Planer

Hundegger

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 12593, Equipment: safety light barrier, Manufacturer: Hundegger Model: K2i-5-625 Bsdezrkw Iopfx An Uswr Year of Manufacture: 2015 Equipment: K2i-5-625, frame length 15.40 m Color: RAL 5012 blue Input timber length: 13 m Output timber length: 10.3 m Infeed cross conveyor and feed cross conveyor Undertable swivel miter saw, 11 kW Universal milling machine UF5 Roller cutter Finger cutter Dovetail cutter Combination support for vertically operating tools Drilling unit, 3 kW Drilling unit, 2.2 kW Combination support for horizontally operating tools Slotting machine, 7.5 kW Drilling unit, 3 kW Drilling unit, 2.2 kW Longitudinal and transverse groove milling machine Turret milling head - vertical Inkjet printer, rear Marking device, rear Rough timber holder in front of the miter saw UPS (Uninterruptible Power Supply) Beam turning station, hydraulic Refined machine surface Chrome-plated saw table Discharge table and planer not included. Available from: 01/2027 Location: 85625 Glonn Price: €250,000 (negotiable)

Condition: used, Year of construction: 2008, machine/vehicle number: 0-411-49-1873, Technical data: - Manufacturer: Bütfering - Type: Optimat SGO 211/RC - Number of grinding units: 2 - Year of manufacture: 2008 - Working width: 1.100 mm - Grinding belt width: 1.120 mm - Grinding belt length: 1.900 mm - Workpiece thickness: 3-160 mm - Feed speed: 2,5-13 m/min. - Table height adjustment Standard equipment: - Automatic workpiece thickness adjustment - Stepless feed speed via requency converter. - 125 grinding programs can be stored - Wear-free braking system 1. Grinding unit (R) - Calibration roller - Profiled steel contact roller - Diameter 160 mm - Drive motor: 15 kW 2nd grinding unit (C) - Combination unit with roller and grinding shoe - Rubberized contact roller 65 Shore - Contact roller diameter 160 mm - Electronic link pressure bar with segment width 35 mm. - Belt speed: 12 and 21 m/s - Tolerance compensation up to 1 mm - Suitable for veneered surfaces and solid wood. - Drive motor: 11 kW - Total connected load: approx. 28 kW - Operating voltage: 400 V / 50 Hz. - Compressed air consumption at 6 bar, 20 L/min. - Belt blow-off device per pressure surge 440 L/min. - Extraction volume: approx. 2,880 m3/h/ at 20 m/s - Extraction connection: Dedusting: 1 x Ø 160 mm (grinding unit, roller) 1 x Ø 160 mm (grinding unit, shoe) Bodpsyh Hwuofx An Uswr Dimensions: - Length: 1,700 mm - Width: 1,850 mm - Height: 2,100 mm - Location: not in stock - Available from April 2026

Condition: used, Year of construction: 2002, functionality: fully functional, We are offering this operational Hundegger K2-5 62.5 mm cutting machine, manufactured in 2002, for sale. The machine was reassembled at the new location by Hundegger in 2021. The safety features have been updated to the latest standards (€17,000) and the machine has been serviced. From 2021 to early 2022, the machine was completely rebuilt by Hundegger and approved for operation. The company declared insolvency in 2025 and the property was sold. Consequently, the K2, including the HEA 200 support beam and chip extraction system (pusher system), was completely dismantled in operational condition and removed from the site by Hundegger. Invoices for the K2 (2002), safety features, saw blade, milling heads, support blocks (2025), etc., can be provided upon request. The K2 was fully functional, preserved, and dismantled at the Hundegger site and is now in storage. Transport requires 2 semi-trailer trucks, approximately 28.5 tons. Loading can be arranged for approximately €4,000. Manufacturer: Hundegger Model: K2-5 625 Year of Manufacture: 2002 Condition: Operational Category ID: 156 Type ID: 2209 Machine Type: Cutting Machine - Undercarriage pivoting miter saw - Universal milling unit, 5-axis (UF5) - Roller cutter - Finger cutter - Dovetail cutter - Combination support for vertically operating tools - 1x Vertical finger milling machine, 5.5 kW - 2x Drilling unit, 2.2 kW Drilling unit, swiveling 30° (3.0 kW) - drilling direction horizontal - Combination support for horizontally operating tools Bjdpfx Aszrazcjn Uewr - 1x Drilling unit, 2.2 kW - drilling direction horizontal - 1x Drilling unit, swiveling 30° (3.0 kW) - 1x Grooving unit, 7.5 kW Space available for an additional main unit. Control system: KI 2 – KI 3 Additionally, a cabinet with consumables such as lubricants, grease, and rollers is included. A new roller cutter, dovetail cutter, grooving chain, and replacement cutting inserts for the tools are available, as documented by an invoice for €3,800. All necessary documentation from Hundegger for the installation and operation of the machine is available.

