Used R70 for sale (143)

Condition: used, functionality: fully functional, Year of construction: 2000, operating hours: 7,278 h, load capacity: 4,500 kg, lifting height: 3,200 mm, free lift: 150 mm, fuel type: diesel, mast type: simplex, construction height: 2,400 mm, drive type: Diesel, Diesel forklift Ledpfxjzuhhij Ancoag Load center: 500 Mast type: Standard Technical condition: good Front tire type: Superelastic Front tire condition: 60 - 80% Rear tire type: Superelastic Rear tire condition: 60 - 80% Heater, soot filter, full cabin

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, operating hours: 2,778 h, load capacity: 4,000 kg, lifting height: 3,320 mm, fuel type: diesel, gearing type: automatic, Equipment: adjustable boom, cabin, lighting, pallet forks, Year of manufacture 2006, originally only 2778 operating hours, diesel engine with automatic transmission, starts immediately. 24V battery system (2 x standard 12V batteries) Lifting height 3320mm. Full cabin, low overall height Fork adjustment, hydraulic, long forks Ljdpjz Dui Nefx Ancjag Large wheels for off-road use.

Condition: used, functionality: fully functional, Year of construction: 2005, operating hours: 10,237 h, load capacity: 4,500 kg, lifting height: 3,880 mm, fuel type: diesel, mast type: simplex, construction height: 2,600 mm, power: 53 kW (72.06 HP), motor manufacturer: Deutz, gearing type: hydrostat, fork length: 1,800 mm, empty load weight: 6,412 kg, total height: 2,600 mm, color: orange, motor model: BF 4M 1012E, Equipment: adjustable boom, cabin, front guard, lighting, pallet forks, sideshift, trailer coupling, Forklift truck: + Still Laedpfx Ajwqc Tboncjg + R70 45 + Year of manufacture 2005 + 10,237 operating hours + Deutz diesel engine, BF 4M 1012 E, 72HP + Own weight: 6,412kg + Lifting capacity: 4,500kg + Height: 260cm + Fork length: 180cm + Lifting height: 388cm + Sideshift + Hydraulic fork adjustment + Full cabin with heating and work lights + Yellow light + Forklift from 1st owner Receive all newly listed vehicles by email – sign up for our NEWSLETTER! Errors and spelling mistakes possible, intermediate sale reserved!

Condition: used, Year of construction: 2006, operating hours: 4,955 h, load capacity: 8,000 kg, fuel type: diesel, gearing type: automatic, Equipment: cabin, Still R 70-80 forklift Cabin, hydraulic side shifter, heater. Load capacity: 8,000 kg Unladen weight: 11,277 kg Lasdpfx Anozhdqgeceg

Condition: used, functionality: fully functional, Year of construction: 1996, operating hours: 15,675 h, load capacity: 6,000 kg, lifting height: 3,150 mm, fuel type: diesel, mast type: telescopic, construction height: 2,750 mm, fork length: 1,200 mm, empty load weight: 9,507 kg, drive type: Diesel, Diesel forklift Load center: 600 ISO class: ISO Class 4 = 5,000 - 10,000 kg Mast type: Telescopic Transmission: Electromechanical Condition: Ready for use and fully functional Technical condition: normal Front tire type: Pneumatic Front tire size: 355/65-15 Lsdpfx Anjzywniecoag Rear tire type: Pneumatic Rear tire size: 315/70-15 Description: In addition to this unit, we offer other forklifts and warehouse equipment. Our equipment is workshop-tested and complies with FEM4.004. Please contact us by email or by phone. You can also find us at hsr-gabelstapler. Of course, we also buy your used equipment, even if you do not purchase a vehicle from us. Lease purchase and financing at favorable terms are available upon request. We will be happy to provide you with competent and detailed advice on our vehicles. 3rd valve, 4th valve, rear work light, front work light, heater, full cabin, interior mirror, exterior mirror, windshield wiper, single pedal, seat.

