4 sided planer buy used

Recognised location: Ashburn (US) (Change)
Enter e-mail address
or
Move
4-SIDED PLANER MATCHER W/PROFILES STETSON-ROSS 612-A1 4-SIDED PLANER MATCHER W/PROFILES STETSON-ROSS 612-A1 1
Elect./Voltage: 440 V, 60 Cy, 3 Ph. STETSON-ROSS 6-12-A1 8” X 25” 12-KNIFE PLANER MATCHER WITH CARTRIDGE STYLE DOUBLE PROFILER and the following equipment: -- 8" x 25' wide max. capacity and with: -- Top Head, 80 HP (two 40 HP motors) -- Bottom Head, 40 HP -- Left Sidehead, 40 HP -- Right Sidehead, 25 HP -- Top Profile, 40 HP -- Bottom Profile, 25 HP -- Hoist Motors (1), 3/4 HP -- Motorized hoist for top infeed rolls. Bed plates, rolls, guides, and chip breakers ar... more
4-sided planer Kupfermuehle 4-sided planer Kupfermuehle 4
Planing width Max. 650 mm Planing height of 200 mm Power of the engine left 4,0 kW Power of the engine right 4.0 kW motor strength above 7.5 kW Power of the engine below 7,5 kW Cp8p2 more
Double sided planer REX HOMS-410-K Double sided planer REX HOMS-410-K 6
Working width 410 mm Working height 250 mm Number of spindles 2 Spindle configuration b-t Motor power 7,5-11 kW Working height adjustments motorized Feed speed 0-40 m/min Feed motor 3 kW Feed-system Cardan Driven bed rollers 3 Infeed rollers 3 Tools horizontal D140 x 410 x 50 Z4 Voltage 380V 50Hz 3Ph. Weight 2500 kg Cufm7 more
Hemag four-sided Planer Hemag 1 H, Coronum Hemag four-sided Planer Hemag 1 H, Coronum 3
4 planing machine with CNC control, as well as 99 PLC programs, 4 working shaft, work size 220 x 120 mm, dressing table length 2000 mm, speed 6 + 12 m / min. Electr. Thickness adjustment, Electr. Width adjustment Pneum.. Feed roller pressure lubricant pump, feed roller set off before. C9rcj more
4-sided Planer machine Weining 4-sided Planer machine Weining 6
Sell entire production line to the finger joints, part of it is our Weining planing machine, worked until the very end C8imp more
4-SIDED PLANER REX HOMS-310-K 4-SIDED PLANER REX HOMS-310-K 1
Elect./Voltage: 380/400 V, 50/60 Hz, 3 Ph. REX HOMS-310-K 4-sided planer, for laminated beams, with 5 heads. -- Top brand machine, cleaned, checked & tested by major German machinery specialists. -- Working width 310 mm (12-3/16"), working height 310 mm (12-3/16"). When planing on 4 sides the max. working height is 210 mm (8-1/4"). -- Head configuration: -- 1st Head: Bottom planer head 7,5 kW (10 HP), with counter bearing. -- 2nd Head: Top planer head 11 kW (15 HP), with counter beari... more
2-sided planer high speed KUPFERMUEHLE KH 30  V 120 m/min 2-sided planer high speed KUPFERMUEHLE KH 30  V 120 m/min 6
-Planer height 2-asided 250 mm -feed 20-120 m /min poster on the right -operator's side to the left -Hydro plane heads + jointen below + on top -spindle diameter 60 mm -chip decrease 15,+20 mm -Option 4-sided on demand Cggov more
4-sided Planer KUPFERMUEHLE VUIN-plus 4-sided Planer KUPFERMUEHLE VUIN-plus 6
