Used Edge Glue for sale (5,488)

Condition: good (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 020313L, pressure: 7 bar, Description: Solid steel construction for high machine stability. Workpiece feed via sliding transport chain with plastic plates. Upper pressure fitted with two rows of rubber-coated rollers. Manual adjustment of upper pressure with automatic positioning of the units according to the changed workpiece thickness. Mechanical digital display of panel thickness. PLC for on/off control of the motor and glue pot. Glue pot with standby function for temperature control. Start/stop function for all motors. End trimming unit for 3 mm edging rolls. Support tray for edging rolls with up to 800 mm diameter. Central dust extraction. Roller rail as workpiece support along the entire machine. Safety cover over all processing units. Control panel, including emergency stop and lockable main switch. Transformer for 24V auxiliary circuit. Jointing milling unit before the gluing section, for preparing the workpiece edge for adhesive application. With adjustable infeed fence. Maximum material removal 2 mm. 2 motors at 1.1 kW each, 12,000 rpm, max. material removal 2 mm, extraction port Ø 120 mm, incl. 2 WIDIA cutting tools. Gluing section for hot-melt adhesive with fast heating and adhesive application roller. System for temperature control and recycling of excess hot-melt adhesive. Power requirement 3.5 kW, capacity 1.5 kg, heating time approx. 15 min., depending on ambient temperature and adhesive. End trimming unit With 1 saw blade for trimming front and rear edge overhangs at a 90° angle, flush to the workpiece. Trimming for the front and rear overhangs can be controlled individually as needed. Motor: 0.35 kW. Saw blade speed: 12,000 rpm. Flush milling unit With 2 motors for milling a radius or chamfer on the top, bottom, and/or front edge. Vertical and horizontal motor adjustment on hardened steel guide rails and ball bearings. Three manually adjustable positions for different edge thicknesses. Motor not tiltable. Unit complete with WIDIA cutting tools 2/3 mm. 2 motors, 0.55 kW each, 12,000 rpm. Diamond cutting tools, 68mm Z6, R=2. Profile scraper knife Bedpfxexn Hzbe Aaqoww Flat scraper knife Buffing unit Technical data: Edging strip thickness (manual feed) max: 5x45 mm Pre-milled panel thickness: 10 - 40 mm Unmilled panel thickness: 10 - 60 mm Max. height melamine edging: 65 mm Max. height ABS edging: thickness 0.4-2 mm = 65 mm; thickness 2-3 mm = 40 mm Max. edge overhang top/bottom: 2 mm each Minimum workpiece width with roll material: 90 mm Minimum workpiece length with roll material: 160 mm Adhesive temperature: 190°-210° Feed speed: 8 m/min Inverter: 200 Hz Compressed air: 7 bar Extraction nozzle Ø: 2x 60 mm CE standard

Condition: ready for operation (used), Year of construction: 1986, Ott Höfer 2-Roller Glue Application Machine ZLA 1300 Working width: 1300 mm Max. workpiece thickness: 80 mm Roller diameter: 165 mm Both rollers are in good condition Feed speed: 18 m/min Drive power: 0.75 kW Working height: 800 mm Required space: 2000 x 750 x 1150 mm Weight: 500 kg Bjdpfoxqrdasx Aaqoww

Condition: new, functionality: fully functional, Year of construction: 2025, load capacity: 1,500 kg, lifting height: 115 mm, fuel type: electric, construction height: 1,160 mm, fork length: 1,150 mm, empty load weight: 123 kg, total length: 1,530 mm, drive type: Elektro, construction width: 540 mm, Low lift truck Load centre of gravity: 600 Fork width: 160 mm Fork thickness: 47 mm Gearbox: Electromechanical Condition: New device Technical condition: New Front tyres type: Polyurethane Rear tyres type: Polyurethane Battery voltage: 24V Battery Ah: 20Ah Battery manufacturer: Noblelift Battery type: Lithium-ion Bedpevw Eylofx Aaqsww Battery year of manufacture: 2025 Description: - Pin code access - Discharge indicator and operating hour counter, - Lithium battery - Spring-loaded side support rollers D80x30 - Tandem load rollers D80x70