Condition: good (used), functionality: fully functional, Year of construction: 2001, operating hours: 13,254 h, load capacity: 3,500 kg, lifting height: 3,500 mm, free lift: 150 mm, load center: 500 mm, fuel type: diesel, mast type: mono, construction height: 2,500 mm, motor manufacturer: Deutz, fork length: 1,200 mm, empty load weight: 6,100 kg, Equipment: cabin, lighting, pallet forks, sideshift, trailer coupling, Still H 35 T - ex German Army (Bundeswehr) Manufactured in Germany. Good condition, technically sound and ready for operation. Operating hours have been read off. 13,254 operating hours Full cab Exterior mirrors Heater STVO-compliant lighting 2 rear work lights Standard mast Lifting height: 3,500 mm Overall height: 2,500 mm Free lift: 150 mm Integrated side shifter Forks: 1,200 x 125 x 45 mm - N E W - Forks: 1,200 mm Lasdsyrdwvepfx Ancsg 3rd valve SE tyres Front tyres 80% Rear tyres 80% Technical specifications subject to error. Sale takes place without warranty.

Condition: used, machine/vehicle number: IC1376, Year of construction: 1998, operating hours: 13,418 h, load capacity: 3,500 kg, lifting height: 3,500 mm, fuel type: diesel, mast type: duplex, construction height: 2,450 mm, Equipment: 3rd hydraulic function, 4th hydraulic function, 5153720 Lasdpoy Rwbmsfx Ancjg Serial Number: 517048001699 Internationaler Transport möglich/ International delivery available

Condition: used, functionality: fully functional, Year of construction: 1991, operating hours: 11,154 h, load capacity: 8,000 kg, lifting height: 4,000 mm, fuel type: diesel, mast type: simplex, construction height: 2,500 mm, fork carriage width: 2,150 mm, fork length: 2,400 mm, empty load weight: 11,520 kg, total length: 3,700 mm, drive type: Diesel, construction width: 2,240 mm, Diesel Forklift Load Center: 600 mm Fork Width: 200 mm Fork Thickness: 90 mm Mast Type: Standard Condition: Operational and fully functional Technical Condition: Very good Lodpfx Aney E Uv Rscsag Front Tyres Type: Superelastic Front Tyres Size: 8.25-15 Rear Tyres Type: Superelastic Rear Tyres Size: 8.25-15 Description: In addition to this Still model, we have around 200 heavy-duty forklifts, compact forklifts, counterbalance forklifts & sideloaders in stock at our Hamburg and Gdansk warehouses. Visit our website - sago-online. Lease purchase & financing options are always available on attractive terms. We are also interested in purchasing your used equipment outright, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed advice about this R70-80. P.S.: Our master workshop is specialized in repair, maintenance, overhaul and customization of forklifts from 8 tons upwards. We are also happy to display your vehicle for consignment sale with us. Side shifter, Heater, Full cabin,

Condition: used, Year of construction: 2008, load capacity: 7,000 kg, lifting height: 3,100 mm, fuel type: diesel, construction height: 3,580 mm, power: 75 kW (101.97 HP), gearing type: other, overall weight: 18,560 kg, empty load weight: 11,559 kg, total length: 4,593 mm, color: orange, mileage: 5,140 km, first registration: 12/2008, suspension: other, driver cabin: other, wheelbase: 2,250 mm, emission class: none, fuel: diesel, Equipment: air conditioning, The forklift is running, and the mast is operational, but the vehicle does not move. The Still R70-70 is a powerful and reliable forklift designed for demanding applications in industry, warehouse logistics, and material handling operations. With its robust construction, proven technology, and exceptionally low operating hours of only 5,140, this vehicle offers an excellent opportunity for companies that prioritize quality, efficiency, and durability. Powered by a powerful engine with a displacement of 4,038 cm³, the Still R70-70 impresses with its high performance and confident operation, even with heavy loads. The well-known reliability of the R70 series makes it a valued piece of equipment for daily use, where productivity and operational reliability are crucial. The existing air conditioning system is particularly noteworthy, as it provides the driver with a comfortable working environment even on warm days. This increases comfort, reduces strain, and contributes to consistently high work performance, especially during extended operating times. The duplex mast design ensures excellent forward visibility while simultaneously enabling flexible use during loading and unloading, as well as storage operations. Lodpfsy Tzmfsx Ancoag With initial registration in December 2008, this forklift presents itself as a proven and well-developed machine, whose technology has proven itself over many years of professional use. The wheelbase of 2,250 mm ensures stable handling and supports safe operation even during demanding tasks. The low operating hours of only 5,140 make this vehicle particularly attractive. Compared to many other machines in this class, the forklift is in a condition that suggests relatively gentle use and offers great potential for many more hours of operation. The Still R70-70 is the ideal choice for companies looking for a powerful, comfortable, and economical forklift. Its robust technology, air conditioning, duplex design, and low operating hours make it an investment that quickly pays for itself through reliability and productivity. A piece of equipment that is ready to efficiently and confidently handle your daily challenges. Sale only to commercial businesses (agriculture, freelancers, small and large businesses) or for export. Subject to errors and prior sale.

