Used Trumicro 7050 for sale (49)

Condition: good (used), Trumpf TruMicro 6 kW Laser Source High-performance disk laser with nanosecond pulses. The high-performance nanosecond lasers of the TruMicro Series 7000 are based on disk laser technology and combine short pulses and high pulse energies, even at high frequencies. This allows you to remove layers and contaminants at maximum speed and reduce your cycle times. Further optimize your processes by varying the repetition rate – while maintaining a constant pulse duration. The short-pulse lasers of the TruMicro Series 7000 are the ideal tool for the efficient and economical cleaning of tire molds. Large-area applications with high average power Ablation, cleaning, annealing: The lasers of the TruMicro Series 7000 demonstrate their full potential in large-area applications. With pulse energies of up to 100 mJ, they achieve enormous layer removal rates. A scanner ensures excellent power utilization. Flexible laser light cables transport the light to its intended destination and facilitate laser integration. Manufacturer: Trumpf Type: TruMicro 7050 Laser Source Power: 6 kW Cooling: Water System Input Power: 380–460 VAC, 3-phase Laser Power: 750 W Wavelength: 1030 nm Pulse Energy: 80 mJ Pulse Duration: 30 ns Beam Quality: 20 mm Repetition Rate: 5 to 100 kHz Fiber Diameter: 400 µm IP Rating: 54 Bwjdpfx Aksxaktlsnsu Dimensions (W x H x D): 1460 mm x 1350 mm x 730 mm Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping costs available upon request!

Condition: excellent (used), Year of construction: 2015, ENGEL DUO 7050/1000 + Viper 120 RC300 Year: 2015 TECHNICAL DATA: • Clamping force: 1,000 tons Tie bar spacing 1420 × 1170 mm • Injection unit: 7050 • Screw diameter: 105 mm • L/D ratio: 22 • Bimetallic barrel • Control: ENGEL CC300 • ENGEL ecodrive SHV2 servo hydraulics • Power supply: 3×400V + N + PE / 50Hz OPTIONS: • 2× hydraulic core pulls on fixed platen • 4× hydraulic core pulls on moving platen • Total: 6× hydraulic core pulls • Core pulls with locking valves & pressure relief • Euromap 13 • 24-zone hot runner control • Max. hot runner heating capacity: 50 kW • Euromap 14 • 6× hydraulic valve gate control • Centering diameter: 250 mm Bwjdpjzxy Szsfx Aknsu • Through-hole in moving platen: 250 mm • Hydraulic shut-off nozzle • Electric screw drive • Ceramic barrel heaters • Barrel insulation • Interface for dosing/coloring unit • Separate cooling water connection for machine & mold • 20× flow regulators, 0–30 l/min • Mold temperature control circuits up to 95°C / 6 bar • PD-Graphic process monitoring • Ecograph energy consumption monitoring • Ethernet + USB • Process data logging ROBOT: ENGEL Viper 120 RC300 • Max. handling weight: 21 kg • X stroke: 1,200 mm • Y stroke: 1,900 mm • Z stroke: 4,280 mm • A/B/C servo axes, 70 Nm • Automatic central lubrication • Additional vacuum & compressed-air circuits • C70 handheld controller with 7” touchscreen CONVEYOR: ENGEL FB100 • 3,000 × 1,100 mm • Belt speed: 6 m/min • Adjustable height: 1,000–1,200 mm • Safety tunnel • Photoelectric sensor Including safety fencing and integrated robot interface.