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Max. edge thickness: 3mm (roll material) / 8mm (strip material) Roll-cutting unit Crosscut saw Flush-milling unit, combination milling cutter Dimensions: approx. 3300 x 1400 x 1300mm (LxWxH) Weight: approx. 550 kg Bwodpfx Aoxpu N Nsaqsw

Condition: used, 0 0,4 - 5,0 mm Workingpiece thickness from to 10 - 50 mm Total length 4000 mm Feed speed 11 m/min. Bimatic edge bander Type Prima 7.5 Two ----- Manufacturer's description: Technical data: Edge thickness: 0.4 - 5mm min. Panel width (without rounding unit): 80 mm min. Panel width (with rounding unit): 130 mm min. Panel length (without rounding unit): 100 mm min. Panel length (with rounding unit): 300 mm min. panel thickness: 10 mm max. panel thickness: 50 mm Feed speed: 11 m/min Suction nozzle: 3 x 150 mm Connection: 9 kW - 400 V / compressed air: 6 bar Aggregates: Jointing unit incl. AIGNER diamond jointing cutterheads, with DIA- interchangeable knife system Konstantin and controlled edge blow-out nozzle behind the 2nd jointing knife head. Joining cutterhead. Cross-cut saw unit with suction device incl. 2 pneumatically swivelling saw blades saw blades, adjustable and programmable from the control panel. MULTI radius trimming unit with 4 servomotors, adjustable and programmable from the control panel. programmable from the control panel. Including DIAMANT cutter with radius 1mm and radius 2mm. Rounding unit (copy trimming unit) with insert shelf function and pneumatic 2-position turret, adjustable and programmable from the control panel. The The complete unit can be pneumatically inserted and removed from the control panel. Including 1 quick-change motor with R=1mm and 1 quick-change motor with R=2mm MULTI radius scraper unit radius 1mm and radius 2mm with pneumatic 4-position turret. position turret. The unit can also be inserted and removed pneumatically Including suction device with chip collection box for scraper chips. Flat scraper unit with 4-fold usable scraper knives. The complete The complete unit can be inserted and removed pneumatically. Remaining glue is Bwedpfxowgwl De Aaqow are sucked off. Buffing unit with 2 diagonally arranged ORIGINAL Riepe cloth-sisal wheels for cleaning and buffing. lamellar wheels for cleaning and polishing General equipment: - 90° insertion aid - Telescopic extension with double support - Motorised adjustable infeed ruler (joint thickness adjustment) from the control panel adjustable and programmable - Motorised adjustable top pressure bar adjustable and programmable from the control panel programmable - Motorised adjustable pressure zone adjustable and programmable from the control panel programmable - 5 mm version: Quick-change motors with insert-flush milling cutter interchangeable with milling motors with radius milling cutter - High-gloss package: Roller scanning for radius milling unit, radius scraper unit and flat scraper unit scraper unit and flat scraper unit - Large viewing, noise and protection cabin for all units and for the glue pot - Interior lighting - Control panel with 15'' touchscreen and self-explanatory operator guidance - USB port for data backup and data transfer - Network connection for online support - Controlled pneumatic cylinder for workpiece distance control - Teflon-coated glue tray with quick-change system and energy-saving mode in standby mode in standby - Glue roller with screw conveyor for long and high workpieces (especially for PUR glue) - Additional quick-change glue tray - Pressure zone with 3 pressure rollers, whereby the 1st pressure roller is motorised is motorised - Heavy roller snipping shears for edges 54 x 3 mm - Original RIE...

Condition: used, Edge sanding machine Gartner FLK 4 - used - including mitre fence ----- Technical Data ----- Sanding belt width: 200 mm, sanding belt length: 2,350 mm, worktable dimensions: 870 x 400 mm, belt speeds: 4, extraction nozzle Ø: 80 mm, motor: 3 kW Bwodjxd U Uhepfx Aaqsw