Condition: ready for operation (used), Year of construction: 2008, operating hours: 1,750 h, functionality: fully functional, power: 18 kW (24.47 HP), maximum load weight: 1,200 kg, Wood shredder – Untha LR 700, in perfect working order, 18.5 kW, from a former carpentry workshop, can be tested. Lajdpfxezy Rmfe Ancog

Condition: used, functionality: fully functional, Year of construction: 1994, operating hours: 8,451 h, load capacity: 4,000 kg, lifting height: 3,400 mm, fuel type: diesel, mast type: telescopic, construction height: 2,320 mm, fork length: 1,900 mm, empty load weight: 5,875 kg, drive type: Diesel, Diesel forklift Ledpfxjy Eudue Ancoag Load center: 500 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Telescopic Transmission: Electromechanical Condition: Ready for operation and fully functional Technical condition: Good Front tire type: Superelastic Front tire size: 250-15 Rear tire type: Superelastic Rear tire size: 250-15 Description: In addition to this unit, we offer a range of other forklifts and warehouse equipment. Our machines are workshop-serviced and FEM4.004 inspected. Please contact us by email or phone. You can also find us at hsr-gabelstapler. Of course, we also purchase your used equipment, even if you do not buy a vehicle from us. Lease-purchase and financing options at attractive terms are available on request. We are happy to provide you with detailed and expert advice on our vehicles. Sideshift, fork positioner, 3rd valve, 4th valve, single pedal, seat,

Condition: good (used), Year of construction: 1991, operating hours: 6,903 h, load capacity: 1,600 kg, lifting height: 5,050 mm, fuel type: gas, mast type: triplex, construction height: 2,170 mm, empty load weight: 2,953 kg, mileage: 6,903 km, Triplex forklift, LPG powered. Brand: STILL Year of manufacture: 1991 In good working order, drives and lifts well. Capacity: 1,600 kg Lifting height: 5,050 mm Laedpfx Aszcntcjncsg Mast lowered height: 2,170 mm Equipped with a FREELIFT mast. Fork length: 1200 mm Watch the video on YouTube.

Condition: used, functionality: fully functional, Year of construction: 2007, operating hours: 3,030 h, load capacity: 2,000 kg, lifting height: 3,450 mm, free lift: 30 mm, fuel type: gas, mast type: simplex, construction height: 2,250 mm, fork carriage width: 980 mm, fork length: 1,200 mm, empty load weight: 3,216 kg, total length: 2,250 mm, drive type: Treibgas, construction width: 1,110 mm, LPG forklift Load center: 500 Fork width: 100 mm Fork thickness: 40 mm ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Standard Condition: Ready for operation and fully functional Technical condition: very good Front tire type: Super elastic Front tire size: 200/50-10 Front tire condition: 20 - 40% Rear tire type: Non marking Rear tire size: 18x7-8 Rear tire condition: 80 - 100% Sideshift, Ljdpfxsykgqie Ancjag 3rd valve,

