Finishing machines for sale

Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
13
Sorbini & Cefla & Costa Finishing Line Mekanika Infeed System with Board Selection Bes908ibwu Edge Spray Booth Cross Transfer Panel Press Costa Sander 3 Roll, Platen, Brush 3 Roll Coater Sorbini 3 Brush Stain Machines Double UV Light One Reverse Roll Coater One UV Light One Roll Coater One UV Light One Roller Coater One Double UV Light Costa Sander Sealer Sander One Roller Coater One UV Light One Roller Coater One UV Light One Roller Coater One Roller C... more
15
Catalog number 3623 - diameter of the obtained rollers 120-240mm - max. diameter of wood before 320mm machining - max. machining allowance 40mm per side - minimum length of machined 800mm shafts - smooth regulation of feed speed - 3kW feed motor power - power of 11kW milling cutter motors - power of the 30kW knife head drive motor - head speed 1000 rpm *in advance: - 4 pulling shafts - head with knives - smooth pulling roller - milling head - 3 smooth pulling shafts *from down:... more
6
Silo for sawdust brand TERMOVENTILAZIONE 21 m3 Model ESTIV 28, MS28/24M1B2C Year of manufacture 1999, CE standard Main fan motor Power 11 kw Bag filter with automatic bag otter Diameter of silo 300 cm 4 rings, height of one Ring 150 cm Total height of silo 700 cm Sawdust Selector Target Valve 4 KW Transport Fan Be0vln3zwo Fan Inlet diameter 400 mm Control cabinet Complete silo No complicated assembly more
9
Weinig 120/4 planer for sale. In working condition. The max width is 120mm, the max height is 100mm. Six shafts: bottom, right, top, bottom, right, left. The one motors are missing Nn8lbdqv more
2
one side calibrating milling machinesMachines with a top rotor and feeding belt below are used for calibration of very thin workpieces, such as hardwood top layers for production of engineered flooring. Description Heavy one-sided ROTOLES milling calibration system designed for calibration and solid laminated wood. Through specialized processing (the tool rotates horizontally on the right performs the processing speed based on the principles of the router), it is possible to calibrate very shor... more
6

Super Finisher HEMAG Finamat

Rottenburg, GermanyGermany dealership location
6641 km
good (used)
Band width is 150 mm, the machine in the State and sold included in the photos. I don't know my way with such machines and don't know whether this is the right section. I can also a video of the machine email (see current). The band units can also out be built and units are used as feed Tyldyqknz more
3
Marunaka RoyalFX un UP are linked with each other, so that laboratories in one pass from top and bottom can be edited at the same time. That run through speed is located at 50 m / min. Machine is in TV good condition and has been fully verified. This is 2 knife sets supplied. Technical data of Royal FX from the bottom with machined: Working height 250 mm Clearance height 180 mm -net weight 360 kg Technical data royal up top machined with: Klwgyqc9 Working width 250 mm Clearance... more
15
CATALOG NUMBER 5398 TECHNICAL DATA - max. width of the workpiece 20-200mm - max. workpiece height 8-130mm 5 spindles: 1) horizontal lower 200mm 5.5kW 2) vertical right 130mm 4kW 3) vertical left 130mm 4kW 4) horizontal upper 200mm 5,5kW 5) horizontal lower 200mm 5,5kW - all spindles adjustable up / down, right / left - diameter of 40mm spindles   - above, 6 metal, toothed pulling rollers, including 2 double ones - 2 pulling pins, smooth, rubber, double - from the bottom, introdu... more
8
Weinig Unimat 23 E Planing Machine Planing width min./max. 20/240 mm Planing height min./max 8/170 mm Number of spindles 6 Year of Build 2001 2000 mm length Input table Spindle diameter 40 mm Spindle Speed 8000 RPM Pneumatic rollers with clamping force adjustment for 3 sections 6 x pulling Roller from above 3 x pulling roller in the table Wakselite Pump Fully adjustable spindle Layout and power of spindles: 1. Lower, power 7.5 kw 2./3. Milling machines, vertical, power 15 kw ... more
6
Year of production: 2008 Manufacturer: SCM Compact Model: NTE working width: 230mm Bdx3wjrmu9 working height: 120mm 4 heads: TERSA system head system: bottom / right / left / top spindle diameter: 40mm spindle revolutions: 6,000 rpm Smooth feed speed regulation electric adjustment of the upper head electric adjustment of the left head adjustment of heads in two axes table lubrication system maximum diameter of tools: 180mm more


Finishing ...
daily

New machines via email!

