Holzher 1205 for sale

Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
4

edge trimmer HOLZHER UF 362

Sankt Peter im Sulmtal, AustriaAustria dealership location
476 km
used
edge trimmer for overlapping edges motor approx. 3,0 kW tool speed 7000 RPM. 2 pcs suction hoods Ø 80 mm Bldocjsiu machine weight approx. 340 kg machine dimensions (L x W x H) = 1000 x 1250 x 1400 mm incl. tools Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the ... more
9
-Melting glue information about the cartridge system -Roller separation meter -Sawing cap -Radius-/Alliance bundle tanning unit -Radius draw blade -Surface drawing blade -Workpiece thickness 6-45 mm -Workpiece width at least 60 mm -Workpiece length min. 180 mm Nhicwamg -Edge thickness max. 3 mm -CE compliant more
10
Engine power 3.0 KW Saeblade 250 mm Bl397f7k Cut depth 55 mm Cutting amount to 5100 Cut height: 2060 To the rough cut Location: From warehouse 54634 Bitburg -immediately available- more
3
- Baujahr 1997 - Serie Nr. 098-1997 Technische Daten: - max. Schnitthöhe senkrecht: 2200 mm - max. Schnitthöhe waagerecht: 2100 mm - max. Schnittlänge: 5300 mm - max. Schnitttiefe: 80 mm - Durchmesser Sägeblatt: 300 mm - Motorleistung: 5,7 kW (7,5 PS) - Spannung: 400 V/3 Ph - Drehzahl: 5000 U/min - Durchmesser Absaugstützen: 2 x 100 mm - Vorritzaggregat Mv0y9hzy - inklusive Digitale Anzeige für Horizontalschnitte - inklusive Digitale Anzeige für Vertikalschnitte - inklusive automatisch auswei... more
7

Machines Kantenanleimmaschine HOLZHER 1401

St. Peter in der Au, AustriaAustria dealership location
7043 km
ready for operation (used)
600 €
Offernot incl. VAT
Another 10 days
Edge anteasco HOLZHER 1401 Cartridge system, bond binding mills D8f337h more
6
Panel saw Holz-her, HolzHer type 1265 Fabr. No. 7106 / 0-004-year of production 2000 Cutting area 5300 x 2100 mm Saw blade diameter 220 mm Ngs7z Blade speed approx. 4750 RPM. Motor power up to 3 kW Power supply 400 Volt, 50 Hz -Yoke swivel for longitudinal and cross sections -Suction tube of the blade -Fold-out stop Dimensions L x W x H 6200 x 1100 x 2850 mm Weight approx. 1200 kg very good condition more
7

Edgebanding HolzHer Sprint 1312

Hooglede-Gits, BelgiumBelgium
6154 km
2008
excellent (used)
Machine will be available by the end of September 2019 and is ready for use. With pull-out workpiece support at the front. Swivelling control panel at eye level with colour screen and membrane keypad with program control. Be0lutcnz2 Motorised walk-in ruler. Diamond pre-cutters. Edge magazine for rolls and edge magazine for strips. Pattern application system 1905. Manual pressure zone with 1 motorized pressure roller and 2 conical pressure rollers. Double saws straight and diagona... more
7
unipo 2TT1205CDN00 monitor unit TFT 12.1 "consisting of 7FPT1462X503 12" UFP display unit + 7BXG0950GH01 UFP control unit, serial number according to the photo, used, normal wear, 100% functional, included with com. photos Bckgnl0aom more
9
Compact Point to Point CNC, Router, drilling vertical and horizontal, grooving saw, 4 position tool changer, safety mats, and easy software. Still under power. X=2685 Y=1095mm Z=140mm Vertikale Bohrmaschine = 10 Stk Nmw3n Horizontale = 4st Flat table with vacuum cups. more
6

edge banding machine HOLZHER 1487 V

Rietberg, GermanyGermany dealership location
6460 km
2002
ready for operation (used)
machine edge banding machine manufacturer Holzher type 1487 V part Id-no. 2179277 year of construction 2002 ... more


holzher 1205
daily

New machines via email!