Condition: good (used), Year of construction: 1970, POREBA TR 70 BIS Conventional Lathe 700 x 2000 mm Heavy-duty conventional lathe in used condition. Manufacturer: POREBA Model: TR 70 BIS Swing over bed: 700 mm Swing over cross slide: approx. 420 mm Turning length: 2,000 mm Spindle bore: approx. 80 mm Ledpfoz Dkvfex Anceag Spindle speed: approx. 10-1,000 rpm Main motor: approx. 14 kW 3-jaw chuck, faceplate Tailstock Additional chucks / faceplates included Machine weight: approx. 5,000 kg

Year of construction: 2012, operating hours: 50 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 120501, High-frequency generator, 70 kW, frequency range: 120 - 450 kHz, including energy controller, current controller, and bus interface. Lodozxwx Ejpfx Ancjag Ground fault monitoring, adjustable.

Condition: ready for operation (used), functionality: fully functional, fuel type: diesel, Beautiful Still R70-20 forklift with a diesel engine. Lajdezhnxhspfx Ancjg It has new oil and filters and runs perfectly. Features 2 extra functions!

Year of construction: 2012, condition: ready for operation (used), functionality: fully functional, Rockster R700S Impact Crusher – 2012 – Magnet – Ready to Work Brand / Model: Rockster R700S Year: 2012 Serial Number: 70106 Engine: IVECO Engine Serial: 0935798 Operating Hours: approx. 2,386 h Location: Romania Description Well-maintained Rockster R700S mobile impact crusher, designed for efficient recycling of construction materials such as concrete, asphalt, and demolition waste. Compact, powerful, and easy to transport – ideal for small to medium-sized crushing operations. Condition Good working condition Regularly serviced Ready for immediate use Features & Equipment Ljdpfx Aoy E Sfvjncjag Tracked mobile impact crusher Fuel-efficient IVECO engine Integrated magnet separator Easy-to-use control system High mobility and fast setup Suitable for recycling and aggregate production Additional Information Machine available for inspection in Romania.

Condition: good (used), Year of construction: 2007, functionality: fully functional, total width: 4,015 mm, total length: 13,640 mm, total height: 940 mm, overall weight: 8,300 kg, input current: 32 A, input voltage: 400 V, input frequency: 50 Hz, compressed air connection: 6 bar, pressure: 6 bar, cutting length (max.): 3,700 mm, Project / Item: Used Hegla glass cutting line (year of manufacture 2007) Hegla EcoLam 37 Plus: Lodpfx Aez Apcwoncsag Laminated safety glass (LSG) cutting system with integrated loading arms. (2007) Hegla LT 2034: Fixed transport table for glass transfer within the cutting line. (2007) Hegla LKTR 7034: Combined transport and tilting table, equipped with air cushions and conveyor belts. (2007) 2. TECHNICAL SPECIFICATIONS OF THE SYSTEMS 2.1 Hegla EcoLam 37 Plus (LSG cutting system) - Equipment: Integrated loading arms for automatic/manual glass handling - Dimensions: Length: 3,280 mm | Width: 4,780 mm | Table width: 4,015 mm - Working height: 940 mm - Maximum glass dimensions: 6,100 mm x 3,210 mm - Maximum cutting length: 3,700 mm - Stop length: 160 mm to 2,000 mm - Cutting accuracy: +/- 0.5 mm - Weight: 4000 kg - Glass thickness (LSG): 2 x 3 mm to 2 x 8 mm - PVB film thickness: 0.38 mm to 3.8 mm - Connection values: 3 x 400 V / PE, 50 Hz | Power: 20 kW - Air pressure: 6 bar 2.2 Hegla LT 2034 (Transport table) - Function: Fixed station for intermediate transport - Dimensions: Length: 2,000 mm | Width: 3,400 mm - Working height: 3,400 mm - Weight: 800 kg - Maximum glass dimensions: 3,210 mm x 6,100 mm - Connection values: 3 x 400 V / PE, 50 Hz | Air pressure: 6 bar 2.3 Hegla LKTR 7034 (Transport and tilting table) - Function: Transport table with tilting function, integrated conveyor belts and air cushion system - Dimensions: Length: 7,000 mm | Width: 3,450 mm - Working height: 940 mm - Total weight: approx. 3,500 kg - Connection values: 400 V, 50 Hz | Power: 11 kW (according to layout drawing max. 17 kW / 45A) | Air pressure: 6 to 8 bar Total length of the core line: 13,640 mm - EcoLam area: 4,610 mm - LT area: 2,030 mm - LKTR area: 7,000 mm

