickness: 0.4 - 8 mm Maximum edge band height: 51 mm Workpiece dimensions: width min. 50 mm, length min. 180 mm, thickness min. 6 mm Feed speed approx. 11 m/min Glue application via blade nozzle End trimming Flush trimming – tiltable up to 15 degrees Radius trimming – tiltable up to 15 degrees Buffing unit Compressed air requirement: 6 bar

Condition: used, machine/vehicle number: 008493, Introduction system: with grippers Codpfoz S T Uusx Aktori

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, Equipment: CE marking, documentation/manual, Holzher Auriga 1308 XL Crodpfs Ah Hi Ijx Aktsi Suitable for polyurethane coatings.

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, Equipment: ABS, documentation/manual, Holzher sprint 1329 premium edition Csdpfxj Ahfdgj Akteri

Condition: good (used), Year of construction: 1988, Work piece thickness 0,4 - 8 mm Work piece height max. 51 mm Min. work piece width 50 mm min work piece length 180 mm edge magazine for PVC and strips pneumatic pressure rollers for edge magazine edge snipping unit cutting unit with 2 saws milling aggregate buffing unit Feed speed 11 m/ min Glue application with fin nozzle Air pressure 6 bar Crsdpfxjbahd Ej Aktoi length 3750 mm

Condition: ready for operation (used), Year of construction: 2020, machine/vehicle number: 210/2003, functionality: fully functional, operating hours: 6,635 h, power: 29 kW (39.43 HP), input voltage: 400 V, input current: 50 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, workpiece width (max.): 3,000 mm, workpiece length (max.): 5,000 mm, edge thickness (max.): 3 mm, height adjustment type: electric, feed rate X-axis: 25 m/min, actuation type: electric, total height: 2,223 mm, total length: 9,420 mm, total width: 1,368 mm, overall weight: 4,350 kg, Equipment: CE marking, documentation/manual, HOLZ-HER ACCURA 1556 Premium – Year of manufacture 2020 – Very well maintained We are offering our HOLZ-HER ACCURA 1556 Premium edge banding machine, manufactured in 2020, for sale. The machine has always been treated with great care by its dedicated operator and has been fully maintained by the supplier throughout its entire service life. The machine has always been kept in excellent condition, and there have never been any major incidents or serious machine damage. Technical improvements and upgrades Reinforced pre-milling motors: The originally installed pre-milling motors were generally too light. Therefore, approximately two years ago, these were replaced with a heavier and improved type. These motors function excellently and represent a significant technical improvement compared to the original design. Automatically switchable profile milling cutters (factory option): The machine is equipped as standard with the option to automatically switch between the profile milling cutters with a radius of 1 mm (R1), a radius of 2 mm (R2), and chamfer milling cutters. This allows for easy and quick switching between different edge finishing operations without manual adjustment of the milling heads. Crsdo Ahhwzjpfx Aktji Additional Riepe brush system: Riepe has installed an additional brush system specifically for cleaning and processing edge material with a deep surface texture. Condition and maintenance The machine has always been operated carefully, well maintained, and serviced according to the maintenance instructions by the supplier. Thanks to the consistent maintenance, careful operation, and implemented technical improvements, this is a well-maintained edge banding machine with extensive equipment. The machine can be viewed and demonstrated in working order by appointment. If you are seriously interested, we will be happy to provide additional information and photos.

Condition: used, Year of construction: 2007, Panel dividing saw Manufacturer: HolzHer Type: 6310 CUT 110 Year of manufacture: 2007 Technical data - Cutting length: 4250 mm - Cutting width: 5250 mm / reduced by 2550 mm to 2700 mm - Display on the right - Cut Control control system with touch screen operation - Angle pressing device on the right - Saw carriage with main/scoring saw control - Power: 18.5 kW / 2.2 kW - Manual adjustment of scoring saws in width and height - Grooving device with 2 groove height settings (groove depth adjustable from 2-12 mm, up to max. 9-19 mm) - Label printer TLP2742 - Cut-out device - Additional blowing device on the saw carriage - 3 additional support tables, 2400 mm, with drive system - Control cabinet on the machine side including speed monitoring with safety shutdown - Postforming unit including scoring unit - Automatic central lubrication - Closed pressure beam - Film cutting device Optional, at an extra charge: Extraction system Manufacturer: AL-KO Type: POWER UNIT 300P Year of manufacture: 2011 Technical data - V = 5089 m³/h - Vacuum: 2050 pA - Motor power: 7.5 kW - Suction nozzle 300 mm - 3 collection containers, 250 l each - Integrated extinguishing system Crsdpfxozuy Nls Aktji Note: The technical data and descriptions are copies of the original order confirmation. The information is for informational purposes only and is not binding.