Stay updated!
1

Machines Kantenanleimmaschine HOLZHER 1408, Bj: 1988

St. Peter in der Au, AustriaAustria dealership location
7043 km
ready for operation (used)
1.200 €
Offernot incl. VAT
Another 10 days
Edge anteasco HOLZHER 1408, BJ: 1988 Bond/cap/milling, up to 25 mm, cartridge system Jvbfrq more
3

Panelsaw, Wallsaw Holzher 1212

Löhne, GermanyGermany
6462 km
ready for operation (used)
Panel saw , Wall Saw Brand: Holzher Type: 1212 Cutting length 5300mm Bez3je9qsk Cutting heigth 2200mm automatic feed more
7
HOLZHER plaqueuse de chants d’occasion – type EXPRESS 1437 – hauteur utile 50 mm – épaisseur de chants 0.3 mini – 13 mm maxi – système d’encollage à cartouche – agrégats de coupe en bout orientable – 2 groupe d’affleurage dessus/dessous droit et chanfrein/rayon – groupe de polissage feutre dessus/dessous – puissance globale 7 kW – vitesse d’avance 13m/minHOLZHER used edge banding machine - type EXPRESS 1437 - useful height 50 mm - edge thickness 0.3 min - max 13 mm - cartridge sizing system - sw... more
3
6DS1205-8AA of Siemens Teleperm, used, 100% functional Bcj2nm7mfp more
0
Lagerort: Lieferant Bbsgi7ku more
11

Edge banding machine Holzher 1314

Egenhofen / Herrnzell, GermanyGermany
6808 km
2007
good (used)
Edge anteasco machine Holzher Type: 1304 Machine Edge thickness max. 3mm Workpiece strength: 8 to 42mm Feed: 9m/min Bwtxj8iy Aggregates -Joining aggregate -Leimancation cartridge system -Cap knife -Cap aggregate -Milling station -RadiusDraw blade -Surface drawing blade Machine length: About 3000mm Built: 2007 Location: Warehouse/82281 Egenhofen-Herrnzell more
9

Machines Kantenanleimmaschine HOLZHER 1421, Bj: 1991

St. Peter in der Au, AustriaAustria dealership location
7043 km
ready for operation (used)
1.300 €
Offernot incl. VAT
Another 10 days
Edge anteasco HOLZHER 1421, BJ: 1991 Bond/milling up to 25 mm, drivable Ebfivfr more
6

edge banding machine HOLZHER 1487 TRIATHLON

Rietberg, GermanyGermany dealership location
6460 km
2005
ready for operation (used)
machine edge banding machine manufacturer Holzher type 1487 TRIATHLON part Id-no. 2246491 year of construction 2005 ... more
5
HOLZHER centre d’usinage d’occasion – type 7113 - capacité défonçage 2550 x 1250 mm - capacité de perçage 2610 x 874mm - tète de défonçage 5.6 kW - mandrin HSKF 63 - perçage 9 verticaux+ 2 horizontaux - lame de rainurage 0/90° - changeur d'outils 6 positions embarqué sur poutre arrière - Ø maxi de l'outil 150mm, masse maxi 5kg - 12 ventouses - pompe à vide 100m3/h 2.35kw - poste de travail TwinCam 32 en version Pc - plan de travail 2640x1160mmHOLZHER CNC machining center - type 7113 - cutting ... more
3
6DS1205-8AA of Siemens Teleperm, used, 100% functional Bcj2nworzq more
6
Vehicle data - brand: Jungheinrich - type: DFG 550 s GE 120-555 DZ - drive type: diesel - carrying capacity: 5000 kg - load Centre of gravity: 600 - lifting height: 5550 mm - range: 0 mm - built: 2012 - operating hours: 3023 - internal No.: G01904 _ _____ Kganlih7 Mast data - mast type: triplex - lifting height: 5550 mm - height: 2640 mm - free lift: 1790 mm - carriage: 0 mm - forks: 1200 x 0 x 0 mm _ Dimensions - length: 3150 mm - width: 1450 mm - height: 2640 mm - ... more
3

Machines Kantenanleimmaschine HOLZHER 1410, Bj: 1980

St. Peter in der Au, AustriaAustria dealership location
7043 km
ready for operation (used)
900 €
Offernot incl. VAT
Another 10 days
Edge anteasco HOLZHER 1410, BJ: 1980 Bond/Cappen/Milling Couud2b3 more
0

Eckenkopiergerät Holzher 1980

More Holzher 1980
Nattheim, GermanyGermany dealership location
6725 km
1980
used
max. Anleimerstärke : 8 mm max. Werkstückdicke : 60 mm min. Werkstückbreite : 90 mm Aggregatenanzeige : Skala Bedienung : über Fußpedal Fahreinrichtung : Ja Ausziehbare Rollenauflage : Ja Schutzhaube : Ja Arbeitshöhe bzw. Aufgabetischhöhe : 1000 mm MaschinenNummer : 172 / 9 - 07 Fpborh2l Gewicht ca. : 135 kg Abmessung : 700 x 600 x 1270 mm Absaugdurchmesser : 1 x 70 mm Lagerort: Bad Wimpfen more
6