4-sided Planer KUPFERMUeHLE VUIN-plus complete with soundproof cabin (available from March 2017) Planing width: 600 mm Planing width: min. 50 mm Planing height: max 200/250 mm Tool shaft diameter (thickness / Planer 160 mm) Tool spindle diameter (vertical unit 40 mm) Cut of down to 8 mm Chip removal of up to 15 mm Cut vertical unit right: 15 mm Cut vertical unit left: 20 mm Speed tool shaft: 5200u/min Drive spindle stroke: 0. 55kW Feed gear box: 5-30 m / min, 4kW lower drum: 7.5kW... more
Heavy 4-sided Planer roll forming machine MAKA/Griggio G240P, CE Heavy 4-sided Planer roll forming machine MAKA/Griggio G240P, CE 6
Technical description: -4 plane waves = U - R - L - O. * Dressing spindle with Referentzfraes, tool diameter max 150 mm, motor power 7,5 HP (braked) * Right vertical spindle, max tool diameter 200 mm, motor power 7,5 HP (braked) * Left vertical spindle, max tool diameter 200 mmMotorleistung 7.5 PS (braked) * Top spindle, max tool diameter 200 mm, motor power 10 HP (braked) -Automatically star Delta planing shaft -Planing shaft ø 40 mm, speed 6,000 rpm -Max Planer mass 240 x 160 mm ... more
4-SIDED PLANER MACHINE KUPFERMUEHLE KH-30 4-SIDED PLANER MACHINE KUPFERMUEHLE KH-30 6
STRONG 4-SIDED PLANING MACHINE, 6 SPINDLE 250 mm x 300 mm CUTTER SIZE, VERY LITTLE RUN, TOP ZUSTAND EURO 19 990 EURO + VAT C8mmv more
4-sided planer Küpfermühle 1800x300 with turntable Bodem more
4-SIDED PLANER REX HOMS-310-K 4-SIDED PLANER REX HOMS-310-K 1
Elect./Voltage: 380/400 V, 50/60 Hz, 3 Ph. REX HOMS-310-K 4-sided planer, for laminated beams, with 5 heads. -- Top brand machine, cleaned, checked & tested by major German machinery specialists. -- Working width 310 mm (12-3/16"), working height 310 mm (12-3/16"). When planing on 4 sides the max. working height is 210 mm (8-1/4"). -- Head configuration: -- 1st Head: Bottom planer head 22 kW (30 HP), with counter bearing and knife jointer, 5,400 RPM. Dust hood 200 mm (7-7/8"). -- 2nd ... more
4-sided slats planer KUPFERMUEHLE KH 30 ohne Vorschub 4-sided slats planer KUPFERMUEHLE KH 30 ohne Vorschub 6
- Planing width 310 mm - planing height 2-sided 300 mm (4-sided 140 mm) - floating vertical level - suitable for the jointing line, below 22 kW, - above 30 kW, right 11 kW, left 11 kW - warranty 12 montj Cggo0 more
4-sided Planer Kupfermuehle Vuin 605 4-sided Planer Kupfermuehle Vuin 605 6
Planing width: 605 mm Planing height: 200 mm in the horizontal level 85 mm in the vertical level Motor power: -lower knife shaft: 5,5 kW -upper knife shaft: 7,5 kW -Vertical right hand unit: 4 kW -left vertical unit: 4 kW machine dimensions approx.: 1400 mm x 3000 mm x 1500 mm C0dvm more
Combined multi-sided Universal planer KUPFERMUEHLE VUIN Combined multi-sided Universal planer KUPFERMUEHLE VUIN 6
Kupfermuehle Rebuilt 2007 Combined multi-Jointer-throated Universal planer model DOIN planing width 605mm Working height 200mm with two working shafts and upper, the total width spanning planer moulder shaft by V 271 with 8 driven transport rollers short Abrichtauflage and all clamping hoods feed into 6 levels 7-23 m / min Incl. autom. Stacker Incl. Sound enclosure basic machine with the following Sonderausfürung: also set up first upper cutter for fillet work, throat depth for 2nd upper cutter... more
