Edge banders Holz-her Sprint 1317 2007

Holz-her Sprint 1317

Condition: used, Holz Her Sprint 1317-1 FÜ + PU heavy-duty design – edge thickness 0.4 – 5 mm SPS screen control large LCD display pre-milling unit before gluing area fully automatic edge magazine for coil and strip material glue application station for cartridges + PU gluing Bwjdpfxoyfn Urs Afpoh maximum edge height 51 mm automatic glue height adjustment press unit 1913, motorized pneumatic trimming unit for coils and strips with pneumatic adjustment for miter saw angle from 0–10° multifunctional milling unit 1942 MOT 2 milling unit with motorized adjustment axes for various radii – chamfering – flush milling via SPS copy milling unit 1832 for corner copying up to R 3 mm + postforming up to R 6 mm scraping unit for chamfers and radii pneumatic infeed and outfeed finish – surface scraper regular maintenance by Holz Her machine is FACTORY SERVICED, in EXCELLENT CONDITION available from stock in Lieboch

Condition: used, Year of construction: 2017, Used machine Year of manufacture: 2017 Equipment and technical specifications: Factory-refurbished by Lange Maschinenbau Minimum workpiece width: approx. 75 mm Workpiece thickness: 8 - 50 mm Minimum workpiece length: approx. 120 mm / 180 mm for corner copying Bedpfsw Sbblox Afpewh Edge thickness: 0.4 - 2 mm Jointing unit shaving removal: 0 - 2.0 mm, infinitely adjustable Jointing unit with 2 counter-rotating, application-controlled jointing motors Diamond tooling height = 55 mm Direct glue application to the workpiece Glue pot with 1.5 kg capacity EVA/PUR glue pot with discharge function Pressure unit End trimming unit with high-frequency motor, 2 saw blades and high-precision linear guides Combined milling station for radius and bevel milling Corner copying unit Flush trimming unit Extraction pipe system with 90° bend and manual slide valve mounted on the machine Machine length: 3273 mm Dimensions: 320x110x200 Availability: short-term Location: Flörsheim

Condition: used, Edgebander Holzher Sprint 1317 Pre-milling units Glue application, glue cartridge Pneumatic pre-cut guillotine Pressure rollers Cut-off saws Bwsdpfxsx Tf D Us Afpoh Top and bottom milling units Corner rounding unit Profile scraper Flat scraper Polishing unit Max edge height mm: 50 Edge band thickness in roll: 3 mm Feed speed: 10 m/min The machine requires servicing as well as setting and adjustment. The machine can be switched on; all units activate, but the front saw does not respond to material and the corner rounding unit needs adjustment.

Condition: used, Year of construction: 2003, Used machine Year of manufacture: 2003 Features and technical data: - Control system with LCD display - Swiveling operator panel - Program memory - Manual pressure bridge adjustment - Feed via transport chain - Extendable workpiece support Jointing unit 1961: - 2 x 2.0 kW - Diamond jointing cutters for up-cut and down-cut operation Edge magazine 1903: - Support plate 820 mm, max. loading capacity 40 mm - Automatic feeding of coil and strip material Adhesive application system 1906: - Cartridge system with sensor-controlled nozzle - Automatic reloading - Use of PUR adhesives possible Pressure unit 1816: - With powered roller - Pneumatic control of the pressure unit End trimming unit 1918: - 2 x 0.22 kW - Swivels from 0 to 10°, pneumatically adjustable Milling unit 1942 MOT 2: - For flush, radius, and chamfer milling - Motorized adjustment - Air nozzle at milling unit Corner copying unit 1832: - Corner copying up to r = 3 mm, postforming up to r = 6 mm Bwedpfowka Nysx Afpsh Radius scraper unit 1929 MOT 2: - For plastic edging up to 3 mm - Chip collection box for radius scraper Surface scraper 1964: - Process-controlled surface scraper - Air nozzle at surface scraper Buffing unit 1940 Edge thickness, coil material: 3 mm Edge thickness, strip material: 5 mm Max. edge thickness, corner copying: 3 mm Workpiece thickness: 6-45 mm Workpiece thickness, corner copying: 45 mm Min. workpiece length: 180 mm Feed speed: 8 m/min Distance, workpiece support: 470 mm Support plate diameter for edge material: 800 mm End trimming blade for coil material up to: 3 mm Heating up time: 3.5 min Jointing cutter power: 2 x 2 kW End saw power: 2 x 0.22 kW Milling station power: 2 x 0.6 kW Corner copying power: 0.22 kW Extraction nozzle jointing unit: 120 mm Extraction nozzle milling unit: 70 mm Extraction nozzle scraper unit: 70 mm Dimensions: 5,350 x 1,669 x 1,940 mm Weight: 1,200 kg Location: Röllbach Availability: short notice

