Used Ultimax for sale (75)

Condition: used, CNC Vertical Machining Center HURCO Type BMC 25/M Serial No: ZB9-001-052 Year of manufacture: approx. 1995 Travel distances X: 610 mm, Y: 410 mm, Z: 560 mm Table size (clamping surface) 845 x 400 mm Table size (with coolant groove) 1050 x 500 mm Spindle taper SK 40 Distance spindle nose - table 155 - 710 mm Table load capacity max. 500 kg Overhang 420 mm Spindle speed max. 10,000 rpm Feed rate 3 to 5080 mm/min Rapid traverse 10 m/min Spindle drive approx. 5.5 kW Power supply 400 Volt, 50 Hz Cjdpow Nklhsfx Anwjgt - CNC path control Ultimax 3 with two TFT monitors - Electronic handwheel - Indirect measuring system with rotary encoders on the ballscrew - Tool changer with 20 tool stations - Full enclosure with sliding door - Swiveling control panel - Yaskawa (Japan) spindle drives - Pneumatic-mechanical tool clamp - Without coolant system – pump included – coolant tray missing Machine width 2400 mm Space requirement for transport L x W x H = 3000 x 2400 x 2650 mm Weight 4200 kg Good condition

Condition: used, CNC Vertical Machining Center HURCO Type BMC 30/M Serial No: B3M92202056AB : 9650234 Year of construction 1996 CNC path control Ultimax 3 Travel X: 760 mm, Y: 460 mm, Z: 610 mm Table size (clamping surface) 1010 x 400 mm Table size (with water groove) 1120 x 500 mm Spindle holder SK 40 Distance spindle nose - table 150 - 760 mm Projection 450 mm Spindle speed 80 to 8000 rpm infinitely variable Feed rate 3 to 16,000 mm/min. Rapid traverse 24 m/min. Spindle drive 7.5 kW at 30 min / 5.5 kW at 100% Mains connection 400 Volt, 50 Hz - CNC path control Ultimax 3 (with hardware update e.g. TFT monitors) - Electronic handwheel - Indirect measuring system with rotary encoders on the ball screw spindle Cgsdstrhq Hepfx Anwot - Tool changer with 24 tool positions - Fully protected cabin with sliding door - Rotating control panel - spindle drives Yaskawa (Japan) - pneum. mechanical tool clamp - Coolant unit adjacent, pushed under from behind - trough rinsing Machine width 2400 mm Space required for transportation L x W x H 3400 x 2400 x 2550 mm Weight approx. 4800 kg good condition

Condition: excellent (used), Catalogue number 7316 TECHNICAL DATA - Track width: 350mm - Working width of shaft with saws: 355mm - Max. blade diameter: 450mm - Max. cutting height: 170mm - Blade bore diameter: 70mm - Table dimensions: 1850x790mm Top section: - Pawls - 2 smooth, metal sliding shafts - Shaft with saws - 3 smooth, metal sliding shafts Bottom section: - Guide bar - Pawls - Track - Toothed, metal feed shaft - Central lubrication, electric - Stepless feed speed adjustment - Electric lifting of body up/down approx. 1kW - Feed motor: 2.2kW - Main motor: 75kW - Overall dimensions (L/W/H): 2600x1800x1700mm Csdpfx Aoyz Ty Tonwegt - Weight: 2700kg – Used multi-blade saw – Very good condition Net price: 68,900 PLN Net price: 16,400 EUR depending on 4.2 EUR exchange rate (Prices may vary with larger fluctuations)

Condition: used, Year of construction: 2018, cutting width 300 mm Cgsdjy Ehzmjpfx Anwjt Cutting height 10-120 mm Chain width 300 Motor output 22 kW

