Used Holzher Sprint 1317 for sale (161)

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Edge Control control system with 18.5" touchscreen color monitor 16:9 Swiveling operator panel, Program storage, Motorized pressure bar adjustment, Feed via transport chain, Feed speed: 8-18 m/min Extendable workpiece support, Infeed fence with motorized adjustment Jointing unit 1961, Diamond jointing cutter for climb and counter rotation, Automatic adjustment to workpiece height Edge feed 1903 Pre-trimming up to 3 x 45 mm (depending on material) Glue application system 1905 Multi-System Automatic glue height adjustment with sensor nozzle, Pressure regulator for adjusting the cartridge contact pressure, Use of PUR adhesives possible, Pressure unit 1913 MOT, First roller driven End trimming unit 1918 with pneumatic adjustment End trim saw pneumatically swiveling, Multifunction unit 1824 MOT 4 Hjdpfx Ajv Sv Ensaqjw with multifunction cutter radii 1,2,3 mm Corner copying unit 1832 Corner copying up to 3 mm edge thickness Radius scraper 1929 MOT 2 With motorized adjustment of horizontal tracing rollers With pneumatic adjustment (top and bottom separate) Chip collection box for radius scraper, Surfacing scraper 1964 For removing glue residue for a clean glue line With extraction hoods Spray unit 1856 for infeed and outfeed area Buffing unit 1940 For finishing and edge polishing ----- Technical Data ----- Edge thickness roll material: 3 mm, Edge thickness strip material: 8 mm, Max edge thickness for corner copying: 3 mm, Workpiece thickness: 45 mm, Workpiece thickness for corner copying: 45 mm, Min. workpiece length: 180 mm, Feed speed: 8-18 m/min, Distance workpiece support: 470 mm, Support table diameter for edge material: 800 mm, End cut knife for coiled material up to: 3 mm, Heating time: 3.5 min, Jointing unit power: 2 x 2 kW, End trim saw power: 2 x 0.22 kW, Milling station power: 2 x 0.35 kW, Corner copying power: 0.22 kW, Extraction port jointing unit: 120 mm, Extraction port milling unit: 70 mm, Extraction port scraper unit: 70 mm, Total length: 5,350 mm, Dimensions (LxWxH): 5,350 x 1,669 x 1,940 mm Picture of operating hours taken from a recording in 2022 Availability: short term Location: Röllbach

Condition: used, Holz Her Sprint 1317-1 FÜ + PU Hedpfxewtz T Se Aaqew heavy-duty design – edge thickness 0.4 – 5 mm SPS screen control large LCD display pre-milling unit before gluing area fully automatic edge magazine for coil and strip material glue application station for cartridges + PU gluing maximum edge height 51 mm automatic glue height adjustment press unit 1913, motorized pneumatic trimming unit for coils and strips with pneumatic adjustment for miter saw angle from 0–10° multifunctional milling unit 1942 MOT 2 milling unit with motorized adjustment axes for various radii – chamfering – flush milling via SPS copy milling unit 1832 for corner copying up to R 3 mm + postforming up to R 6 mm scraping unit for chamfers and radii pneumatic infeed and outfeed finish – surface scraper regular maintenance by Holz Her machine is FACTORY SERVICED, in EXCELLENT CONDITION available from stock in Lieboch