Condition: used, Year of construction: 1995, functionality: fully functional, For sale: Hundegger P10 machine, in continuous use. The machine was purchased used, directly from the manufacturer in Germany. Ready for further operation. Possibility to inspect the machine live during operation. Bodpfx Ansxlla De Uswr

Condition: good (used), Year of construction: 1994, 2-sided planing machine, top and bottom Constant table (always the same feed height) Max. planing width: 600 mm Max. planing height: 280 mm Planer shafts with strip knives Bsdpehuthyofx An Uewr Ready for immediate use.

Condition: ready for operation (used), Year of construction: 2000, number of axes: 4, total height: 2,550 mm, total width: 2,400 mm, overall weight: 13,000 kg, product length (max.): 12,000 mm, This 4-axis HUNDEGGER K2-A was manufactured in 2000. It features a workpiece cross-section capacity ranging from 20 x 50 mm to 300 x 450 mm, with a minimum workpiece length of 300 mm in automatic mode. The machine includes various components such as an under-table swivel cut-off saw and a universal milling unit. If you are looking to get high-quality CNC wood machining capabilities, consider the HUNDEGGER K2-A machine we have for sale. Contact us for further details. - Machine Type: Fully Automatic Joinery Machine- Workpiece Cross-Section Min.: 20 x 50 mm- Workpiece Cross-Section Max.: 300 x 450 mm- Minimum Workpiece Length (Automatic Mode): 0.3 m (300 mm)- Operating Voltage: 400 / 230 V (3/N/PE)- Electrical Frequency: 50 Hz- Fusing Protection: 3 x 63 A- Peak Power Requirement: 15 kW- Operating Compressed Air Pressure: 8.5 bar (Max: 10 bar)- Compressed Air Flow Requirement: > 600 l/min- Hydraulic Operating Pressure: 100 bar- Noise Emission Level (LpA): 79 dB(A) ± 3 dB(A)- Transport Dimensions (L x W x H): 12.00 m x 2.40 m x 2.55 m- Included / Equipping Components:* Under-table Swivel Cut-Off Saw with HM saw blade (D=735 mm, s=6.0 mm)* Universal Milling Unit with cylindrical cutterhead (D=350 mm, B=120 mm)* Vertical Combo Support* Horizontal Combo Support* Rafter Nail Drilling Unit* Slotting / Mortising Unit* Infeed & Outflow Conveyors / Positioning Trolleys Bwsdpfxozn I Sbe An Uor