panel saw HOLZHER 1220 AUTOMATIC

Rietberg, GermanyGermany dealership location
6460 km
1980
ready for operation (used)
machine panel saw manufacturer Holzher type 1220 AUTOMATIC part Id-no. 2248908 year of construction 1980 ... more
12
Machine with PLC – Control -Run-in lineal motor -Pressure bridge motor -Joining aggregate eque-counter run motor -Printing plant 1913 motor, 1st roll pneumatic and two repressure rolls -Kappsägeaggregate 1918 -Milling unit 1823 Alliance fellate -Milling unit 1824 motor multifunction milling unit -Draw blade aggregate 1836 motor -Eckround-trapping unit 1961 -Surface pulling blade 1964 -Schwabbel aggregate -Change milling engine for radius milling -Trench detergent spray device 1856 ... more
12
I sell the edge banding machine Holzher Sprint 1417 year 2000: Premilling Edge banding patron glue End cutting saws Strong flat milling Bez2w9hzmn Tilting radius milling Radius scrapers Corner rounding 1-motor Glue scrapers Polishing brushes New sharpened tools, new display, fully working. CE Mark. Good condition. With full documentation. more
6
Vehicle data - brand: Jungheinrich - type: EFG216GE-120-500ZT - drive type: electric - load capacity: 1600 kg - load Centre of gravity: 500 - lifting height: 5000 mm - range: 0 mm - built: 2012 - operating hours: 7100 - internal No.: E4871 _ _____ Mast data - mast type: standard - height: 5000 mm - height: 2990 mm - free lift: 0 mm - carriage: 0 mm - forks: 1200 x 100 x 40 mm _ Dimensions - length: 0 mm - width: 0 mm - height: 2990 mm - weight: 3500 kg _ Battery & char... more
4
Engine 1.6 Kw, 230 V, 50 Hz, 1380 U/min, Band length 1710 mm, 3 sawmills Beyiyzidjp more
0
max. Schnittbreite : 5300 mm max. Schnitthöhe : 2200 mm Sägeblattdurchmesser : 300 mm max. Bearbeitungsdicke : 80 mm I8jplius0 Sägeblattbohrung : 30 mm Auflage unten : Holz starr Materialauflage : Holzlattung ausweichend Kleinteilauflage : Ja Messsystem : Skala Schwenkung Sägekopf : manuell Sägevorschub : automatisch Befestigung : freistehend Absaugung : externe Absaugung Arretierung Sägebalken : manuell Gewicht ca. : 1800 kg Abmessung : 6300 x 2900 x 1500 mm Motorleistung : 5.5 kW La... more
6

edge banding machine HOLZHER 1310-1 SPRINT

Rietberg, GermanyGermany dealership location
6460 km
2006
ready for operation (used)
machine edge banding machine Nmeip manufacturer Holzher type 1310-1 SPRINT part Id-no. 2250917 year of construction 2006 ... more
10
Used edge gluing machine type Sprint 1315 Magazine Type 1903 Glue station cartridge type 1906 Digital adjustment Printing plant Type 1816 Pneumatic Caps Type 1822 Milling type 1942 M hand adjustment M339lv7p Pelvic rounds Type 1832 Pulling blade type 1929 Surface pulling type 1964 Net price from factory Delivery and commissioning possible, invoice after effort. more
5
Thickness of plywood-8 mm Bexvh0wnt8 Thickness of the roll in the roll-3 mm Feed-11 m/min Aggregate for rounding tips-1 engine Scrafting aggregate-profile scrape Aggregates that work pneumatically Machine length-4500 mm Year of manufacture: 1998 more
15

Single Sided Machine HOLZHER ACCORD 1468

Alzira (Valencia), SpainSpain
6435 km
2004
ready for operation (used)
Year of manufacture: 2004 Edge thickness: 0.4 - 30 mm Edge height: max. 66 mm Panel thickness: 6 - 60 mm Edge types: rolls and strips Caterpillar advance: 8/16 or 12/24 m / min (according to composition) Bevkiol83l Programmable logic system, inc. work data counter Large plates-rolls diam. 820 mm for rolls up to 800 mm more
0
max. Schnittbreite : 5300 mm max. Schnitthöhe : 2200 mm Sägeblattdurchmesser : 250 mm max. Bearbeitungsdicke : 60 mm Sägeblattbohrung : 30 mm Auflage unten : Rollen starr Materialauflage : Kunststofflattung ausweichend Bey08q9jgp Kleinteilauflage : Ja Messsystem : Skala Schwenkung Sägekopf : manuell Sägevorschub : manuell Befestigung : freistehend Absaugung : externe Absaugung Arretierung Sägebalken : manuell Gewicht ca. : 1200 kg Abmessung : 6085 x 1600 x 2845 mm Motorleistung : 3.0 k... more
6