Condition: used, Year of construction: 2002, - Panel length: 4.5 m Crjdpjzuyyksfx Aktsi - Panel height: 2.2 m - Without scoring blade Used vertical panel saw Manufacturer: Holzher Type: 1255 Year of manufacture: 2002 Not refurbished - no warranty Technical data - Panel length: 4.5 m - Panel height: 2.2 m - Without scoring blade Note: The technical data and descriptions are taken from the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, operating hours: 335 h, total height: 2,100 mm, total length: 6,500 mm, total width: 1,500 mm, Year of manufacture: 2009 Colour: White Weight: 2.200 kg - Year: 2009 Crjdpe Ahygnofx Aktei - Documentation available: Yes - CE marking present: Yes - Serial number: 74 - Operating hours: 335 - Number of units [pcs]: 9 - └ 1st unit type: Pre-milling unit - - Type/Brand: 1856 - - Tools available: Yes - └ 2nd unit type: Glue unit - └ 3rd unit type: Pressure rollers - - Type/Brand: 1913 - - Tools available: Yes - └ 4th unit type: Cap unit - - Type/Brand: 1918 - - Tools available: Yes - └ 5th unit type: Rough milling unit - - Type/Brand: 1826 - - Tools available: Yes - └ 6th unit type: Corner rounding unit - - Type/Brand: 1833 - - Tools available: Yes - └ 7th unit type: Radius scraping unit - - Type/Brand: 1929 - - Tools available: Yes - └ 8th unit type: Flat scraping unit - - Type/Brand: 1964 - - Tools available: Yes - └ 9th unit type: Brushing unit - - Type/Brand: 1940 - - Tools available: Yes - Max. edge band thickness [mm]: 8 - Min. panel thickness [mm]: 6 - Max. panel thickness [mm]: 60 - Min. panel width [mm]: 60 - Min. panel length [mm]: 180 - Min. feed speed [m/min]: 10 - Max. feed speed [m/min]: 18 - Glue system: Glue pot - Type of glue: PUR - Voltage [V]: 400 - Current consumption [A]: 56.95 - Fuse [A]: 80 - Transport dimensions: 6500mm x 1500mm x 2100mm (l x w x h) - Transport weight [kg]: 2200kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2019, functionality: fully functional, operating hours: 7,996 h, power: 10.3 kW (14.00 HP), controller manufacturer: HOLZ-HER, actuation type: electric, Equipment: documentation/manual, For sale, directly from our kitchen and interior production facility. Compact vertical CNC woodworking center for drilling, milling, and grooving sheet material. The machine is offered including the tools, manuals, and electrical diagrams listed below. MACHINE DETAILS • Brand: HOLZ-HER Maschinenbau GmbH, Austria • Model: Evolution 7405 4mat - BAZ19V5 • Year of construction: 2019, invoice and commissioning in 2020 • Control/software: CAMPUS 7.5.3.10 • Vacuum pump: Becker VT 4.8 • First owner • Automatic central lubrication • 2D barcode scanner USAGE DETAILS Meter readings as of October 1, 2026: • Machine operating hours: 7,996 hours Cedj Ab Uzaepfx Aktsri • Active feed ("Vorschub aktiv"): 598 hours • Workpiece counter: 22,887 • Tool changes: 21,584 • Last maintenance on July 2026, complete history available INCLUDED TOOLS • 1 left-hand cutting milling cutter Ø20 mm, length 28 mm • 1 right-hand cutting milling cutter Ø20 mm, length 28 mm • 1 right-hand cutting milling cutter Ø8 mm, length 22 mm • 1 right-hand cutting milling cutter Ø10 mm, length 22 mm • 1 drill Ø35 mm, length 15 mm • 5 drills Ø5 mm, length 25 mm • 1 drill Ø8 mm, length 35 mm • 1 drill Ø10 mm, length 35 mm • 1 drill Ø10 mm, length 90 mm • 5 drills Ø8 mm, length 15 mm • 1 saw blade Ø120 mm, thickness 4.5 mm DOCUMENTATION • Manuals available • Electrical diagrams available • Machine software installed on the CNC SALE AND PICK-UP The machine is still operational (located in the Anzegem area) and can be demonstrated by appointment. Availability and pick-up by arrangement. Dismantling, loading, and transport are not included. Demo video available upon request. Interested? Contact us for additional information or to schedule a viewing.