Condition: new, maximum load weight: 51,780 kg, overall weight: 65,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available units, on our website. Excerpt of Features. Full equipment list available upon request. Cgsdpfx Ajyhkrlenwet GOOSENECK: * Gooseneck in SNT design for optimized loading platform length, approx. 3,700 mm in length, with rear bevel approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Plug-in steel bulkhead, approx. 400 mm high * ASPÖCK-UNIBOX on the front connector panel with 24N, 24S & 15-pin sockets * 3 kW electro-hydraulic power unit for hydraulic operations (excluding hydraulic winches) * Gooseneck outer beam with fixture boreholes for screw-in lashing rings * One mounting hole in the upper rear area of the gooseneck outer beam for a screw-in lashing ring * 1 pair of screw-in lashing rings included (LC 10,000 daN) * On the gooseneck: 1 pair of plug-in anodized aluminum side walls, approx. 400 mm high * On the gooseneck: 1 plug-in anodized aluminum rear wall, approx. 400 mm high * Heavy-duty hardwood flooring, approx. 40 mm over the gooseneck * 2-inch kingpin * 1 crosswise stake pocket rail in the gooseneck floor in front of the bevel, for plug-in stakes approx. 100 x 50 mm LOADING PLATFORM: * Extendable loading platform, approx. 8,800 mm long, with rear bevel approx. 500 mm x 10° * Recess in the loading platform, extending into the bevel, for excavator dipper stick, approx. 2,490 x 750 x 210/290 mm (L x W x H) * TPMS tire pressure monitoring system per ECE R 141 * BPW axles and suspension, 1st and 2nd axles fixed, 3rd and 4th axles steered * 3rd and 4th axles with electromagnetic reverse lock, activated via reverse gear and manually * Axle load capacity: 12,000 kg each, air suspension with raise/lower valve * Mechanical landing legs with 2-speed gearbox and crank * Hardwood flooring, approx. 50 mm thick, continuous and interrupted between axles (increases friction coefficient) * 1 intermediate table with recessed platform, approx. 300 mm wide, for the large-diameter extension tube with steel treadplate * 1 pair of lashing rings on the front cross-member (LC 10,000 daN) * 6 pairs of recessed, fold-out lashing rings in the outer frame (LC 10,000 daN) * Additional 1 pair of external lashing rings on the front cross-member, rotated approx. 90° towards the loading platform (LC 10,000 daN) * Extendable (galvanized) width extensions approx. 230 mm per side (without wood planks) * 1 pair of permanently installed open wheel recesses up to the extension, approx. 700 x 410 mm (W x D), in the deck ahead of the 1st axle * Between 2nd and 3rd axles, 1 pair of fixed wheel recesses approx. 1,695 x 700 x 410 mm (L x W x D) * 1 pair mechanical rear supports * 245/70 R 17.5 3PMSF twin tires – manufacturer of our choice HYDRAULIC LOADING RAMPS: * DR-15/60-900-4350-HB-HV-M * One pair of two-section steel ramps, approx. 4,350 mm long and 900 mm wide * Hardwood-covered hydraulically foldable ramp ends * Each ramp hydraulically adjustable approx. 235 mm outwards and 215 mm inwards * Hardwood decking on loading platform bevel * Ramps with hardwood overlay BRAKE SYSTEM: * WABCO EBS-E brake system compliant with EU regulations SURFACE TREATMENT: * HRM metallization of the entire chassis with ZINACOR 850 (85% zinc/15% a...