4-SIDED PLANER COSTA EURO 23 4-SIDED PLANER COSTA EURO 23 6
4-sided Planer COSTA EURO 23 plane measure 150 x 230 mm. UNI shaft feed 0-27 m, a condition only 5 900.--+ VAT C2jmc more
4-sided planer Kupfermuehle 4-sided planer Kupfermuehle 5

4-sided planer Kupfermuehle

Weil am Rhein Germany
6607 km
USED
Planing width 2 Sided: 500 mm Working height 2 Sided: 200 mm planing width 4 sides: 500 mm Working height 4-sided: 120 mm B7lgu more
4-SIDED PLANER KUPFERMUEHLE K 30 4-SIDED PLANER KUPFERMUEHLE K 30 1
Elect./Voltage: 380/400 V, 50/60 Hz, 3 Ph. KUPFERMUEHLE K 30 - 4-sided planer, for laminated beams, with 6 heads. -- Working width up to 300 mm (11-13/16"). -- Maximum thickness up to 250 mm (9-3/16"), minimum 15 mm (9/16").Head configuration: -- (2) Top and (2) bottom heads with knife jointers and counter support bearings. -- (1) side head left & (1) side head right. -- Chamfer sets top and [...] system: -- Feed speed up to 170 m/min (557 FPM). -- The feed system is driven by an in... more
4-sided planer  KUPFERMUEHLE OMEGA  KST 4-sided planer  KUPFERMUEHLE OMEGA  KST 5

4-sided planer KUPFERMUEHLE OMEGA KST

Achern-Gamshurst Germany
6583 km
1989
USED
- Working height (table height) 885 mm> constant < - front table for adjustable undervoltage setting - Machine frame in heavy welded construction with removable tops - Electronic width adjustment Cggoq more
4- sided wide planer REX Homs 410K REX Homs 410K 4- sided wide planer REX Homs 410K REX Homs 410K 6
Heavy-duty Planning and Moulding Mashine Produce profiled log or boards, or gluelam. Width of up 410 mm Number of spindles: -5 Working width: 410mm Working height: 300mm Constant table height Feed speed 6-48 m/min Motorpower working shafts: bottom shaft: A 11kW 2930min-1 top shaft: D 15kW 2935min-1 left shaft: FL 15kW 2935min-1 right shaft: FR 11kW 2930min-1 bottom shaft: 2.HU 11kW 2930min-1 Chamfering spindles 2 x 1,85 kW Feed power: 10kW height adjustment: 0,75 kW Voltage: 400V 50Hz Bouxx more
Hydraulic. Double-sided planer WALDRICH D 2525/4000 (Tisch 4000x1120) Hydraulic. Double-sided planer WALDRICH D 2525/4000 (Tisch 4000x1120) 3
. Hydraulic Double Column Planing machine Fabr WALDRICH type D 2525/4000 Year 1950 Specifications: Table dimensions 4000 x 1120 mm stroke length 4200 mm Max working width 1250 mm gr passage height 1250 mm pulling power 6300 kg Working speed 6 - 45 m / min.... Return speed 8-60 m / min. Feed the hor. Rests horizontally from 0.3 to 15 mm vertically from 0.15 to 7.5 mm feed the side rests vertically from 0.15 to 7.5 mm Qürbewegung hor. Supporte 1400 mm vertical movement hor. Rests 400 mm Side Supp... more
Four-sided planer H+K Quadroplan 220 Four-sided planer H+K Quadroplan 220 6
The four-side planer H + K QuadroPlan 220 is in good condition, ready for use. Planing Brite 220 mm Working height 140 mm 1. jointer down 2. Add the right width 3. Left 4. Dick wave top 5. Universal spindle 360 ​​rotatably L x B x H = 4500 mm x 1900 mm x 1700 mm Weight 3000 kg Machine Nr. 03023 voltage 400 V rated current 62 A frequency 50 Hz changes, errors, prior sale! Service / Parts by MATEC CH-4952 Eriswil / DE-79618 Rheinfelden Cbkqx more