Condition: good (used), Year of construction: 2007, Technical Specifications General Information 1. Manufacturer: ENGEL 2. Model: DUO 7050 / 1000 3. Control Unit: CC200 4. Year of Manufacture: 2007 5. Operating Hours: 100,145 h Clamping Unit 1. Clamping Force: 10,000 kN (1,000 tons) 2. Tie Bar Distance (H × V): 1,400 × 1,150 mm 3. Platen Size (H × V): 1,850 × 1,810 mm 4. Mould Height (Min./Max.): 578 – 1,678 mm 5. Opening Stroke: 2,100 mm 6. Daylight (EBH): 1,000 mm 7. Centering (Fixed / Moving Platen): Ø250 mm Clamping Unit Equipment 1. Core Pulls: 2. Fixed Platen: 3 3. Moving Platen: 3 4. Air Valves: 5. Fixed Platen: 1 6. Moving Platen: 1 7. Magnetic Mould Clamping System: Yes Maximum Mould Weight 1. Maximum Total Mould Weight: 21,000 kg 2. Maximum Mould Weight on Moving Platen: 14,000 kg Injection Unit 1. Screw Diameter: 105 mm 2. Shot Volume: 4,160 cm³ 3. Maximum Specific Injection Pressure: 2,090 bar 4. Plasticizing Capacity (PS): 112 g/s Bwsdoy Ukfmepfx Aknju 5. Maximum Screw Speed: 150 rpm 6. Screw Drive: Electric 7. Screw Surface: Armoured and nitrided 8. Barrel: Bimetallic M3 Nozzle 1. Nozzle Orifice Diameter: 8.0 mm 2. Nozzle Radius: R35 mm 3. Nozzle Immersion Depth: 50 mm 4. Maximum Outside Nozzle Diameter: 60 mm KUKA ROBOT 6 axes

Condition: excellent (used), Year of construction: 1999, Engel ES 7050/1000 K Clamping force: 1000 tons Year: 1999 Screw diameter: 105 mm Injection volume: 4160 cm³ Number of heating zones incl. nozzle: 7 Pump drive power: 130 kW Locking force: 1100 tons Opening stroke: 1100 mm Min-max mould height Tie bar spacing: 1400x1150 mm Machine weight: 64 tons + 18 tons Plus Engel Robot Bodpfxsxvc Slj Aknowu Type: ERC 83/2 - CL Year: 1999 Separate control cabinet

Condition: ready for operation (used), Year of construction: 2013, operating hours: 60,244 h, clamping force: 6,500 kN, screw diameter: 105 mm, total width: 2,300 mm, total height: 2,700 mm, overall weight: 20,000 kg, product length (max.): 8,000 mm, This Engel DUO 7050/650 pico was manufactured in 2013. It features a clamping force of 6500 kN, a maximum injection volume of 4160 cm³, and a screw diameter of 105 mm. The machine includes a robot interface (Euromap 67) and is still in production with excellent condition. If you are looking to get high-quality injection molding capabilities, consider the Engel DUO 7050/650 pico machine we have for sale. Contact us for more information about this machine. • Maximum injection volume: 4160 cm³ • Minimum mold height: 450 mm • Maximum mold height: 950 mm • Platen opening stroke: 1400 mm • Platen dimensions (W × L): 1510 × 1440 mm • Tie-bar distance: 1100 × 960 mm • Motor power: 161 kW • Heater power: 73.9 kW • Number of electrical connection pins: 32 • Injection nozzle radius (at tip): R35 • Centering ring diameter: 200 mm • Number of cores: 0 • Number of heating zones: 0 • Year of manufacture: 2013 • Operating hours: approx. 60,244 h Bwjdjx Nr R Hspfx Aknsu • Condition: Excellent • Status: In production Additional equipment • Equipped with robot: Yes • Robot interface: Euromap 67

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: 3.8203, travel distance X-axis: 7,570 mm, travel distance Y-axis: 4,900 mm, travel distance Z-axis: 1,000 mm, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 10 m/min, total length: 18,700 mm, table length: 6,850 mm, table width: 2,250 mm, total width: 8,500 mm, spindle speed (min.): 5 rpm, spindle speed (max.): 2,000 rpm, total height: 7,050 mm, table height: 300 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 10 m/min, distance between stands: 2,750 mm, type of input current: AC, table load: 60,000 kg, workpiece weight (max.): 60,000 kg, distance table to spindle center: 2,500 mm, overall weight: 145,000 kg, spindle motor power: 63,000 W, feed length W-axis: 2,000 mm, MODEL: Portal Type AGE: 1990 S/N #: 3.8203 CATEGORY: Mills, Planer Type, CNC CAPACITY: X-Axis Travel: 7570 mm Y-Axis Head Travel: 4900 mm Z-Axis Ram Stroke: 1000 mm, W-axis traverse movement: 2000 mm Ram Cross Section: 500 mm x 500 mm Distance Between Columns: 2600-2750 mm Distance Table To Ram Face: 2500 mm Table Size: 2x3000+850 mm x 2250 mm, two tables for split or integral operation Spindle (Quill) Diameter: 225 mm Spindle Taper: ISO #50 Spindle Speeds: 0-2000 RPM Spindle Motor: 63 KW EQUIPPED WITH: SIEMENS System 840D CNC Control, new in 2008 CNC biaxial continous milling head Bjdsyl S Ngjpfx Aknowu Right angle Milling Head with Auto Indexing Right Angle Head prolonged with Auto Indexing Straight Milling Head Wagons for Head Change and Tool Pick-up Change Hydrostatic Bearings Coolant System Full Length Chip Conveyors Way Covers 63 KW Spindle Motor Rapid movements: W-2000 mm/min, Z-10.000 mm/min, X and Y-15.000 mm/min Table loads: 30.000 kg+30.000 kg, max 60.000 kg Weight of the machine: 143.000 kg Outside dimensions: 18.700 x 8.500 x 7050 mm