Condition: like new (used), Year of construction: 2015, I sell the automatic CNC working centre for wooden constructions Hundegger K2i. Almost new machine. Year 2011. Bjdpsxtxkxjfx An Uswr Under-table rotary saw with saw blade from 750 mm to 800 mm, 360 degree rotation, servohydraulic tilting 0 – 65 degrees universal 5-axis unit equipped with cylindrical milling cutter, end mill and end mill, milling head diameter 350 mm x 100 mm end mill combi support for at least 5 tools with horizontal drilling device up to power from 2.5 to 3.0 kW, drilling diameter max 24 mm, drill length min 460 mm, machining depth min 300 mm combi support for at least 5 tools with horizontal drilling device up to power from 2.5 to 3.0 kW, drilling diameter max 24 mm, drill length min. 460 mm, machining depth min. 300 mm positioning and gripping of the material using arms, which, while the material is measured, transported to the desired location, the arms keep the processed element as close as possible to the tool that processes it for stability. the processed material can be rotated automatically tolerance +/- 2 mm at a length of 13 m Fully automatic wood input with input roller track and input and sliding cross conveyor K2i: Under-table tilting cross-cut saw K2i: Universal milling unit – 4-axis (UF4) K2i: Kombisupport for vertically working tools K2i: Drilling device (2.2 kW) – vertical drilling direction K2i: Kombisupport for horizontally working tools K2i: Drilling device (2.2 kW) – horizontal drilling direction K2i: Marking tool (rear or on the user side) K2i: Fully automatic element rotation – hydraulic K2i: Transport and positioning system “two-hand system” K2i: Electronic connection K2i: Roller track for removal wooden elements with a pusher K2i: 5-arm storage table K2i: Safety device K2i: Higher quality upper surface of the machine K2i: Extension of the K2i frame to 13.56 m K2i: 5-axis universal milling unit - UF5 (increase to 4-axis) K2i: Remote maintenance (including portable video camera) K2i: Dovetail milling machine (with rotating knives) 60x28x16.5 Suitable for wooden house constructions! Available immediately.

Year of construction: 2026, condition: new, With the separation of milled lumber, laid loose or as a package, already milled lumber can be processed economically. In a two-stage process, the lumber is separated for further processing. It is also possible to insert the separated lumber in a controlled manner in a running process. The feeder is mechanically designed in such a way that even crooked logs can be fed in safely. In addition, it can be adjusted to the diameter of the wood so that only one piece is transported further, thus avoiding stoppages in the further process. Bwedsg Rxhgspfx An Ujr

Condition: ready for operation (used), Year of construction: 2000, A fully automatic 4-axis Hundegger joinery machine is available. Material: structural timber, standard material: softwood, min. timber cross section X/Y: 20mm/50mm, max. timber cross section X/Y: 300mm/560mm, min. timber length in automatic operation: 300mm, max. feed rate: 25m/min, max. hydraulic pressure: 100bar. Saw blade diameter: 735mm, kerf: 6mm, saw blade thickness: 4.4mm, bore: 30mm. Cylindrical cutter diameter: 350mm, cylindrical cutter width: 120mm, cylindrical cutter inner diameter: 55mm. Machine dimensions X/Y/Z: approx. 12000mm/2400mm/2550mm, weight: approx. 13t, control system: Siemens Pentium 400 with Hundegger EKP. Documentation available. An on-site inspection is possible. Bwedpozpyxcjfx An Usr