Condition: used, Year of construction: 1999, Holz-Her SPRINT 1411 edgebander Description Workpiece thickness min./max. 6/45mm Automatic edge feeder (coil up to 5mm) Workpiece min. 60mm Workpiece length min. 180mm Cartridge glue system (short heat up time 2-3 min.) End trimming unit Flush trimming unit Scraping unit (flat) Buffing (brushing) unit CE (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). Bwjdpfx Ajw Ebrxsfpjh (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen vorbehalten! Keine Garantie auf gedruckte Daten!. Verfügbarkeit vorbehaltlich Zwischenverkauf).

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Edge Control control system with 18.5" touchscreen color monitor 16:9 Swiveling operator panel, Program storage, Motorized pressure bar adjustment, Feed via transport chain, Feed speed: 8-18 m/min Extendable workpiece support, Infeed fence with motorized adjustment Jointing unit 1961, Diamond jointing cutter for climb and counter rotation, Automatic adjustment to workpiece height Edge feed 1903 Pre-trimming up to 3 x 45 mm (depending on material) Glue application system 1905 Multi-System Automatic glue height adjustment with sensor nozzle, Bwodpfx Asv Sv Enefpjh Pressure regulator for adjusting the cartridge contact pressure, Use of PUR adhesives possible, Pressure unit 1913 MOT, First roller driven End trimming unit 1918 with pneumatic adjustment End trim saw pneumatically swiveling, Multifunction unit 1824 MOT 4 with multifunction cutter radii 1,2,3 mm Corner copying unit 1832 Corner copying up to 3 mm edge thickness Radius scraper 1929 MOT 2 With motorized adjustment of horizontal tracing rollers With pneumatic adjustment (top and bottom separate) Chip collection box for radius scraper, Surfacing scraper 1964 For removing glue residue for a clean glue line With extraction hoods Spray unit 1856 for infeed and outfeed area Buffing unit 1940 For finishing and edge polishing ----- Technical Data ----- Edge thickness roll material: 3 mm, Edge thickness strip material: 8 mm, Max edge thickness for corner copying: 3 mm, Workpiece thickness: 45 mm, Workpiece thickness for corner copying: 45 mm, Min. workpiece length: 180 mm, Feed speed: 8-18 m/min, Distance workpiece support: 470 mm, Support table diameter for edge material: 800 mm, End cut knife for coiled material up to: 3 mm, Heating time: 3.5 min, Jointing unit power: 2 x 2 kW, End trim saw power: 2 x 0.22 kW, Milling station power: 2 x 0.35 kW, Corner copying power: 0.22 kW, Extraction port jointing unit: 120 mm, Extraction port milling unit: 70 mm, Extraction port scraper unit: 70 mm, Total length: 5,350 mm, Dimensions (LxWxH): 5,350 x 1,669 x 1,940 mm Picture of operating hours taken from a recording in 2022 Availability: short term Location: Röllbach