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 06651, travel distance X-axis: 6,800 mm, travel distance Y-axis: 3,700 mm, travel distance Z-axis: 1,500 mm, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 10 m/min, total length: 15,000 mm, total width: 7,500 mm, spindle speed (max.): 4,000 rpm, total height: 7,000 mm, table height: 1,100 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 10 m/min, distance between stands: 3,300 mm, type of input current: three-phase, table load: 50,000 kg, rotational speed (max.): 4,000 rpm, distance table center to spindle nose: 2,110 mm, overall weight: 110,000 kg, spindle motor power: 50,000 W, control cabinet length: 7,000 mm, control cabinet height: 2,000 mm, control cabinet width: 600 mm, Equipment: rotational speed infinitely variable, MODEL: Portal Type AGE: 1992 S/N #: 06651 CATEGORY: Mills, Planer Type, CNC CAPACITY: X-Axis Travel: 6800 mm Y-Axis Head Travel: 3700 mm Z-Axis Ram Stroke: 1500 mm, fixed crossrail Ram Cross Section: 500 mm x 500 mm Distance Between Columns: 3300 mm Bodpoyahv Sefx Aknewu Distance Table To Ram Face: 2110 mm, vertical passage 2000 mm Table Size: 6000 x 2500 mm Spindle (Quill) Diameter: 250 mm Spindle Taper: ISO #50 Spindle Speeds: 0-4000 RPM Spindle Motor: 50 KW EQUIPPED WITH: FIDIA System C20 CNC Control, new in 2002 CNC biaxial continous milling head Universal Milling Head with Auto Indexing Right Angle Head with Auto Indexing Straight Milling Head Wagons for Head Change and Tool Pick-up Change Hydrostatic Bearings Coolant System Full Length Chip Conveyors both side Way Covers Rapid movements: Z-10.000 mm/min, X and Y-15.000 mm/min Table load: max 50.000 kg Weight of the machine: 110.000 kg Outside dimensions: 15.000 x 7.500 x 7050 mm Machine has been tested before dismantling and is fully operational, all mechanical components in excellent condition, electrics new in 2018. Machine available from stock. The price is now SPECIAL FROM STOCK. Once we will reassemble the machine, price will grow significantly. We can assist you to assemble and run up the machine.

Condition: good (used), functionality: fully functional, Year of construction: 2016, operating hours: 7,153 h, load capacity: 5,000 kg, lifting height: 5,080 mm, fuel type: diesel, mast type: triplex, power: 55 kW (74.78 HP), gearing type: automatic, total height: 2,470 mm, Equipment: 3rd hydraulic function, 4th hydraulic function, cabin, lighting, sideshift, trailer coupling, Diesel forklift STILL RX70-50 Year of manufacture: 2016 According to the hour meter: 7,153 hours 5-ton lifting capacity 2.47-meter overall height 5.08-meter lifting height 55 kW Deutz engine - Triplex free-lift mast Bwodpfxoz Hmruo Aknsu - Side shifter - Fork adjustment - Full cabin with heater - Lighting system - Ready for immediate use - Original paint Selling price: €12,900 net Affordable delivery also possible!