Condition: used, functionality: not functional, Year of construction: 2007, load capacity: 7,000 kg, lifting height: 4,000 mm, fuel type: diesel, mast type: simplex, construction height: 3,100 mm, fork carriage width: 2,100 mm, empty load weight: 10,784 kg, drive type: Diesel, Diesel forklift Load center: 600 Mast type: Standard Technical condition: Used for spare parts Front tire type: Superelastic Ledpfx Anjza Iy Dsceag Front tire size: 355/65-15 Rear tire type: Superelastic Rear tire size: 3.00-15 Description: R70-70 - Forklift for spare parts Full cabin Forklift for spare parts

Condition: used, functionality: fully functional, Year of construction: 2010, load capacity: 5,000 kg, lifting height: 3,480 mm, fuel type: gas, mast type: telescopic, construction height: 2,550 mm, fork carriage width: 1,300 mm, fork length: 1,200 mm, empty load weight: 6,615 kg, drive type: Treibgas, Internal combustion forklift Load center: 500 ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Telescopic Transmission: Electromechanical Condition: Ready for use and fully functional Technical condition: very good Front tire type: Superelastic Front tire size: 355/45-15 Rear tire type: Superelastic Rear tire size: 250-15 Description: In addition to this unit, we offer other forklifts and warehouse equipment. Our equipment is workshop-checked and FEM4.004 certified. Please contact us by email or by phone. You can also find us at hsr-gabelstapler. Of course, we also buy your used equipment, even if you do not purchase a vehicle from us. Lease purchase and financing at favorable terms are available upon request. We will be happy to provide you with competent and detailed advice on our vehicles. 3rd valve, rear work light, front work light, roof protection, interior mirror, joystick, rotating beacon, single-pedal operation, LED, seat. Ljdpsy Tz Ayofx Anceag

Condition: used, machine/vehicle number: 70410188, Year of construction: 1991, fuel type: diesel, weight max. in kg:3500 kg stroke:3300 mm fork length:2400 mm width of fork carrier plate:1300 mm height over floor:2350 mm weight:5799 kg :10020 kg :9140 kg :3000 kg weight of the machine ca.:5,8 t dimensions of the machine ca.:4,70 x 1,36 x 2,36 m Ljdpecxxv Rsfx Ancsag :2,25 x 1,36 x 2,36 m equipped with safety glass front and back, opening rear panel, windscreen wipers front and back, reversing light, brake lights, indicators front and back, front lights, adjustable seat, safety belt, hand brake, tank gauge, engine-hour display, solid-rubber tyres

Condition: used, Year of construction: 2019, functionality: fully functional, Laser engraving machine, Trotec Speedmarker 700 Year of manufacture: 2019 Location: Bad Tölz Lsdpfjzudyusx Ancsag Inspection is welcome. We have other used machines available. Please contact us.