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: C-261-04-2523, feed rate X-axis: 9,000 m/min, saw blade diameter: 100 mm, rotational speed (max.): 12,000 rpm, Submitting a bid obliges you to collect the item by the deadline of 14.10.2025! TECHNICAL DETAILS Edge Processing Edge type: Straight edges Edge material: Cut-to-size strips, lip cuts, coil material Feed speed: 9 m/min Edge material thickness: 0.4–3.0 mm Lip thickness: 0.4–3.0 mm Edge material height: 55 mm Coil diameter: 800 mm Rotation speed: 12,000 rpm Max. tool dimensions: 100 × 62 × 30 mm Extraction port Ø: 120 mm Workpiece Data Workpiece thickness: 8–50 mm Positioning accuracy: 0.1 mm Edge Banding Edge type: Straight edges Edge material: Coil material Max. tape cut: 3 × 30 mm or 0.8 × 45 mm Operating pressure: 6 bar Edge Glue Applicator Rotation speed: up to 1,800 rpm End Trimming Unit Motor speed: 12,000 rpm Saw blade diameter: 100 mm Cutting width: 2.6 mm Bore diameter: 32 mm Workpiece thickness: 45 mm Max. edge material height: 3 mm Edge material angle: 0–15° Edge material cross-section: 135 mm² Flush Trim Unit Bwedpfx Aajxhgk Ajqow Rotation speed: 12,000 rpm Max. workpiece thickness: 8–50 mm Max. edge thickness: 3 mm Straight tools: 2 × WPL milling cutter Ø 50 × 12 × 16 mm, z = 4 Combination tools r = 3 mm: 2 × Trimmer Ø 56 × 50 × 12 × 16 mm, z = 4 MACHINE DETAILS Electrical Data Voltage: 400 V Frequency: 50 Hz Fuse protection: 16 A Control voltage: 24 V

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 + in stips / lippings (max mm 1) Panels thickness (min/max) mm 8 / 45 (60) Working width (min/max) mm 236 (266) / 3300 Numerical Control / Software ICOS Open (Windows base) Adjustable feeding speed (m/min ) 10 - 50 (Master & Slave) Safety and sound-proof enclosures/cabins SIZING PART (for each side): Anti-chipping Milling Unit 75.186 (1 x Kw 4,4) Hogging Units (2 x Kw 6,6) Max 35 m/min Milling unit (Joint Trimmer) 75.186 (1 x Kw 4,4) EDGE-BANDING PART (for each side): Glueing Unit (P.U.R. Glue + Quick Melt system) VTG 3-24 + 283.203 Pressure zone + Edge coils supporting unit (No. 24 reels) Snipping (end-cutting) unit 08.42 / 30 / B (2 x Kw 0,66) 30 m/min (0°-25°) Rough/Fine Trimming unit 08.055 (2 x Kw 1) 0°-30° (30 m/min) Multi Function Unit (Profile contour Trimming unit) MFA 08.342 (2 x Kw 0,66) SERVO - 20m/min OPTIONAL: KFA 30 Bsdpfsxggzlex Aaqsww Profile Scraping unit 08.519 Glue scraping unit 08.521 Buffing unit 08.604 (Kw 0,25 x 4) No. 2 Grooving units 08.190 (1 x Left-hand + 1 x Right-hand) (Kw 4,5 x 2) swivelling 90°/180°/270°

Condition: new, functionality: fully functional, Year of construction: 2024, load capacity: 1,500 kg, lifting height: 115 mm, fuel type: electric, construction height: 1,160 mm, fork length: 1,150 mm, empty load weight: 123 kg, total length: 1,530 mm, drive type: Elektro, construction width: 540 mm, Low lift truck Load center of gravity: 600 Fork width: 160 mm Fork thickness: 47 mm Gearbox: Electromechanical Condition: New device Technical condition: New Front tires type: Polyurethane Rear tires type: Polyurethane Battery Volt: 24V Bwjdpfx Aasucg Troqjw Battery Ah: 20Ah Battery manufacturer: Noblelift Battery type: Lithium-ion Battery year of manufacture: 2024 Description: - Pin code access - Discharge indicator and operating hours counter, - Lithium battery - Sprung side support rollers D80x30 - Tandem load rollers D80x70

Condition: new, Year of construction: 2024, functionality: fully functional, feed rate X-axis: 9 m/min, workpiece height (max.): 50 mm, edge thickness (max.): 5 mm, warranty duration: 12 months, HOLZ-HER Edgebander ARTEA 1020 Stock machine – Subject to prior sale Year of manufacture: 2024 - Base machine 1020 - Edge Control BC15 with Vi.Se. (Visual Setting) Bwodpfx Aoxpgv Usaqow - LED machine lighting - Jointing milling unit - GluJet for PUR / EVA including adhesive reservoir - Milling - Profile scraper - Surface scraper - Buffing unit

