Used Holzher 1405 for sale (170)

Condition: good (used), Roofing nails, strip nails, nail strips, roofing nail rolls, coil roofing nails -Manufacturer: Holz-Her, Roofing nails, nail rolls, 1 carton/ approx. 7200 pieces -Type: 3.0x22 A2 stainless steel -Price/Sale: complete -Dimensions: 490/300/H140 mm Hfodpfsv D U Ekex Ahash -Total weight: 12.6 kg

Condition: used, Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -Sale: Handover in the current condition as seen -Case: slight damage, see photos -Trimming unit: for trimming the protruding edges on the front and rear edge -Adjustment range: 400 to 840 mm -Clamping: pneumatic Hodpfx Ahogyg Arsaofh -Motors: Holz-Her 750 W / 2600 rpm -Saw blade: Ø 160 mm -Dimensions: 1010/450 / H540 mm -Weight: 94 kg

Condition: used, Electric motor, three-phase motor -Manufacturer: Holz-Her, electric motor type 80S-4 -Power: 550 W -Speed: 1350 rpm -Shaft: Ø 19 x 40 mm -Construction: B3 Hfjdpjg Ehagsfx Ahajh -Dimensions: 270/210 / H160 mm -Weight: 8.5 kg

Condition: used, Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -Number: 1x motor -Motor type: -Power: kW -Voltage: 380 volts -Tool holder: SK40 -Spindle speed: 9000 rpm Hedpfoc Iprfsx Ahaefh -Dimensions: 340/270/H400 mm -Weight: 35 kg

Condition: used, Year of construction: 1997, Used machine Year of manufacture: 1997 Condition: well-maintained Equipment and technical data: Machine with PLC control Feed speed: 12/16 m/min Edge feed for roll and strip material, automatic 1901 Glue application cartridge 1906 with sensing nozzle Pressure unit pneumatic, motorized adjustment to edge thickness 1926 End trimming unit, twin-motor, pneumatically tiltable 1918 Milling unit, fixed up to 30 mm 1962 Milling unit MOT 5 with multifunctional flush, radius, bevel 1966 Radius scraper 1927 Corner copying 1983 Surface scraper 1964 Buffing unit 1944 Air blow nozzles Technical data: Workpiece thickness min./max.: 6/60 mm Workpiece width min.: 60 mm Workpiece length min.: 140 mm Edging thickness max.: 13 mm Hfsdpfxoyamcwo Ahaeh Weight: 1,350 kg Machine dimensions: 5,850 x 1,000 x 1,750 mm Location: Röllbach Availability: short-term

Condition: used, used, in good condition overhauled, with 4 new feed rollers Make: Holz-Her Model: ETZ Machine no.: 47884 Pole-changing motor with 2 speeds Roller diameter: 110 mm Roller width: 50 mm Feed rollers: 4 pieces with stand Speeds: 2-30 m/min., 4-speed selectable Space requirement approx. 1200x600x700 mm Hodpfsyvvtfjx Ahajfh Weight approx. 60 kg Total connected load: 0.75 kW Storage location: 97447 Gerolzhofen, free loaded, unpacked Handed over in current condition, as inspected, functionally tested, without warranty or guarantee

Condition: good (used), Chip extraction, filter extraction, bagging filter -Drive: 0.96 kW Hsdpfx Ahjb A E Uhjaefh -Speed: 2800 rpm -Connection: Ø 50 mm -Connection: 380 V -Dimensions: 780/470/H340 mm -Weight: 135 kg

Condition: used, Year of construction: 2004, Used machine Year of manufacture: 2004 Condition: Functionally tested Equipment and technical data: Hfsdpfxox Enqbs Ahaoh Travel distances: - X-axis: 2,685 mm - Y-axis: 1,095 mm - Z-axis: 140 mm Milling aggregate: - 6 kW, water-cooled - Tool holder HSK 63 F - Speed 1,000 - 18,000 rpm - Tool changer: 6-position, lateral Drilling head: - 9 vertical drilling spindles at 32 mm pitch - Horizontal drilling spindle: 1+1 - Vertical drilling spindle: 1+1 Grooving saw: in X direction Control: Twin CAM 32 Vacuum pump: 100 m³/h Including vacuum suction cups Dimensions: 5200 x 2843 x 1855 mm Weight: approx. 3,500 kg Availability: as agreed Storage location: Lower Saxony

Condition: used, Used, good condition, low hours Manufacturer: Holz-Her Model: ETZ117 Machine No.: 6999 Motor: pole-changing, 2 speeds Hfodjyu U Ecepfx Ahash Roller diameter: 110 mm Roller width: 50 mm Feed rollers: 3 pieces with stand 8 speeds, 4-position switchable Weight approx. 60 kg Location: 97447 Gerolzhofen, loaded free, unpacked Sold as is, as inspected, function tested, no overhaul, no guarantee or warranty.