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, feed rate X-axis: 18 m/min, edge thickness (max.): 8 mm, product height (max.): 45 mm, product length (min.): 180 mm, TECHNICAL DETAILS Control: Edge Control with 18.5" touchscreen color screen (16:9) Control panel: Swiveling Program memory: Available Pressure bridge adjustment: Motorized Feed: Using a transport chain Feed speed: 8 - 18 m/min Workpiece support: Extendable Infeed ruler: Motorized adjustable Edge thickness of rolled goods: 3 mm Edge thickness of strip goods: 8 mm Maximum edge thickness for corner copying: 3 mm Workpiece thickness: 45 mm Workpiece thickness for corner copying: 45 mm Minimum workpiece length: 180 mm Distance between workpiece support: 470 mm Support plate Ø for edge material: 800 mm Milling and processing units Joining milling unit: 1961 Cutter type: Diamond jointing cutter in synchronous and counter-rotating motion Workpiece height adjustment: Automatic Edge feed & Glue application Edge feed: 1903 Pre-capping: Up to 3 x 45 mm (depending on material) Glue application system: 1905 Multi-System Glue height adjustment: Automatic with sensing nozzle Pressure regulator: For regulating the cartridge contact pressure PUR glue use: Possible Printing unit & cutting unit Printing unit: 1913 MOT Drive: 1st roller driven Cutting unit: 1918 with pneumatic adjustment Cutting saw: Pneumatically pivotable Milling and edge processing Multifunctional unit: 1824 MOT 4 Milling cutter: Multifunctional milling cutter radii 1,2,3 mm Corner copying unit: 1832 Corner copying function: Up to 3 mm edge thickness Radius scraper: 1929 MOT 2 Tactile roller adjustment: Motorized (horizontal) Pneumatic adjustment: Top and bottom separated Cleaning & polishing Chip collection box: For radius scraper Surface scraper: 1964 (for removing the adhesive residue for a clean adhesive joint) Extraction hoods: Available Spray device: 1856 for the inlet and outlet area Buffing unit: 1940 (for cleaning and polishing edges) Performance data & extraction Cutting knife for rolled goods up to: 3 mm Heating time: 3.5 min Power of jointing cutter: 2 x 2 kW Power of cross-cut saw: 2 x 0.22 kW Power of milling station: 2 x 0.35 kW Power of corner copying: 0.22 kW Extraction nozzle of jointing milling unit: 120 mm Extraction nozzle of milling unit: 70 mm Extraction nozzle of scraper unit: 70 mm MACHINE DETAILS Total length: 5,350 mm Dimensions (LxWxH): 5,350 x 1,669 x 1,940 mm EQUIPMENT - Swiveling control panel - Program memory - Motorized pressure bridge adjustment - Feed by means of transport chain - Extendable workpiece support - Motorized infeed ruler - Diamond jointing cutter in synchronous and counter-rotation - Automatic adjustment to workpiece height - Pre-cutting up to 3 x 45 mm (depending on material) - Glue application system with automatic glue height adjustment and sensing nozzle - Pressure regulator for cartridge contact pressure - PUR glue can be used - Printing unit with driven 1st roller - Cutting unit with pneumatic adjustment - Pneumatically swiveling cutting saw - Multifunctional unit for radii 1,2,3 mm - Corner copying unit up to 3 mm edge thickness - Radius scraper with motorized sensing roller adjustment - Chip collection box for radius scraper - Surface scraper for clean adhesive joint - Extraction hoods - Spray device for inlet and outlet area Hedjvzyblspfx Aaqsw - Buffing unit for cleaning and edge polishing

