Four-sided planer

SCM Compact 23ks

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, working width: 230 mm, spindle diameter: 40 mm, spindle speed (max.): 6,000 rpm, working height: 120 mm, TECHNICAL DETAILS Working height: 120 mm Working width: 230 mm Feed rate: 6 / 12 m/min Spindle speed: 6,000 RPM Spindle diameter: 40 mm Tool diameter, vertical spindle: 100–180 mm Infeed table length: 2,000 mm Motor power 1st spindle, bottom: 5.5 kW Motor power 2nd spindle, left: 11 kW Motor power 3rd spindle, right: 11 kW Motor power 4th spindle, top: 7.5 kW MACHINE DETAILS Dsdpjzrmpmjfx Ak Ascp Dimensions & Weight Dimensions (L x W x H): 3,250 x 1,550 x 1,500 mm Weight: 1,800 kg EQUIPMENT Documentation

Condition: used, SCM 320cm SiX panel saw 320cm carriage, aggregate tilting in two directions +45 to -45 degrees, blade tilt and up/down adjustment with electric motor, rip fence on the right side with electric adjustment up to 1500mm, Dcodpozd Uf Tofx Ak Aep 2-axis scoring saw with electric adjustment, 7.5KW motor, speeds controlled by a frequency inverter, max. blade diameter 550mm, carriage with angle adjustment used machine, good condition The machine has a new, non-original control system. All adjustments are functional.

Condition: excellent (used), Year of construction: 2014, TECHNICAL DATA: Working width 230 mm, working height 120 mm, five heads, spiral-knife cutterheads, head arrangement: bottom/right/left/top/bottom, infeed table length 2500 mm, electric height adjustment, stepless feed speed control, pneumatic material pressure, motor with integrated brake, cutterhead speed 6000 rpm, total weight 2000 kg, motor power ratings: 5.5 kW/7.5 kW/7.5 kW/4 kW, year of manufacture unknown. Dodpfey D Sfyex Ak Aocp

Condition: new, Year of construction: 2024, TECHNICAL DATA Table size 1100 x 760 mm Table height 870 mm Milling spindle non-replaceable 30 mm Clamping height 140 mm Height adjustment 125 mm Dust extraction port 2 x Ø 120 mm Speed 3000 / 4500 / 6000 / 9000 rpm Color RAL 7035 Light Gray and RAL 5000 Violet Blue Net weight approx. 800 kg TECHNICAL DESCRIPTION Robust German engineering Dcjdpfx Ajfpb Nmjk Aop Table milling machine with a permanently installed, single-sided swiveling milling spindle for a swiveling range of -5° to +45.5° Positioning control for height and swivel adjustment with zeroing of the height and offset dimension Electronic position and speed indicators 4 speeds 3000 / 4500 / 6000 / 9000 rpm Belt quick-clamping device Push buttons for spindle start and stop Left and right rotation Milling cutter quick-clamping device Finely planed gray cast iron table with rigid frame support Control panel located below on rigid frame support Milling fence 216, total adjustment via handwheel and LCD display, including cast iron fence plates and aluminum splinter guards Machine socket Lockable main switch Mechanical motor brake Milling guard and pressure device GAMMA V 1629 Arc milling fence 1639 Tapoa Milling spindle 30 mm, non-replaceable CE compliant GS tested