Condition: new, maximum load weight: 36,410 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory with immediately and short-term available vehicles on our website. Extract from the equipment. Full equipment details available on request. GOOSENECK: * Gooseneck in SNT design for optimized loading platform length, length approx. 3,700 mm, rear with taper approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Steel front wall, removable, approx. 400 mm high * ASPÖCK-UNIBOX * 3 kW electro-hydraulic power unit for hydraulic functions, excluding hydraulic winches * Approx. 40 mm thick hardwood decking above the gooseneck * 2-inch kingpin * Gooseneck guide plate for the fifth-wheel plate, approx. 500 mm wide * Bracket at the rear of the gooseneck for ALU loading ramps * Round NATO socket on the front connection panel (Maeler & Kaege VG 96 917) * 4 wheel chocks with holders in front of the front wall * 1 pair of stake pockets recessed on the gooseneck for plug-in stakes approx. 100 x 50 mm (located on the inside of the chassis rail) EQUIPMENT: * Loading platform length approx. 8,800 mm, extendable version approx. 4,100 mm, with rear taper approx. 500 mm x 10° * A recess in the loading platform, extending into the tapered section to accommodate the excavator dipper stick, approx. 2,490 x 750 x 210/290 mm (L x W x H) * Pneumatic locking with conical locking bolts and reinforced locking positions, supply lines are protected inside the extendable beams and automatically adapt to the selected loading platform length * TPMS tire pressure monitoring system in accordance with ECE R 141 * BPW axles and suspension, 1st and 2nd axles rigid, 3rd axle steered * 3rd axle with electro-magnetic reverse lock, activated via reverse gear and manually * Technical axle load: each 12,000 kg with air suspension and raise/lower valve * 235/75 R 17.5 3PMSF twin tires. Manufacturer at our discretion * Mechanical landing legs with 2-speed gearbox and crank. JOST Module B – static test load = approx. 50,000 kg * Throughout the loading platform and between the axles, interrupted approx. 50 mm thick hardwood decking (increases coefficient of friction) * 1 intermediate table, approx. 300 mm wide, for the telescopic tube with large cross-section. Intermediate table with offset loading platform and extendable mounting rails for aluminum bridging elements * Platform locking with conically welded locking profiles every approx. 250 mm. Includes pre-tensioning plate * 1 pair of lashing rings on the front cross member (LC 10,000 daN) * 9 pairs of recessed lashing rings in the outer frame of the loading area, foldable outwards (LC 10,000 daN) * 1 pair of fixed wheel recesses in front of the axles, open up to the gooseneck cross member, approx. 700 x 410 mm (W x D) * Wheel recesses with 15 x 15 mm square climbing strips and widenings at the bottom (in case vehicle is equipped with extendable widenings) * 1 pair of fixed wheel recesses, approx. 1,480 x 700 x 410 mm (L x W x D), in the platform between 1st and 2nd axle * Wheel recesses with 15 x 15 mm square climbing strips and widenings at the bottom Cgjdpfx Asy Auh Isnwot * Aluminum covers for the wheel recesses in front of the axles and between the 1st and 2nd axle, which can also be used as widening planks (if vehicle is equipped with extendable widenings) * Lockable aluminum elements installed on the extension tubes of the widenings * 1 pair of mechanical rear supports * 1st axle with traction aid * Sandblasting painted...

Condition: new, maximum load weight: 36,500 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You will find our entire inventory of immediately and short-term available vehicles on our website. For a complete list of equipment, please enquire. SPECIFICATION: GOOSENECK: * Gooseneck in SNT design for improved platform length, approx. 3,700 mm long, rear with approx. 1,000 mm x 6° taper * For tractor units: 4 x 2 and 6 x 2 * ASPÖCK-UNIBOX * On the gooseneck and rear taper: open grating with 5 mm steel reinforcement * 2-inch kingpin * Guide plate from gooseneck for the fifth wheel, approx. 500 mm wide * Round NATO connector on the front panel (Maeler & Kaege VG 96 917) * On the gooseneck: 1 pair of removable ALU side panels, approx. 400 mm high, anodized finish * 1 LED work light each, left and right, mounted at the top of the front wall, wired to the coupling panel for the tractor unit CARGO AREA: * Platform length approx. 9,600 mm, with rear slope approx. 900 mm x 6° * Hydraulic lift/lowering section after gooseneck, length approx. 3,000 mm, rated for up to approx. 9,000 kg * Continuous open grating on lift bed and platform with approx. 5 mm steel underlay for reinforced point loading TYRES: 235/75 R17.5, 3PMSF, twin tyres. Make at our discretion * TPMS tyre pressure monitoring system compliant with ECE R 141 AXLES: * BPW axles and suspension, 1st and 2nd axle rigid, 3rd axle steerable * 3rd axle with electro-magnetic reverse lock, activated via reverse gear and manually * 1st axle with starting aid Cjdpsy Auhhefx Anwsgt * Technical axle load: 12,000 kg per axle * Air suspension with raise/lower valve HYDRAULIC LOADING RAMPS: * 1 pair of AXS steel ramps, two-part, open grating surface, length approx. 4,920 mm, width approx. 900 mm * Hydraulically folding ramp tips * Each ramp hydraulically adjustable by approx. 235 mm outward and approx. 365 mm inward * Strobe lights at ramp tips, switch positioned next to ramp controls * Ramp transport lock in driving position with quick-release * Painted non-slip coating on outer frame and ramp tip * Mechanical drop-leg side supports integrated in ramps, to assist with dock alignment * Ramp control valves on right side of vehicle BRAKE SYSTEM: WABCO EBS-E braking system, compliant with EU regulations SURFACE TREATMENT: * Entire chassis HRM metallized with ZINACOR 850 (85% zinc / 15% aluminium) for superior corrosion protection PAINTWORK: * Trailer body Carmine Red (RAL 3002) * Rims Silver Grey * Side walls Aluminium natural finish * Hub caps as per axle manufacturer * License plate holder Pure White (RAL 9010) EQUIPMENT: * Front wall made of steel, removable, approx. 1,600 mm high, incl. coupling panel for supply lines to tractor unit, mounted approx. 1,000 mm from the lower edge of the outer frame * Lashing chain anchor points inside left and right on front wall incl. aluminium trays below left and right for stowing chains or straps * Behind the front wall: approx. 12 mm thick DELIGNIT panel, bolted * Additional 2 pairs of bolted lashing rings (LC 5,000 daN) * Electric cable winch, approx. 5,400 kg pulling power, with remote control. Steel cable approx. 24 m long, 9.5 mm diameter, incl. cable pressure roller * Deflection pulley for the winch, with shackle and bolted lashing point