Condition: used, Year of construction: 2003, Used machine Year of construction: 2003 Equipment and technical data: Control unit with LCD display, Hjdpfx Ajwka Nyjaqjw swivel control panel, program memory, manual pressure bridge adjustment, Feed by means of transport chain, extendable workpiece support, Joint trimming unit 1961 2 x 2.0 kW Diamond jointing cutter in synchronous and counter-rotation, Edge magazine 1903 820 mm support plate, max. loading capacity 40 mm Automatic feeding of rolls and strips Adhesive application system 1906 Cartridge system with touch-sensitive nozzle, with automatic reloading PUR adhesives can be used, 1816 printing unit with driven roller, pneumatic control of the printing unit Cross-cut unit 1918 2 x 0.22 kW swivels from 0 to 10°, pneumatically adjustable Trimming unit 1942 MOT 2 for flush / radius and chamfer trimming motorized adjustment Blowing nozzle on the trimming unit, Corner copying unit 1832 corner copying up to 3 mm radius, postforming up to r = 6 mm Radius scraper unit 1929 MOT 2 Plastic edges up to 3 mm Chip catcher box for radius scraper, insert-controlled surface scraper, Blowing nozzle on the surface scraper Surface scraper 1964 Buffing unit 1940 ----- Technical data ----- Edge thickness of rolls: 3 mm, Edge thickness of strips: 5 mm max edge thickness corner copying: 3 mm, Workpiece thickness: 6/45 mm, Workpiece thickness corner copying: 45 mm, min. Workpiece length: 180 mm, feed speed: 8 m/min, Distance workpiece support: 470 mm, Support plate Ø for edge material: 800 mm, Cross-cut blade for roll material up to: 3 mm, Heating time: 3.5 min, Power of jointing cutter: 2 x 2 kW, Cross-cut saw power: 2 x 0.22 kW, Milling station power: 2 x 0.6 kW, Corner copying power: 0.22 kW, Extraction nozzle for jointing trimming unit: 120 mm, Extraction nozzle for trimming unit: 70 mm, Extraction nozzle for scraper unit: 70 mm, Total length: 5,350 mm Dimensions (LxWxH): 5,350 x 1,669 x 1,940 mm, Weight: 1,200 kg Location: Röllbach Availability: by arrangement

Condition: used, Year of construction: 2001, total length: 5,650 mm, total height: 1,750 mm, total width: 1,100 mm, Price: On request - Year: 2001 - Documentation available: No - Serial number: 468/0-103 - Transport dimensions: 5650mm x 1100mm x 1750mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Hsdpfxjxlqpde Aaqew Yorick Diebels

Condition: used, Year of construction: 2013, Used machine Year of manufacture: 2013 Equipment and technical data: The machine has been completely overhauled: - new Glue Jet 301 gluing system (top part 1 mm) - all units checked - all cutters sharpened - all knives replaced Electrics for stepless feed: 400 V / 50 Hz, 2.2 kW Motorized pressure bridge adjustment Automatic chain lubrication PPC 315 control system with 15" touchscreen ECO MODE energy saving function Infeed fence 1350 mm, motorized adjustment Jointing milling unit 1802: - 2 x 2.0 kW, 200 Hz, 12,000 rpm with 2 milling units for edge jointing - Cutter, diamond Ø 70 x 64 x 30 mm, Z2, left-hand rotation for jointing unit - Cutter, diamond Ø 70 x 64 x 30 mm, Z2, right-hand rotation for jointing unit Edge feeding unit 1901 fully automatic Hedpfxswka Iio Aaqsw Glue application station Glu Jet GJ301 automatic: - 2.3 kW; 50 Hz - Granulate hopper Pressure unit 1913 MOT End trimming unit 1918 (60 mm) pneumatic Multi-functional milling unit 1826 MOT4 (2 x 0.65 kW): - Air Stream System cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm left-hand rotation - Air Stream System cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm right-hand rotation Profile milling unit 1833 MOT4: - Cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 radius R = 2.5 mm, left-hand rotation with CM technology - Cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 radius R = 2.5 mm, right-hand rotation with CM technology Scraper unit 1929 MOT2: - HW reversible knives for scraper holder R = 2.5 mm (2 pcs required) Flat scraper 1964 Buffing unit 1940 (2 x 0.12 kW, 50 Hz, 1400 rpm) Availability: short notice Location: 65439 Flörsheim

Condition: excellent (used), Year of construction: 2015, HOLZ-HER Sprint 1329 - Used edge banding machine in good condition. - Year of manufacture: 2015 - Includes BARBARIC return conveyor (year: 2017) - Available from end of November/beginning of December 2025 Hjdpfx Aajxducrsqow Please feel free to contact us if you have any questions.

