Used K30 for sale (149)

Condition: used, Year of construction: 1987, plate thickness 4 mm blade length 150 mm Fgodsyv Ntxepfx Anwjb cutting angle 30-120 ° Table dimensions 1000x650 mm

Condition: used, Year of construction: 1987, plate thickness 3 mm angle adjustable from - to 30 - 120 Grad table height 900 mm Fsdpfx Anoy Ihanswogb weight ca. 800 kg Cutting capacity: 3 mm St40 at 150 x 150 mm, 2 mm stainless steel; cutting angle continuously adjustable from 30° to 120°; pneumatic clamping for angle adjustment (Boschert system); machine is in good condition

Condition: good (used), functionality: fully functional, Year of construction: 1991, sheet thickness steel (max.): 6 mm, power: 0.004 kW (0.01 HP), overall weight: 1,600 kg, Cutting 6 mm at 400 N/mm² 4 mm at 600 N/mm² Stepless angle adjustment 30 - 120° Fgjdpfxsy Rf Ubj Anwsb Drive power approx. 4 kW

Condition: used, Year of construction: 2022, functionality: fully functional, input voltage: 24 V, Used Pepperl+Fuchs gateway module, removed from active industrial operation and transported to storage after decommissioning. The unit is fully functional and has been reset to factory default settings, ready for configuration and further use. Fgsdpfxjy Nkvuj Anweb

Condition: new, Year of construction: 2022, functionality: fully functional, Technical data = see data sheet PDF. Fedpfx Aneup D Alewjgb

Condition: used, Year of construction: 1989, Year 1989 angle stop 30 -120 Grad good condition . Anschlag weight 600 kg +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. Fgodoliuihepfx Anwjb +++++

Year of construction: 1994, condition: excellent (used), Hydraulic notching machine Fodpfxohygztj Anwogb Fab. BOSCHERT Type. K30-120 Very good condition, year 1994 Technical data Make BOSCHERT Type: K30-120 Year of manufacture: 1994 cutting capacity: 6 mm in St 40 / 4 mm in Niro blade length: 200 mm cutting angle: 30-120 working stroke: 40 mm table height: 900 mm Connected load: 6 kVA weight: approx. 1600 kg dimensions: approx. 1500 x 1200 x 1300 mm All data without guarantee. The machine is in a very good condition. A demonstration under power is possible at any time in our exhibition hall.

Condition: used, Year of construction: 1996, 4.0 mm 3.0 mm 30 - 120 Grad blade length 150 x 150 mm work height max. 900 mm table: 1000 x 650 mm engine output 3.0 kW weight 850 kg range L-W-H 1250 x 1000 x 1160 mm Furnishing: - Notching machine with angle adjustment 30° - 120° - Simple and functional "Touch Pad" control panel * Set-up stroke * Single stroke * continuous stroke - Plexiglas protection for better transparency - hardened knives also for cutting stainless steel - planed table surface * to avoid 'tilting' or 'slipping' of the metal sheet - adjustable lift height adjustment - Waste bin - free-moving footswitch - Operation manual BOSCHERT angle adjustment: - the one-piece 30° upper knife is within one tool both with a left and directly connected to a right lower knife - once for each notch over 30° left and once on the right. Fgjdpfxoxabpde Anwjb - the swivel adjustment becomes pneumatic, immediately after completion of the first notch, lightning fast carried out.

Condition: excellent (used), Talsa bowl cutter all S/S model K30. Knife Speed Variable between 500-3500rpm. 30 litre bowl. 3 knife assembly. with guard. Fgsdpfx Anex Sykgeweb

Condition: new, total length: 5,000 mm, total width: 4,250 mm, 21.25 m² storage platform, upper edge 300 cm, 500 kg/m², immediately ex warehouse, accessible with pallet truck, system platform, steel platform, storage level Data : - Length: 5000 mm - Width: 4250 mm - Size can be extended on request - Clear height below the platform: 2612 mm - Support grid: 4605 x 3850 mm - Plus 200 mm overhang of the floor covering - Uprights, cross bracing & dome struts powder-coated in RAL 7016 - Main & secondary beams galvanized - Floor covering: 38 mm chipboard P6, top natural & bottom white - New from stock Wietmarschen - AVAILABLE IMMEDIATELY Storage platform consists of : - 04 x upright - 02 x main beam C+350 - 06 x secondary beam S+260 - 01 x intersection - 02 x strut brace - 10 x chipboard - Incl. connecting material & screws -- IMMEDIATELY AVAILABLE SEVERAL TIMES Price : 2590,00 € net 3082,10 € gross You will receive an invoice with VAT shown. Transportation : The delivery is carried out on request by our partner forwarding agency, the costs for this depend on the postal code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... Fgodpfxoy Izh Ss Anwjb We will be happy to help you with the realization of your projects, from planning and ordering to installation. Are you interested or do you have any questions? Simply contact us by message or phone call. You can find our telephone number on our company page. ☎️ You can reach us by phone from Monday to Friday, 08:00 - 15:00. Alternatively, you can send us a message with your name and number and we will get back to you as soon as possible.