Condition: good (used), Year of construction: 2003, pad printing machine, NIR POWER TC 24, year: 2003, Preis: 1.900 Euro, price: Mr. Rainer Eckerle Bweded Ai Hkopfx Akneu

Condition: used, functionality: fully functional, mileage: 183,900 km, fuel type: diesel, fuel: diesel, color: black, driver cabin: day cab, emission class: euro5, number of seats: 3, Year of construction: 2011, Equipment: air conditioning, IVECO EUROCARGO 160E25 6x2 - Year 2011 DIESEL/ Euro 5 Mileage: 183,900 km Automatic transmission/ Engine displacement: 5880 cc/ Power: 185 kW GVW: 160 quintals Payload: 10,050 kg/ Wheelbase: 4,800 mm Accessories: - Air suspension - Stabilizers - Air conditioning Body: - Fixed body, dimensions: 7050 x 2550 x H 1150 mm (floor height) Bwedjy Tycfepfx Akneu

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Working area X: 6800 mm Working area Y: 1840 mm 19.2 kW electrospindle with C-axis, 360-degree interpolating torque Number of vertical drilling heads: 30 Number of horizontal drilling heads X: 6 Number of horizontal drilling heads Y: 4 Blade for grooving in the X direction 8-position turret tool changer 22-position chain tool changer Work table with 10 rows, EPS automatic clamping system Numerical control: BH660 Programming software: BiesseWorks advanced 1 vacuum pump with a capacity of 250 m3/h Bedpfszy Hnrex Aknjwu Chip conveyor belt Safety mats Protective screens Approximate weight: 7050 kg

Condition: excellent (used), CATALOGUE NUMBER 7050 Bwedpfx Ajzrlfmoknju TECHNICAL DATA - wheel diameter: 800mm - table dimensions: 1100x800mm - table angle adjustment - motor: 5.5kW - max. cutting height: 340mm - blade-to-housing distance: 680mm - dust extraction port diameter: 90mm - dimensions (L/W/H): 1500x950x2600mm - weight: 987kg ADVANTAGES – Polish-made – very good condition – used saw Net price: 8900 PLN Net price: 2070 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to fluctuations in the exchange rate)

Condition: used, engines - 55 and 55 kW feed motor - 7.5 kW height adjustment motor - 1.1 kW cutting height - 200 mm cutting width - 350 mm blade saw diameter max.- 300 mm spindle diameter - 2 x 60 mm sleeve diameter - 2 x 70 mm Bwsdpfewrw D Rsx Aknju track width - 350 mm total power - 119 kW electric feed regulation automatic central lubrication minimum length of the element - 600 mm electric height adjustment shaft height adjustment six upper pressure rollers pneumatic clamps five anti-ejection pawls ruler stub diameter - 220 mm spindle speed - 4500 RPM dimensions of the machine (length / width / height) - 275 / 235 / 210 cm weight - ~ 7000 kg Feeders: max. cutting length - 1850 mm min. cutting length - 800 mm max. material length - 2500 mm min. material length - 600 mm max. material width - 700 mm max. material height - 200 mm roll width - 700 mm roll diameter - 130 mm number of rolls - 26 3 smooth pressure rollers 4 toothed pulling rollers feed adjustable on the inverter 0-70 m/min. central lubrication of saw guides power of the saw motor - 2 x 9.2 kW feed motor power - 1.5 kW power of the disc spreading motor - 3 kW chain motor power - 1.1 kW dimensions (length / width / height) - 7050 / 2100 / 1850 mm

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, We offer used SCANNER HS5000 for use on RISO CC3110/3150/7150/9150 4 SETS OF RISO HS-5000 SCANNER IN STOCK. We offer used SCANNER HS4000 for use on RISO CC3010/3050/7050/9050 2 SETS OF RISO HS-4000 SCANNER IN STOCK. WE OFFER PARTS FOR RISO MACHINES ANY TYPE SCANNER PRICE ON THIS ADD IS PER UNIT The set of any scanner is coming with the following configuration: Bwodpjq Npgyjfx Akneu • 1 X Riso HS-5000 or HS-4000 • 1 X STAND (TABLE) • 1 X POWER CABLE • 1 X USB CABLE Condition: This offer contains used devices, which may show signs of use. (Minor scratches or yellowing may apply on the devices). General: - The devices are complete and working well. Tested. - We can ship it worldwide, after secure its systems inside and store it on a 1 euro-size pallet 80cm X 120cm. - For EU countries we can issue zero VAT invoice. Please ask for quotation. - For non EU countries please ask for quotation. For any other information, you also can contact us .