Condition: used, Year of construction: 2012, Carrying capacity: 28.200 kg GVW: 11.800 kg General condition: average Technical condition: average Visual appearance: average Production country: BE Please contact Christian Theißen for more information Manufacturer: Faymonville Model: Multimax STN-4UBX Year of build: 2012 Condition: Used Data: First registration: 27.02.2012 Total dimensions LxWxH: 13,65 x 2,55 x 4 m Empty weight: 11.800 kg Total permissible weight: 40.000 kg Payload: 28.200 kg Number of axles: 4 Special features: Self-steering trailing axle, hydraulic lifting bed to the gooseneck Cedpsyt Ikcsfx Anwsgt Information: Location: Essen immediately available.

Condition: new, Year of construction: 2022, functionality: fully functional, power: 510 kW (693.41 HP), INDUSTRIAL HOT WATER AIR HEATERS – COMPLETE LOT Sale of a complete lot of 70 industrial hot water air heaters, brand FläktGroup, model MultiMAXX HN41. Brand new equipment, never used, year 2022. Power supply: 3×400 V – 50 Hz Electrical power: 510 W Cjdpfx Aoyxn A Dsnwjgt Protection rating: IP54 Hot water exchanger: 130 °C – 1.6 MPa Installation: ceiling or wall-mounted Applications: warehouses, industrial buildings, logistics, workshops. Homogeneous lot, stored in warehouse, immediately available. Sale only as a complete lot.

Condition: new, Year of construction: 2026, cutting width 450 mm Cgedpfxoyk Icge Anwst Weight 5500 kg work height max. 850 mm

Condition: new, Year of construction: 2026, cutting width 450 mm voltage 400 V Weight 5500 kg Cjdeyk H Unjpfx Anwjgt

Condition: used, functionality: unexamined, Combi steamer Eloma Model Multimax B 10-11 Cooking functions: hot air and steam 11 shelves for GN 1/1 Stainless steel construction Cedpfsvktcbox Anwjgt Connection: 400V, 17.1 kW, 32A-CEE plug Approx. dimensions: 925 x 810 x 850 mm (W x D x H) Used unit Delivery service Many more machines in stock!