Condition: excellent (used), • Manufacturer: ABUS KG – Germany • Type: K-300 1-4 • Motor power: 3.8 kW • Power supply: 400 V / 50 Hz • Equipped with an electromagnetic brake – braking torque 90 Nm • Gear shaft – diameter approx. 34 mm • Mounting: square flange • Robust industrial design, dedicated for use in ABUS cranes and hoists • Condition: used, fully operational (actual photos) Fgedpfxjxbfutj Anwsb

Condition: like new (used), functionality: fully functional, Year of construction: 2025, degree of automation: semi-automatic, actuation type: electric, number of rollers: 3, roller diameter: 118 mm, overall weight: 220 kg, power: 0.75 kW (1.02 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, hardened rollers, NEW!!! LFSS PK 30 Profile bending machine, pipe bender 30mm /ct2275/ Manufacturer: LFSS Type: PK30 Year of manufacture: 2025 Horizontal and vertical operation Rollers: 2 driven Upper roller up-down movement manually Max. shaft diameter: 30 mm Fgedpfexh D Nvox Anwob Working speed: 4 m/min Bending capacity: - Flat steel: 50 x 10 mm - Square 35 mm - Closed section: 40x 40 mm - Pipe 48 x 3 mm Power: 400 V / 0.75 kW 50Hz Electric foot switch with emergency stop Standard bending set Weight: approx. 200 kg CE certification Instructions in German or English Dimensions: W 700 x H 1450 x D:750 mm

Condition: excellent (used), Year of construction: 1997, Rip and cross saw REMA DMLK 30 Producer of REMA Machine model / type DMLK 30 Year of production 1997 Machine category Longitudinal and transverse saw Location Gorzów Wlkp. Conditions of delivery PERSONAL COLLECTION Cost of delivery Customer cover Startup type to be agreed Description Comments Fsdpfx Ajfv Hphonwjgb - after the technical review - very good condition - year of production 1997 TECHNICAL PARAMETERS: main engine 3.9 kW trolley length 1370 mm blade diameter 300 mm angle adjustment 0 - 45 " height adjustment cutting height max. 90 mm cutting width on the right side 885 mm ruler length 1350 mm ratchet extended receiving table two kinds of blade rotation speed 3700 and 5000 RPM The protractor visible in the photos is an additional option for PLN 400 net dimensions: length / width / height 135 x 85 x 135 cm weight ~ 320 kg

Condition: ready for operation (used), Acomel K 3000 frequency converter – Dimensions: 81cm x 53cm, used, in good condition, 100% fully functional, scope of delivery as per photos. ATTENTION: Please enquire separately for packing and shipping costs! Fjdpfsx Eqpmjx Anwjgb

Condition: excellent (used), Year of construction: 2012, Werth Scope-Check 300x200x200 3D CNC coordinate measuring machine TECHNICAL DATA Measuring capacity (X x Y x Z): 300 x 200 x 200 mm Work table, load capacity: 20 kg Magnification: X5 Resolution: 0.5 micron Weight: Approx. 300 kg Fodpfxevffcps Anwegb No responsibility is taken for the accuracy, completeness and up-to-dateness of the information provided

Condition: excellent (used), Year of construction: 2013, Vacuum Press, Vacuum Table, Joos Vacuum Table with Silicone Membrane Universally applicable press, veneer press for veneering, coating, form bonding, form veneering, edge gluing, etc. With this press, you can generally do without a hydraulic veneer press, though with some limitations. New heat-resistant silicone membrane, extremely elastic and easy to clean. Also suitable for the molding of preheated thermoplastic materials such as acrylic glass or solid surface materials. Frame inner dimensions approx. 2900 x 1410mm, usable surface approx. 2800 x 1300mm Fsdpfx Ansy Hl Hpjwsgb Working height approx. 900mm Vacuum pump Becker VT4.40, 400V, 1.5 kW with 40 m³/h output, and two vacuum tanks of 200 liters each, allowing comfortable operation and rapid evacuation. Electronic vacuum pressure switch, so the pump switches off when the required vacuum is reached and does not run continuously Mobile on four swivel castors, lockable Frame can be easily folded up, secured with two catches Double frame for quick membrane changes Currently fitted with a new silicone membrane Rapid vacuum distribution thanks to grooved base plate CE mark Original paintwork, some areas retouched Both the silicone membrane and base plate have been renewed; the machine is ready for immediate operation. Dimensions approx. 3100 x 1550 x 1020mm (LxWxH). Weight approx. 550kg. The machine can be demonstrated at our site by appointment. We only offer machines that are ready for demonstration in our warehouse – see “Further offers from this supplier.”