Condition: used, Year of construction: 1995, Pizzi glue application machine, used, EXW Bwedpfow Az Twsx Aaqow

Condition: ready for operation (used), Year of construction: 1990, A linear wet glue/cold glue labeling machine Langguth for cylindrical containers is available. Gluing height: 210mm, labeling capacity: approx. 7000/h, labeling method: wet glue/cold glue, container diameter: 73mm/83mm/99mm, machine dimensions X/Y/Z: approx. 3000mm/1300mm/1800mm, weight: approx. 350kg. An on-site inspection is possible. Bwsdpsxnz Uiofx Aaqow

Condition: used, Oscillation ja_yes ja / nein 0 ja_yes ja/nein 0 ja_yes ja/nein tiltable up to ja_yes Motor output 2,2 kW Table dimensions 1000 x 350 mm sanding width 200 mm Weight 300 kg Langzauner LZK 3/2, BB 200 Edge Sander ----- Technical manufacturer's specifications: Table width: 345 mm Table length: 1000 mm Bwsdpfx Aaswzmuwjqew Maximum sanding belt width: 200 mm Sanding belt length: 2600 mm Main motor: 3 kW Circular sanding support: Yes Oscillation: Yes Height adjustment: Manual table Swivel sanding belt: Yes Space required length: 1800 mm Space required width: 900 mm ----- Price of the above-mentioned machine upon request! (Technical specifications according to the manufacturer - no guarantee!) All prices quoted are net, plus statutory VAT. No original images available yet; image from a brochure for the same model

Condition: excellent (used), Double-side Sizing-Milling & Edge Banding - First (1st) machine in a line Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Panels thickness (min/max) mm 8 / 45 (60) Working width (min/max) mm 250 / 1300 Numerical Control / Software ICOS Open (Windows base) Adjustable feeding speed (m/min ) 10 - 50 (Master & Slave) Safety and sound-proof enclosures/cabins Bwedpfexggthox Aaqew SIZING PART (for each side): Hogging Units (2 x Kw 6,6) Max 35 m/min Milling unit (joint Trimmer) 75.186 (1 x Kw 4,4) EDGE-BANDING PART (for each side): Glueing Unit (PUR. Glue + Quick Melt system + EVA Glue) VTG 3-24 + 283.201 + 283.19 + 283.203 Pressure zone Edge coils supporting unit (No. 24 reels) Rough/Fine Trimming unit 08.055 (2 x Kw 1) 0°-30° (30 m/min) Rough/Fine Trimming unit 08.055 (2 x Kw 1) 0°-30° (30 m/min) Profile Scraping unit 08.515 Glue scraping unit 08.521 Buffing unit 08.617-2 (2 x Kw 0,18) No. 3 Grooving units 08.190 (2 x Left-hand + 1 x Right-hand) (Kw 4,5 x 3) swivelling 90°/180°/270°

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, machine/vehicle number: AH00004861, temperature: 15 °C, operating pressure: 6 bar, NEW OPTIONAL SEMI-INDUSTRIAL EDGEBANDER SEMI-INDUSTRIAL WITH SIMPLIFIED CONTROL PANEL Make: SCM Model: K360 T-ER1 Year: 2023-2024 CE AH00004861 MACHINING CAPACITIES : - Panel height: 8 - 50 mm Thickness: 10 to 45 mm with use of rounding tool - Length of panel to be clad: 210 to 2500 mm - Minimum panel width: 90 to 1100 mm - Roll edge thickness: 0.4 to 3 mm without rounding max 3 mm with rounding - Strip edge thickness: max 6 mm without rounding max 3 mm with rounding - Edge width: panel thickness +2mm on each side - Drive (feed speed): 11 m/min - Workpiece spacing: 600 mm - Part protrusion from transfer chain (panel protrusion): 30 mm MACHINE COMPOSITION : - Reel table - Predisposition to receive an air-cushion table - Work table with front extension - Drive belt: chain - Non-stick spray unit - Edge straighteners (2 routers) rpm Diamond tools - Gluing unit with interchangeable tray Pneumatic pre-cutter Marouflage (pressing) with 3 rollers (1 motorized) - Chop-saw butt-cutting unit - Nesting copying top/bottom trimming unit - Rounding unit - Radius scrapers - Straight scrapers Bwodpottakhefx Aaqew - Edge finishing spray device (Nebulization) - Textile polishing brush station - General power supply: 400v. Three-phase+N+T 50Hz Options installed on the machine : - 10.09.98 European safety standards (CE standards) - 63.05.29 Provision for an eventual air cushion plane at machine inlet - 62.15.02 "Nesting" copier kit - 62.12.03 "AAR" anti-stick group - 62.12.61 Nebulization device for edge finishing - 62.14.55 Diamond tools H=64 on grinding group - n.2 cuts - 62.15.06 "SGP-E" glue pot - Instead of the standard glue pot - 62.15.04 "RC-N" glue scraper group - 62.12.12 "SP-V" brush group Machine available : in stock