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 8,110 h, load capacity: 5,000 kg, lifting height: 4,330 mm, free lift: 1,320 mm, fuel type: diesel, mast type: triplex, construction height: 2,350 mm, fork carriage width: 1,300 mm, empty load weight: 7,644 kg, total length: 3,100 mm, drive type: Diesel, construction width: 1,500 mm, Diesel forklift Load center: 600 ISO class: FEM 3 A Mast type: Triplex Transmission: Electric drive, AC Technical condition: good Front tire type: Superelastic Front tire size: 2 x 355/50-15 Front tire condition: 60 - 80% Rear tire type: Superelastic Rear tire size: 2 x 250-15 Rear tire condition: 60 - 80% Battery year of manufacture: 2019 Bsdpfsz Hnwrsx Aknowu Double auxiliary hydraulics, cabin with heater, blue spot light, 2 front work lights, 2 rear work lights

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2018, operating hours: 10,208 h, load capacity: 5,000 kg, lifting height: 2,780 mm, fuel type: gas, mast type: telescopic, construction height: 2,250 mm, motor manufacturer: VW, gearing type: other, fork length: 150,602,400 mm, tire condition: 80 %, front tire type: superelastic tires (black), front tire size: 355/50-15, rear tire type: superelastic tires (black), rear tire size: 250-15, overall weight: 7,135 kg, total height: 2,250 mm, total length: 3,200 mm, total width: 1,550 mm, fuel: liquid petroleum gas (LPG), motor model: CHT, Equipment: sideshift, STILL RX 70-50 T-600 /2018 – LPG forklifts TECHNICAL DATA Lifting capacity: 5.000 kg Lifting height: 2.780 mm Closed height: 2.250 mm Mast: Standard (2W278) Fork length: 150.602.400 mm Fork carriage: 3A Drive: 4-Zyl. Treibgas Engine: VW CHT Transmission: elektrisch Tyres: Superelastik SE 355/50-15 (80%) / 250-15 (60%) Service weight: 7.135 kg Length: 3.200 mm Width: 1.550 mm Year of manufacture: 2018 Operating hours: 10.208 h Condition: working condition EQUIPMENT 3rd valve, Rear work lights, Front work lights, Overhead guard cover, Front windscreen ATTACHMENTS Sideshift Bsdpfxsz Ap S Ss Aknewu Rental truck – Rental price on request. Internal no.: 1201898 Location: 14974 Ludwigsfelde bei Berlin Price on request. Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: ready for operation (used), Kardex Shuttle XP systems in stock: - 1 x Kardex Shuttle XP 250, height: 3950 mm - 2 x Kardex paternoster, height: 4000 mm - 1 x Kardex Shuttle XP 250, height: 5050 mm - 1 x Kardex Shuttle XP 500, height: 5980 mm - 1 x Kardex Shuttle XP 500, height: 6050 mm - 1 x Kardex Shuttle XP 250, height: 6450 mm Bwedpfxowgz Rds Aknju - 1 x Kardex Shuttle XP 250, height: 6950 mm - 1 x Kardex Shuttle XP 500, height: 7050 mm - 14 x Kardex Shuttle XP 500, height: 8550 mm - 3 x Kardex Shuttle XP 500, height: 9350 mm Machinehandel De Leeuw BV is one of the few companies in Europe that trades and stocks mainly used Kardex Remstar VLM automatic lift systems (Shuttle systems) and rotating storage systems (paternoster systems). See our website for the current stock. We assemble and/or dismantle these systems safely with VCA-certified technicians and have been doing this for more than 33 years. We also dismantle other brands such as: Hänel, Electrolux, Bertello, Megamat, Lista, and Denocard.