Condition: new, bending speed 2.1 m/min Bending capacity - square 30x30 mm bending capacity - flat iron 80x15 mm Bending capacity - flat iron on edge 50x10 mm tube diameter 1" oder 60x2 mm Shaft diameter - upper 35 mm Shaft diameter - lower 30 mm total power requirement 0,75 kw range L-W-H 650 x 500 x 1300 mm Fedpfx Ajy H N Rfonwegb weight 170 kg Standard features: - hardened special steel shafts - a set of hardened rollers - Bottom rollers are driven - lateral straightening rollers - Foot pedal - horizontal and vertical working

Condition: excellent (used), mileage: 7,101 km, power: 330 kW (448.67 HP), first registration: 12/2012, fuel type: diesel, fuel: diesel, color: other, total length: 9,110 mm, total width: 2,550 mm, Year of construction: 2012, operating hours: 2,947 h, Technical information Number of cylinders: 6 Engine capacity: 12.913 cc Weights Empty weight: 35.750 kg Fgodpfxeydcibj Anwsb Carrying capacity: 250 kg GVW: 36.000 kg Functional Mast length: 34 m CE mark: yes Condition Technical condition: very good Visual appearance: very good Financial information Price: On request Identification Registration number: 78-BBR-1 = Dealer information = We do not charge delivery costs. All trade-ins and financing are possible. Although we take great care in preparing our advertisements, it is possible that some of the options described may or may not be present on the car. Please check before purchasing that all the options described that are important to you are actually present. We are RDW certified. You can opt for an extended warranty; see our website for the packages. All our cars have a clear maintenance history and mileage registration. Our opening hours are: Monday to Friday from 9:00 a.m. to 5:00 p.m. and evenings by appointment. Saturday from 9:00 a.m. to 3:00 p.m. You can find us at: Middelingenseweg 22 5321 JH Hedel The Netherlands And reach us at: Trucks: Passenger cars: Website: Email:

Condition: excellent (used), mileage: 7,101 km, power: 330 kW (448.67 HP), fuel type: diesel, color: other, first registration: 12/2012, Year of construction: 2012, operating hours: 2,947 h, Technical information Number of cylinders: 6 Engine capacity: 12.913 cc Measures Dimensions (LxW): 911 x 255 cm Weights Empty weight: 35.750 kg Carrying capacity: 250 kg GVW: 36.000 kg Functional Mast length: 34 m CE mark: yes Condition Technical condition: very good Visual appearance: very good Financial information Price: On request Identification Registration number: 78-BBR-1 Fedpfxoydcn Do Anwsgb = Dealer information = We do not charge delivery costs. All trade-ins and financing are possible. Although we take great care in preparing our advertisements, it is possible that some of the options described may or may not be present on the car. Please check before purchasing that all the options described that are important to you are actually present. We are RDW certified. You can opt for an extended warranty; see our website for the packages. All our cars have a clear maintenance history and mileage registration. Our opening hours are: Monday to Friday from 9:00 a.m. to 5:00 p.m. and evenings by appointment. Saturday from 9:00 a.m. to 3:00 p.m. You can find us at: Middelingenseweg 22 5321 JH Hedel The Netherlands And reach us at: Trucks: Passenger cars: Website: Email:

Condition: excellent (used), color: blue, lifting height: 30,000 mm, Year of construction: 2019, operating hours: 1,667 h, General information Field of application: Construction Drivetrain Drive: Wheel Make of engine: Honda Weights Empty weight: 3.490 kg Functional Lifting capacity: 1.500 kg CE mark: yes Condition Technical condition: very good Visual appearance: very good Other information Delivery terms: EXW Fedpfxew Tykbs Anwjgb Production country: DE Additional information Please contact Vink Machinery for more information = Additional options and accessories = - Hook blocks = Remarks = Bocker AHK 30/1500 • 2019 • 1667 working hours • Gasoline drive • Remote control • Automatic outrigger • Variable outrigger • Wheel drive • 1500 kg lifting capacity • 30-meter hook height • 25-meter horizontal reach • The fuel engine and printed circuit board were replaced in March 2025