4-sided Planer Kupfermuehle Doin 605 4-sided Planer Kupfermuehle Doin 605 6
Technical details: • MANUFACTURER . KUPFERMUEHLE • Type . VUIN 605 • Baujahr . 1979 / 2016 • Machine no. . 3476 • Working width, max. . 605 mm • Working height, min. / max. . 8 – 150 / 180 mm No. of spindles . 4 • 1: bottom spindle . 5.5 kW • Max. chip removal . 10 mm • 2: top spindle . 7.5 kW • Max. chip removal . 12 mm • 3: right-hand spindle . 4 kW _ max. 150 mm • Max. chip removal . 20 mm • 4: left-hand spindle . 7.5 kW _ max. 150 mm • Max. chip removal . 20 mm • Left-hand spindle as MOBI... more
4-SIDED PLANER KUPFERMUEHLE DOMA 4-SIDED PLANER KUPFERMUEHLE DOMA 1
Elect./Voltage: 380/400 V, 50/60 Hz, 3 Ph. KUPFERMUEHLE Doma-b 1320 - 4-sided planer, for laminated beams, with 4 heads. -- Top brand machine, completely overhauled in 2016 by major German machinery specialists. -- Working width 1,320 mm (52"), working height 300 mm (11-13/16"). When planing on 4 sides the max. working height is 250 mm (9-13/16"). -- Head configuration: -- 1st Head: Bottom planer head 18,5 kW (25 HP). -- 2nd Head: Top planer head 22 kW (30 HP). -- 3rd Head: Vertical... more
4-sided planer   REX HOMS 510 K 4-sided planer   REX HOMS 510 K 6
-max. 510 x 310 mm -power 115 kW, 30 kW below / above 37 kW / 18 kW right / left 18 kW / chamfer 2 +2 / feed 7.5 kW -4-sided 510 x 300 mm -constant table -PST control for wide and height -!machine equipped with plenty of accessor Bptrs more
Double sided planer REX HOMS-760-K Double sided planer REX HOMS-760-K 4
Condition 3 Working width 760 mm Working height 280 mm Spindle configuration b-t Motor power 15-18,5 kW Working height adjustments motorized Feed speed 4-60 m/min Driven bed rollers 3 Infeed rollers 3 Constant table height 920 mm Dimensions 2000 x 2000 x 2000 mm Voltage 380V 50Hz 3Ph. Weight 4000 kg Cufnc more
Four sided planer SVITAWA SVITAWA 1 Four sided planer SVITAWA SVITAWA 1 6
Four sided planer SVITAWA   - The machine in stock - After the technical review - ready to work - Stan bdb   TECHNICAL PARAMETERS   - Max planing width 500 mm - Max height of cut - sided 170 mm - Mac height of cut - on four 150 mm   - 2 horizontal shafts Four Knife - The diameter of vertical spindles fi 40 - 3 upper shafts extending - 3 lower shafts extending   - Adjustable rollers in the counter - TABLE ADJUSTABLE UP DOWN - POWER - ELECTRIC SPINDLE VERTICAL RIGHT PITCH   - ... more
4-SIDED PLANER-MATCHER YATES-AMERICAN A-20 4-SIDED PLANER-MATCHER YATES-AMERICAN A-20 1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Complete Yates American A20 12-Knife Planer Mill System System is operable and can be seen in operation! -- In Feed -- Unscrambler -- Planer feed table -- A-20 Planer -- Out feed -- 200' of 24" blow pipe with tree Clhs7 more
 3-sided planer KUPFERMUEHLE DELTA / 150 m/min  3-sided planer KUPFERMUEHLE DELTA / 150 m/min 4
-Planing height 3-sided 200 mm -Constant table height -Cardan drive -Exchangeable planer heads -Extraction device -Guide ruler at the right hand side -Top and bottom joint devices Cggn7 more