Condition: new, overall weight: 80,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, More vehicles available. Excerpt from the equipment list below. Full equipment details on request. GOOSENECK: * Gooseneck in SNT design, optimized for loading platform length, approx. 3,700 mm long, with rear bevel approx. 1,000 mm x 10° * Suitable for tractors: 4 x 2, 6 x 2, and 6 x 4 Cgedjxarmajpfx Anwot * Detachable steel front wall, approx. 400 mm high * ASPÖCK-UNIBOX at the front connection rail with 24N, 24S & 15-pin sockets * 3 kW electro-hydraulic unit for controlling all hydraulic functions except hydraulic winches * Gooseneck outer rail with mounting holes for screwable lashing rings. First hole approx. 200 mm from front, then approx. every 400 mm. 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of horizontal lashing rings at rear part of gooseneck (LC 10,000 daN) * On the gooseneck: 1 pair of plug-in aluminum side walls, approx. 400 mm high, anodized finish * On the gooseneck: 1 plug-in aluminum rear wall, approx. 400 mm high, anodized finish * Approx. 40 mm hardwood floor covering on gooseneck, checker plate covering over kingpin * 3.5-inch kingpin * Gooseneck guide plate for the fifth wheel, approx. 500 mm wide * Round NATO socket at the front connection rail (Maeler & Kaege VG 96 917) * 2 pairs of lashing rings with retention spring hanging on the outer rails of the gooseneck (LC 5,000 daN) LOADING PLATFORM: * Extendable loading platform, length approx. 8,800 mm with rear bevel approx. 500 mm x 10° * Pneumatic locking with conical lock bolt and reinforced locking positions; supply lines routed securely inside the extendable rails, automatically adapting to the current platform length * BPW axles and suspension; 1st axle steerable, all others force-steered via hydro-mechanics * 1st axle with electro-magnetic reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each * Air suspension with lifting/lowering valve * 235/75 R 17.5 3PMSF twin tires – brand at our discretion * Mechanical landing gear with 2-speed gearbox and crank. JOST Modul B – static test load 50,000 kg * Full-length hardwood floor, interrupted between axles, approx. 50 mm thick (increases slip resistance). – Long slots for removable and repositionable bridging elements * At the front of the platform – 1 movable intermediate table, approx. 300 mm wide, for the large-cross-section sliding tube, with checker plate covering. – Front and rear with long slots for removable and repositionable bridging elements * 1 pair of lashing rings on front cross member (LC 10,000 daN) * 7 pairs of flush-mounted, fold-out lashing rings in the outer frame of the platform (LC 10,000 daN) * Extendable (galvanized) widened sections, approx. 230 mm per side (without wooden planks) * 1 pair of mechanical rear supports * Rear steering operable from front and rear via cable remote control, with single-track control of axles, without installation on the tractor * TPMS tire pressure monitoring sensors fitted to all wheels * Deck locking with conically welded locking profiles every 500 mm * Lock monitoring left and right on the trailer * Mechanical lock for intermediate table (approx. 300 mm wide) to secure the table when extended * 5 pairs of threaded blocks mounted on the extendable rail for the installation of M20 screw-in rings (LC 5,000 daN) BRAKING SYSTEM