Condition: used, functionality: fully functional, Edge thickness 0.4 – 3 mm SPS screen control Fully automatic edge magazine Fully automatic roll magazine – cross-cut shears Cartridge + PU gluing station + automatic dosing nozzle Workpiece height 6 – 45 mm End trimming unit swivels at 0 and 10 degrees Flush, bevel, and radius milling, swivels up to 15 degrees Profile scraper Hedpfow Igg Sex Aaqew Buffing unit Soundproof cabin CE version Machine is FUNCTION-TESTED and in GOOD CONDITION ex works

Condition: used, Year of construction: 1999, Holz-Her SPRINT 1411 edgebander Description Workpiece thickness min./max. 6/45mm Automatic edge feeder (coil up to 5mm) Workpiece min. 60mm Workpiece length min. 180mm Cartridge glue system (short heat up time 2-3 min.) End trimming unit Flush trimming unit Scraping unit (flat) Hjdpfx Aaow Ebrxsqow Buffing (brushing) unit CE (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen vorbehalten! Keine Garantie auf gedruckte Daten!. Verfügbarkeit vorbehaltlich Zwischenverkauf).

Condition: good (used), Year of construction: 2000, I sell the edge banding machine Holz-Her Sprint 1417 year 2000: Hsdpfx Asd Nukqjaqew Premilling Edge banding patron glue End cutting saws Strong flat milling Tilting radius milling Radius scrapers Corner rounding 1-motor Glue scrapers Polishing brushes New sharpened tools, new display, fully working. CE Mark. Good condition. With full documentation.

Condition: reconditioned (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 315/0-110, Top control panel Edge feeding 1902 Hsdpfx Aoh Ux Suoaqjw Glue application station 1906 cross-cut shear 1902 Printing unit 1816 Cross-cut unit 1918 Trimming unit 1942M Rounding scraper 1929 Form milling unit 1983 Surface scraper 1964 Buffing unit 1940 Weight approx. 970 kg Compressed air connection 6 bar suction connection Ø 120 mm Length approx. 5300 mm

Condition: used, Year of construction: 2006, Used machine Year of construction 2006 completely overhauled with new glue application system Equipment: - Manually adjustable infeed guide - Trimming unit 1961 - Edge feeder 1903 - Glue application station 1906 with touch-sensitive nozzle - Pneumatic printing unit 1816 - Snipping unit 1822 - Trimming unit 1942 M radius, chamfer, flush Hodpfx Aswka H Soaqew - Blowing nozzle complete - Scraper unit 1929 - Chip catcher box - Surface scraper 1964 - Extraction hood set -- Complete protective hoods Technical data: Total length: 5291 mm Workpiece thickness: min. 6 / max. 50 mm Edge band thickness depending on assembly: 0.4-5 mm Max. edge band height: 55 mm Edge band length strips: min. 350 mm Edge band protrusion/height per side: max. 3 mm Workpiece width: min. 60 mm Workpiece length: min. 180 mm Feed speed: 12.5 m/min. Extraction: Joint trimming unit: 900 m³/h Milling unit: 280 m³/h Scraper unit: 280 m³/h Static negative pressure: Joint trimming unit: 1490 Pa Milling unit: 1650 Pa Min. air speed: 20 m /sec. Milling unit connection diameter: 70 mm Scraper connection diameter: 70 mm Compressed air: 6 bar Availability: approx. 2-3 weeks after receipt of order Location: Hochheim Hochheim