Condition: excellent (used), Year of construction: 2017, machine/vehicle number: 138/1-703 15509125, functionality: fully functional, input voltage: 400 V, input current: 18 A, input frequency: 50 Hz, edge thickness (max.): 15 mm, height adjustment type: electric, actuation type: electric, total height: 2,230 mm, total length: 8,755 mm, total width: 2,416 mm, overall weight: 4,200 kg, Edge bander (for laminated boards): Year of manufacture: 2017 Type: LUMINA 1586 PREMIUM Serial number: 138/1-703 15509125 Control system: HOL-HER EDGECONTROL TOUCH PPC 319 Adhesive technology used: EVA hot melt adhesive in granular form (GlueJet, interchangeable station), L-Tronic laser (interchangeable station) Units: pre-milling cutters, gluing station, pressure unit, trimming saw (two motors, with pneumatic angle adjustment), milling units (for straight and radius edges), edge rounding unit (2 motors, CNC-controlled), sanding units (profile and flat), infeed system (NC axes), polishing unit Workpiece thickness: 8 mm – 60 mm Minimum workpiece width: 150 mm Maximum edging thickness: 15 mm Maximum edging thickness in roll form: 3 mm Maximum edging height: 64 mm Machine length: 8.755 m Width with retracted roller support: 1830 mm Width with extended roller support: 2416 mm Minimum height: 1814 mm Maximum height: 2230 mm Workpiece infeed height: 877 mm Machine weight: 4200 kg Electrical minimum connection power: AC 400 V 50 Hz + N … 18A Compressed air, working pressure: 6 bar Compressed air, maximum pressure: 8 bar Chip extraction, connections: 2x Fi 120 mm, 2x Fi 140 mm Credez I R Snjpfx Aktei Zero joint: infrared Electric height adjustment: YES Top conveyor belt pressure unit: YES Maximum feed rate: 25 m/min Infinitely adjustable feed rate: YES Preheating zone: YES Spray nozzles: YES Machine documentation: YES Operating hours: 8,788 h Total number of edged panel sides: 1,138,998 pieces Total length of edged material: 966,123 m Complies with all relevant provisions of the following EC directives: Machinery Directive 2006/42/EC, Electromagnetic Compatibility Directive 2014/30/EU

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 3,946 h, overall weight: 7,000 kg, type of input current: AC, travel distance X-axis: 3,700 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 120 mm, total length: 7,150 mm, total width: 2,440 mm, total height: 2,400 mm, spindle motor power: 10,000 W, spindle speed (max.): 24,000 rpm, Equipment: documentation/manual, This 5-axis HOLZHER Dynestic 7535 was manufactured in 2018. It features a working area of 3700 x 2100 x 120 mm and a powerful 10 kW spindle with a speed of 24,000 rpm. The machine includes an 18-position tool changer and a complete CNC nesting solution for high-performance cutting and drilling capabilities. If you are looking to get high-quality woodworking capabilities, consider the HOLZHER Dynestic 7535 wood mill we have for sale. Contact us for further details. • Control: Beckhoff TwinCAT 2 (PC-based) • Software: WorkCentre, NC-Hops, Cabinet Control, CAMPUS v7 • Tool holder: HSK-F63 • Tool changer: 18 positions (gantry-mounted) • Drilling unit: 10 vertical, 3 horizontal (4 X, 2 Y) • Saw unit: Groove saw integrated in X direction Crodpfx Akozgvy Detsi • Table type: Matrix table (gantry construction) • Automatic tool measurement: up to Ø20 mm • Power: 22 kW • CE marked • Key features: Complete CNC nesting solution; high-performance cutting and drilling; advanced control with DXF compatibility; auto lubrication and cooling system; offline programming capability included Mechanical and electrical decommissioning, as well as installation support • Basic application training (HOPS), depending on the operator’s experience • After-sales service, including warranty and potential service interventions handled by the seller (T&Cs apply)Please feel free to ask us for detailed pricing regarding these additional services. Additional equipment • Vacuum system: Becker, 250 m³/h • Air cushion table for easy material handling • Zoned safety mats for safe loading during operation • Additional saw blade holder (up to Ø350 mm) In