2 sided planer REX U-41K REX U-41K 2 sided planer REX U-41K REX U-41K 6
2 sided planer REX U-41K - Year Built 2004 - Very good technical condition - In stock TECHNICAL PARAMETERS : - A treatment width 2 x 410 mm - The amount of a treating 10 - 260 mm - Number of spindles 2 - Spindle configuration bottom-up - The speed of spindle 5200 U / min - Capacity of 11-11 kW motors - Infinitely variable feed rates of 5 - 45 m / min - Adjusts the front top - Adjust the table: up / down 4 cylinders - Lifting table POWER; UP AND DOWN - 3 pinch rolls in the tabletop LO... more
4-SIDED PLANER KUPFERMUEHLE VUIN 600 4-SIDED PLANER KUPFERMUEHLE VUIN 600 1
Elect./Voltage: 415 V, 50 Cy, 3 Ph. KUPFERMUHLE FOUR (4) Sided PLANER: 24" x 6" Opening cap., limited to 3-1/4" tool cuttingheight for the side heads. - Head configuration: Bottom 15 HP, Top 15 HP, Right side 10 HP, Left side 10 HP. --Specifications: -- Feed motor 3.75 HP, -- table raise-and-lower with 2.5 HP motor --Equipped with: (7) Powered feed rollers, -- (4) feed speeds of 20 - 30 - 40 & 60 FPM; --Sectional infeed rolls and chipbreaker -- Slatted table top on bottom cutterhead for ... more
4-SIDED PLANER MATCHER W/PROFILES STETSON-ROSS 612-C1 4-SIDED PLANER MATCHER W/PROFILES STETSON-ROSS 612-C1 1
Elect./Voltage: 440 V, 60 Cy, 3 Ph. STETSON_ROSS 4 SIDED PLANER-MATCHER Model 612-C1 -- 6-Heads, 15" x 8" capacity. - Head sequence: Top (2) 65 HP, bottom 65 HP, 35 HP on side heads, 65 HP top profile head and 25 HP bottom profile head; (20) top and bottom cylinders with 16 knife side heads. -- Includes: (3) Sets of profile yokes & (3) sets of side heads; manifold with dust hoods. -- NOTE: Offered without Feed Table. Cndut more
4-SIDED PLANER KUPFERMUEHLE DOMA 2050 4-SIDED PLANER KUPFERMUEHLE DOMA 2050 1
Elect./Voltage: 380/400 V, 50/60 Hz, 3 Ph. KUPFERMUEHLE Doma-g 2050 - 4-sided planer, for laminated beams, with 6 heads. -- Top brand machine, completely overhauled in 2011 by major German machinery specialists. -- The machine comes with a turntable which allows a machine rotation up to 180° to change feed direction and up to 70° rotation to accommodate curved beams, etc. -- Working width min. 100 mm (3-15/16"), max. 2,050 mm (80-11/16"), working height min. 30 mm (1-3/16"), max. 300 mm (... more
4-SIDED PLANER MATCHER W/PROFILES YATES-AMERICAN A-20 4-SIDED PLANER MATCHER W/PROFILES YATES-AMERICAN A-20 1
Elect./Voltage: 480 V, 60 Cy, 3 Ph. COMPLETE PLANING MILL INCLUDING: -- YATES-AMERICAN A-20 PLANER/MATCHER WITH TOP & BOTTOM PROFILERS -- (6) Head Yates-American A- 20 planer completely rebuilt to operate from 150 to 600 feet per minute. Planer capacity of 8" x 15”; feed is with a 40 HP motor complete with one electronic control for variable speeds. -- All heads are with V-belt drive components which include the grip-belt sheaves, split taper bushings, grip-belts and belt guards.... more
4-SIDED PLANER-MATCHER YATES-AMERICAN A-20 4-SIDED PLANER-MATCHER YATES-AMERICAN A-20 1