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, control type: CNC control, degree of automation: automatic, tube wall thickness (max.): 2 mm, Giętarka do rur CNC SHUZ TUNG CNC38BR2 Producent: SHUZ TUNG Machinery Industrial Co., Ltd. (Tajwan) Model: CNC38BR2 Rok produkcji: 2018 Dane techniczne: * Maksymalna średnica rury: 38 x 2 mm * Moc: 22 KM * Zasilanie: 400 V * Waga maszyny: 2500 kg Opis: Giętarka do rur CNC SHUZ TUNG CNC38BR2 w bardzo dobrym stanie technicznym i wizualnym. Maszyna jest wyposażona w system sterowania CNC i jest oferowana z dużym pakietem narzędzi wliczonym w cenę sprzedaży. Nadaje się do gięcia rur stalowych, ze stali nierdzewnej, aluminiowych i innych metali. Maszyna posiada w pełni zamknięty system bezpieczeństwa i automatyczny podajnik rur. Idealna do produkcji rur samochodowych, meblowych, poręczowych, wydechowych i przemysłowych. Rceww Tweza Sw Hs Alsd Laedpszq Dh Rjfx Ancjg Dołączone narzędzia: * Ø8 mm – R17,5 * Ø10 mm – R15 * Ø10 mm – R28 * Ø12 mm – R26 * Ø12 mm – R50 * Ø14 mm – R30 * Ø16 mm – R25 * Ø16 mm – R38 * Ø16 mm – R50 * Ø16 mm – R60 * Ø22 mm – R32 * Ø22 mm – R50 * Ø24/25 mm – R48 * Ø25 mm – R45 * Ø25 mm – R60 * Ø28 mm – R100 * Ø30 mm – R63 * Ø35 mm – R63 * Ø35 mm – R70 Maszynę można obejrzeć na miejscu. Dostępna pomoc przy załadunku. Lokalizacja: Polska. Dodatkowe zdjęcia i filmy dostępne na życzenie.

Condition: used, Year of construction: 2014, Working dimensions: X = 3425 mm, Y = 1287 mm, Z = 325 mm. Max. workpiece height: 180 mm. Max. clearance under the hood: Y = 1450 mm / Bumper version = 1370 mm. Includes CabinetControl Base, 1 machine license, and 1 office license. Milling head 7830, 1-stage, power 6.5 kW, air-cooled, n(max.) 1000 - 18000 min-1, infinitely adjustable. Max. power at 12000 min-1 to 18000 min-1 with HSK-F 63 tool holder, with collet chuck with HSK shank. Drilling unit 7884, 14 spindles, 10 vertical spindles individually accessible, arranged in an L-shape, 6 in the X direction and 4 in the Y direction. Drive power 3 kW, 32 mm pitch. Sawing unit: Integrated sawing unit for sawing/grooving in the X direction, n(max.) 1000 - 5650 min-1, infinitely adjustable. Tool holder: A = max. DM = 125 mm. Location: Supplier. Lsdsy Tpz Repfx Ancsag

Condition: excellent (used), Year of construction: 2002, High-quality copy lathe, woodturning lathe with milling unit, PLC-controlled. A video of the machine in operation can be sent upon request. PLC-controlled wood copy lathe for turning and milling. The machine has two controlled axes: the longitudinal axis and the rotary axis. Input of various feed rates and corresponding lengths for turning, as well as additional divisions and pitches for milling. Several programs for turning and milling operations can be stored. Hydraulic copying of a pattern or template. The roughing and copying tools are equipped with fine adjustments. Template adjustment is possible from the front and rear via fine-pitch spindles. The copying length can be divided into up to 6 sections with different feed rates for turning highly contoured workpieces. Drive motor 400V / 3kW with electric motor brake. Two speed stages adjustable via V-belt, within each stage, operation can be continuously adjusted via a frequency inverter. Speed stage 1: 200 - 2000 rpm Speed stage 2: 350 - 3400 rpm Distance between centers approx. 1550mm Copying length with steady rest approx. 1350mm Bed length approx. 2100mm Feed adjustable continuously, rapid traverse with safety end stop. Hydraulic copying slide with V-turning tool. Spindle with M33 thread and MK3 internal taper. Tailstock MK3 and with quick-release mechanism. Extensive accessories: Ring steady rest with front turning tool and insert guide. Lodpfxszfwm Ne Ancjag Four-jaw steady rest. Four-jaw chuck 125mm. Copying tools, center points, hexagonal drive, etc. Milling unit with 3kW motor for mounting on the copying slide. 5 milling heads available, only the 16mm collet is missing. CE marking Operating manual V-belt new Original paint, only a few spots have been touched up. Very good condition, from a small carpentry workshop. The machine was apparently not used to produce large quantities. Dimensions approx. 2600 x 1300 x 1300mm (L x W x H). Weight approx. 800kg. The machine can be demonstrated on-site upon prior appointment. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this provider."