Condition: used, Technical details: plate thickness: 10 mm Bwodpfxju Ngfqe Aaqsw material thickness: 4,5 - 10 mm capacity in W: 2000 Watt voltage: 220 mit 4 Meter-Kabel V machine weight approx.: 18 kg dimensions of machine: L: 550 x B: 120 x H: 260 mm WELDING EDGE SHAPER - GRINDING MACHINE or PLATE SHAPER Hand tool Application: cutting and notching of plate-shaped workpieces Material thickness depends on material (max. 10mm) Tool = lower knife (die) and upper knife punch) optional with accessories As in the picture, for 200,00 Euro *

Condition: excellent (used), Year of construction: 2021, operating hours: 150 h, functionality: fully functional, machine/vehicle number: 47/11/21, type of input current: three-phase, The VPF series vacuum press is designed for laminating with PVC foil as well as veneering with natural wood veneer. It is suitable for both small and large manufacturing facilities. The VPF Vacuum Press is fully automated and features three operating modes: - Automatic Mode: After pre-setting the working parameters on the PLC controller, the press automatically performs all actions (heating, pressing, cooling). - Manual Mode: The operator manually carries out all operations. - Membrane Mode: Intended for use with a membrane for veneering and laminated bending (also available in automatic mode). Working area: 1400x3000 mm Max temperature: 140°C Power: 30 kW Power supply: 3P 400V 50Hz Dimensions: 3500x1700x2200 mm Weight: 1150 kg APPLICATIONS: - Laminating flat components with PVC foil (kitchen fronts, window sills) - Veneering straight and shaped elements with natural wood veneer (doors, frames, chairs, tables, furniture, coffins) Bwedpfx Aexpqt Dsaqsw - Laminating components with HPL laminates in 2D format (kitchen countertops, window sills) - Pressing of structured surfaces (stone veneer, decorative mats) CONSTRUCTION: - Robust welded frame, powder-coated - Infrared heating system with carbon heaters - Three heating zones with adjustable temperature - Pneumatic cylinders for lifting the heating dome - All-round access to the working table - Integrated PLC controller for automated operation - Equipped with an electronic vacuum control system - Working table surface made from HPL board - Built-in oil-lubricated vacuum pump (100 m³) – 0.9-0.95 bar (9000-9500 kg/m²) - Integrated 100-litre buffer tank - Upper heating dome made of aluminum

Condition: excellent (used), Year of construction: 2020, operating hours: 90 h, functionality: fully functional, Available now: a high-performance Holz-Her 1308XL Edge Bander, manufactured in 2020 and maintained to a very high standard. This compact, powerful machine is perfect for shops looking for professional edgebanding results with maximum efficiency and precision. Machine Details: Make/Model: Holz-Her 1308XL Year: 2020 Condition: Excellent – low hours, clean, and well-maintained Bwsdpoxlcfqefx Aaqow Usage: Light commercial – ideal for joinery and cabinetry work Location: [Insert location] Availability: Immediate Key Features: Glu Jet system for PUR & EVA application Pre-milling unit for perfect edge prep Corner rounding for seamless finishes Touchscreen control panel with intuitive interface Fast heat-up time and energy-efficient operation Compact footprint with high-end capabilities This model offers professional-grade edge quality, ideal for kitchens, furniture, and interior fit-out production. Holz-Her’s build quality and user-friendly controls make this a standout choice for serious workshops.