Condition: good (used), Year of construction: 2003, machine/vehicle number: 694/0-302 (2003), functionality: fully functional, operating hours: 2,580 h, power: 12 kW (16.32 HP), workpiece height (max.): 48 mm, workpiece width (max.): 60 mm, edge thickness (max.): 15 mm, height adjustment type: electric, feed rate X-axis: 11 m/min, overall weight: 2,000 kg, Equipment: documentation/manual, Holzher Sprint 1417, year of manufacture 2003 - Only 160,000 linear meters run, very good condition - - Can also be operated separately without Ligmatech - - Ideal for high-quality furniture production, HPL and matte decors are no problem - Crjdpfx Akez Dxh Netji Machine completely controlled by PLC, almost everything can be adjusted on the control panel, no defects, well-maintained machine used with expertise. Leuco Z3 jointing cutter installed, 2nd set of cutters available, various indexable inserts available. Board thickness max. approx. 48 mm, edge banding from 0.3-15 mm possible. Chain conveyor renewed approximately 10 years ago. Spray system for release and cleaning agents, controlled by demand. - Jointing fence motor-controlled and programmable. - Jointing cutters 1961, 2 x 2.0 kW - Glue system cartridge 1906, with sensing nozzle (important), cartridge magazine for 4 cartridges, color change easily possible, PU also possible. - Pressure unit 1903 MOT, pressure of the 1st and other rollers can be adjusted separately. - Miter saws 1918, bevel cuts adjustable. - Flush trimming 1823 - Radius trimming 1942 MOT (one axis motor-adjustable for 1 and 2 mm edges, selectable on the control panel) - Profile trimming blade 2 mm 1929 pneumatically controlled. - Corner copying unit 1983 carbide-tipped, with adjustment on the control panel, functional, but needs to be fine-tuned again. - Flat trimming blade 1964 - Oscillating unit controlled by demand. Includes all operating manuals, documentation of the process steps digitally and in printed form by Holzher technicians. One set of DIA jointing cutters is included, as well as various indexable inserts for the cutting units. Return conveyor system ZHR 15 Boomerang, year of manufacture 1995. Mounted on the machine with coupling to the pressure bridge. Easily adjustable from the control panel, with rotating device for components. Adjusted to the feed rate, sensors still available from HOMAG. - Information without guarantee, the parties agree that the sale of the used machine takes place with complete exclusion of any warranty, guarantee and liability for defects. The buyer has inspected and tested the machine before purchase. - Sale only to commercial businesses, machine currently powered and in operation. Price negotiable. Machine available after clarification in December / January 2027. Crane loading or forklift loading also possible from an external warehouse.

Condition: excellent (used), Excellent condition, only 600 operating hours, 1402 DS model. Crsdpezzkh Eefx Aktoi

Condition: used, Year of construction: 2017, Direct Numerical Control NC HOPS with Campus software Working range in X axis mm 3400 Working field in Y axis mm 1600 Working field in Z mm 300 Worktop with 6 adjustable bars No. 3 suction cups each work bar for holding the piece being processed N° 1 5-axis electrospindle, 10 KW, with automatic tool change, Hsk F63 type cones Boring head with 24 spindles as follows: N. 12 Y-axis vertical spindles N. 6 X-axis vertical spindles N. 4 horizontal spindles Y axis N. 2 X-axis horizontal spindles Automatic tool change system with 18 positions - positioned on the back of the machine Frontal protection and safety system with carpets and perimeter nets Automatic lubrication system Air conditioning system for the switchboard No. 1 vacuum pump Credpjwwiybefx Aktoi

