Used Straight Edge for sale (6,806)

Condition: like new (used), Several pieces in stock Solar inverter, Inverter 5 kW, SolarEdge SE5K-RW0TEBEN4 Manufacturer: SolarEdge Type: SE5K-RW0TEBEN4 Overall dimensions: 310 x 180 x 530 mm Built-in webserver with Ethernet connection for remote monitoring SetApp version – only the Wi-Fi antenna kit is required for communication High efficiency (max. 97.3%) Fixed conversion voltage Ijdpexukbxofx Ac Ejii Indoor and outdoor use (high protection class IP65) SmartGrid compatible Factory-installed MC4 connectors on the inverter 12-year manufacturer warranty, extendable up to 25 years for an extra fee Attention! The inverter operates only with SolarEdge-compatible smart modules or additional Optimizers! AC power

Condition: new, Year of construction: 2024, functionality: fully functional, working width: 14,000 mm, total length: 17,420 mm, total width: 14,000 mm, total height: 4,850 mm, overall weight: 37,000 kg, New scalping screen available from stock. Edge S18 Dual Power. See brochure with all (technical) details. Iijdpfjv A S Nksx Ac Eoi Shaking sieve, scalping screen, vorsieb

Condition: excellent (used), Year of construction: 2019, operating hours: 4,733 h, functionality: fully functional, fuel: diesel, Three fraction air separator + additional suction fan for midfraction. One owner machine. Ijdpfev Aailex Ac Eeii

Year of construction: 2023, operating hours: 1,200 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 23TRT620048, EDGE TRT 620 demo machine - Immediately available Year of construction: 2023 Hours: 1050 Isdpfxsv Ewz Re Ac Eoii Equipped with the following options: - Remote control - Magnetic belt on the fine fraction - Load control on the bunker belt - Fine fraction belt 180 degrees rotatable - Reversing fan Drum screen / drum screen / drum sieve

Condition: used, functionality: fully functional, Year of construction: 2021, load capacity: 1,500 kg, fuel type: electric, fork length: 1,150 mm, drive type: Elektro, Low lift truck Iijdpjvzzl Esfx Ac Esi Condition: As good as new Technical condition: New Front tires type: Polyurethane Rear tires type: Polyurethane Support rollers, lithium-ion battery, 12 month guarantee

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 220.01.016.22, feed rate X-axis: 18 m/min, workpiece height (max.): 60 mm, rotary table diameter: 750 mm, rotational speed (max.): 12,000 rpm, The machine is being auctioned due to a business closure! Further details on the machine’s equipment can be found in the attached order confirmation. TECHNICAL DETAILS Workpiece height: 8–60 mm Rotary table edge magazine diameter: 750 mm Edge banding material (coil): 0.4–3 mm Rotary table diameter for coil edge material: 740 mm Support surface (workpiece infeed): 600 mm Spindle speed of diamond pre-milling unit: 12,000 rpm Feed speed, chain feed: 10 and 18 m/min Spindle speed, cross-cut saw unit: 12,000 rpm Upper multifunctional milling unit speed: 12,000 rpm Lower multifunctional milling unit speed: 12,000 rpm Cutter assembly: 64 mm MACHINE DETAILS Electrical data Voltage: 400.0 V Phases: 3 Frequency: 50/60 Hz Current: 28.0 A Power: 15.0 kW EQUIPMENT Ball bearing rotary table for edge banding coil material Workpiece infeed and feed fence with manual adjustment Chain feed with two speeds Edge feeding for coil and strip material in single feed Upper and lower multifunctional milling unit x-motion PLUS via smartouch Iodpfx Asxwt Nqoc Eoii Upper and lower radius scraper blade x-motion PLUS Corner rounding unit with motorized adjustment for postforming and softforming profiles Upper and lower polishing units Pneumatic-mechanical infeed stop for workpiece gap monitoring glueBox application unit

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 06601, feed rate X-axis: 12 m/min, empty load weight: 2,500 kg, Equipment: CE marking, TECHNICAL DETAILS Maximum edge banding thickness: 12 mm Minimum workpiece thickness: 10 mm Maximum thickness of roll material: 3 mm Feed speed: 12 m/min Heating time: 10 min Guillotine for trimming: 0.2 – 3.0 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 6,500 x 1,000 x 1,600 mm Weight: 2,500 kg EQUIPMENT Jointing unit with 2 milling units Automatic roll magazine Solid edge magazine Pre-heating of panels by infrared heater Automatic gluing with granulate glue pot Cross-cut saw with programmable angle setting Multi-function unit Isdpfjxuqwmox Ac Ejii Corner rounding/copying unit with 2 motors Profile scraper Flat scraper Buffing unit Unit indicator with mechanical numeric display Control via operator panel Operation via selector switch / push buttons Protective hood CE marking