Condition: excellent (used), Year of construction: 2017, HOLZ-HER SPRINT 1329 edgebander Main Advantages and Features: ● Construction: Robustly built, stable form, and excellent vibration dampening. ● ● Control Panel: Intuitive panel with a 15-inch touchscreen monitor, allowing for easy input, storage, and display of processing data, as well as machine control. ● ● Automation: Automatically records information about used programs, processed item counts, and machine operating time. ● Quiet Operation and Safety: Noise-reducing protective covers minimize noise and enhance workplace safety. ● Programming: Programmed HOLZ HER control ensures full functionality of the edgebander, with the ability to run complete machining programs. ● Motorized Adjustment: Motorized adjustment of the height of the workpieces. ● Transport: Rollers at the infeed and outfeed of the machine. The machine's transport chain has automatic lubrication. Detailed Specifications and Equipment (Working Units): 1. Pre-milling Unit 1802 (2 x 2 kW, 12000 min⁻¹): ○ One synchronous and one counter-rotating unit with two K/F 70-64 30 diamond milling cutters. ○ Motorized adjustment of milling thickness (max 3 mm). 2. Edge Feeding Unit 1901 Synchro: ○ Allows for precise adjustment of the edge overhang, significantly contributing to edge savings. ○ Edge feeding from a single plate with a diameter of 820 mm. Loading width for strip edges: 40 mm. 3. Glue Jet 2.3 Gluing System (Patented System): ○ No glue roller – glue is applied via a nozzle. ○ Compatible with both EVA glues (granules and cartridges) and PUR glues. ○ Full adjustment of the start and end of glue application, as well as glue application height depending on the workpiece thickness. ○ Hybrid technology, heating time: 3-4 minutes. 4. Pressure Zone 1913 MOT (Motorized Adjustment): ○ Three pressure rollers, with the first one driven and made with SYNCHRO technology. ○ The other two rollers are tilted for better pressure on the edges. 5. Trimming Unit 1928 (2 x 0.45 kW, 12000 min⁻¹): ○ Pneumatically adjustable. ○ For precise trimming of edges up to 60 mm thick with HM saw blades. ○ Both units adjustable 0-10°. Two saw blades Ø110. 6. Multi-functional Milling Unit 1826 MOT4 (2 x 0.65 kW, 12000 min⁻¹): ○ Motorized adjustment. ○ Designed for profiling edges from 15° to 90° or straight. ○ Uses diamond tools made with AIR STREAM technology. ○ Tool radius R=2 mm. 7. Corner Rounding Unit 1833 MOT4 (2 x 0.65 kW, 12000 min⁻¹): ○ Motorized adjustment. ○ For corner rounding on the fly, with HM tools up to max. R=3 mm. ○ Ability to duplicate radius milling on the edge. ○ Uses diamond tools. Hodpswn Nuasfx Aaqow ○ Tool radius R=2 mm. ○ Workpiece thickness 10-60 mm. 8. Scraping Unit 1929 MOT4 (Profile Scraper): ○ Motorized adjustable. ○ For scraping PVC and ABS. ○ Max radius up to R=3 mm. ○ Equipped with two replaceable knives, blow nozzles, and dust extraction. 9. Polishing Unit 1964 (2 x 0.12 kW, 1400 min⁻¹): ○ Consists of two cleaning units with rotating felt discs. ○ Both units adjustable 0-5° for improved cleaning effect. 10. Netsystem 1856: ○ A set of 4 spraying nozzles (two at the front, two at the rear of the machine). ○ Liquid with anti-adhesive and cleaning properties. ○ Ensures an invisible joint and a pleasant finish.

Condition: used, Year of construction: 2004, Used machine Year of manufacture: 2004 Hodpfsvymdqox Aaqsw Equipment and technical data: Edge feed for rolls and strips Joining milling unit with 2 milling heads Adhesive application system cartridge 3-roll printing unit Cross-cut saw unit Radius milling unit Radius scraper unit Corner copying unit Surface scraper Buffing unit Workpiece thickness min./max.: 6/50 mm Edging thickness: 0.4-15 mm Edging height max.: 55 mm Edging length strip min.: 350 mm Edging projection per side max.: 3 mm Workpiece width min.: 60 mm Workpiece length min.: 180 mm Feed speed: 12.5 m/min. Machine dimensions L x W x H 6480 x 1250 x 1690 mm Availability: short term Storage location: Flörsheim

Condition: used, Year of construction: 2004, Cutting length 4300 mm, cutting height 2200 mm, motor 4.0 kW, cutting depth 60 mm, saw blade diameter 250 mm. Location: Nattheim. Hsdpjxr A Nvsfx Aaqow