Elect./Voltage: 575 V, 60 Cy, 3 Ph. YATES A 20 High Speed 4-Sided Roughing Planer: 15" x 8" Width Capacity, 14-knife top and bottom planer cylinders;Equipped with: -- (2) 50 HP, 3,600 RPM machine-mounted motors with belt drive to the top head. -- (1) 50 HP, 3,600 RPM machine-mounted motor with belt drive to the bottom head. -- (1) 50 HP right and (1) 50 HP left 3,600 RPM machine-mounted motors with belt drive to the side [...] Specifications: -- 1-13/16" Spindle dia. for vertical spindl... more
4-SIDED PLANER KUPFERMUEHLE VUIN 760 4-SIDED PLANER KUPFERMUEHLE VUIN 760 1
Elect./Voltage: 380/400 V, 50/60 Hz, 3 Ph. KUPFERMUEHLE VUIN 760 - 4-sided planer. -- Top brand machine, checked and tested by major German machinery specialists, the machine is in excellent condition. -- Working width 760 mm (29-15/16"), working height 200 mm (7-7/8"). Max. working height with (4) spindles in use 85 mm (3-3/8"). -- Head configuration: -- 1st Head: Bottom planer head 7,5 kW (10 HP). -- 2nd Head: Top planer head 11 kW (15 HP). -- 3rd Head: Top planer head 11 kW (15 H... more
4-SIDED PLANER MATCHER W/PROFILES YATES-AMERICAN A-62 4-SIDED PLANER MATCHER W/PROFILES YATES-AMERICAN A-62 1
Elect./Voltage: YATES-AMERICAN 6-HEAD MODEL A-62 8” X 24” 8-KNIFE MOTORIZED PLANER MATCHER WITH DOUBLE MOTORIZED PROFILER: -- Top Head, 80HP (2-40HP) -- Bottom Head, 40HP -- Left Sidehead, 35HP -- Right Sidehead, 25HP -- Top Profile, 25HP -- Bottom Profile, 40HP -- Feed Rolls, 40HP -- Sidehead spindles are 1-13/16” straight and a large number of sideheads is included. Also includes some piping, spare parts, and operator’s controls. -- Planer has been w... more
DOUBLE-SIDED GLUE APPLICATOR KUPER KLM DOUBLE-SIDED GLUE APPLICATOR KUPER KLM 1
Elect./Voltage: 240/480 V, 60 Cy, 3 Ph KUPER KLM Dual Glue Applicator --Dual glue applicator applies glue to veneer edges for later glue up. -- Specifications: --2" Min. x 15-3/4" max. veneer width, --15-3/4" min x unlimited veneer length --Dual vertical roll type glue applicators with glue pot reservoirs (one each side) apply glue. -- Approx. 8' long powered roll infeed, left hand fence line with multiple vertical round guides --Right hand side adjustable (in & out) for veneer thicknes... more
Homag Single Sided Edgebander Homag KL77/A20/S2 Homag Single Sided Edgebander Homag KL77/A20/S2 2
Homag Single Edgbander Model KL77/A20/S2 6 Coil Infeed Pre Milling End Trim Top & Btm Flush Trim Top & Btm Corner Rounding Scraping Buffing C0fnb more
Single Sided Edge Bander Holz Her Contriga 1368F Single Sided Edge Bander Holz Her Contriga 1368F 5
Holz Her Contriga 1368F Single Sided Edge Bander with Pre Milling and Corner Rounding - 2013 CE Edge thickness coils 0.4 - 3mm Edge thickness strips 0.4 - 15mm Panel thickness 6 - 60mm Feed speed variable 12 -25m/min [ max speed corner rounding 20m/min ] Equipped with 24 x NC Servoaxis Control PPC 231 15" Touchscreen : + 128mb cf memory card + USB / Ethernet connections + LED indicator unit preselection + Extensive programme storage + Axis setting + Telesservice connection 1771 Air cushione... more
edge bander  single sided OTT EASYMATIC edge bander  single sided OTT EASYMATIC 6