Condition: used, machine/vehicle number: 008013, X axis working area: 5780 mm Y axis working area: 1650 mm Working Table: Pod and Rail Main Electrospindle power: 13.2 KW Number of controlled axes: 4 axes Maximum edge height: 60 mm Total number of drilling spindles: 16 Iijdpfx Aewuz Ekoc Esi Total number of tool changer positions: 16

Year of construction: 2008, operating hours: 1 h, condition: used, functionality: fully functional, machine/vehicle number: STCOS M5, Burr Oak Single Tube Cut-Off System Model: STCOS M5 Year:2007 Specifications Machine Code: LHM, SWS, 36HF, SCO, SPA, 12ROHG, ECTG Cut-Off - Tcd Standard Hitch Feed - Tcd Standard Straightener – Tcd Standard W/ Sizing Pull-Apart – Tcd Standard Coil Stand – Tcd 3 Position Over Head Uncoiler Runout Table - Tcd 12’ Runout Table W/ Hinge Gate Supply: 480 Volts, 3 Phase, 60 Hertz Iisdpfx Acev Nak Ao Eei Control: 110/24 Volts Extra Options The Hinge Gate Run Out Table Needs To Be Able To Switch From One Side To The Other Tooling – Tcd .500” O.D. Complete Set With 14 Straightening Rolls, 4 Sizing Rolls 6 Pair Clamp Jaws (Total), 1 Exit Guide Tube, (3) Tube Entry Bullets And Connectors .375” O.D. Complete Set With 14 Straightening Rolls, 4 Sizing Rolls 6 Pair Clamp Jaws (Total), 1 Exit Guide Tube, (3) Tube Entry Bullets And Connectors

Condition: used, Used Pontifex approximately 66,000 litre 304L stainless steel dual compartment vertical storage tank. Unit measures approximately 3800mm diameter x 6000mm straight side. Has welded dished top and bottom heads. Mounted on skirt. Specifications: Iisdpfxexw Td Is Ac Esi Capacity: 17,461 gal Diameter: 12.47' Height: 19.68' Type Of Heads: welded dished top and bottom Vertical/Horizontal: vertical Type of stainless: 304L Legs/Lugs: Mounted on skirt Dimensions: 3800mm x 6000mm

Condition: used, Year of construction: 2019, operating hours: 5,400 h, Price: On request What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! - Year: 2019 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: AH00000939 - Operating hours: 5400 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Ijdpsxxlrgefx Ac Eoii Glenn Smeets

Condition: new, The ABS 460 L is a cutting-edge horizontal straight cutting bandsaw from KNUTH, designed for high-performance in the Auto Straight Bandsaw category. Engineered with a torsionally rigid frame composed of robust steel and high-quality linear guides, this machine guarantees precise straight sawing of large, heavy workpieces. Its advanced hydraulic saw frame feed and optical detection of workpiece height automate tasks to optimize efficiency, reducing the operator's workload. The effective material feed system, equipped with hardened guide rollers, ensures high repeatability and dimensional accuracy without the need for complex electronics. Additionally, features such as hydraulic clamping and an easy-to-use central control panel put you in charge of speed settings effortlessly. With a cutting capacity of 460 mm for round materials and 470x460 mm for flat items, this robust machine is your reliable partner for demanding sawing tasks. Request a quote today to discover how the ABS 460 L can elevate your cutting process within the Horizontal Straight Cutting Bandsaws product group. Iijdsq R Rllepfx Ac Eji

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 80709, plate height: 45 mm, empty load weight: 2,900 kg, operating speed: 333 mm/s, Equipment: CE marking, TECHNICAL DETAILS Maximum panel thickness: 45 mm Edge band thickness: 13-60 mm Maximum edge material thickness in rolls: 3 mm Minimum panel width: 50 mm Minimum panel length: 150 mm Working speed: 10 - 20 m/min MACHINE DETAILS Electrical Data Voltage: 400 V Frequency: 50 Hz Dimensions & Weight Dimensions (L x W x H): 4,950 mm x 1,700 mm x 1,530 mm Weight: 2,900 kg EQUIPMENT Glue pot VC 700 End trimming unit 701 Edge trimming unit RS 700 Corner rounding CR 200 Tilting edge trimming and chamfering unit RI 700 Compact edge scraper RBK501 Brushes SP700 Edge sanding unit LV 700 Heated infeed guide PLC control Panel support guide Large-diameter roll holder Edge cutting device for 3 mm thick rolled edges CE certification Isdpfoxuqufox Ac Ejii

