Used Hundegger for sale (24)

Year of construction: 2002, condition: used, functionality: fully functional, Used HUNDEGGER K2-625 for sale. For sale: Hundegger K2 CNC machine with 4 axes, designed for machining wooden beams up to 13m, featuring 2 independent work clamps for sections up to 625mm x 300mm. Equipped with a circular saw unit (800mm), universal milling unit with finger bit and Milano cutter, interchangeable vertical milling unit, horizontal chain saw for groove cutting, vertical drill and hydraulic unit for beam turning. Comes with compressor unit (ELGI EN11-9.5 2022) and air dryer (MKE 155 09/2022), ready for installation and use. CE compliant. Dwodjycg Sqepfx Ai Ejd Machine is in fully operational condition. Sold with tooling and spare parts. Price upon request. Videos available upon request.

Condition: like new (used), Year of construction: 2020, operating hours: 1,329 h, functionality: fully functional, Equipment: safety light barrier, Hundegger SC 3 Speed-Cut – model year 2020, for sale due to new acquisition in May 2027. We are selling our fully automatic cutting system, Hundegger SC3 Speed-Cut, model year 2020. Machine equipment: - SC 3 Fully automatic cutting system, base machine with 5-axis sawing unit – mirrored version - Hundegger production software CAMBIUM - Automatic cross-section control, Y-axis - Central lubrication - Combination support for vertically operating tools - Vertical finger milling cutter, 5.5 kW - 4-axis turret milling unit, 7.5 kW - Combination support for horizontally operating tools - Drilling unit, 2.2 kW, drilling direction horizontal Dwedpfx Aiez Dga Te Esd - Marking device, bottom - Marking device on horizontal support - Inkjet labeling system Inkjet 4 from the rear - Automatic feeding of small components to the front - Wood storage blocks with rollers after feeding - Control unit for disposal with operating buttons Retrofit in May 2023 for €8,500: SC 2100 Drilling unit, 2.2 kW, drilling direction vertical on combination support for drilling up to 24 mm 4-side inkjet labeling system Inkjet 4 FEEDING SYSTEM ALSO INCLUDED IN THE PRICE!!! BEBL feeding system, transverse and vertical General: Year of manufacture: 2020 Operating hours: low, approx. 1329 hours (machine from ongoing operation) Material processed: 2272 cubic meters Routine maintenance by Hundegger Condition: very good, like new Contact: Holzbau Gutmann GmbH Reulbacherstraße 18 36115 Hilders

Condition: used, Year of construction: 2011, operating hours: 7,000 h, functionality: fully functional, machine/vehicle number: 9615, total length: 31,200 mm, total height: 2,300 mm, total width: 4,600 mm, overall weight: 9,000 kg, Equipment: rotational speed infinitely variable, safety light barrier, SC3-200-5 fully automatic cutting system Angle and inclination drive for the sawing station Automatic infeed system Feed cross conveyor (6 strands, wood length up to 14 m) Dsdpfxozyihue Ai Eswd Component support for small cross-sections Control unit for waste disposal Conveyor belt for waste disposal (integrated) 6-arm stacking table (wood length up to 10 m) Combination support for vertically operating tools 2x Vertical drilling unit 2.2 kW 2x Vertical chain mortiser 5.5 kW Additional combination support, vertical, for rotary milling cutter Rotary milling head 7.5 kW Combination support for horizontally operating tools 2x Horizontal drilling unit 2.2 kW Marking device, rear Marking device, bottom Marking device, front Angled conveyor, right

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, For sale: Hundegger SC 480 Speed-Cut – Year 2023 We are selling our fully automatic cutting system, the Hundegger SC 480 Speed-Cut, from 2023. Machine equipment (excerpt): - SC 480 Fully automatic cutting system, base machine with 5-axis sawing unit – mirrored version - Hundegger production software CAMBIUM - Line laser for component referencing - Infeed and outfeed cross conveyor 10.1 m, 7 strands (for timber lengths up to 13 m) - Hydraulic lifting table for timber length 13 m (6 t) - Vertical finger milling cutter 6.5 kW and 10 kW HSK spindle - 4-axis revolver milling cutter 7.5 kW universal unit - Drilling unit 3.0 kW hydropneumatic Dwsdoza Dzdspfx Ai Ejd - Grooving unit - Inkjet labeling system (max. 101.6 mm) - Label printer system on the component discharge area - Discharge table, pneumatic, for timber lengths up to 13 m - Central lubrication system - Various other options and units General: Year of manufacture: 2023 Operating hours: low (machine from ongoing operation) Regularly maintained by Hundegger Condition: very good Contact: Philipp Schöb, Schöb AG, Haagerstrasse 80, 9473 Gams