Condition: excellent (used), Year of construction: 2010, machine/vehicle number: 10-12-10-064, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, cutting width (max.): 1,000 mm, saw blade diameter: 500 mm, Equipment: saw blade guard, scorer, ALTENDORF F45 – Panel saw, manufactured in 2010 Equipment according to the Altendorf factory archive, confirmed on July 31, 2026: - Manufacturer / Model: ALTENDORF F45 - Year of manufacture / Machine number: 2010 / 10-12-10-064 - Double sliding table: Table length 3,000 mm - Cutting width: 1,000 mm - Main motor: 5.5 kW (7.5 hp) - Saw blade diameter: max. 500 mm - Control: C-terminal on the machine stand - Scoring unit: 2-axis, with RAPIDO scoring system - Clamping system: Standard (toothed nut) - Table extension: 840 mm - Stops: Angle/miter stop; DUPLEX up to 1,350 mm - Electrical connection: 400 V / 50 Hz Dedpfxeztwvao Ak Ascp Complete video with original audio available in the advertisement. Price upon request. Offer includes free loading onto a truck. Inspection, loading, and transport by arrangement. Scope of delivery according to individual offer. Taken over from a carpentry workshop in Reutlingen. Machine location: TEC-WOOD warehouse in Poland, approximately one hour from Frankfurt (Oder). Consultation and sales handled by DS-Maschinen in Stuttgart.

Condition: excellent (used), Year of construction: 2009, machine/vehicle number: 241.125, functionality: fully functional, Horizontal Beamsaw of the manufacturer Schelling, designed for cutting wood-based material HPO – cutting optimization program Saw blade projection: max. 95 mm Saw carriage feed up to 120 m/min Cutting lengths: Model FH 4 430 - 4.300 mm Dodpfxex Ebzde Ak Ajcp Can be inspected in working condition until beginning 2026. (dismantling planned) Maximum Saw blade Diameter - 350 mm Projection - 95 mm Clamp opening 90 mm Power Saw motor - 15 kW Scorer Diameter 300 mm Feed rate forward up to 80 m/min reverse 80 m/min Saw feed rate forward up to 120 m/min reverse 120 m/min

Condition: as good as new (ex-display), Year of construction: 2026, CNC Machining Centers Rover Multi Up M C S Working Area*: X = 3280 mm; Y = from 1580 to 1660 mm, depending on work conditions Z = 200 mm – 5-axis machining unit and drilling unit, with vacuum modules H = 74 mm Z = 245 mm – 5-axis machining unit and drilling unit, with vacuum modules H = 29 mm Workpiece Clearance*: Y = 1900 mm Axis Travel*: X = 3706 mm; Y = 2294 mm; Z1 = 515 mm; Z2 = 371 mm VACUUM SYSTEM Subdivision of the vacuum system into 2 working zones and 2 clamping zones in X. AUXILIARY VACUUM SYSTEM – 2 zones Allows clamping of workpieces using vacuum templates. Remote Control RM850 Rover Multi Up M C S Panel – Multi Purpose Regular Configuration 2 Compatible with the turret tool magazine with 16 positions and the side tool magazine with 12 positions. The tool magazines can also be retrofitted. Uninterruptible Power Supply (UPS) for machine PC. 6 ATS workpiece supports – 18 module carriers — 6 aluminium workpiece supports. The positioning of the workpiece supports is via linear guides with ball bearing slider blocks. Clamping is performed on the front and rear linear guides via pneumatic cylinders. Clamping is released by a push button located at the front of the workpiece support. — 18 module carriers, 132 x 132 x H 41.5 mm, with independent pneumatic clamping. The vacuum modules can be rotated in 15° increments on the module carriers; an ideal solution for shaped parts. — 18 covers for module carriers without template. SA (Set-Up Assistant) working table for tables up to 1550 mm. Supported manual positioning system with motion direction indicator and position indicator. — Sensors on each working table and along the X-axis of the working area. — Display of direction and position achieved for the carriage during positioning phase, mounted on each working table. According to the programmed configuration of the working tables, the system indicates the direction of movement for each working table and carriage, and confirms with a green LED and audible signal when the correct position is reached, with a tolerance of +/- 1.5 mm. Subdivision of the pneumatic system into 2 working areas in X. Dcodpfx Aey Ehrxjk Aop Machining unit with 5 interpolating axes, 13 kWp (17.4 HP), with HSK F63 adapter, liquid-cooled – 20,000 rpm Extraction hood with 12 NC-controlled positions for the 5-axis electrospindle. Flange for preparation of a 5-axis interpolating machining unit for mounting aggregates. Coolant system Additional Z-axis carrier for rear machining units, with independent Z-axis. Drilling head BH 24 L Side tool magazine with 12 positions, integrated into the machine bed. Turret tool magazine with 16 positions, installed directly on the X machining unit. HSK F63 tool adapter, equipped with a long integrated flange, for saw blades on the 5-axis head. Saw blade 300 mm, for tool holder. Hi-Tech tool set Complete set of tools for the acceptance test Consisting of the following 9 parts Replacement of standard PC with a high-performance PC. Digital device for measuring tool length up to 130 mm diameter. bSolid NC-HOPS 8 MacroCAM Rover 1. AV NC-HOPS MacroCAM 1. License WorkCenter suction cup proposal 5-Axis Simultaneous Material removal simulation 12-month warranty period Location: ex stock 54634 Bitburg - immediately available -