Condition: used, Year of construction: 2016, CNC machining center Holzher Evolution 7405 for sale, year 2016, in excellent condition, located in Serbia. This high-performance machine is designed for precise processing of furniture components and other wooden materials, making it ideal for professional workshops and production. Technical specifications: Model: Holzher Evolution 7405 Year: 2016 Type: CNC machining center for wood Hfjdpfoyyxutsx Ahaoh Condition: Excellent, regularly maintained Location: Serbia Advantages and description: Multi-axis precision machining of components High productivity and reliability Suitable for the professional furniture industry Easy operation and programming

Condition: used, Year of construction: 2001, Used machine Year of manufacture: 2001 Condition: Function tested Equipment and technical data: Hfodsw I Ug Hspfx Ahajh Milling unit: 4.4 kW Tool holder: HSK 63 F Speed: 1,000 - 18,000 rpm Water-cooled Tool changer: 4-position, lateral Drilling head: 9 vertical drilling spindles on a 32 mm pitch Horizontal drilling spindle: 1+1 Vertical drilling spindle: 1+1 Grooving saw in X-direction Control: Twin CAM 32 Vacuum pump: 40 cbm/h Including vacuum suction cups Travel paths: X-axis: 2,685 mm Y-axis: 1,095 mm Z-axis: 140 mm Weight: approx. 3,500 kg The machine is completely checked for all mechanical, electrical, and electronic components and overhauled where necessary. All guides checked; console guides replaced New PC control system for the TWIN CAM control All axis modules checked and serviced Location: Flörsheim Availability: by arrangement

Condition: used, Used machine Equipment and technical specifications: Hfodjw Nad Hopfx Ahajh Automatic edge feeder Cartridge glue system 4-roll printing unit Cross-cut saw unit Flush trimming unit Combination trimming unit: flush/bevel/radius Radius scraper Buffing unit Edge band thickness 0.3 - 20 mm (depending on unit) Edge band height max. 66 mm Edge band length min. 200 mm Feed rate 8/16 or 12/24 m/min With LIGMATECH workpiece return system The return line of this return system is located above the panel processing level. The workpieces move back to the operator on an inclined plane. Special features compared to the ZHR 0x models: Automatic detection and rotation of parts from transverse to longitudinal Automatic adjustment of the rotation speed to the workpiece length Minimum and maximum workpiece dimensions For longitudinal edge processing: 2200 x 1000 For transverse processing with subsequent rotation: 250 x 120/2200 x 800 Maximum workpiece thickness: 60 mm Location: Bavaria Availability: Short-term

Condition: new, Year of construction: 2025, New Machine Year of manufacture: 2025 Equipment and technical specifications: - Base unit: Vertical panel saw SECTOR 1257, cutting height 2200 mm x cutting length 5300 mm - PowerPackage 400V incl. TRK extraction system, SuperCut scoring unit, digital vertical readout, stepless speed control (9 kW power) - Strip stop for repeat horizontal cuts, millimeter scale, max. strip height 650 mm - Alignment laser - Cut optimization package incl. touchscreen on operator panel Hfodpfxew Tfxwe Ahaoh Availability: Short-term Location: Flörsheim

Condition: used, Year of construction: 2004, Used machine Year of manufacture: 2004 Equipment and technical data: Edge feed for rolls and strips Joining milling unit with 2 milling heads Adhesive application system cartridge 3-roll printing unit Cross-cut saw unit Radius milling unit Radius scraper unit Corner copying unit Surface scraper Buffing unit Workpiece thickness min./max.: 6/50 mm Edging thickness: 0.4-15 mm Edging height max.: 55 mm Edging length strip min.: 350 mm Edging projection per side max.: 3 mm Workpiece width min.: 60 mm Workpiece length min.: 180 mm Feed speed: 12.5 m/min. Machine dimensions L x W x H 6480 x 1250 x 1690 mm Availability: short term Hfjdjvymdqjpfx Ahaoh Storage location: Flörsheim