Condition: used, Year of construction: 2001, Used machine Year of manufacture: 2001 Equipment and technical data: Machine is completely workshop overhauled! Automatic horizontal and vertical positioning for absolute and incremental dimensions Digital readout for horizontal cuts PLC control with a 2-line display and plain-text error diagnosis for operation mode and fault diagnosis Infinitely variable feed speed up to 24 m/min Automatic workpiece end detection Calculator function integrated in the control panel (calculation of workpiece dimensions) Cutting length: 4300 mm Cutting height: 2200 mm Max. trimming height: 2100 mm Max. scoring height, vertical: 2100 mm Max. cutting depth: 80 mm Motor: 5.5 kW Saw blade speed: 4,500 rpm Saw blade diameter: 300 mm Air requirement: 1,200 m³/h Air velocity: 20 m/s Static negative pressure: 1,200 Pa Extraction connection: 2 x 120 mm Dimensions (L x W x H): 5,620 (plus extraction nozzle) x 1,480 x 2,948 mm Room height: 2,990 mm Compressed air connection: 6 bar Air consumption: 50 NL/min Electrical connection load: 5.7 kW With Supercut pre-scoring unit With pneumatically swiveling saw unit With longitudinal stop for lower workpiece support With short folding rail, complete Hodpfx Asw Nac Ajaqjw Availability: by arrangement Location: Flörsheim

Condition: good (used), Year of construction: 2013, Cartridge system (for rolls and strip material) Reinforced cutting cylinder Cutting unit Hedpfjxqy Eljx Aaqow Multi-function milling station (chamfer-flush-radius) Pull scraper Edge thickness 0.3–3 mm External dimensions L x W x H approx. 3060 x 1040 + magazine plate overhang) x 1350 mm All information without guarantee; data obtained from a brochure.

Condition: used, Holz Her Auriga 1308 FÜ + PU Compact design - Edge thickness 0.4 - 8 mm PLC screen control Edge-Control PPC 221 color display Pre-milling unit for edge preparation before the gluing section Fully automatic edge magazine for both coil and strip material Gluing unit GLU JET cartridge + PU bonding - multi-system Adhesive application via nozzle technology Workpiece height 6-65 mm Hjdpjxrr Uzjfx Aaqew Automatic glue height adjustment Pressure unit 1912-3 pneumatic End trimming unit 1918 pneumatic for coil and strip material up to 8 mm edge thickness With pneumatic adjustment from 0-10° mitre for trimming saws Milling unit for flush trimming 8 mm, corner rounding, bevel trimming at 15° via control panel Profile trimming unit 1832 pneumatic, rounds corners up to 3 mm edge thickness in throughfeed Scraper unit for bevels and radii Flat scraper unit – finish Spraying device – PU Complete set of DIA tools included Machine is WORKSHOP-REFURBISHED in TOP CONDITION Available from stock in Lieboch

Condition: used, Year of construction: 2006, total length: 9,000 mm, total height: 2,400 mm, total width: 2,400 mm, Weight: 4.000 kg Price: On request Sawing width 85mm Sawing width 4250mm Sawing length 5250mm - Main motor power [kW]: 11.0 - Control: CUTCONTROL - Software: OPTIPRO - Max. saw blade diameter [mm]: 350 - Max. cutting length [mm]: 5250 - Max. cutting width [mm]: 4250 - Max. cutting height [mm]: 85 - Options: Optimalisatieprogramma, Voorritser - Year: 2006 - Documentation available: No - CE marking present: Yes - Serial number: 451 - Transport dimensions: 9000mm x 2400mm x 2400mm (l x w x h) Hodpfx Aaswk Efajqow - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 6 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 1994, Edge thickness 0.3 - 20 mm, edgeband height: max. 66 mm, edgeband length: min. 200 mm, workpiece width min. 60 mm, workpiece length min. 140 mm, workpiece thickness: min. 6 mm, max. 60 mm, feed speed 8 or 16 m/min - Edgebanding with Ultra - Granupress - End trimming with 2 saws, 0 - 15° tiltable - Milling, radius / flush - Corner copying - Scraper - Pneumatic buffing Location: Nattheim Hsdpovvkdtjfx Aaqsw