edge banding machine HOLZHER ARCUS 1334-3

More Holzher Arcus 1334
Rietberg, GermanyGermany dealership location
6460 km
2010
ready for operation (used)
machine edge banding machine manufacturer Holzher type ARCUS 1334-3 part Id-no. 2252077 year of construction 2010 ... more
3
Feed 1117 3 roller 110 mm x 50 mm Bejc7qmllh 8 speeds 380 V With stand 1107 more
5
- working range approximately: X = 3450; Y = 1650; Z = 320. - 10 vertical drill spindles. - 4 horizontal drill spindles in the X direction. - 2 horizontal drill spindles in the Y direction. Icqbv32m - Saw aggregate for X and Y direction. - Milling motor 7.5 kW 2500-25000 rpm. - C axis rotate 360 ​​degrees - Warehouse for 6 tools, automatic change. - Vacuum pump for vacuuming the workpiece. - Laser for positioning of vacuum cups. - Safety mats for the machine more
1
Holzher edge banding device 1355, less good condition, thermostat or heating element defektPreisänderungen reserved, errors, printing, and typographical errors reserved Dv3nwa more
5
Automatic edge magazine for roll and stripes Glue station cartridge,. Caps saw unit, Multifunktionsfräsaggregat flush / RADIUS R = 2 mm, RADIUS scraper, Buffing wheels Nllm2 more
0

stehende Plattensäge HolzHer 1265 super cut

Nattheim, GermanyGermany dealership location
6725 km
1991
used
max. Schnittbreite : 5300 mm max. Schnitthöhe : 2200 mm Sägeblattdurchmesser : 300 mm max. Bearbeitungsdicke : 80 mm Sägeblattbohrung : 30 mm Auflage unten : Holz starr Materialauflage : Kunststofflattung ausweichend Kleinteilauflage : Ja Messsystem : Skala Gepg892i Schwenkung Sägekopf : manuell Sägevorschub : manuell Befestigung : freistehend Absaugung : externe Absaugung Arretierung Sägebalken : manuell Abmessung : 6300 x 2900 x 1500 mm Motorleistung : 5.5 kW Lagerort: Nattheim... more
6
machine feeder manufacturer Holzher Ttffgly type ET 117 part Id-no. 2252102 rollers 3 piece ... more
7
The machine had we until now in use and has been replaced by another, and is therefore for sale. Facilities: automatic reel magazine 1902 Bonding station with cartridge 1906 pneumatic pressure plant 1913 Kappagregat 1918 Milling unit 1942 M - flush and 2 mm radius Scraping unit 1929 Buffing unit 1944 Bd7yrxgwhk Workpiece thickness 8-45 mm Workpiece width of min. 60 mm Workpiece length of min 180 mm Roll edge thickness 0,3-3 mm Edge thickness single 0.3-30 mm User's manual more
4
Mounting plate, marking-out, sine plate, plate, measuring, welding table, welding table, ribbed dressing plate Width 810 mm Length 1205 mm Js79b3 Working height 820 mm -with supporting ribs Thickness 25 mm Weight 260 kg more
4
HolzHer Plate Saw Type 1215 Built in 1993 Workpiece length 4300 mm Base area 5555 x 1480 mm Cut-depth 80 mm Sawbold 300 mm Weight about 1000 kg Iiozgnpm more
7
Betwvwleti I sell the manual panel beam saw Holzher CUT 85 Industry 6210 Year 5/2009 Working field 4250x3850mm Cutting height 85mm Motors 11 + 2,2 kW Automatic detection of cutting length Device for veneer overhanging elements Postforming cut also with scoring Grooving device Elektronic adjustable scoring Label printing device with programme OPTI-CUT optimising software Barbaric 2 position loading and storing system LCV up to 200kg workpieces more
14
Machine already available from us and ready for use! 12″ color screen Swing-out front support rail on heavy swivel arms extendable up to 1.6M. Automatic lubrication for the conveyor chain Belt at the top and locking roller at the front Front and rear provided with spraying agents PVC chip tray at the top of machine Motor inletlineal 2 heavy diamond pre-cutters D100mm Pattern production system for both patterns and granules Motor pressure zone with 3 large rollers, 1 of which is motor... more
7
HolzHer Sprint 1310, new selling and service of our company went back now included in new verkuaf. Ju9ose Complete with scraper units more
3
Cutting length 4300 mm,. Cutting height 2095 mm Max loading hem height 2040 mm,. Jchdv8lam Cutting depth 50 mm. Motor 3 kW Saw blade diameter 220 mm,. unüberholt from site Seevetal, without transport and Assembly. Subject to prior sale more


holzher 1205
daily

New machines via email!

Stay updated!

to

to

Edit search
HOLZHER 1205
SELL IMMEDIATELY
with the world-wide market leader from 0,79 EUR per listing.
Find out more


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our app for used machines now!
Machineseeker app for iPhone and Android.