Condition: new, empty load weight: 1,630 kg, maximum load weight: 970 kg, overall weight: 2,600 kg, axle configuration: 2 axles, loading space length: 3,780 mm, loading space width: 1,810 mm, loading space height: 2,300 mm, loading space volume: 15.7 m³, color: black, construction height: 2,680 mm, working width: 2,290 mm, Hydraulics, automatic reverse drive, hot-dip galvanizing, * IMMEDIATELY AVAILABLE * Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY! - Number of animals: 2 - Gross vehicle weight: 1,630 kg - Unladen weight: 970 kg - Payload: 1,630 kg - Interior dimensions: 378 x 181 x 230 cm (L x W x H) - Overall exterior dimensions: 503 x 229 x 268 cm (L x W x H) - Brake: yes - Support wheel: yes - Automatic with comfort handle - 100 km/h: Included! - incl. vehicle documents Vehicle superstructure: - Floor: ALUMINIUM floor - Side walls/body: Anodized double-walled aluminium - Roof material: full polyester - Colour: black - Tack room: yes, large saddle compartment - Tack room equipment: luggage net, saddle holder, make-up mirror, bridle holder, lockable door, door holder - Feed troughs: no, optional - Chassis: Pullmann 2 independent suspension with coil spring and shock absorber - Height of stall bars: 106 to 127cm, adjustable - Distance between stall bars: 173 to 205 cm, adjustable - Tailgate material: approx. 1000kg load capacity, rubber with tread strips and anti-slip - Tailgate function: Hinged door and tailgate combination - Drain flap: no - Overrun device & brake: KNOTT - Lighting plug: 13-pin - Approval: COC papers, approval with green license plate possible for sports purposes Standard equipment: - Pullman2 chassis independent wheel suspension with coil spring - incl. wheel shock absorber Wheel shock absorber (100 km/h) - Aluminum floor - Aluminum walls - Tying possibility outside - Tying possibility inside - Stainless steel tie rod mounted on the right + suitable for feed troughs - Floor-to-ceiling ALU entrance door on the right + sliding window + aluminum handle, lockable - Tack room inside XXL with swiveling saddle holder - PVC transparent partition wall - Single wheel mudguards, plastic (black) - many sliding windows - rubber glued to floor and sealed - hay net hooks - step protection on side walls (GRP plastic) - maneuvering handle - tarpaulin roller blind as net - lifting device gas pressure shock absorber on tailgate - step on rear flap - 3rd brake light on rear flap - light Light system with reversing light - 13-pin plug Accessories can be retrofitted - please enquire: - Cover for automatic jockey wheel - Anti-sway hitch - Weight reduction to different total weight - Aluminum rims - Approach mirror - Climbing aid - Storage bracket for saddle (KTL-coated) - Feed trough for hanging with holder - Video surveillance system incl. reversing camera - Anti-theft device New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Codpfx Ansu Hrthjwjgt

Condition: new, maximum load weight: 36,400 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You will find our complete vehicle inventory, including immediately and soon-to-be available vehicles, on our website. Excerpt from the equipment. Full equipment details available upon request. - Gooseneck in SNT design to optimize load platform length, approx. 3,700 mm long, with a rear taper approx. 1,000 mm x 6° - For tractors: 4 x 2 and 6 x 2 - ASPÖCK-UNIBOX at the front connection panel with 24N, 24S & 15-pin sockets - 3 kW electro-hydraulic power pack for hydraulic operations (excluding hydraulic winches). Without supply line installation on the tractor unit - Outer beams of the gooseneck with mounting holes for boltable lashing rings. First hole approx. 200 mm from the front, subsequent holes approx. every 400 mm. 2 pairs of screw-in lashing rings included (LC 5,000 daN) - One mounting hole at the rear upper part of the gooseneck’s outer beams for a boltable lashing ring - 1 pair of screw-in lashing rings included (LC 10,000 daN) - 3 pairs of recessed lashing rings inside the gooseneck’s outer beams (LC 5,000 daN) - 3 pairs of recessed lashing rings in the center of the gooseneck (LC 5,000 daN) - 1 pair of recessed lashing rings at the rear center of the gooseneck (LC 5,000 daN) - Grating covering on the gooseneck and rear taper with 5 mm steel reinforcement - 2" kingpin - Round NATO socket at the front connection panel (Maeler & Kaege VG 96 917) - Spiral cable for powering the electro-hydraulic unit and/or electric winch (approx. 35 mm², approx. 3.5 m long) between trailer and tractor unit, with plug (NATO-NATO) - 1 pair of detachable aluminum side boards on the gooseneck, approx. 400 mm high, anodized finish CARGO AREA: - Cargo area, approx. 9,600 mm long, with rear taper approx. 900 mm x 6° - Cargo area behind the gooseneck hydraulically liftable and lowerable, approx. 3,000 mm long, load capacity up to approx. 9,000 kg - TPMS (Tire Pressure Monitoring System) according to ECE R 141 - BPW axles and suspension, 1st and 2nd axles fixed, 3rd axle with trailing steering. 3rd axle with electromagnetic reverse lock via reverse gear and manual activation - Technical axle load: 12,000 kg each - Air suspension with lift and lower valve - 235/75 R 17.5 3PMSF twin tires. Brand of our choice, load index 143/141J (144/144F) - Mechanical landing legs with 2-speed gearbox and crank - Continuous grating flooring with approx. 5 mm steel plating for additional reinforcement, designed for point loads: on the lift bed and cargo area - Painted sand coating on the gooseneck cover plates as well as transition areas between neck and lift bed, lift bed and cargo area, and cargo area and ramps - 1 spare wheel mounting bracket under the cargo area to the right in front of the axles - Cut-outs in the outer frame of the cargo area and lift bed for attaching tie-down straps (LC 2,000 daN) - 11 pairs of recessed, fold-out lashing rings in the outer frame of the cargo area (LC 10,000 daN): 3 pairs in the lift bed outer frame, 8 pairs in the cargo area outer frame Cgjdpfx Aeyhkqujnwet - 11 pairs of recessed lashing rings along the central beam (LC 5,000 daN): 3 pairs in the lift bed, 8 pairs in the rear cargo area - Control valves for the hydraulic ramps located on the right side of the vehicle - 1 pair of foldable mechanical rear supports, single-hand operation HYDRAULIC LOADING RAMPS: - 1 pair of two-part AXS steel ramps, approx. 4,920 mm long, and a