Condition: used, Year of construction: 2005, Used machine Year of manufacture: 2005 Equipment and technical data: Travel paths: - X-axis: 2,685 mm - Y-axis: 1,095 mm - Z-axis: 140 mm Milling unit: - 6 kW, water-cooled - Tool holder: HSK 63 F - Speed: 1,000 - 18,000 rpm Tool changer: 6-position, side-mounted Hjdpfswka H Ejx Aaqjw Drilling head: - 9 vertical drilling spindles, 32 mm pitch - Horizontal spindle: 1+1 - Vertical spindle: 1+1 Grooving saw in X direction Control: Twin CAM 32 Vacuum pump: 100 m³/h Includes vacuum suction cups Dimensions: 5,200 x 2,843 x 1,855 mm Weight: approx. 3,500 kg Availability: by arrangement Storage location: Röllbach

Condition: good (used), Year of construction: 1999, Cutting area approx. 4300 x 2100 mm manual feed automatic retractable grid Cutting depth 40 mm Motor 3 kW Hodjxp Uyuspfx Aaqew Saw blade diameter 220 mm TRK extraction Further technical data on request All information provided without guarantee

Condition: used, Year of construction: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4-30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6-45/60 mm (depending on equipment) Edge types: Rolls and strips Feed speeds: Continuous feed from 12-30 m/min (depending on equipment) With adjustable infeed level in the magazine area (max. adjustment range 30 mm) With height-adjustable magazine plate for changing the lower edge overhang With large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm With transport chain including automatic central lubrication With motor-driven, position-controlled bridge height adjustment With pneumatic locking roller for the shortest workpiece sequence With extendable workpiece support (extension width 1600 mm) With space-saving, pneumatically controlled sliding hoods over the entire machine (Deviations for individual units are possible) with motorized infeed guide with injection oiler for lubricating all joints and bolts (including operating hours counter) with central connection for extraction (2x Ø 200 mm) with integrated chip collection box at the end of the machine (when radius scraper unit is installed) PPC 231 control system - Power PC for efficient setup and changeover - 15" SVGA screen with touchscreen - 128 MB CF memory card - USB connector on board - Ethernet network connection - Keyboard connector on board - Windows-like user interface - all information in plain text and/or graphics - Rotatable and pivoting control panel at eye level - Dust-proof membrane keyboard with softkeys (pushbuttons) - LED display for unit preselection - Program list with program names and numbers - Extensive program memory - Individual selection of the units with the functions as basic setting options for setpoints, route points and tool corrections as well as the fixed route points - Centralized and clear setup processes for units and their axis settings via fine adjustment (depending on the equipment) - Interval display for the shortest workpiece distance - Integrated path control - Path points are controlled generally or program-specifically - Clear and complete recording of all operating data - Service messages in plain text - Diagnostic system - including integrated synchronous bus system for high precision in unit control - Individual administration for up to ten users, including password protection - Online maintenance (optional), data exchange with HOLZ-HER Service - Barcode interface (optional) BASIC MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the basic machine Spraying device 1856 for the inlet and outlet area For the inlet area: Electronically controlled release agent sprayer with Riepe-LPZ/II release agent For the outlet area: Electronically controlled cleaning agent sprayer with Riepe-LP163/93 cleaning agent (only in conjunction with pre-milling unit 1961 and surface scraper 1964) Joint milling unit Joint milling station 1803 (2x 2.6 kW, 200 Hz, 12000 min-1) With two plunge-controlled milling units 1 unit in up-cutting direction 1 unit in down-cutting direction Plunge path 5 mm With static frequency converter 200 Hz Without milling tool With ProLock screw-in clamp for fast tool changes Tool for 1803 (workpiece height up to 60 mm) Diamond milling cutter PRO UT 2 pieces (front and rear) including protective covers Ø 100-63 - Ø 30 mm, Z = 3 + 3 + 3, 1x left-hand rotation, 1x right-hand rotation Noise-reduced milling cutter with integrated chip guide DFC technology (Leitz syst Hsdpevvkfdsfx Aaqjw