Stay updated!
3
Technical details The working width of 18 mm 230 this Working height 6-160 mm Minimal length of the workpiece240mm Feed rate 7-36 m/min Spindels: 1. The lower horizontal 10 hp 2. The right vertical 10hp 3. The left vertical 10hp 4. The right vertical 10hp 5. The upper horizontal 10 hp 6. The upper horizontal 10 hp 7. The lower horizontal 10 hp The engine for the move the 10 hp The engine move the bridge 2 hp with inclination. Spindle diameter 40 mm The rotational speed o... more
3

Finiermaschine Marunaka Royal UP

Gersfeld, GermanyGermany dealership location
6612 km
used
Working width: 0 °-40 °: 250 mm Table setting (at 60 °): 165 mm Table adjustment 0 °-60 °: depending on the type of wood Table setting (250°): 300 mm Table setting (in 25° opposite): (2 x 300 mm) 600 mm Clearance height: 1-230 mm Feed speed: 50 m / min. Weight: 300 kg Machine dimensions (L x W x H): 1060 x 700 x 1450 mm Gfznm2aia more
3
Marunaka Royal FX Finiermaschinen Wqdwk3wr0 Dimensions (Lxwxh) approx.: 1150 x 800 x 1500 mm Approximate weight: 350 kg Blade length approx. 340 mm, length 950 mm, width 270 mm. Max height 180 mm, height adjustment via hand wheel,. Feed: band width 220 mm,. Engine capacity 2.2 kW, Cutting angle adjustment 0° - 60° on both sides. more
15
CATALOG NUMBER 5394 TECHNICAL DATA - max. width of the workpiece 230mm - max. workpiece height 130mm Bewblh8zv0 5 spindles 1) horizontal lower 230mm 7.5kW 2) vertical right 130mm 3) vertical left 130mm; (2 and 3 spindle) 15kW 4) horizontal upper 230mm 11kW 4 spindle electrically adjustable up / down 0,37kW 5) horizontal lower 230mm 7.5kW - all spindles adjustable up / down, right / left - all spindles equipped with an electric brake - diameter of 40mm spindles   - in advance 4 ... more
7
Four-sided planing Weinig Quattromat 23 Number of spindles 4 Max/min. working width 230/20 mm Max/min. working Height 130/15 mm Year of Build 2000 Pneumatic clamps Spindle diameter 40 mm Roll in the countertop at the end of the machine Bevxj9li3e Extraction Nipple 4 x 120 mm Total Power 26 kw Power of individual engines 1. Horizontal lower spindle, power 5.5 kw 2. Vertical spindles L and P, power 7.5 kw 3. Horizontal upper Spindle, mon 7.5 kw more
10
Pos 1. MKH - simple feeder for entire packages Pos 2. MKH - automatic feeding system for planer with accelerator, Pos 3. WEINIG planer, type Hydromat 25R from one of the best vintages of 1989 Planer specifications: The width of the material to be planed up to 250 mm The height of the planed material is 140 mm Speed ​​up to 80 m / min (main motor 22 kW) Head layout: 1 Horizontal lower head, motor power 11 kW 2 Vertical right head, 11 kW motor power 3 Vertical left head, motor power ... more
3
used cleaned, function checked, test run new knives manufactured by Marunka type Royal UP motor  kW 2,2 Max. Opening width - by cutting angle 40° 250 mm - by cutting angle 60° 165 mm max. passage height 180 mm cutting angle adjustable 0-60° feed speed 75 m/min blade width G9bcxx 335 x 66 x 8 mm adjustment manual moveable table height 610 - 710 mm adjustable table size 885 x 650 mm required space ca. l x w x h mm 970 x 850 x 1230 weight 525 kg total connected power ca. 2,2 kW located in  9744... more
2