Condition: new, empty load weight: 970 kg, maximum load weight: 1,630 kg, overall weight: 2,600 kg, loading space length: 3,780 mm, loading space width: 1,810 mm, loading space height: 2,300 mm, tire size: 185/65R14, 2 horse trailer from ChevalLiberte model MULTIMAX. Large tack room with exterior and interior door, aluminum walls and aluminum floor combined in a rot-proof aluminum horse trailer. Aluminum horse transporter for up to two horses with excellent driving characteristics thanks to the Pullman2 chassis! The comfort chassis of the aluminum horse trailer is an in-house development by Cheval Liberte. With an access height of 45 cm, independent suspension, trailing arms, coil springs and shock absorbers, the ride comfort is second to none. Safe loading of horses through a flat ramp flap, which can also be set up as a door, reduces the risk of injury when loading and unloading. Cedsrxu S Ropfx Anwegt In addition, pallets can be loaded easily and the trailer is easier to clean thanks to the flap/door system. The two-horse trailer is equipped with a folding partition wall, tack room, poly hood available in various colors, aluminum walls, aluminum floor, access door, flap and door system, Pullman chassis-2, 100km/h, interior light, automatic support wheel, sliding window, spare wheel, stable frame and V-drawbar. Horse trailer accessories such as external tethering bracket, feed bucket, drawbar cover, anti-theft device and scratch mats are also available. The body is splash-proof.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3550x1450x1800 mm Weight 3500 kg Total power requirement 94,75 kw Cgjdpjvz Hxqefx Anwet

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2500x2170x2080 mm Weight 4250 kg Total power requirement 81 kw Cedpfx Ansvz Hwtjwegt

Condition: used, overall weight: 45,000 kg, axle configuration: 3 axles, first registration: 09/2017, * SAF axles * Wheel recesses * Hydraulic loading ramps, width adjustable * Air suspension * Extendable * Unladen weight: 11,020 kg -----Internal vehicle number: 11010----Subject to errors and prior sale. WhatsApp support available! If you have questions about the vehicle or need further information, feel free to contact us conveniently via WhatsApp. Cgsdpfowta Alox Anwot WhatsApp: German, English -- WhatsApp: German, English, Arabic

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 4460x1780x1880 mm Weight 3500 kg Total power requirement 57,2 kw Cedpfsvz Hwgsx Anwjgt

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2100x1900x1980 mm Cgjdpfovz Hxdox Anwjt Weight 3500 kg Total power requirement 39,2 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2200x1500x1580 mm Cgedpfx Anovz Hwyjwot Weight 2300 kg Total power requirement 40 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1930x1580x1580 mm Weight 2250 kg Total power requirement 32,57 kw Cjdpfx Ajvz Hw Tonwjgt

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2950x1620x1770 mm Weight 3300 kg Total power requirement 71,5 kw Cgsdpfsvz Hxkex Anwot

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2100x1900x1980 mm Weight 3500 kg Total power requirement 77,2 kw Cgedpfevz Hwmjx Anwot