Condition: good (used), Year of construction: 2019, operating hours: 12,000 h, functionality: fully functional, machine/vehicle number: 7105, feed length X-axis: 16,500 mm, feed length Y-axis: 1,300 mm, workpiece weight (max.): 1,000 kg, cutting height (max.): 300 mm, total length: 45,300 mm, total height: 5,700 mm, cutting width (max.): 1,300 mm, total width: 16,800 mm, control cabinet width: 730 mm, saw blade diameter: 800 mm, overall weight: 31,000 kg, control cabinet length: 4,500 mm, control cabinet height: 2,500 mm, working length: 20,000 mm, working width: 13,000 mm, Equipment: safety light barrier, HUNDEGGER K2-Industry 1300 fully automatic sizing machine, consisting of: 1 ABM-I125 1 K2-Industry 1300 basic equipment, including: - Saw unit 13 kW - Automatic beam turning station - Control panel and switch cabinet - Safety devices Bwjdpoza Ehrsfx An Usr 2 ROB-2500 1 Hundegger production program CAMBIUM 3 ABM-1272 1 Machine frame K2-Industry 1250 - 15.40 m 4 ABM-BO13 1 Transport and positioning device "Two-hand system" - with servo drive in the positioning carriage 5 ABM-3061 1 S-axis universal milling unit (UF5) with 15 kW motor 6 HH-8562 1 Remote maintenance Base machine price 7 ABM-1232 1 Machine frame K2-Industry 1250 - special length - price per meter 8 ABM-1816 1 Extension and encapsulation - Machine enclosure including preparation for dust extraction 9 ABM-2151 1 Infeed cross conveyor and infeed roller conveyor for max. wood length 20 m (8 strands), including servo motor 10 ABM-2800 1 Zero stop for pre-cut components 11 ABM-2851 1 Rough wood holder in front of the universal saw (multi-length processing) 12 HH-8501 1 Adjustable safety impact plate - infeed roller conveyor 13 ABM-3401 1 Horizontal saw 11 kW (saw blade max. 900 mm) 14 ABM-3651 1 Revolving milling unit - vertical (installed from above) 15 ABM-5550 1 Universal cutter UBF 280 16 ABM-BO41 1 Combined support for vertically operating tools (Y-axis electric) 17 ABM-5091 3 Drilling unit 3.0 kW hydraulic - drilling direction vertical 18 ABM-5400 2 Vertical finger milling cutter 5.5 kW 19 ABM-B61 1 Combined support for horizontally operating tools 20 ABM-5030 1 Drilling unit 2.2 kW - drilling direction horizontal 21 ABM-5220 1 Pivoting drilling unit 45° (3.0 kW) - drilling direction horizontal 22 ABM-5751 1 Slotting cutter 7.5 kW - on the stop side 23 ABM-5500 1 Longitudinal and transverse groove milling cutter 24 ABM-5776 1 Slotting cutter 7.5 kW - on the operator side with pre-positioning (Y-axis) 25 ABM-4101 1 Double combined support - (on the stop and operator side) 26 ABM-5041 4 Drilling unit 2.2 kW with hydraulic feed for double combined support 27 ABM-6000 1 Marking device at the rear (on the stop side) 28 ABM-6040 1 Marking device at the front (on the operator side) 29 ABM-6100 1 Marking and labeling device at the bottom 30 ABM-6180 1 Marking and labeling device at the rear (on the stop side) 31 ABM-6300 1 InkJet 4 system HP - on the stop side 32 HH-8610 1 Label printer at the control panel 33 ABM-2900 1 Wood removal hood = flap for removing short components on the under-table swiveling miter saw 34 HH-8640 1 Additional cost for a mobile control panel on rollers 35 HH-8645 1 Direct control of planing machines 36 ABM-7750 1 Line laser for component referencing 37 ABM-8050 1 Additional wood storage point 38 ABM-8300 1 Feed roller from above 39 ABM-8416 14 Extension roller conveyor with adjustable rollers, max. width 1300 mm 40 HH-8521 1 Adjustable safety impact plate - discharge roller conveyor 41 AH-9001 2 6-strand transfer cross conveyor with wide flat belt chain HUNDEGGER Pick & Feed System designed for the following workpiece dimensions: Length: 2,000 - 15,000 mm Width: 100 - 680 mm Thickness: 60 - 300 mm Max. part weight: 400 kg Performance max.: 1 cycle in 1.5 min Stack dimensions: Length: 2,000 - 15,000 mm Width: up to 1,200 mm Height: up to 1,200 mm consisting of: Pos. 1 Lifting gate and package infeed Pos. 2 Portal system with suction gripper Pos. 3 Spacer rack Pos. 4 Safety technology Pos. 5 Stack pattern input aid Pos. 6 Increase max. workpiece weight to 1000 kg

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Vacuum system (with its pump) No. 2 Vertical supporting columns of the top supporting beam No. 1 Horizontal top supporting beam (where the carriage slide on) No. 1 Motorized sliding carriage with horizontal metal arms No. 2 Out-side rollers way (on gound) to in-feed pile of panels to the Loader Out-side motorized rollers table (which receives panels from the Loader) Separate electric and command panel Perimetral safety metal grids Working capacity (cycles/min) 16 (ca.) Min/Max panels thickness mm 10 / 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1300 x 3000 (ca.) Total installed motor power Kw 30 Bwsdpfx Anofi Tg Hs Uer