Condition: used, Year of construction: 2004, Used machine Year of manufacture: 2004 Condition: Functionally tested Equipment and technical data: Travel distances: - X-axis: 2,685 mm - Y-axis: 1,095 mm - Z-axis: 140 mm Milling aggregate: - 6 kW, water-cooled - Tool holder HSK 63 F - Speed 1,000 - 18,000 rpm - Tool changer: 6-position, lateral Drilling head: - 9 vertical drilling spindles at 32 mm pitch - Horizontal drilling spindle: 1+1 - Vertical drilling spindle: 1+1 Grooving saw: in X direction Control: Twin CAM 32 Vacuum pump: 100 m³/h Including vacuum suction cups Hjdpfx Asxpla Soaqew Dimensions: 5200 x 2843 x 1855 mm Weight: approx. 3,500 kg Availability: as agreed Storage location: Lower Saxony

Condition: used, Year of construction: 2007, HOLZ-HER – 6310 CUT 110 580 Computer-controlled Panel Saw Watch the video of the machine: Year of manufacture: 2007 Machine number: 136 The machine has been overhauled in all essential mechanical components. New PC, new label printer, etc. in 2023 Technical Specifications and Description: Base machine: Pressure beam saw Version: Fence on the right Saw cycle: away from the fence Cutting length: 5,850 mm Cutting width: 5,850 mm Saw Blades: Main saw blade Ø 400 x 4.4 x 30 mm, Z72, FZ/TZ (not included!) Tungsten carbide pre-scoring blade Ø 180 x 4.4/5.4 x 30 mm, conical (not included!) Cutting Height Cutting height: 110 mm Saw blade projection: 120 mm Pressure beam: pneumatic, pressure adjustable Extraction: Central moving dust channel on the unit Extraction port base machine: 1x Ø 160 mm, positioned on the right side Dust channel in pressure beam: 2x Ø 120 mm – 1x top left, 1x top right with cutting length 5,850 mm: 3x Ø 120 mm – 1x top left, 1x top center, 1x top right Extraction air velocity: 30 m/s Air volume: 4,000 m³/h at 30 m/s Compressed Air Air consumption approx. 32 l/min at 6 bar per cutting cycle Switchable collet chuck pressure Switchable from the control panel For sensitive panel materials Automatic cutting length limitation The saw unit detects the workpiece end using a non-contact sensor and optimizes the cutting cycle Offcut device For cutting without leftover piece Clamps retract into recessed pressure beam Width Stop Precision-guided, freely programmable width stop with clamps Rack-and-pinion drive for precise positioning With surface-hardened linear guides Return speed of panel pusher: 80 m/min Forward speed of panel pusher: 80 m/min (EU – max. permissible forward speed 25 m/min) Max. opening for clamps: 120 mm for longitudinal and cross cuts Clamps, floating design Compensate for internal stress in panel packs upwards – 6 pcs for 3,250 mm cutting length – 7 pcs for 4,250 mm cutting length – 8 pcs for 5,850 mm cutting length Control CUTCONTROL 2 with 15" TFT display Operating system Windows 2000 RJ45 network connection 10/100 Base-T Fast Ethernet Intel Celeron processor Midi tower US keyboard Optical mouse CD ROM drive Control panel located on fence side Clearly arranged graphic-based operator interface for easy handling and order/material management on Windows basis Realtime display Large, clearly structured buttons All functions accessible from one level No limits in input fields and unlimited job inputs possible Hsdpfx Aasw I Uxpeqew Control Functions Direct Cut: Cutting by direct entry of cutting dimensions. Processing of absolute, serial, or format cuts, with integrated grooving, notching, or positioning cuts. Unlimited jobs programmable. Job prioritization (prioritization possible at any time). Order programming parallel to cutting. NC Cut: Processing of optimized jobs. Graphical machine overview with machine process flow function ...