Condition: new, Year of construction: 2025, Showroom machine Year of manufacture: 2025 Features and technical specifications: - Base machine DYNESTIC 7507 10.57 push - Upgrade from BetterNest rectangular nesting to: CAMPUS BetterNest freeform nesting software - Uninterruptible Power Supply - UPS (ZB27) - Touchtool tool length measurement - 10.3 kW router spindle - Drilling unit with 14 spindles - 1 additional machining field (Field A) at the rear with 1 stop, height 70 mm, pneumatically retractable - 2 electronically monitored side stops at the front, Field A + D, in X-direction for the front stop row (BF8) - 10-position tool changer 7873 - Tool changer 7872, one-position aggregate magazine, pivotable in X and Y direction for Clamex aggregate - 2 x 140 m³/h and 1 x 250 m³/h dry-running vacuum pumps, 400 V - 16-circuit vacuum system (VF16) - software controlled, incl. additional 25 meters sealing cord - Laser pointer - red (one laser pointer) Field D (ZB8) for positioning of vacuum suction cups or tracing the workpiece contour - Automatic central lubrication - Vacuum suction cups for smooth table surfaces, complete, 140x115 mm, height 30 mm with connecting hose - Thin sheet ejector as an addition to the ejector for special materials below 4 mm material thickness and standard wood-based materials under 2 mm Hfjdpfxjxc Rmke Ahajh - Complete conveyor belt, pusher conveyor belt, pusher table - TouchLabel PRO - touchscreen and label printer mounted on stand - Production control computer NEXTEC 4.0 - Extraction funnel at the end of the pusher conveyor belt - Availability: by arrangement - Location: Flörsheim

Condition: used, Holz Her STREAMER 1057 FÜ + PU Edge thickness: 0.4 - 6 mm Modern control system with selector switch for aggregate adjustment Pre-milling unit for precise workpiece preparation before the gluing section Fully automatic edge magazine for coil and strip materials GLU-JET cartridge adhesive application station + PU gluing Adhesive application via nozzle technology Workpiece height: 6–60 mm Automatic glue height adjustment High-quality 3-roller pressure unit, 1st roller motorized Pneumatic end trimming unit for coil and strip material up to 6 mm edge thickness With pneumatic adjustment for 0–10° inclination of the end saws Milling unit for flush trimming up to 6 mm, radius milling and bevel milling up to 15° Corner rounding unit for edges up to 3 mm thickness Scraper unit for bevels and radii, equipped with 2 scraper holders Flat scraper unit for finishing Spraying device – PU Hsdpfx Ahjyg H Hisaofh Machine equipped with all processing tools Machine is WORKSHOP-TESTED and in TOP CONDITION Available from stock in Lieboch

Condition: like new (used), Year of construction: 2004, I sell the panel beam saw HOLZ-HER CUT85. Year 2004. Hedpjppwtvjfx Ahasfh Cutting size 3200x3200mm. Cutting height 85mm. Max saw blade diameters 350 + 180mm Main motor 11kW Scoring motor 2,2kW Total power 15kW Total area covered W.5636mm x D.6520mm 6 pcs. gripper with pneumatic regulation Side alignment top roller with pneumatic stroke. Optimising software included. Label printing included. Very good condition. Available immediately.