Finiermaschine Marunaka Royal FX

Gersfeld, GermanyGermany dealership location
6612 km
used
0 °-40 ° working width: 250 mm Clearance height: 1 180 mm Table setting: (at 60 °): 165 mm Table adjustment 0-60 °, depending on the type of wood Table setting (250°): 300 mm Table setting (in 25° opposite): (2 x 300 mm) 600 mm Feed speed: 50 m / min. Weight: 300 kg Dimensions (L x W x H): 1060 x 700 x 1450 mm Yrtypp more
3
Marunaka Royal FX Finiermaschinen Dimensions (Lxwxh) approx.: 1150 x 800 x 1500 mm Approximate weight: 350 kg Blade length approx. 340 mm, length 950 mm, width 270 mm. Max height 180 mm, height adjustment via hand wheel,. Bc3j3vsgkz Feed: band width 220 mm,. Engine capacity 2.2 kW, Cutting angle adjustment 0° - 60° on both sides. more
15
Part number: 4771 TECHNICAL DATA -max workpiece width 230 mm -max height of the workpiece 150 mm -number of spindles 6 1) horizontal bottom 230 mm 7, 5kW 2) vertical right 180 mm 7, 5kW 3) vertical left 150 mm, PowerLock system 7, 5kW 4) vertical right 180 mm 5, 5kW 5) horizontal top 230 mm 11 kW Bcv3xquhwm 6) horizontal lower 230 mm 7, 5kW -all heads, adjustable up/down, left-right spindle speed 8000obr/min -5 spindles equipped with brakes (without head 3)-spindle diameter 40 m... more
5
Cutting height 60 mm 2 speeds 4 compressed air piston Bdelvlskdx Total length 3200 mm motor voltage 400 V (50 Hz) Power 4.0 HP (3.0 kW) more
5

Finiermaschine Marunaka Royal FX

Lichtenau, GermanyGermany dealership location
6788 km
used
Pickup! Blade tilt 0 °-60 ° 380 V Including knife 33bjsjvod Height 0 mm - 200 mm more
8
Max working width: 400 mm Max working height: 220 mm Min workpiece length to be processed:: 250 mm Cutterblock diameter: 120 mm Numbers of knives: 3 Manual adjustment of working height Inlet table lenght: 930 mm Outlet table lenght: 930 mm Adjustable tops Shaft diameter: 2x120 mm Power: 400 V Motor power: 3 kW Yzcjfiud Dimensions of the machine Lenght: 1920 mm Width: 900 mm Height: 1000 mm more
11
Max. working width: 230 mm Max. working height: 160 mm Spindle diameter: 40 Number of spindles: 6 Order of spindles: - horizontal lower - vertical right - vertical left - horizontal upper -horizontal lower - universal Bdcyohplh2 Every spindle on a separate engine Exhaust outlets diameter: 125 mm smooth feed speed adjustment Feed on cardan shaft Pump for table lubrication Electric adjustment of planing thickness Power Supply: 400 V Dimensions of the machine Lenght: 500... more
6
Max. working width: 230 mm Max. working height: 160 mm Spindle diameter: 50 mm Number of spindles: 5 Order of spindles: -horizontal lower -vertical right -vertical left -horizontal upper -horizontal lower Every spindle on a separate engine Exhaust outlets diameter: 140 mm Smooth feed speed adjustment Feed on cardan shaft Bdgcz8ujqy Pump for table lubrication Pressure: 6 atm. Electric adjustment of planing thickness Power supply: 400 V Total power: 55 kW Dimensions of the ... more
8
• the machine suitable for machining short pieces • standard equipped with head strugającą • Quick change knife strugającego • quick and easy adjustment of the belt tension • automatic lubrication • the feed with the transmission shift • 3 rolls in the table provide excellent performance • engine start Y-threesome • Quick change belt lower cutting head • Automatic chain lubrication feed • Optionally available is also head of the shaft spiral • table surface is chrome-plated and preci... more
8
• the machine suitable for machining short pieces • standard equipped with head strugającą • Quick change knife strugającego • quick and easy adjustment of the belt tension • automatic lubrication • the feed with the transmission shift • 3 rolls in the table provide excellent performance W3ihk • engine start Y-threesome • Quick change belt lower cutting head • Automatic chain lubrication feed • Optionally available is also head of the shaft spiral • table surface is chrome-plated an... more


Finishing ...
daily

New machines via email!

Stay updated!

to

to

Edit search

SELL IMMEDIATELY
with the world-wide market leader from 0,79 EUR per listing.
Find out more


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our app for used machines now!
Machineseeker app for iPhone and Android.