Condition: good (used), power: 0.018 kW (0.02 HP), travel distance X-axis: 2,200 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, overall weight: 15,000 kg, table length: 2,600 mm, table width: 850 mm, spindle speed (max.): 8,000 rpm, Equipment: chip conveyor, CHARACTERISTICS Table; 2600 x 850 mm X-axis travel; 2200 mm Y-axis travel; 800 mm Z-axis travel; 800 mm Spindle RPM; 8,000 Control; Fagor 8055 - MC Motor power; 15/18,5 Kw Magazine tool capacity; 40 Tool; BT 40 Fourth spindle (IRTS splitter); 350 ⌀ mm Electronic handwheel Cooling through the tool Chip extractor Air cooling Bwodpfxor I Aums Aknou Dimensions with extractor (width x length x height); 4029 x 7050 x 3100 Weight; 15,000 kg

Condition: used, mileage: 61,152 km, power: 382 kW (519.37 HP), first registration: 02/2025, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 02/2027, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, Exhaust outlet on the floor, without reversing warning system, LED lighting, mechanically operated lift roof, 2 air horns on the cab roof, 2 rotating beacons, pre-wiring for rear-view camera, ASR (Anti-Slip Regulation), emergency braking assistant, lane departure warning system, without distance warning system, navigation system 7'' + Europe and Russia map, MAN sound system, Rockinger Type 500G, ARK HYVA 20-60S, lifting height 1570 mm, lifting capacity 200 kN, container sizes 4550 - 7050 mm, auxiliary drive connected to the engine, not switchable, fixed PTO. Bedpfx Aezciw Asknewu

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, clamping force: 9,806 kN, screw diameter: 105 mm, displacement volume: 4,160 cm³, opening stroke: 1,100 mm, No reserve price – guaranteed sale to the highest bidder! Engel injection moulding machine with Engel ERC 83/2 - CL robot! Bwedpey Ew Aaofx Aknju TECHNICAL DETAILS Clamping force: 1,000 tons Screw diameter: 105 mm Injection volume: 4,160 cm³ Locking force: 1,100 tons Opening stroke: 1,100 mm Tie bar spacing: 1,400 x 1,150 mm MACHINE DETAILS Number of heating zones: 7 Pump drive power: 130 kW Machine weight: 64 t + 18 t EQUIPMENT Engel ERC 83/2 - CL robot Separate control cabinet Note: For the purchase of multiple items from the same location (see offers below), you will benefit from reduced costs for dismantling and loading.

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 9,270 h, load capacity: 5,000 kg, lifting height: 4,450 mm, fuel type: gas, mast type: duplex, gearing type: automatic, tire condition: 100 %, overall weight: 6,800 kg, total height: 3,050 mm, Equipment: 3rd hydraulic function, 4th hydraulic function, CE marking, cabin, lighting, sideshift, Still RX 70-50 forklift Load capacity: 5000 kg Year of manufacture: 2019 Fuel type: LPG Bedszzwuxopfx Aknewu Heated cabin Lifting height: 4450 m Mast type: Triplex, 3050 mm Side shift Fork length: 1200 mm New front and rear tires Hours: 9270 Forklift has undergone an oil service. UDT certified. Option to install a fork palletizer or a fork positioner. Warranty included.

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 16,500 h, load capacity: 5,000 kg, lifting height: 3,100 mm, fuel type: diesel, mast type: duplex, fork length: 2,400 mm, STILL front loader RX 70-50 forklift truck load capacity 5000 kg offered: FRONTSTAPLER, STAPLER, DIESELSTAPLER, ready to drive Bwjdeu Abl Sjpfx Akneu RX 70-50 4-wheel diesel forklift truck used Year of construction 2020 Here we offer items from various acquisitions, which we describe as well as possible and post informative photos. Further information on the item cannot be provided. Due to time constraints, we can only offer answers to this item if you provide us with a telephone number with your inquiry. Unless expressly stated otherwise, this offer is for second-hand goods. Item is ready to ride with signs of use. Existing defects can be discussed by telephone All offers ex warehouse 47441 Moers. If you require shipping, please contact us to discuss packaging and shipping costs. FRONT LOADER, FORKLIFT, DIESEL FORKLIFT Manufacturer: STILL Type: RX 70-50 Mast: Duplex Load capacity 5000 kg Lifting height 3100 mm Fork positioner Fork length 240 cm, hours: 16500 Fork positioner Full cab Overall height 2460 mm We offer the opportunity to view the item on Tuesday and Thursday between 9 a.m. and 4 p.m. after making an appointment by telephone. If required, the item can be taken away immediately. all dimensions are approximate The following applies to all offers: all information subject to change