Single sided edge bander with hot melt, fixed side at the right Edge thickness: 0,4 to 3 mm Workpiece thickness: 8 to 42 mm Min. workpiece width: 70 mm Feedspeed 12 m/min Workpiece transport by chain, top pressures with rubber rollers Sound enclosure over all trimming motors [...] Equipment: Edge magazine, guillotine for 3 mm edges Hot melt unit Pressure zone with1 driven and 3 non-driven rollers End trims, 2 motors of 0,18 kW Top/bottom fine and radius trimming, tilting, 2 x 0,5 kW Quick-exch... more
Planer Moulder Kuper SWT XL Planer Moulder Kuper SWT XL 1
Kuper SWT XL 2011 6 Head Moulder Pre Straightening Touch Screen Control Bed Rollers Feed by Inverer C0cbj more
SINGLE SURFACE PLANER OLIVER 299 SINGLE SURFACE PLANER OLIVER 299 1
Elect./Voltage: 220 V, 60 Cy, 3 Ph. OLIVER 299 Single Surface Planer;24" Width x 8" thickness cap., Cabinet Planer; -- 7.5 HP Cutterhead motor, and the OLIVER "ITCH" carbide cutterhead. -- 2 HP Gear box variable speed feed works with speeds of 15 - 60 FPM; sectional feed rolls, sectional chipbreakers. -- Complete with: Knife grinding equipment for OLIVER carbide cutterhead, knife setting device, top dust hood, quick set adjustment on bed [...] of the "Original" OLIVER Planers! Crz7h more
Double Sided Strip Edgebander IMA  Combima Double Sided Strip Edgebander IMA  Combima 3
IMA Combima Concept Double Sided Strip Edgebander Pre Milling 6 Coil Feeder x 2 Top & Bottom Rough Trim Top & Bottom Fine Trim Flat scraping Buffing Cz7xr more
Planer all round KUPFERMÜHLE VUIN 860 Planer all round KUPFERMÜHLE VUIN 860 6
Working width: 860 mm Max pass in height: 200 mm Milling height on both vertical spindles: 150 mm (spindle diameter on vertical spindles: 40 mm) Feedspeed in 6 steps between 7 and 23 m/min Duplex feedchains Pre-surfacing table 240 mm wide, 1600 mm length (adjustable over machine width) Motors: Surfacing spindle 4 kW Bottom spindle 7,5 kW Top spindle 11 kW Right vertical spindle 5,5 kW Left vertical spindle 5,5 kW Feedworks 2,2/2,9 kW Table rise and fall: 1 kW Additional infeed rollers Chs78 more
Single sided edge banding machine HOMAG KL 79/A20 Single sided edge banding machine HOMAG KL 79/A20 6
Single sided edge banding machine Brand: Homag Type: KL 79/A20 Year: 1997 Technical data: Length approx. 10,50 m Width approx. 1,40 m Height approx. 2,10 m Glue thickness up to 20 mm Glue height up to 60 mm Control NC 21 with workpiece support - scissor version with following units: Edge magazin for coils and stripes Edge pre-heating unit IR Glueing unit with pre-melting tank and application roller Pressure zone with 1 driven main pressure roll and 6 additional pressure rolls End trimming uni... more
double-sided high speed press RASTER HR 50 NL-4S double-sided high speed press RASTER HR 50 NL-4S 3
pressure 50 t stroke -50 mm no. of strokes 49-294 Hub/min throat 170 mm ram - range of adjustment 80 mm ram surface 600x360 mm table surface area 830x440 mm hole in the table 450/330x110/85 mm 350 mm total power requirement 12 kW weight of the machine ca. 6,5 t Css3p more

to

to

Change search