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, overall weight: 8,000 kg, Hundegger SC1 Year: 2005 It is being sold in excellent condition as seen in the pictures. We will help you disassemble and load the machine. Djdpfx Aszzx Dboi Eewd

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 1877, cutting height (max.): 300 mm, total length: 18,500 mm, total height: 2,550 mm, cutting width (max.): 450 mm, total width: 2,400 mm, control cabinet width: 400 mm, saw blade diameter: 735 mm, overall weight: 11,000 kg, control cabinet length: 1,600 mm, control cabinet height: 2,400 mm, power: 15 kW (20.39 HP), type of input current: three-phase, Equipment: safety light barrier, Equipment: 01_ Cross-sections 20 x 60 to 300 x 450 mm 02_ Feed conveyor, transverse, 5 strands, 2.2 m 03_ Undercutting miter saw 04_ Universal milling machine ----> Roller cutter ----> Finger cutter 05_ Combination support for vertically operating tools ----> 1x Drilling machine ----> 1x Finger milling machine 06_ Combination support for horizontally operating tools ----> 2x Drilling machine ----> 1x Grooving machine 07_ Beam turning station, fully automatic Machine installation: 08_ Substrate, foundation: ----> The floor slab must have a thickness of at least 10 cm (with corresponding good reinforcement) This should be level and suitable for anchoring. 09_ Power requirements, type, quality, quantity: 09.1_ Electrical: Dedjzv Tt Hspfx Ai Eewd ----> Voltage: 400/230V, 3/N/PE ----> Fuse rating: 3 x 63A ----> Frequency: 50 Hz ----> Peak demand: 15 kW The mains voltage must be constant and uninterrupted within the specified tolerance range! 09.2_ Compressed air: ----> Flow rate: V < 600 l/min ----> Pressure: Operating pressure p = 8.5 bar; Maximum permissible pressure p = 10 bar Important: The control system was converted by Hundegger from MIPPS to CAN control in the fall of 2020!!

Condition: like new (used), Year of construction: 2024, functionality: fully functional, For sale is a like-new Hundegger Speed-Cut SC480, including a fully automatic loading system, Pick & Feed 1000. Speed Cut SC480 Dwedpez Da Htjfx Ai Eod Processing range: - Timber cross-sections from 20 × 40 mm to 240 × 480 mm - Timber lengths up to 13 m Equipment: - 5-axis sawing unit - Infeed and transfer cross conveyor for timber lengths up to 13 m - Hydraulic lifting table for timber lengths up to 13 m - Combination support for vertically operating tools - Drilling unit 3 kW, drilling direction vertical - Vertical finger milling cutter 6.5 kW - 4-axis revolving milling cutter 7.5 kW - Drilling unit 3 kW, drilling direction horizontal - Single-blade milling cutter - Marking device at the rear - Inkjet labeling system HP (from the rear) - Label printer at the control panel - Central lubrication - Additional screen at the control panel - Additional screen in the discharge area - Floating dust extraction Pick & Feed 1000 Fully automatic loading system: - For timber lengths up to 13 m - 10 rack positions Special features: - System has been in operation since January 2025 - Extensive special equipment - Immediately ready for use - Ideal for timber construction, prefabricated construction, and joinery businesses Inspection: The machine can be inspected by appointment. We will gladly provide further technical information, photos, or videos. Location: Switzerland, Canton of Bern

Condition: good (used), Year of construction: 1992, functionality: limited functionality, machine/vehicle number: 1200, Hundegger P10 – Year of manufacture 1992 – partially modernized control system – good mechanical condition For sale: well-maintained Hundegger P10 cutting machine, year of manufacture 1992, with extensive equipment. Mechanical components in good condition, control system modernized (data import via USB drive, DOS conversion). 3 measuring scales are missing – the price reflects this. The machine is currently still in operation and can be tested on-site. Technical equipment: Swivel saw, notching milling cutter, rafter nail drilling unit, edge bender, blade milling cutter, horizontal and vertical drill Three-sided cutter, vertical milling cutter, finger cutter, panel cutter, ejector and transverse conveyor Dsdpfx Aiozu Anwo Ejwd For an additional charge, the machine can be delivered throughout Europe – Delivery does not include unloading or assembly. Currently, the cutting system is being dismantled for transport and temporarily stored. A demonstration in operation is no longer possible. However, a video in processing mode can be provided for a better assessment.