Condition: excellent (used), SCM T130E Spindle Moulder with Glazing Bead Unit Spindle diameter: 35 mm Total spindle length: 140 mm Variable spindle speed via frequency inverter: up to 10,000 rpm Main motor power: 5.5 kW Unit for cutting glazing bead Unit power: 2.2 kW Electronic spindle height adjustment Electronic fence adjustment 4-roller feed Masterwood Feed speed adjustment via variator CE certified Dodpfxsxbnyrj Ak Ajcp DTR technical documentation Year of manufacture: 2005

Condition: excellent (used), TECNI-ARMENTIA CH-70 edger - hydraulic control - the possibility of programming the width - saving up to 12 programs - centering table TECHNICAL PARAMETERS: cutting width max. 700 mm cutting height max. 130 mm main engine power 55 kW material width max. 830 mm length of the fixed sleeve 300 mm length of the movable sleeve 100 mm min. material length 700 mm spindle diameter 65 mm sleeve diameter 85 mm disc diameter 350 - 400 mm hydraulically smoothly adjustable feed feed speed up to 38 m / min feeding table 2700 mm roll width 700 mm roll diameter 140 mm centering feeding table two lasers pump motor power 4 kW row of anti-recoil pawls three upper pulling rollers three lower pull rollers Dcjdsidmptjpfx Ak Aep hydraulic pressure hydraulic height adjustment dimensions (length / width / height) 480/200/230 cm weight 4000 kg

Condition: used, Year of construction: 2022, functionality: fully functional, Equipment: CE marking, Machine is USED, excellent condition, first owner. Machine can be packed and ready for transport from Sellers warehouse in Croatia witihn 5 days after order confirmation ! OLIMPIC k 560 composition "T-ER2" (40) - European safety regulations (CE norms) - ”StarTouch" electronic control with 12" display touchscreen n° 100 working programs which can be customized - Electronic positioning of top presser - Panel spacer on infeed fence - "Nesting" copying device kit - "AAR" anti-adhesive unit - Spray-mist device for edge finishing - Spray-mist device for delicate edges - RC-N glue scraping unit - "SP-V" brushing unit 1 - "EASY SIZE" device - Infrared ceramic lamp - Gluing unit with pre-melting device - "SGP" glue pot with automatic dosing by NC in substitution of the standard one - Diamond tools for pre-milling unit h=64-no.2 knives TECHNICAL DATA Variable track feed speed m/min 12 -18 Panel thickness mm 8-60 Thickness of edges in strips mm 0,4-6 Thickness of rolled edges mm 0,4-3 Max. section of rolled edges mm² 135 Distance between two successive panels mm 600 Minimum panel length (100 mm min. width) mm 140 Dedpfxezv Tibj Ak Aocp Min. length of edge in rolls mm 180 Min. length of edge in strips mm 220 Min. panel width (210 mm min. length) mm 95 Opening for panel support roller mm 500 Worktable height mm 900 MACHINE DIMENSIONS (transport): lenght: 5.005 mm wide: 1.000 mm height: 1.950 mm