Condition: used, Year of construction: 2013, Used machine Year of manufacture: 2013 Features and technical specifications: - Belt dimensions: 2600 × 200 mm - Worktable: 935 × 460 mm - Auxiliary table at belt tensioning roller: 350 × 350 mm (with round sanding attachment) - Sanding spindle with rubber rollers, supplied with sanding sleeves Ø 30, 40, 50, and 60 mm - Oscillation (can be switched on/off), electromechanical with separate, maintenance-free oscillation motor - Table height adjustment via handwheel, additionally adjustable relative to the sanding belt (forward and backward) - Sanding unit tiltable from -10° to 90°, pivoted via handwheel with digital angle display - Precise angle accuracy ensured by mechanical locking of the sanding unit - Motor power: 2.2 kW - Belt speed: 15 m/s - Feed console with 3-roller feed and veneer device Iijdpfx Aexwz I Isc Eji - Quick changeover from veneer to solid wood sanding - Height-adjustable idle disk table with adapter for dust extraction at the belt tensioning roller - Large-dimensioned mitre fence with stepless angle adjustment and movable ruler - Extraction: adapters Ø 100 mm on both sides (idle disk table, right and left extraction hoods) - 2 sockets 400 V on the machine base (for machine and feed unit) - Torsion-resistant, solid steel base for high running smoothness and stability - Large worktable with sliding surface - Recess in machine base for pallet truck for easier internal transport Dimensions: 1700 x 1000 x 1100 mm Weight: approx. 415 kg Availability: approx. mid-April 2026 Location: Hesse

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, workpiece height (max.): 50 mm, workpiece length (max.): 200 mm, workpiece width (max.): 2,500 mm, rotational speed (max.): 18,000 rpm, Equipment: CE marking, TECHNICAL DETAILS Panel width max.: 2,500 mm Panel width min.: 130 mm Panel height max.: 50 mm Panel height min.: 8 mm Panel length max.: 200 mm Panel length min.: 30 mm UNITS Sizing unit Unit: Trimming Unit: Corrections automatic engagement based on timer Motor power: 2.2 kW Max. speed: 6,000 rpm Magazine for coil Number of positions: 1 Gluing system Glue pot for polyurethane adhesive Prefuser for polyurethane adhesive Prefuser for polyurethane adhesive D4-e Edge pressure roller track Number of pressure rollers: 4 Edge processing unit 1 Unit: Top router Number of motors: 1 Motor power: 0.7 kW Iedpfx Ajxxavtsc Eeii Max. speed: 18,000 rpm Edge processing unit 2 Unit: Top router Number of motors: 1 Motor power: 0.7 kW Max. speed: 18,000 rpm Edge processing unit 3 Unit: Hot air blower Model: APPLICATORE DI FILM Motor power: 0.1 kW Edge processing unit 4 Unit: Brush Number of motors: 2 Edge processing unit 5 Unit: Top router Number of motors: 1 Edge processing unit 6 Unit: Top router Number of motors: 1 MACHINE DETAILS Installed total power: 12 kW Adhesive system: PUR Pressure type: rubber-coated belts Number of units installed in sizing: 1 Number of units installed in edge processing: 6 EQUIPMENT Spraying unit CE marking

Condition: used, Used approximately 42,000 litre capacity 304L stainless steel vertical storage vessel. Unit measures approximately 2,900mm diameter x 6,400mm straight side. Unit has welded flat bottom and welded conical top heads. Unit includes internal access ladder fixed to side wall. Specifications: Capacity: 11,103 gal Diameter: 9.5' Height: 20.9' Type Of Heads: welded conical top Iisdpfx Acoxvqi Ej Eji Vertical/Horizontal: vertical Type of stainless: 304L