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, This vertical machining center, including the "Clamex unit," is for sale and has only a few operating hours. The machine is being sold because we have switched to a nesting machine. In 2021, the machine was upgraded with a more powerful vacuum pump (16.3 m³). The machine also includes various vacuum clamping devices; we purchased several larger plates in addition to the standard equipment. Workpiece size: X = 200 - 3200 mm (longer with additional support) Y = 70 - 1200 mm (= max. clearance) Material thickness: Z = 8 to 70 mm Max. contour milling dimension in the X-direction without clamping: X = 1500 mm Max. contour milling dimension in the Y-direction: Y = 985 mm ./. milling cutter radius Max. drilling dimension horizontally in the X-direction: H = 1168 mm Z-axis travel: Z = 240 mm Maximum programmable speed: Vector speed: 68 m/min X = 25 m/min, Y = 60 m/min, Z = 20 m/min Milling head 7830, power: 7.5 kW (S6), air-cooled with HSK-F 63 tool holder n(max.) = 1000 - 24,000 min-1, continuously adjustable with collet chuck with HSK shank, ceramic ball bearings (hybrid bearing), tool weight max. 6 kg (incl. holder) Tools: max. Ø 110 mm, tool length max. 80 mm Tool changer 7887, 6-position magazine - pick-up system, pneumatic Max. Ø tool: Ø 110 mm Maximum tool weight: > 5 kg per tool or 30 kg when fully loaded Can be equipped with collet chuck with HSK shank Tool changer 7874, 1-position aggregate magazine, swiveling in X and Y direction, only for special bevel gear 7869 with HSK holder Vertical spindles can be individually activated Arrangement in L-shape, 5 in X and 4(5) in Y direction 32 mm grid Max. drill diameter: 35 mm Total drill length: 70 mm from the mounting end (depending on plate thickness) Spindle extension stroke: 70 mm Rotation direction: Alternating clockwise/counterclockwise n(max.) 1000 - 4400 min-1, continuously adjustable Holder: M 10 thread - interference fit 11 mm without tool, without holder 6 horizontal spindles 2 double drilling spindles in X direction 1 double drilling spindle in Y direction Holder: M 10 thread, interference fit 11 mm Total drill length max. 63 mm from the mounting end without tool, without holder Sawing unit Integrated sawing unit for sawing/grooving in X direction Crodpfxsz In Ugo Aktji n(max.) 1000 - 5650 min-1, continuously adjustable Tool holder: A max Ø = 120 mm, I Ø = 20 mm, B = max. 4.0 mm 4-axis "CLAMEX" tool set - Includes original tool set consisting of 2 pcs. P-system grooving cutter, DP (diamond) 100.4x7x30mm, Z3, NLA 4/6,6/48mm 1 pc. Milling mandrel for P-system grooving cutter S20x50mm, d=30, L=102, DTK 48mm 1 pc. Milling mandrel for P-system grooving cutter S16x55mm, d=30, L=68, DTK 48mm 1 pc. CNC drill 6mm for Clamex P L= 57.5 / shank 10x27 / left 1 pc. Adapter for drill with shank d= 10 mm (left) 1 pc. Collet DIN 6388 form B, double slit, size 25 Clamping diameter 20, for HSK-F 63 holders Drilling unit: Drill Ø5, 6, 8 mm 35mm pot band 20mm countersink Drill horizontally + vertically: 8mm Milling cutters: 8mm Dia NL32mm 16mm Dia NL43mm 16mm Dia NL9mm 20mm insert NL55mm