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 12636, Manufacturer: HUNDEGGER Type of machining center: K2I 450 Year of manufacture: 2015 Machine number: 12636 - Processing cross-sections - Frame length: 13.56 m - Fully automatic timber feed - Infeed roller conveyor - Transfer and feeding cross conveyor - Undercutting miter saw, 11 kW - Universal milling unit, 5-axis (UF5) - Roller cutter - Finger cutter - Dovetail cutter - Combination support for vertically operating tools - 2x Vertical finger milling cutter, 5.5 kW - 2x Drilling unit, 2.2 kW - 1x Drilling unit, 3 kW - Drilling unit, swiveling 45° (3.0 kW) - Drilling direction: horizontal - Combination support for horizontally operating tools - 1x Drilling unit, 2.2 kW - Drilling direction: horizontal - 1x Drilling unit, swiveling 45° (3.0 kW) - 1x Grooving tool, 7.5 kW - Grooving tool (8 x 630 mm) - Revolver milling unit - vertical from above - Longitudinal and transverse grooving cutter - Marking device, rear (fence side) - Marking device, front (operator side) - Marking and labeling device, bottom - Fully automatic beam turning station - hydraulic - Transport and positioning system "Two-hand system" - Electronic control with Hundegger production software - Timber storage with 5 arms Bwodpfxozl Nlke An Uor - Safety devices and guards - Enclosure "Robot" design, AS+EZ area - Refined machine surface - Extension of the transfer cross conveyor and infeed roller conveyor, timber length 13 m - Raw timber holder in front of the universal saw (multi-length processing) - Control unit for disposal with operating buttons - Extension roller conveyor with adjustable (up/down) rollers

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, SPM2 - 2600 - 2600 Can be inspected during operation. Training possible on request Bodou H Uqcjpfx An Uowr - Automatic panel infeed - Lifting table 2600 x 6000 Aggregates - SPM-FF6-23U Finger router 6 Kw max. 23170 rpm - SPM-KSK3 4-axis circular saw unit 3 kW saw blade 220mm - SPM-5F 5-axis milling unit 6.0 kW (special motor 24,000 rpm - 5-axis unit) - SPM-IJ Ink marking system - InkJet HP system Component delivery - SPM-SHP-6000 Special lifting table Panel removal 2600 x 6000 - Access guarding of discharge area

Year of construction: 2022, condition: as good as new (ex-display), Aluminum angled conveyor incl. mobile substructure horizontal area 1,100mm Rising area 1,500mm Pitch angle in bend 60° Total conveyor length: 1,750mm Discharge height: approx. 1,600mm Height of the horizontal: 300mm (feed height) Conveyor belt width 500mm PU conveyor belt including driver and corrugated edge petrol matt Drive: motor 0.25KW, speed 0.2m/sec Connection 220/240V, 50Hz protection class IP54 Drive etc. ready for connection, motor control optional 4x freely steerable transport rollers with parking brake Bodpfx Anji Igiko Uewr 2 pcs. corrugated edges 50x35mm 11 pieces T-50 studs welded on in the middle - 481mm pitch 2-layer particularly laterally stable Usable width 290mm, results as follows: Transverse arrangement -70+30-5+290-5+30-70mm

Condition: excellent (used), Year of construction: 2001, machine/vehicle number: 11193, functionality: fully functional, type of input current: three-phase, workpiece length (max.): 13,000 mm, workpiece width (max.): 450 mm, workpiece height (max.): 280 mm, overall weight: 14,000 kg, year of last overhaul: 2019, Equipment: CE marking, The machine underwent a complete factory overhaul by Hundegger in 2019. The machine will be available from April 2027. Until then, it can be viewed in full operation at our facility by appointment. Machine equipment: Infeed roller conveyor with a 5-chain cross-transfer system Rotating under-table saw Under-table saw hood 4-axis universal milling unit (UF4) Combination support for vertical tooling Vertical milling unit, 5.5 kW 2 drilling units, 2.2 kW each Combination support for horizontal tooling Drilling unit, 2.2 kW Swiveling horizontal drilling unit, 2.2 kW Milling unit, 3.0 kW End marking device Fully automatic beam turning station "Two-hand system" transport and positioning system 2.65 m outfeed roller conveyor Bwedpfezi Spmsx An Uer 6-arm stacking table Electronic control system Protective cover above the waste disposal area