Condition: used, Year of construction: 2013, total length: 4,800 mm, total height: 1,700 mm, total width: 900 mm, Weight: 1.250 kg Price: On request Edgebander Serial number: 200.04.007.13 Ijdpfowlv D Nex Ac Esii 400V 11kW 3PH 50HZ 28A multifunction trimming unit Glue unit Workpiece height 8-60mm - Year: 2013 - Documentation available: No - CE certificate present: No - Serial number: 200.04.007.13 - Transport dimensions: 4800mm x 900mm x 1700mm (l x w x h) - Transport weight [kg]: 1250kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, feed rate X-axis: 20 m/min, workpiece height (max.): 60 mm, edge thickness (max.): 12 mm, Equipment: CE marking, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. feed speed: 20 m/min Panel height min.: 8 mm Panel height max.: 60 mm Panel length min.: 150 mm Panel width min.: 65 mm Edge thickness min.: 0.3 mm Edge thickness max.: 12 mm Pre-cutting unit Unit: Corrections Edge pre-heating lamps Glue application system Glue pot for polyurethane adhesive Pre-melter for polyurethane adhesive Edge pressure roller track Number of pressure rollers: 6 End trimming unit Model: 08.415 Number of motors: 2 Motor power: 0.66 kW Max. speed: 12,000 rpm Top/bottom trimming unit Model: 08.0555 Number of motors: 2 Motor power: 1 kW Multifunctional unit Model: SKF-L Number of motors: 4 Max. machining speed: 20 m/min Motor power: 0.18 + 0.400 kW Speed: 12,000 rpm Edge scraping unit Model: 08.519 Glue scraping unit Model: 08.521 Buffing unit Model: 08.617-2 Number of motors: 2 Motor power: 0.18 kW MACHINE DETAILS Number of operating units: 8 Iodpfx Aoxxaucoc Eoii Adhesive system: PUR Control system: WINDOWS EQUIPMENT Programming software for the machine: ICOS open TS CE marking

Condition: used, Used Giusti 2,500 litre 316 stainless steel storage vessel. Internal approximately 1100mm diameter x 2400mm straight side. Has welded dished top and bottom heads. Internal rated 2 bar design pressure at 20 degC. Mounted on 4-legs. Specifications: Capacity: 660.4 gal Diameter: 3.61' Height: 7.87' Iiodpjxvqifefx Ac Esi Type Of Heads: Welded dished top and bottom Vertical/Horizontal: Vertical Type of stainless: 316 Legs/Lugs: 4 legs Dimensions: 1100mm x 2400mm

Condition: used, Year of construction: 2001, total length: 5,650 mm, total height: 1,750 mm, total width: 1,100 mm, Weight: 1.950 kg Price: On request - Year: 2001 Iisdpjxlqpdjfx Ac Eei - Documentation available: No - CE certificate present: No - Serial number: 468/0-103 - Transport dimensions: 5650mm x 1100mm x 1750mm (l x w x h) - Transport weight [kg]: 1950kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, feed rate X-axis: 40 m/min, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, workpiece width (max.): 3,000 mm, rotational speed (max.): 6,000 rpm, TECHNICAL DETAILS Max. feed speed: 40 m/min Panel width min.: 240 mm Panel width max.: 3,000 mm Panel height min.: 8 mm Panel height max.: 60 mm Min. edge thickness: 0.4 mm Max. edge thickness: 3.5 mm Isdpfxoxxal Io Ac Esii UNITS Format Cutting Unit Unit: Double top and bottom pre-milling unit Model: KD 11 Motor power: 4.5 kW Max. speed: 6,000 rpm Magazine for edge tape Number of positions: 12 Gluing system Glue pot for polyurethane adhesive Pre-melter for polyurethane adhesive Edge pressure roller conveyor Edge Processing Unit 1 Unit: End trimming Number of motors: 2 Edge Processing Unit 2 Unit: Top milling unit Number of motors: 2 Edge Processing Unit 3 Unit: Edge trimming unit Number of motors: 2 Edge Processing Unit 4 Unit: Edge trimming unit Number of motors: 2 Edge Processing Unit 5 Unit: Top milling unit Number of motors: 2 automatic engagement by time Edge Processing Unit 6 Unit: Edge scraper Edge Processing Unit 7 Unit: Glue scraper Edge Processing Unit 8 Unit: Brush Number of motors: 2 FEATURES PUR gluing system