Condition: used, Year of construction: 2014, Processing length 3200 mm. Vertical machining center for drilling, milling, and grooving. Maximum flexibility and versatile applications with minimal space requirements. Modern industrial design, built with high-quality components, offering an optimal view of the machining process and perfect access to the tools. Machine frame in welded construction with ground and hardened prism guides. Ball screw spindles in the X, Y, and Z axes for precise positioning and perfectly fitting workpieces. Workpiece-friendly clamping system using vacuum cups with automatic cup positioning. Extremely short setup times. Workpiece fixing on the back allows machining of the entire circumference without additional re-clamping (up to workpiece lengths of 1300 mm). This ensures the fastest machining cycles and the highest accuracy. Program-controlled adjustment of workpiece thickness; material thicknesses from 8 to 70 mm are possible. 1 machining field with length stop. Material support. 1 roller track for supporting the workpieces downwards. 4 roller tracks for gentle support of sheet material. Height-adjustable infeed roller track for 4-sided milling. Complete finishing of the workpieces through precise milling of all 4 workpiece edges. Extraction: Machining head extraction with extraction nozzle Ø 120 mm and extraction nozzle in front of the drilling head Ø 140 mm, both leading upwards. Underfloor extraction with extraction nozzle Ø 120 mm; connection at the bottom on the left side or from the top of the machine. Safety guard according to CE standard. Enclosing guard with viewing window and safety interlock on the door. Cjdpfx Ako Ahhmbetori TECHNICAL DATA Workpiece size: X = 200 - 3200 mm (longer with additional support); Y = 70 - 920 mm. Material thickness: Z = 8 to 70 mm. Max. travel in X-direction without reclamping: X = 1500 mm. Z-travel: Z = 240 mm. Maximum programmable speed: Vector speed: 68 m/min; X = 25 m/min, Y = 60 m/min, Z = 20 m/min. MACHINE OPERATION / SOFTWARE CAMPUS V6 - Single Evolution. Software for CNC machines of the Evolution type with automatic generation of the division of workpieces for machining. 1 software license for the machine - secured via a license plug. Consisting of: 1. CAMPUS NC-HOPS; 2. CAMPUS aCADemy; 3. CAMPUS MT-Manager; 4. CAMPUS Workcenter; 5. CAMPUS process simulation. CAMPUS NC-HOPS: Graphical variant system with WOP and CAD/CAM features for creating part variants and macro technology. CONTROL PC control. Remote maintenance: Integrated network card for data transfer of control and program data. Data transfer takes place via a high-speed internet connection. Requirement: High-speed internet connection at the machine. The use within the warranty period for warranty cases is free of charge. 19" flat screen for easy and clear machine operation. USB port for data backup or for direct input of machining programs at the control panel. DRILLING UNIT Drilling unit 7883, 15 spindles. Drive power 1.7 kW. 9 vertical spindles, individually selectable. Arrangement in L-shape, 5 in X and 4(5) in Y direction, 32 mm pitch. Max. drilling diameter: 35 mm. Total drill length: 70 mm from the mounting end (depending on plate thickness). Spindle extension stroke: 70 mm. Rotation direction: Alternating right/left. n(max.) 1000 - 4400 min-1, continuously adjustable. Mounting: M 10 thread - 11 mm smooth shank, without tool, without chuck. 6 horizontal spindles. 2 double drilling spindles in X direction. 1 double drilling spindle in Y direction. Mounting: M 10

Condition: good (used), Year of construction: 2023, functionality: fully functional, operating hours: 59,000 h, input voltage: 400 V, input frequency: 60 Hz, type of input current: three-phase, workpiece height (max.): 50 mm, edge thickness (max.): 5 mm, actuation type: electric, total height: 2,000 mm, total length: 3,095 mm, total width: 1,330 mm, overall weight: 700 kg, Equipment: documentation/manual, 2023 Good condition For inquiries, please contact: Gergely Repka 06707739050 Professional edge banding machine suitable for edge sealing and post-processing of panel-format sheet materials. It can be used for particleboard, MDF, furniture board, table tops, etc. Key technical data: * Coil edge banding: 0.4–3 mm * Strip edge banding: 0.4–5 mm * Maximum edge height: 55 mm * Processable sheet thickness: 8–50 mm * Edge banding cross-section: max. 5 × 50 mm (material-dependent) * Minimum workpiece width: 70 mm * Minimum workpiece length: 180 / 210 mm * Feed speed: 9 m/min * Manually adjustable pressure beam * Extendable workpiece support with 500 mm distance Equipment: * Edge Control BC15 control system with a 15.6" touchscreen * Vi.se. (Visual Setting) digital setting system for quick and accurate machine adjustment * FG101 pre-milling unit with 2 diamond milling heads * MG101 edge feeding unit * Glu Jet GJ101 hybrid adhesive technology (2.3 kW / 50 Hz) with automatic adhesive height adjustment * 1.4 kg adhesive tank (for 4 cartridges) * Glu Jet cleaning tank * Automatic refilling system * DW101 pressing unit * KA101 pneumatic end trimming unit, 1 motor version * 0.22 kW * 12,000 rpm * FR101 profile smoothing unit * chamfering and radius function * 2 × 0.37 kW * 12,000 rpm * 2 replaceable HW milling heads Ø75, Z4, R2 * FF101 corner rounding unit with dual linear guide * ZK101 scraping unit R=2.0 mm * Chip collection system Csdpfx Akszi Am Nstori * FK101 surface scraper unit * SW101 polishing unit * 2 × 0.13 kW * 1,400 rpm * 2 textile polishing discs, 120 mm * Adjustable from 0–5° * TR101 spraying unit for infeed and outfeed sides