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, feed rate X-axis: 18 m/min, edge thickness (max.): 8 mm, product height (max.): 45 mm, product length (min.): 180 mm, TECHNICAL DETAILS Control: Edge Control with 18.5" touchscreen color screen (16:9) Control panel: Swiveling Program memory: Available Pressure bridge adjustment: Motorized Feed: Using a transport chain Feed speed: 8 - 18 m/min Workpiece support: Extendable Infeed ruler: Motorized adjustable Edge thickness of rolled goods: 3 mm Edge thickness of strip goods: 8 mm Maximum edge thickness for corner copying: 3 mm Workpiece thickness: 45 mm Workpiece thickness for corner copying: 45 mm Minimum workpiece length: 180 mm Distance between workpiece support: 470 mm Support plate Ø for edge material: 800 mm Milling and processing units Joining milling unit: 1961 Cutter type: Diamond jointing cutter in synchronous and counter-rotating motion Workpiece height adjustment: Automatic Edge feed & Glue application Edge feed: 1903 Pre-capping: Up to 3 x 45 mm (depending on material) Glue application system: 1905 Multi-System Glue height adjustment: Automatic with sensing nozzle Pressure regulator: For regulating the cartridge contact pressure PUR glue use: Possible Printing unit & cutting unit Printing unit: 1913 MOT Drive: 1st roller driven Cutting unit: 1918 with pneumatic adjustment Cutting saw: Pneumatically pivotable Milling and edge processing Multifunctional unit: 1824 MOT 4 Milling cutter: Multifunctional milling cutter radii 1,2,3 mm Corner copying unit: 1832 Corner copying function: Up to 3 mm edge thickness Radius scraper: 1929 MOT 2 Tactile roller adjustment: Motorized (horizontal) Pneumatic adjustment: Top and bottom separated Cleaning & polishing Chip collection box: For radius scraper Surface scraper: 1964 (for removing the adhesive residue for a clean adhesive joint) Extraction hoods: Available Spray device: 1856 for the inlet and outlet area Buffing unit: 1940 (for cleaning and polishing edges) Performance data & extraction Cutting knife for rolled goods up to: 3 mm Heating time: 3.5 min Power of jointing cutter: 2 x 2 kW Power of cross-cut saw: 2 x 0.22 kW Power of milling station: 2 x 0.35 kW Power of corner copying: 0.22 kW Extraction nozzle of jointing milling unit: 120 mm Extraction nozzle of milling unit: 70 mm Extraction nozzle of scraper unit: 70 mm MACHINE DETAILS Total length: 5,350 mm Dimensions (LxWxH): 5,350 x 1,669 x 1,940 mm EQUIPMENT - Swiveling control panel - Program memory - Motorized pressure bridge adjustment - Feed by means of transport chain - Extendable workpiece support - Motorized infeed ruler - Diamond jointing cutter in synchronous and counter-rotation - Automatic adjustment to workpiece height - Pre-cutting up to 3 x 45 mm (depending on material) - Glue application system with automatic glue height adjustment and sensing nozzle - Pressure regulator for cartridge contact pressure - PUR glue can be used - Printing unit with driven 1st roller - Cutting unit with pneumatic adjustment - Pneumatically swiveling cutting saw - Multifunctional unit for radii 1,2,3 mm Bwodsvzybljpfx Afpsh - Corner copying unit up to 3 mm edge thickness - Radius scraper with motorized sensing roller adjustment - Chip collection box for radius scraper - Surface scraper for clean adhesive joint - Extraction hoods - Spray device for inlet and outlet area - Buffing unit for cleaning and edge polishing

Condition: used, Year of construction: 2001, total length: 5,650 mm, total height: 1,750 mm, total width: 1,100 mm, Weight: 1.950 kg Price: On request - Year: 2001 - Documentation available: No - CE certificate present: No - Serial number: 468/0-103 - Transport dimensions: 5650mm x 1100mm x 1750mm (l x w x h) - Transport weight [kg]: 1950kg - Transport packages [pcs.]: 1 Bodpexlqpdjfx Afpjwh Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels