Machining center

Hundegger SPM-2

Condition: good (used), Year of construction: 2012, Parts shown by hand not come. Hodpfxjx Awzbo Akbel X1020mm Y610mm Z610mm 12.000 rpm,25 KW, 160Nm Control unit: HEIDENHAIN iTNC 530, 4th axis will come without parts shown by hand.

Condition: good (used), Manufacturer: MBT Hsdpfshzr U Ijx Akbol Tip: MV-250 S Motor: 5,5 kW hopper size: 780 x 600 mm Housing size: 3500 x 1000 x 2200 mm

Condition: new, Year of construction: 2026, Size: 6 Hedpedlhdbefx Akbel Nominal heat output: 170kW -- BImSchV stage 2 and CE conform-- combustion chamber completely fireclayed For rooms of: 4.800 m³ (according to DIN) Fuel: logs, chipboard, chips, chip briquettes fuel consumption: 40 - 50 kg/h Blower air capacity, free blowing: 14.000 m³/hour Outlet opening: Ø 700mm Flue pipe connection Ø 220 mm Weight: 2.150 kg SPS control cabinet: 380 Volt

Year of construction: 2024, condition: new, noris- Extruder MINI ESE 20/25 D Technical data Screw diameter [mm] 20 Hodpfx Ajhx Elfjkbjl Screw length [L/D] 25 Screw speed [min-1] 20-200 min -1 Screw axial pressure [bar] 300 Continuous load 350 maximum Drive Three-phase drive with frequency converter Drive power [kW] max. 2.5 Reduction gear with integrated axial bearing Weight [kg] approx. 160 Dimensions [Lx Wx H] [mm] approx. 1050 x 600x 1590 *) Electrical connection values 3 / N / PE Supply voltage [V] 400 at 50 Hz Control voltage [V] 230 Temperature control electrical resistance heating bands in mica design. Max. processing temperature [°C] 300 Switch cabinet and control panel The electrical installation of the extruder is located in the machine base. The base contains all the necessary switching, control and display devices. The feed zone is water-cooled, the water connection is provided by the customer, a cooling unit for cooling the water is not included in the offer. Extruder tools are not part of the offer

Condition: used, No. 3213 Thermal treatment system / vacuum dryer WTT Hodjv Si Szspfx Akbol Used, year of construction 2017 Thermal treatment system / thermal chamber for the modification of wood The WTT thermal chamber is a system for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on the thickness and type of wood. The system has a powerful energy and heat transfer system and works with a gas or oil-fired boiler system that uses thermal oil as a heat transfer medium. Technical data: Capacity: 5950 - 9900 m³ of wood per year (for 330 working days) Usable volume: 9 m³ (with 50 mm wood thickness) Stack dimensions: 10500 x 1300 x 1100 mm LWH Minimum board thickness: 10 mm Power connection: 3 x 400 V, 50 Hz + zero + earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heat output: 2 MW (230 °C - 250 °C thermal oil) Heat consumption: 120 kWh/m³ wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm stainless steel duplex EN 4462 Door opens hydraulically, with 1.5 kW drive Working pressure: 0.1 to 15 bar (absolute) Working temperature: 0 °C to 220 °C 200 mm glass wool insulation, clad with 1 mm galvanized sheet steel Main components: 1. autoclave, in which the heat treatment takes place 2. vacuum system that sucks the air out of the autoclave before heat is applied 3. energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. nitrogen generator 6. gas cooler system Heating and cooling system: Heat exchanger: 8 units (4 on each side) Material: Stainless steel pipes (seawater resistant) Total floor area: 165 m² Cooling water consumption: 1000 l/batch (not contaminated, only heated) Control and operation: Control system: WTT ExoT (fully automatic) 22” color monitor, IBM computer, printer Sensors: 4 PT100 temperature sensors 2 mechanical thermometers 1 vacuum/pressure transmitter 1 mechanical vacuum/pressure gauge Special equipment: Hydraulic rail bridge for convenient transportation of wooden trolleys Automatic trolley extraction with cable winch (1.5 kW) 2 MW thermal oil boiler (heating) Fuel oil tank (4000 l) with measuring system Insulated 20 foot steel container for heating module Stainless steel safety chimney (300 mm diameter, 6000 mm length) Functional description: 1. filling the autoclave with wood 2. creating a pre-vacuum 3. filling with gas 4. heating 5. modifying 6. cooling 7. pressure equalization 8. creating a post-vacuum / drying 9. pressure equalization 10. emptying Certified EC Pressure Equipment Directive (PED) 97/23/EF Construction EN 13445 Sale on behalf of customer, from location near 5020 Salzburg (Austria), without dismantling, transportation and assembly Dismantling, loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: ready for operation (used), Year of construction: 1998, power: 37 kW (50.31 HP), pressing force: 250 t, stroke length: 150 mm, table width: 900 mm, table length: 1,000 mm, overall weight: 16,000 kg, Very nice and well maintained hydraulic press. Hedpsry Trpofx Akbjl 250 tons pressing force. Approximate dimensions: H: 380 cm. W: 200 cm. L: 200 cm. Weight: 16,000 kg. Can be loaded by crane on collection against payment. Transportation can be arranged. Sold for customers. Location: DK-7600 Struer. Make an appointment for a demonstration.

Condition: excellent (used), TECNI-ARMENTIA CH-70 edger - hydraulic control - the possibility of programming the width - saving up to 12 programs - centering table TECHNICAL PARAMETERS: cutting width max. 700 mm cutting height max. 130 mm main engine power 55 kW material width max. 830 mm length of the fixed sleeve 300 mm length of the movable sleeve 100 mm min. material length 700 mm spindle diameter 65 mm Hjdpfx Akeidmptobjl sleeve diameter 85 mm disc diameter 350 - 400 mm hydraulically smoothly adjustable feed feed speed up to 38 m / min feeding table 2700 mm roll width 700 mm roll diameter 140 mm centering feeding table two lasers pump motor power 4 kW row of anti-recoil pawls three upper pulling rollers three lower pull rollers hydraulic pressure hydraulic height adjustment dimensions (length / width / height) 480/200/230 cm weight 4000 kg

Year of construction: 2026, condition: new, SoloBaker's superb NEW BCS 201 vertical cake and pie slicer. Universal automatic knife slicer with a rotary table designed for slicing all kinds of cakes and pies. The solid construction, precise drive system, automatic cleaning, blades heating and adjustable cutting head speed give almost unlimited possibilities to adapt the device to the selected product. In combination with the affordable price and small dimensions, the slicer is a good and economical solution for small and large patisserie enterprises. Dimensions 130 x 110 x H 148cm. Power consumption 1,2 kw. Voltage: Single phase 230V 50Hz with voltage stabilizer. Required air connection 0.6-0.8 MPa and a flow rate of 200-300 l/min (depending on the cutting speed). Vertical automatic cake and pie slicer (cutting machine) with a rotary table designed for fast slicing of all types of cakes and pies without compromising their attractive appearance and structure into square and triangular portions. With the help of a PLC, the touchscreen allows easy setting of the parameters of the cut part (s) and the built-in microprocessor allows to store up to 20 cutting programs in memory. The cover of the machine is made of stainless steel. The 9L air tank is built into the machine at the front part. The double blades of the knives are made of food grade stainless steel and have a precise drive system and an automatic system for cleaning and heating the blades and an adjustable cutting speed allow the machine to cut various cakes and pies to an effective height 80 mm. Hedpshabdpefx Akbsl Most important functions: - The double blade knife, vibrating in the opposite direction, makes cutting cakes smooth and clean. - Anti-slip rotary table (40x60cm) with a rectangular tray can be easily replaced by 2 round trays (diameter each 30 cm). - Slicing 2 round cakes at the same time. - Locking wheels make it easier to transport the machine to the desired location. - Induction system for heating the knife up to a temperature of 100°C ensures an even cut of hard glaze, chocolate and other similar surfaces. - High degree of accuracy of cutting parameters is achieved by means of two servomotors, which ensure precise operation of knives and table rotation. - Cake pieces are obtained with the same weight, shape and volume, which eliminates the need for additional control. - The speed of lowering and lifting the knife is set according to the characteristics of a particular product - this will allow you to achieve maximum productivity. - Electronic air pressure control ensures smooth and accurate machine operation. - High quality automatic knife cleaning system maintains the perfect appearance of the cut product and eliminates the need to wipe it by hand before each cutting. The cleaning system includes mechanical removal of product residues by a return slider (bar) and a stream of air into a special collection tank. - Residue collection containers eliminate the need for frequent cleaning of the machine and the surrounding work area.. - The machine makes up to 40 cuts per minute. - PLC & touchscreen Siemens. - Built-in voltage stabilizer for stable operation of the electronics and servomotors. CUTTING RANGE: Round cake/pie with a diameter of 15-30 cm - cut into triangles into 2/4/6/8/10/12/14 equal parts. Rectangular cake/pie up to 60 cm x 40 cm - cut into rectangular or triangular shapes. 1 Year Warranty

Condition: new, Year of construction: 2021, functionality: fully functional, !Machine like new, only 600 hours! HEIDENHAIN 640 Table 1300X700 X, Y, Z: X=1220 Y=710 Z=630 Spindle revolutions 60-10000 24 positions tool changer. Hsdpewx Nkcjfx Akbol Machine dimesnions 3200 X 3900 X 2490 Machine weight 9500 KG

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, The all-rounder combines outstanding build quality with a wide range of applications. Our machine also offers intuitive operation to optimize your packaging processes. A high-quality material unwinder with dual automatic roll centering ensures precise material guidance. Furthermore, our active material advance unit guarantees optimal web tension for flawless packaging results. The highly powerful brushless motors and user-friendly color touchscreen control system give you maximum flexibility during format changes and greatly simplify your packaging operations. The machine features memory slots for storing machine parameters—up to 50 different products can be saved. For this packaging line, we also offer fully and semi-automatic infeed systems, which can be retrofitted at your request. The machine is available in both directions of operation and features rotary cross-sealing with an electronic overload protection switch for maximum safety. Thanks to its powerful performance, versatility, and technological sophistication, our machine is ideally suited for packaging food items such as brioches, cakes, candies, pralines, chocolate, as well as pharmaceutical products and various gift articles. If you wish to optimize your packaging processes with strong production performance and high quality, Impuls Packaging is your ideal partner. System features: 1. Chain conveyor belt, 2.6 meters in length (other lengths available on request) 2. Adjustable bag former 3. Single film loader + automatic film centering device 4. Rotary end seal, single sealing jaw 5. Robust, central fin seal structure 6. Four servo-driven systems: - Active material advance shaft - Center sealing - End sealing - Conveyor belt 7. HMI control panel 8. Three individual temperature controllers 9. 304 stainless steel housing 10. Documentation in the local language 11. Register mark control 12. Bag length programmable or with fully automatic product length detection Hsdswld Tfepfx Akbsl 13. Standard operation from left to right Technical specifications: 1. Product length: L40–600 mm 2. Product width: W30-200 mm 3. Product height: H10–80 mm 4. Packaging speed: up to 80 products/min 5. Maximum film width: 600 mm 6. Power supply: 1Ph. 220V 50Hz 7. Total power: approx. 4.7 kW 8. Machine weight: approx. 550 kg 9. Machine dimensions: approx. 4300 x 1190 x 1210 mm