Condition: used, Year of construction: 2007, functionality: fully functional, Equipment: CE marking, documentation/manual, Holz-Her Sprint 1317 Edge Banding Machine Manufacturer: Holz-Her Model: Sprint 1317 Year of Manufacture: 2007 Equipment • Pre-milling unit • Gluing unit • Roller magazine for roller edges Crodsz R A U Ijpfx Aktsi • Automatic trimming • Multi-milling unit (flush trimming / radius milling / chamfering) • Corner rounding unit • Profile scraping blade • Surface scraping blade • Polishing unit • Automatic unit adjustment • Control panel with operating panel • 400 V connection Technical Data • Workpiece height up to 60 mm • Roller edges up to 3 mm • Edges up to 8 mm • Feed rate up to 18 m/min • Minimum workpiece length 180 mm • Minimum workpiece width 60 mm Description For sale is a Holz-Her Sprint 1317 edge banding machine in very good condition. The machine has extensive equipment for professional edge processing and impresses with its robust construction and precise processing results. Processing sequence • Pre-milling • Glue application • Roller edge banding • Automatic trimming • Flush and radius milling • Corner rounding • Profile scraping blade • Surface scraping blade • Polishing The machine was in use until recently and can be inspected by appointment.

Condition: used, HolzHer 7023 K CNC machining center Credpfx Akjz Nh Tgetoi Year of manufacture: 2008 Power supply: 3 x 400 V Traversing system (beams and suction cups) with 6 beams, Tool magazine for 12 positions, 3-axis milling motor, Drilling head, Horizontal milling motor (for doors).

Condition: used, Year of construction: 2017, Used machine Year of manufacture: 2017 Condition: Functionally tested Equipment and technical data: Cutting length: 4,300 mm Cutting height: 2,200 mm (edge trimming height 2,100 mm) Cods Adv Rzepfx Aktsri Saw unit 4 kW TRK device Manual length stop Middle support, fold-out, continuous Location: NRW (North Rhine-Westphalia) Availability: Short-term

Condition: excellent (used), Year of construction: 2005, machine/vehicle number: 340-0 / 511, functionality: fully functional, Machine available from November 2026 Sold on behalf of a customer Workpiece length min. 180 mm Workpiece width min. 60 mm Edge thickness (coil stock) 0.4 - 3 mm Edge thickness (strip stock) max. 15 mm - Multi-edge magazine (Ostermann) - 1888 Control panel - Motor-adjustable infeed guide, PLC controlled - 1961 Pre-milling unit - 1901 Edge magazine, fully automatic - 1905 Glue station for granules & cartridge with storage hopper Processing of EVA & PUR adhesives - 1913 Pressing unit with pneumatic, adjustable pressure. Adjustment based on edge thickness, motor-driven, PLC controlled - 1918 Trimming unit 2, motor-driven, pneumatic adjustment 0 - 12° - 1823 Flush trimming unit, up to 15 mm - 1942 Multi-milling unit, flush, chamfer, radius, pneumatic - motor-driven, PLC controlled - 1983 Corner rounding unit - 1929 Radius scraping unit - 1964 Surface scraping unit - 1940 Buffing unit - 1856 Spraying system, front for release agent, rear for cleaning agent - Extendable support - Dimensions L/W/H 5920 / 1250 / 2170 - Weight approx. 1825 kg Cjdpfxoz Hpi Aj Aktsri