Condition: good (used), CNC Machining Center HOMAG OPTIMAT BAZ 222/40/K with Edge Banding Unit and Loading Gantry Electronically controlled milling, edge banding, post-processing, and drilling center for the production of furniture parts, solid wood, or similar materials. Bwodpfsxmvtqex Aaqow Two independent Y-axes for the main spindle and edge banding unit Clamping table with 8 clamping consoles Y-1300 mm with hose-free vacuum guidance POWER CONTROL with PC85 controller Software: WoodWOP 5.0 Main spindle: 7.5 kW 12-position carousel tool changer Interface for automatic tool change of machining units with integrated pneumatic/electric/electronic supply and C-axis drive Drill head with 17 spindles Cross-cut saw unit 360-degree edge banding unit / for strip materials: rolls Edge thickness: max. 2 mm with veneer; max. 3 mm with plastic Chip removal conveyor Vacuum pump Busch MM 1322 A, 300/360m3/h (replaced in 2013)

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, AVAILABLE FROM APRIL 2026!! MACHINE IN OPERATION. TOTAL METERAGE AS OF 22/10/2025 – 426,050.00m Return conveyor for elements included in the price! E9001500 Edge Banding Machine, One-Sided "STREAM A" Model CE compliant E9001560 One-sided edge-closing unit, MODEL STREAM A / 6.0 E8000091 Narrow Element Infeed Device E8000086 NC OS Package – Set of devices enabling automation MACHINE CONFIGURATION Includes: - OS-2: 2 NC OSI units on infeed fence and first copying unit for pre-milling. - OS-1: 1 NC OSI unit on edge pressure rollers. E9901008 Pre-installation kit for return system Bwsdjxqb Rcjpfx Aaqew E8000094 Flat air table at machine infeed E8000041 EDGE BAND TAPE POSITIONS – Automatic edge change, NC-controlled, standard NC axis for edge guide device. E8000048 Twin gluing system for use with both EVA glue and granular polyurethane (PUR) glue E8000101 QM-705 Unit for EVA hot-melt adhesives E8000051 Additional glue reservoir for machines with EVA glue capacity with PRE-MELT UNIT. For granular glue only E8000107 Nitrogen unit for PU glue. E4000286 Glue application head and glue tank CC10 preheating and maintenance station E8000038 Adjustable infrared lamp AdIRL-700 E8000314 Pre-milling unit FI-502 with diamond cutters H = 45mm included, Z = 2+2, 30° E8000032 ADZ-700 Anti-stick unit E4000232 Pair of diamond milling cutters H = 65 mm, Z = 3+3, 45° E8000225 IT90-S Saw Unit E8000109 Antistatic fluid applicator for finishing and contour rounding unit E8000405 RS-100 Upper and Lower Edge Milling Unit E8000415 PRO-NESTING KIT for Upper and Lower Edge Milling Unit E0001597 Pair of flat milling cutters with sliding engagement for upper and lower edge milling unit E8000508 RF400 Fine Milling Unit E8000527 "PRO-NESTING" kit for Fine Milling Unit E0001639 Pair of multifunction milling blades for fine milling unit, 25° milling – R = 1 / 1.5 / 2 mm E8000706 Edge Rounding Unit AR30 NC - 2 motors E8000744 Sliding fluid application unit before Edge Rounding Unit E8000718 Additional pair of motors for quick change of finishing milling heads E0001706 Pair of cutters with replaceable blades, R = 2mm – for edge rounding unit E0001708 Pair of cutters with replaceable blades, R = 1mm – for edge rounding unit E8000910 RB400 Edge Turning Unit E8000914 “PRO-NESTING” kit for Edge Turning Unit E0001915 Pair of multi-profile milling bits for edge scraper, 25° inclination – R = 1 / 1.5 / 2 mm E8001011 RCC-701 Glue Turning Unit Kit for sensitive panels for glue scraper unit E4000150 – Independent pneumatic shut-off of upper/lower unit. – Glue system for regulating scraper blade pressure. E8001035 SP-501 Cleaning Brush Unit E8000034 LPT-700 Cleaning liquid applicator for Brush Unit E8001000 PH-700 Hot air blower NSN19000 Parallelogram linear support, scissor type