Condition: used, Used Braby Ltd approximately 750 litre 316L stainless steel vertical mobile mixing vessel. Unit measures approximarely 1,000mm diameter x 900mm straight side. Unit has welded dished top and bottom heads. Internal rated 6 bar/full vacuum design pressure at 150 deg.c. Unit includes top entry stainless steel 3-blade agitator with Lightnin model LS25V drive/motor. Unit is mounted on 4 legs with castors. Specifications: Iodpsxt Ehqofx Ac Eeii Capacity: 198.1 gal Diameter: 3.28' Height: 2.95' Type Of Heads: Welded Dished Vertical/Horizontal: Vertical Type of stainless: 316L Legs/Lugs: 4 legs with castors Dimensions: 3.28 ft x 2.95 ft

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, feed rate X-axis: 25 m/min, workpiece width (max.): 1,000 mm, workpiece height (max.): 180 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. workpiece width: 1,000 mm Min. workpiece thickness: 3 mm Max. workpiece thickness: 180 mm Max. feed speed: 25 m/min Operating Unit 1 Unit: combined roller/pad Roller material: rubber Operating Unit 2 Unit: vertical pad MACHINE DETAILS Motor power: 1.2 kW EQUIPMENT Work table with fixed height Working level Iedpfx Acjxw U Eao Eeii Feed belt

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, workpiece width (max.): 1,300 mm, workpiece length (max.): 3,200 mm, Equipment: CE marking, TECHNICAL DETAILS Max. feed speed: 24 m/min Maximum panel thickness: 60 mm Minimum panel height: 10 mm Maximum panel height: 60 mm Minimum panel length: 320 mm Maximum panel length: 3,200 mm Minimum panel width: 150 mm Maximum panel width: 1,300 mm Minimum edge thickness: 0.3 mm Maximum edge thickness: 3 mm Number of working units: 8 UNITS Trimming Unit 1 Function: Sizing Model: RT30 Motor Power: 3.5 kW Max. speed: 9,000 rpm Edge Processing Unit 1 Function: End Trimming Model: IT90-S Number of motors: 2 Max. processing speed: 28 m/min Motor power: 0.65 kW Max. speed: 12,000 rpm Edge Processing Unit 2 Function: Edge Milling Model: RF10 Number of motors: 2 Motor power: 1 kW Max. speed: 12,000 rpm Edge Processing Unit 3 Function: Multifunction Model: AR30 Number of motors: 2 Max. processing speed: 18 m/min Motor power: 0.65 kW Max. speed: 12,000 rpm Edge Processing Unit 4 Isdpexw T Tpjfx Ac Eoii Function: Profile Scraper Model: RB40 Edge Processing Unit 5 Function: Glue Scraper Model: RC20 Edge Processing Unit 6 Function: Brushing Model: SZ30 Number of motors: 2 Motor power: 0.37 kW Max. speed: 1,400 rpm MACHINE DETAILS Installed total power: 25 kW Dimensions Conveyor length: 12,300 mm Width: 1,300 mm Length: 12,300 mm EQUIPMENT Jointing cutters Multifunction unit Top pressure Pressure via rubberised belts Panel support guide NC positioning Angled panel infeed system Automatic engagement by time Edge preheating lamps Coil magazine Hot-melt glue pot Hot-melt glue pre-fuser Edge pressure roller conveyor Spray unit SINTRA machine programming software Panel discharge via roller transfer conveyor Panel feed via motorised carpet belt Return system for left-side edge bander CE marking

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, feed rate X-axis: 25 m/min, edge thickness (max.): 3 mm, rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS Minimum edge thickness: 0.3 mm Maximum edge thickness: 3 mm Maximum feed rate: 25 m/min MACHINE DETAILS Edge Processing Unit 1 Unit: End Trimming Model: WK13 Number of motors: 2 Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Unit 2 Unit: Top Milling Number of motors: 2 Motor power: 0.55 kW Max. speed: 12,000 rpm Edge Processing Unit 3 Unit: Multifunction Model: FK13 Number of motors: 2 automatic tool change with NC positioning Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Unit 4 Unit: Top Router Model: UF11 Number of motors: 1 Motor power: 4 kW Max. speed: 9,000 rpm Edge Processing Unit 5 Unit: Edge Scraper Model: MN21 with NC positioning Edge Processing Unit 6 Unit: Glue Scraper Model: FA11 Isdexw T H Nspfx Ac Esii Edge Processing Unit 7 Unit: Brush Number of motors: 2 Motor power: 0.25 kW Edge Processing Unit 8 Unit: Brush Number of motors: 2 Motor power: 0.25 kW Total installed power: 35 kW EQUIPMENT Spraying unit Machine programming software PowerControl PC22 CE marking