Condition: ready for operation (used), Year of construction: 2011, machine/vehicle number: 55/1-105 15501954 BAZ11V3, functionality: fully functional, operating hours: 25,996 h, travel distance X-axis: 6,566 mm, travel distance Y-axis: 1,800 mm, travel distance Z-axis: 445 mm, number of slots in tool magazine: 24, spindle speed (max.): 6,500 rpm, No minimum price – guaranteed sale to the highest bidder! Machine already dismantled TECHNICAL DETAILS Workpiece dimensions for cutting (without cutter radius): 6,225 x 1,595 mm Travel range X: 6,566 mm Travel range Y: 1,800 mm Travel range Z: 445 mm Vertical clearance standard consoles – 1st stroke: 498 mm Vertical clearance standard consoles – 2nd stroke: 598 mm Vertical clearance Vario table – 1st stroke: 445 mm Vertical clearance Vario table – 2nd stroke: 545 mm Speed Programmable vector speed: 142.0 m/min Speed X: 100 m/min Speed Y: 100 m/min Speed Z: 25 m/min Drilling unit Type: Drilling unit 7976, 24 spindles Drive power: 3.0 kW Vertical spindles Number: 18, selectable individually Arrangement: L-shape (10 in X axis, 8 in Y axis) Spindle pitch: 32 mm Max. drilling diameter: 35 mm Total drill length: 70 mm (from screw end, depending on panel thickness) Spindle stroke: 70 mm Rotation direction: alternating right-/left-hand Speed range (stepless): 1,000 – 6,500 rpm Connection: M10 thread – press-fit 11 mm Horizontal spindles Number: 6 In X axis: 2 double drilling spindles Spindle pitch (X axis): 32 mm In Y axis: 1 double drilling spindle Connection: M10 thread – press-fit 11 mm Total drill length: 70 mm (from screw end) Consoles & suction cups (VarioTable) Number of consoles (automatic positioning): 6 Work consoles (automatic, X direction): 5, in zones A + D Suction cup holders per console (automatic, Y direction): 3 Vacuum suction cup per holder: 1, 80 x 80 mm with plunger valve Suction cover per holder: 1 Loading aids: 4 Rear positioning pin per console: 1 Note: Only 5 out of 10 consoles function correctly Saw unit / change-over unit Central unit: Central gearbox 7955, for saws (mainly solid wood) Tool holder: HSK-F 63 Max. output speed: 6,750 rpm Hodjwvi Icepfx Ahaefh Number of spindles: 1 Max. saw blade diameter: 220 mm Saw blade bore: 30 mm Driving pins: 2 x Ø 6 mm Clamp cover: self-locking Lubrication: oil sump lubrication MACHINE DETAILS Operating hours: 25,996 h Number of switching cycles: 965 x EQUIPMENT - Drilling unit with 24 spindles (vertical and horizontal) - VarioTable with automatically positionable consoles and suction cups - 4 loading aids - Center unit for sawing with HSK-F 63 holder - Saw blade holder up to Ø 220 mm with oil sump lubrication - New pump installed - Only 5 out of 10 consoles fully operational – long workpieces can still be held without problems - No tools included in delivery

Condition: used, Holz Her Accura 1556 Premium fully equipped, modern edge banding machine First delivered in 2021 Machine is in EXCELLENT CONDITION Available from stock in Lieboch Hfjdjyfndajpfx Ahaoh

Condition: used, Year of construction: 2005, Used machine Year of manufacture: 2005 Equipment and technical data: Travel paths: - X-axis: 2,685 mm - Y-axis: 1,095 mm - Z-axis: 140 mm Milling unit: - 6 kW, water-cooled - Tool holder: HSK 63 F - Speed: 1,000 - 18,000 rpm Hodpfowka H Ejx Ahaefh Tool changer: 6-position, side-mounted Drilling head: - 9 vertical drilling spindles, 32 mm pitch - Horizontal spindle: 1+1 - Vertical spindle: 1+1 Grooving saw in X direction Control: Twin CAM 32 Vacuum pump: 100 m³/h Includes vacuum suction cups Dimensions: 5,200 x 2,843 x 1,855 mm Weight: approx. 3,500 kg Availability: by arrangement Storage location: Röllbach

Condition: used, Year of construction: 2007, Used machine Year of manufacture: 2007 Equipment and technical data: Nesting system with grid table Processing dimensions: - X: 5000 mm - Y: 1240 mm - Z: 135 mm Traverse paths: - X: 5665 mm - Y: 1650 mm - Z: 325 mm with milling unit 7933: - Motor 11 kW (S6) - HSK 63 - water-cooled with C-axis with 18-position disc tool changer with vacuum pump 250 m³ with handheld control device Hjdpfx Ahowka Ipsasfh with central lubrication with minimum quantity lubrication system Availability: short-term Location: Röllbach