Condition: used, Etikettierleistung: ca. 3.000 Fl./Std. Formate: 0,75 l verschiedener Größe ausgestattet mit 2 (zwei) Selbstklebe-Etikettieraggregaten zur Applikation - einesVorderetikettes - eines Rückenetikettes auf zylindrische oder geformte Glasflasche 2 (zwei) Nassleim-Etikettieraggregaten zur Applikation - eines Vorderetikettes - eines Rückenetikettes - einer Halsschleife auf zylindrische Glasflasche Etikettenlänge 10-195 mm Etikettenhöhe 10-180 mm Behälterdurcinnesser: 40- 130 mm Behälterhöhe: 140-380 mm Maximale Produktionsleistung: 3.500 Flaschen / Stunde Installierte Leistung: 4 kW - komplett mit Rahmen und Türen aus Edelstahl AISI304 - automatische Geschwindigkeitsregulierung - Kopfliöhenverstellung über Touch Screen Display - Optische Orientierung anhand einer Markierung auf der Kapsel durch Sensoren auf jedem Teller und Tellerrotation mittels Schrittmotoren - Vier (4) Schnellwechselteller - Zwei (2) Etikettiereinlieiten für Selbstklebeetiketten Mod. MAK-AN mit 50 m/min auf beweglichen Stationen am Rahmen der Etikettiermaschine montiert - Zwei (2) Etikettieraggregate auf 4 Achsen, einstellbar mittels Handrad und digitaler Positionsanzeige - Elektrischer Schaltsclnank, wasserundurchlässig, aus Edelstahl AISI 304 - Maschinensteuerung mittels SPS und Touch-Screen-Display Technical Details : working direction : rotative, clockwise, left-right capacity bph max. : 5200 labels : self adhesive labels, cold glue paper labels number of labelling stations : 4 number of bottle plates : 4 orientation : optical orientation using a photocell, bottle plate with stepper motor Bedpfx Aaewm Sapsqoww motor height adjustment : yes speed adjusment : frequence converter

Condition: used, Technical details: voltage: 380 V total power requirement: 4,0 kW machine weight approx.: 1270 kg dimensions L x W x H: 1,4 x 1,0 x 1,9 m Bsdeu Ngfdopfx Aaqoww EDGE CHAMFERING MILLING MACHINE Application: Beveling of circular blanks and flat material -smallest straight edge = 3mm -max. breaking strength of the material = 70 kp/mm (690 N/mm²) -max. feed rate: at 10mm bevel width = 3,1 m/min. at 15mm bevel width = 2,9 m/min. at 20mm bevel width = 2,7 m/min. at 25mm bevel width = 1,5 m/min. with degree adjustment (bevel angle) 25° - 55°. scale for setting the straight edge downholder manual with handwheel cutting wheel size Ø 200mm; teeth fine / medium / rough Support block size: D:220 x W:620 x H:350mm; driving wheel approx. Ø 350 x 100mm; display via linear scale *

Condition: used,

Condition: excellent (used), FULL LINE of Double-side Sizing-Milling & Edge Banding, composed of the following machines: Bwodpfjxftt Eox Aaqew OZ2050A) Loader (Double-cage, double pick-up) "MEINERT" Mod. P 415 D/B - L with central motorized rollers table. With two external roller ways to in-feed the piles (stacks) of panels to loader. OZ2050B) 1st Double-side Sizing & Edge Bander "IMA" Mod. Combima / II / 440 / A / R3 OZ2050C) Connecting Roller Table "IMA" Mod. IDK L/Q with turning device (from lengthwise to crosswise) with double cone system. OZ2050D) 2nd Double-side Sizing & Edge Bander "IMA" Mod. Combima / II / 590 / B / R3 OZ2050E) Connecting Roller Table "IMA" Mod. IDK Q/L with Turning device (from crosswise to lengthwise) with double cone system. OZ2050F) Unloader (Double-Cage, double storage) "MEINERT" Mod. P 415 D/S - L With central motorized rollers table. With 2 on-ground motorized roller ways to out-feed the piles (stacks) of panels from the Unloader.

Condition: good (used), Year of construction: 1999, functionality: fully functional, power: 18 kW (24.47 HP), I am listing this machine on behalf of a customer! The edge bander is ideal for solid wood edges up to 20 mm thickness and 60 mm width! The machine is ready for immediate use. The edge bander is also equipped with a jointing cutter. Solid wood edges up to 60 mm wide and 20 mm thick can be edge-banded with this machine. The machine can still be inspected under power. Bwedpfoxn Nuwjx Aaqsw