Condition: used, mileage: 1,001 km, first registration: 01/2011, empty load weight: 3,000 kg, maximum load weight: 27,000 kg, overall weight: 30,000 kg, color: grey, driver cabin: other, gearing type: other, loading space length: 6,500 mm, Year of construction: 2011, Vehicle location: Bovenden, container locking Body: 30t roll-off system Meiller RK 30.62 K for containers up to 6.5 m (up to 6,500 mm container length), hydraulic axle support, aluminium chequer plate mudguards, new and used containers available, as well as hydraulic pump at extra cost. ACCESSORY DETAILS WITHOUT WARRANTY; subject to changes, prior sale, and errors! Fgsdpfx Anjy Nd Nuoweb

Condition: excellent (used), color: green, lifting height: 30,000 mm, Year of construction: 2011, operating hours: 2,958 h, General information Field of application: Construction Drivetrain Make of engine: Honda Weights Empty weight: 3.490 kg Functional Lifting capacity: 1.400 kg CE mark: yes Condition Technical condition: very good Visual appearance: very good Other information Delivery terms: EXW Production country: DE Additional information Please contact Vink Machinery for more information = Additional options and accessories = - Hook blocks = Remarks = Bocker AHK 30/1400 * 2011 * Petrol drive * 2958 working hours * 30-meter hook height * 25-meter horizontal reach * Remote control * 1400 kg lifting capacity * Wheel drive * Includes documents Fgodpjxb Uy Eefx Anwjb

Condition: used, mileage: 173,364 km, Year of construction: 2015, operating hours: 13,338 h, General information Field of application: Construction Serial number: 605027 Fodew D N N Njpfx Anwogb Drivetrain Drive: Wheel Weights Empty weight: 43.360 kg Functional Lifting capacity: 60.000 kg Other information Front tyres / undercarriage remaining: 70 Rear tyres remaining : 70 Tyre brand: Michellin Carrier engine: - Upper engine: - Counterweight: 13600 Transport dimensions (LxWxH): 10.9x2.55x3.62 Additional information Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 1999, used fan Radial fan with V-belt drive Suitable for use in raw air and clean air applications Steel impeller with steel blades mounted on a multi-bearing intermediate shaft Discharge direction GL 360/5 Connection 300 mm Motor power 11 kW Air flow 7000 m³/h Fgodpfx Ansy Dkgvswob Availability: short-term Location: Röllbach

Condition: new, functionality: fully functional, fuel type: hybrid, color: blue, overall weight: 2,900 kg, empty load weight: 2,900 kg, operation weight: 2,900 kg, lifting power: 2,980 kg/m, tire condition: 100 %, Year of construction: 2024, operating hours: 1 h, Equipment: adjustable boom, crane, hydraulics, low noise, onboard computer, rubber tracks, 🔧 Key Specifications: • Year: 2024 • Operating hours: 1 h (NEW) • Max capacity: 2,980 kg (main boom) / 1,000 kg (with jib) • Max lifting height: 16.95 m (with jib) / 12.0 m (main boom) • Max working radius: 14.3 m • Power: Bi-energy (diesel + electric + battery) • Remote control: Fully proportional radio control • Hydraulic winch: Yes • Jib: Hydraulic telescopic jib included • Undercarriage: Variable crawler gauge • Outriggers: Automatic multi-position outriggers • Tracks: Rubber tracks (non-marking) • Weight: approx. 2,900 kg • CE certification: Yes ✨ Highlights: ✅ Bi-energy spider crane (diesel + electric operation) ✅ Suitable for indoor & zero-emission working ✅ Fully proportional remote control ✅ Hydraulic winch for precise lifting operations ✅ Hydraulic telescopic jib for extended reach Fgedpfxey Hqhre Anwsb ✅ Variable crawler gauge for maximum stability ✅ Automatic multi-position outriggers ✅ Compact design for confined spaces ✅ Ready for immediate deployment ⚙️ Condition: New machine — never used. Factory-new condition with full inspection and CE certification. 🌍 Location & Price: 📍 Sittard, Netherlands 🚚 Worldwide delivery available 💰 Price: €119,500 (EXW / excl. VAT) 🚚 Delivery: • Crane loading available • Flexible transport options • Handled by Collé Rental & Sales logistics