Condition: excellent (used), Year of construction: 2008, Hundegger K2i 625x300mm Undercounter Miter Saw, 11KW saw blade, 800mm, Universal milling unit, 5-axis, Combined support for vertically operating tools, Combined support for horizontally operating tools, Drilling unit 2.2KW, 1x vertical 18mmx460mm and 2x horizontal 7mm, 8mm x650mm. Fully automatic beam turning station, hydraulic, K2i transport and positioning system, electronic control, 6-arm discharge table, Vertical finger milling cutter 5.5 KW, Longitudinal and transverse grooving cutter 15.5-30mm, Marking and labeling devices on the bottom and back, refined support surfaces (chrome-plated), Adjustable safety impact shield, left and right, saw blade 900 mm. The system is ready for demonstration. Dwjdpfx Ajww Nuxei Esd Availability: January 2027.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, cutting width (max.): 450 mm, working length: 16,000 mm, working width: 450 mm, Equipment: safety light barrier, A well-maintained Hundegger K2 cutting machine with a planer is offered for sale. The machine is fully functional and has been serviced several times a year by Hundegger. The machine is still in operation until the beginning of November and can then be dismantled by the buyer. =Equipment: = Machine type K2-5-450 - Wood length, feed and discharge max. 16m - Color RAL 5012 blue - Feed cross conveyor, 6 strands, horizontal, 2.2 m with flat belt chains - Extendable wood discharge - Undercarriage swivel miter saw - Universal milling cutter, 5-axis UFS (roller cutter, finger cutter, dovetail cutter) - Combination support for vertically operating tools (finger cutter, drilling unit 2.2kW) - Combination support for horizontally operating tools (drilling unit 2.2kW, drilling unit 2.2kW) - Marking device at the front - Discharge table, 6-arm - Beam turning station, hydraulic Dwedpfxezb I Iwo Ai Eod - Enhanced wood support surfaces (the vulnerable plastic coating has been replaced with maintenance-free stainless steel, chrome-plated tables, stainless steel rollers) - Extension roller conveyor, 10m with feed roller - Transfer cross conveyor, 7 strands, 3.5m with flat belt chain - Connection to planer HMD = Planer HMD - Fully automatic 4-sided planing and chamfering - Planer motors 7kW - Automatic thickness planer adjustment - Direct planer control - Planer machine directly integrated after the cutting machine = Other - Inspection possible by appointment. - If the machine is being dismantled, it can of course also be inspected in the operating environment. - A new K2 with a planer and comparable equipment costs approximately 800,000 euros. - New spare parts in stock can be included at a favorable price. - The machine runs perfectly, however, no guarantee or liability is assumed for future damages. - Ideal machine for medium to large carpentry or sawmill operations. = Contact - Friedrich Hirsch GmbH - Schwaig 2, 3351 Weistrach, Lower Austria - Managing Director and Owner: Friedrich Hirsch - If you have any questions, please call us from Monday to Friday from 7:00 a.m. to 12:00 p.m. and from 1:00 p.m. to 5:00 p.m. or send an email at any time. - Unfortunately, I cannot provide a mobile phone number, as the advertisement would otherwise be blocked.

Condition: used, Year of construction: 1997, A timber framing machine with a beam turning station is offered. Equipped with: a 5-strand infeed cross conveyor (220cm), extendable timber support and extendable roller supports for timber lengths over 1000cm, an under-table swivel crosscut saw with an open base and a vibrating table, a universal milling unit with a roller cutter and a finger cutter, a combination support for vertically operating tools with two drilling units and a slotting unit, stop-side and operator-side marking units, a fully automatic beam turning station, a waste disposal control unit with operating buttons, a timber length measuring system, a 5-arm outfeed table. Inspection possible by arrangement. Dwsdpfj Ah H Rkjx Ai Ejd