Condition: used, Year of construction: 2012, Used Machine Year of Manufacture: 2012 Base Machine - Dynestic 7521 20.6 Dynestic Table For classic nesting processing with wear plate Processing length 6250 mm (DYNESTIC 20.6 comes with additional 4th stop in Y already included) Machine frame in welded construction with ground and hardened prism guides for the gantry, unit head, and consoles Gantry-type design Rack and pinion drive, helical-toothed, in X and Y directions, Ball screw spindle in Z direction for precise positioning Technical Data: The technical data refers to the DYNESTIC 7521 - 20.6 Please refer to the respective datasheets. Processing Dimensions: Max. workpiece size for trimming: X = 6250 mm Y = 2100 mm Max. travel distances: X = 7360 mm Y = 2720 mm Z = 325 mm Max. clearance height on DYNESTIC table: Z = 1st level 318 mm / 2nd level 418 mm Hjdpfew I U Ecsx Ahajfh from table surface (without tool, without holder) Maximum programmable speed: Vector speed: 128.0 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min 4-stage extraction hood with pneumatic height adjustment and observation window Voltage 400 V, 50/60 Hz CONTROL: Dual-core processor Operating system Windows XP 80 GB hard disk / 1 GB RAM RJ45 network port 10/100 Base-T Fast Ethernet US keyboard and Microsoft IntelliEye mouse (optical) CD-ROM / CD-RW drive (CD writer) Remote maintenance Integrated network card for transmission of control and program data. Data transfer via high-speed internet connection required. Requirement: High-speed internet connection at the machine. DYNESTIC Table Fixed, continuous processing table with grid layout, continuous grooves in X and Y direction, distance between grooves 50 mm with 25 meters of sealing cord for fixing the wear plate 1 processing field with stop rails / stop Height 30 mm, pneumatically retractable 2 stop rails each in Y-direction and 1 stop in X-direction right side (from machine front edge perspective) Vacuum Fields Single-circuit vacuum system Drilling Unit 7976, 24 spindles Motor power 3.0 kW 18 vertical spindles, individually selectable L-shaped arrangement: 10 in X and 8 in Y direction 32 mm grid Max. drill diameter: 35 mm Total drill length: 70 mm from mounting end (depending on board thickness) Spindle extension stroke: 70 mm Rotation: Alternating right/left n(max.) 1000 - 5710 rpm steplessly adjustable Mounting: M10 thread - 11 mm fitting Without tool, without holder 6 horizontal spindles 2 double drilling spindles in X-direction (Distance 32 mm between 1st and 2nd horizontal spindle) 1 double drilling spindle in Y-direction Mounting: M10 thread, 11 mm fitting Max. total drill length 70 mm from mounting end Without tool, without holder Free slot 1 for: Optional double drilling spindle in X-direction or Vertical adapter with double pressing force Free slot 2 for: Optional saw in X-direction or Vertical adapter with double pressing force Milling Unit 7831, 2-stage Power: 11.0 kW (S6) n(max.) = 1000 - 24000 rpm, steplessly adjustable, two-stage feed stroke max. power at 12000 rpm to 24000 rpm Air-cooled with HSK-F 63 tool holder with right-hand rot...

Condition: excellent (used), functionality: fully functional, saw drive: 3,000 W, Holz-her 1220 automatic vertical panel saw. Hfodpfox Eyqyjx Ahaoh Multiple settings, half or whole board cutting. You can try it, it works well.

Condition: used, Holz Her Sprint 1312 FÜ + PU Heavy-duty design – edge thickness 0.4 - 12 mm PLC screen control Pre-milling unit for application before the gluing section Fully automatic edge magazine for roll and strip material Glue application station for cartridges + PU bonding Hedpjx Eilqofx Ahaefh automatic tracing nozzle Workpiece height 6-55 mm End trimming unit for roll and strip material up to 12 mm edge thickness with adjustment from 0-10° angle of the trimming saws Milling unit, flush milling up to 12 mm, radius milling – bevel milling - 15° motorised - 4 axes Scraper unit for bevels and radii with 2 pneumatically operated scraper holders pneumatic infeed and outfeed Flat scraper unit – finishing Spray device – PU Machine in TOP CONDITION Available from stock Lieboch

Condition: ready for operation (used), A vertical panel saw Holz-Her is available. Cutting length: 2200mm, cutting height: 30mm, number of saw blades: 3, saw blade diameter: 300mm, panel thickness: 0mm-30mm/30mm-70mm, clamping surface X/Y: 2200mm/5300mm, vertical stroke: 2200mm, horizontal stroke: 5300mm, speed: 4420rpm, machine dimensions X/Y: 6400mm/2900mm, weight: approx. 1000kg. Including 2x 3-part folding rails and 2x adjustable longitudinal stops with scales. Documentation available. On-site inspection is possible. Hsdpfxswftb Se Ahaofh