Condition: excellent (used), Year of construction: 2001, machine/vehicle number: 11193, functionality: fully functional, type of input current: three-phase, workpiece length (max.): 13,000 mm, workpiece width (max.): 450 mm, workpiece height (max.): 280 mm, overall weight: 14,000 kg, year of last overhaul: 2019, Equipment: CE marking, The machine underwent a complete factory overhaul by Hundegger in 2019. The machine will be available from April 2027. Until then, it can be viewed in full operation at our facility by appointment. Machine equipment: Infeed roller conveyor with a 5-chain cross-transfer system Rotating under-table saw Under-table saw hood 4-axis universal milling unit (UF4) Combination support for vertical tooling Vertical milling unit, 5.5 kW 2 drilling units, 2.2 kW each Combination support for horizontal tooling Drilling unit, 2.2 kW Swiveling horizontal drilling unit, 2.2 kW Milling unit, 3.0 kW End marking device Fully automatic beam turning station "Two-hand system" transport and positioning system Dwedpozi Spmofx Ai Eed 2.65 m outfeed roller conveyor 6-arm stacking table Electronic control system Protective cover above the waste disposal area

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 1877, cutting height (max.): 300 mm, total length: 18,500 mm, total height: 2,550 mm, cutting width (max.): 450 mm, total width: 2,400 mm, control cabinet width: 400 mm, saw blade diameter: 735 mm, overall weight: 11,000 kg, control cabinet length: 1,600 mm, control cabinet height: 2,400 mm, power: 15 kW (20.39 HP), type of input current: three-phase, Equipment: safety light barrier, Submitting a bid obligates the bidder to collect the machine by week 46. TECHNICAL DETAILS Machining area Cross-section: 20 × 60 to 300 × 450 mm Material feeding Feed cross conveyor: 7 strands Conveyor length: 2.2 m Saw unit Saw: Undercutting swivel miter saw Milling units Milling unit: Universal milling machine Tools for universal milling machine: Roller cutters and finger cutters Vertical combination support Drilling units: 1 unit Finger cutter: 1 unit Horizontal combination support Drilling units: 1 unit Grooving unit: 1 unit Workpiece handling Beam turning station: fully automatic Foundation and installation Minimum thickness of floor slab: 10 cm Requirement for floor slab: level, adequately reinforced and suitable for anchoring Electrical data Voltage: 400/230 V, 3/N/PE Fuses: 3 × 63 A Frequency: 50 Hz Peak demand: 15 kW Compressed air supply Dwodpfs Aayqwsx Ai Esd Volume flow: max. 600 l/min Operating pressure: 8.5 bar Permissible pressure: max. 10 bar Control system Retrofit: Autumn 2020 by Hundegger Control system: CAN control Previous control system: MIPPS

Condition: used, Year of construction: 2010, machine/vehicle number: 9532, total height: 3,000 mm, total length: 30,000 mm, total width: 3,000 mm, Hundegger SC-3 – CNC Through-Feed Processing Center (Year 2010) Hundegger SC-3 CNC Through-Feed Processing Center For sale is a Hundegger SC-3, year of manufacture 2010, a proven and high-performance CNC through-feed processing center for modern timber construction and industrial wood processing. This machine is ideally suited for timber framing, prefabricated housing production, and high-capacity woodworking operations, offering excellent precision, reliability, and productivity. Key Features: CNC-controlled through-feed processing center High level of automation and efficient material flow Accurate and reliable cutting of timber components Versatile processing options – with suitable optional units or by retrofit / upgrading, additional operations such as drilling, milling, slotting, marking, and labeling are possible Robust, durable design by Hundegger Technical Overview: Manufacturer: Hundegger Model: SC-3 Year of manufacture: 2010 Condition: used, in operational condition Dwsdjx Rkrfjpfx Ai Eod Location: Estonia Price: on request / according to listing The Hundegger SC-3 represents a cost-effective solution to increase throughput, precision, and process reliability in timber processing. 📩 Further technical details, documentation, and on-site inspection available upon request.

Condition: used, Year of construction: 2000, machine/vehicle number: 11197, Hundegger K2-450 Cutting Machine – Year of Manufacture 2000 For sale is a used Hundegger K2-450 cutting machine, manufactured in 2000, from an ongoing operation. The machine was used for processing wooden components in timber frame and timber house construction and is currently located at Norges Hus Nova OÜ in Perila, Estonia. The machine can be inspected in operation by appointment. Technical Data: Manufacturer: Hundegger Model: K2-450 Year of Manufacture: 2000 Machine No.: 11197 Condition: Used Location: Kuivati tee 10, Perila, Harju County, Estonia Equipment / Notes: Complete infeed and outfeed system available Machine used in a production environment until recently Sale due to modernization or restructuring of production Dismantling and loading upon agreement On-site inspection is highly recommended Dedjzbnkfjpfx Ai Eewd The machine is ideal for carpentry workshops, timber construction companies, and businesses in the cutting field that are looking for a proven and robust Hundegger machine. We are available to provide further information, technical details, additional images, or to arrange an inspection appointment.

Condition: used, Year of construction: 1999, Description of Hundegger K1-A Equipment: 1. Cross-sections: 20 x 60 to 300 x 450 mm 2. Infeed cross conveyor: 7 strands, 2.2 m 3. Undercutting miter saw 4. Universal milling machine - Roller cutter - Finger cutter 5. Combination support for vertically operating tools - 1 drilling unit - 1 finger milling machine 6. Combination support for horizontally operating tools - 1 drilling unit - 1 slotting machine 7. Beam turning station, fully automatic Machine installation: 8. Substrate, foundation: - The base plate must have a thickness of at least 10 cm (with corresponding good reinforcement). - This should be level and suitable for anchoring. 9. Energy requirements, type, quality, quantity: 09.1 Electrical: Dwedpfxs Ah Swws Ai Esd - Voltage: 400/230 V, 3/N/PE - Fuse rating: 3 x 63 A - Frequency: 50 Hz - Peak demand: 15 kW - The mains voltage must be constant and uninterrupted within the specified tolerance range! 09.2 Compressed air: - Flow rate: V < 600 l/min - Pressure: Operating pressure p = 8.5 bar - Maximum permissible pressure p = 10 bar Important: The control system was updated by Hundegger from MIPPS to CAN in autumn 2020. Price ex works, location D-91154 Roth: 25,000.00 EUR

Condition: ready for operation (used), Year of construction: 2000, number of axes: 4, total height: 2,550 mm, total width: 2,400 mm, overall weight: 13,000 kg, product length (max.): 12,000 mm, This 4-axis HUNDEGGER K2-A was manufactured in 2000. It features a workpiece cross-section capacity ranging from 20 x 50 mm to 300 x 450 mm, with a minimum workpiece length of 300 mm in automatic mode. The machine includes various components such as an under-table swivel cut-off saw and a universal milling unit. If you are looking to get high-quality CNC wood machining capabilities, consider the HUNDEGGER K2-A machine we have for sale. Contact us for further details. - Machine Type: Fully Automatic Joinery Machine- Workpiece Cross-Section Min.: 20 x 50 mm- Workpiece Cross-Section Max.: 300 x 450 mm- Minimum Workpiece Length (Automatic Mode): 0.3 m (300 mm)- Operating Voltage: 400 / 230 V (3/N/PE)- Electrical Frequency: 50 Hz- Fusing Protection: 3 x 63 A- Peak Power Requirement: 15 kW- Operating Compressed Air Pressure: 8.5 bar (Max: 10 bar)- Compressed Air Flow Requirement: > 600 l/min- Hydraulic Operating Pressure: 100 bar- Noise Emission Level (LpA): 79 dB(A) ± 3 dB(A)- Transport Dimensions (L x W x H): 12.00 m x 2.40 m x 2.55 m- Included / Equipping Components:* Under-table Swivel Cut-Off Saw with HM saw blade (D=735 mm, s=6.0 mm)* Universal Milling Unit with cylindrical cutterhead (D=350 mm, B=120 mm)* Vertical Combo Support* Horizontal Combo Support* Rafter Nail Drilling Unit* Slotting / Mortising Unit* Infeed & Outflow Conveyors / Positioning Trolleys Dwedpozugw Aofx Ai Eed

Condition: used, Year of construction: 2006, Timber processing machine Manufacturer: Hundegger Type: K2-4-450 Year of manufacture: 2006 Technical data - Maximum timber length for feeding: 13 m - Maximum timber length for stacking: 12 m - Color: RAL 5012 blue - Infeed cross conveyor, 5 strands, horizontal, 2.2 m with flat belt chain - Infeed strand with shaft extension - Extension support with infeed device - Undercarriage swivel miter saw - Universal milling machine, 4-axis, UF4 - Roller cutter - Finger cutter - Dovetail cutter Dwsdpfxozzcx Ae Ai Esd - Combination support for vertically operating tools - Drilling unit, 2.2 kW - Drilling unit, 3.0 kW, reinforced - Combination support for horizontally operating tools - Drilling unit, 2.2 kW - Slotting unit - Marking unit - Stacking table, 6-arm - Fully automatic beam turning station, pneumatic - Refined timber support surfaces - Label printer Note: The technical data and descriptions are a verbatim transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, SPM2 - 2600 - 2600 Can be inspected during operation. Training possible on request - Automatic panel infeed - Lifting table 2600 x 6000 Aggregates - SPM-FF6-23U Finger router 6 Kw max. 23170 rpm - SPM-KSK3 4-axis circular saw unit 3 kW saw blade 220mm - SPM-5F 5-axis milling unit 6.0 kW (special motor 24,000 rpm - 5-axis unit) - SPM-IJ Ink marking system - InkJet HP system Component delivery - SPM-SHP-6000 Special lifting table Panel removal 2600 x 6000 Dwodpfou H Uqcjx Ai Eod - Access guarding of discharge area

Condition: used, total length: 21,000 mm, total height: 2,750 mm, total width: 2,550 mm, Year of manufacture: 2004 Colour: Blue Weight: 8.000 kg Price: On request Dsdpfxsyy Nnqs Ai Ejwd - Details: - └ Description: Available by 05-2026 (depending on delivery of new machine) - Year: 2004 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: 9076 - Main motor power: 15 - Control system: Windows 10 - Max. saw width: 450 - Max. saw height: 160 - Infeed table length: 8200 - Outfeed table length: 8900 - Max. infeed length: 8000 - Opstellengte [mm]: 23000 - Opstelbreedte [mm]: 5200 - Opstelhoogte [mm]: 2700 - Veiligheidsvoorziening: Safety light curtain, Enclosed fence - Options: Waste conveyor belt, Label printer, Marking pen - Voltage [V]: 400 - Fuse [A]: 63 - Power [kW]: 15.0 - Transport dimensions: 21000mm x 2550mm x 2750mm (l x w x h) - Transport weight [kg]: 8000kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: ready for operation (used), Year of construction: 2002, This 4-axis HUNDEGGER K2 was manufactured in 2002, designed for efficient wood beam processing. It features a loading area with motorized chains, a maximum beam length of 13,500 mm, and a working section up to 440 mm × 240 mm. Includes a circular saw and universal milling unit, both with 4 axes, alongside versatile drilling units. Ideal for complex woodworking tasks. Contact us for more information about this machine. • CNC designed for wood beam processing Djdozug D Nopfx Ai Eswd • Maximum incoming beam length: 13,500 mm • Maximum outgoing beam length: 12,000 mm • Maximum working section: 440 mm × 240 mm • 2 independent clamps for transport and positioning (“two-hand” system) • Circular saw unit, Ø 750 mm, 4 axes • Universal milling unit with double output, 4 axes • Lower vertical drilling unit with multi-purpose support • Horizontal drilling unit with multi-purpose support, tilting • Long horizontal chain saw unit, 700 mm, with counter-support system • Includes tool change equipment • Independent control panel • CE compliant Additional equipment • Loading area with 7 motorized transverse chains • Unloading area with 6 arms for parking and storage of parts

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 9076, cutting height (max.): 160 mm, cutting width (max.): 450 mm, power: 15 kW (20.39 HP), TECHNICAL DETAILS Max. cutting width: 450 mm Max. cutting height: 160 mm Infeed table length: 8,200 mm Outfeed table length: 8,900 mm Max. infeed length: 8,000 mm Dsdpfxey Nx Eqe Ai Eowd MACHINE DETAILS Main motor power: 15 kW Power: 15.0 kW Control: Windows 10 Fuse: 63 A Dimensions & Weight Dimensions (L x W x H): 23,000 x 5,200 x 2,700 mm Weight: 8,000 kg EQUIPMENT Safety light curtain Safety fence Waste conveyor belt Label printer Marking pen

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, working width: 450 mm, Equipment: safety light barrier, TECHNICAL DETAILS Working width: 450 mm (limited processing up to 520 mm possible) EQUIPMENT - Safety light barrier - Saw - Universal milling unit with roller cutter - Dovetail cutter - Finger joint cutter - Drilling units: 1x horizontal + 2x vertical Dwsdpfxjyfhi Ne Ai Esd - Slotting device - Marker on stop side - Automatic beam turning station - Wood length is now processed in the feed up to 16m - Control computer with EKP program included

Year of construction: 1993, condition: good (used), Hundegger planer Year of manufacture 1993 4 sides planer and chamfering machine Dedpel Hw Ehefx Ai Eswd