Condition: ready for operation (used), functionality: fully functional, operating hours: 15,500 h, load capacity: 5,000 kg, lifting height: 5,100 mm, Equipment: adjustable boom, air conditioning, cabin, head guard, lighting, pallet forks, seat heater, sideshift, trailer coupling, The following is offered: FRONT FORKLIFT, FORKLIFT, DIESEL FORKLIFT, ready to operate RX 70-50 4-wheel diesel forklift Used Year of manufacture: 2021 This offer is intended for commercial customers, dealers, public and church institutions only! Unless explicitly stated otherwise, this is a used item. The machine is in working condition with signs of previous use. Existing defects can be discussed by telephone. FRONT FORKLIFT, FORKLIFT, DIESEL FORKLIFT Manufacturer: STILL Model: RX 70-50 Mast: Triplex Load capacity: 5,000 kg Lifting height: 5,100 mm Fork positioner 2 pairs of forks (4 forks) Fork length: 240 cm Hours: 15,500 Fork positioner Full cab Overall height: 2,460 mm Bwsdpfx Aksw U D I Hsneu Please refer to the photos for data. Further industrial trucks available from stock! Inspection is possible on Tuesdays and Thursdays between 9:00 am and 4:00 pm or by prior telephone arrangement. Subject to prior sale, the item can be taken immediately if required. All dimensions are approximate. General notes for all offers: All information is subject to change.

Year of construction: 2010, condition: like new (used), Used Trumpf Trubend Series 3000 CNC pressbrake for sale VIDEO BELOW: Used Trumpf Trubend 3120 for sale 3metre x 120ton 6 axis plus pressbrake for sale. Brand/make: TRUMPF Model: TRUBEND 3120 Type: CNC hydraulic Press Brakes New 2010 Location: United kingdom Low hours – 14,000 Specification Convert Specs to Imperial Tonnage 119.749 t / 120ton Type: hydraulic downstroke Overall Length 3.1 m /3metre BH 2.7 m Stroke 199.9 mm Number of axis: 7 axis 5 axis back gauge Weight 18298 (LBS) Control CNC (T3000) 132 Ton X 10′ Trumpf TruBend 3120 CNC Press Brake Year: 2010 Specification from new: Machine – Stable machine frame as welded all-steel construction – Ram, highly resistant to torsional forces – Spherical ram suspension, with ram tilt – Electro-hydraulic downstroking drive with 4-cylinder technology – Proportional valve technology Bwedpfx Aehtm Ikekneu – Modern block hydraulics – Electronic pressure balance – Measuring system with glass scale and frame deflection compensation – Hydraulic oil filled in the machine (lifetime lubrication) – Oil cooler Backgauge System – Backgauge system 2-axes with rack and pinion-drive for X- and R-axis, – 2 pieces back gauge fingers with safe adjustment in front of the machine Tool Holder – TRUMPF Upper tool clamping, manual and hardened – Lower tool clamping, manual and hardened Crowning – Self-regulating crowning system – Additional hydraulic CNC-crowning Control – Machine control: T3000 colour, DELEM based on Real Time for Windows – USB interfaces for keyboard, mouse, etc. Safety – Footswitch for Emergency up, down and emergency stop – Safety equipment: Side doors and manual shutter roller at the rear Services – Installation, start-up and instruction Options for Backgauge System – Back gauge system 5 axis Options for Tool Holder – Amada US Style fast clamping of upper tool holders (segmented, on entire working length) Options for Safety Device – BendGuard Options for Material Handling – Support bracket (2 pc) Delivery – June 2011 Video below: Used Trumpf V and C series cnc pressbrakes also available in stock for sale. We are always interested in buying used Trumpf pressbrakes and machines such as: TruBend 3066 TruBend 3100 TruBend 3170 TruBend Series 5000 TruBend 5085 Trubend 5130 TruBend Series 7000 TruBend 7050 TruBend 7036 TruBend 7050 TruBend Series 8000 TruBend 8230 Trubend 8400

Condition: used, functionality: fully functional, Year of construction: 2010, load capacity: 5,000 kg, lifting height: 3,480 mm, fuel type: gas, mast type: telescopic, construction height: 2,550 mm, fork carriage width: 1,300 mm, fork length: 1,200 mm, empty load weight: 6,615 kg, drive type: Treibgas, Internal combustion forklift Load center: 500 ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Telescopic Bwjdpfx Akey Tz Aysnou Transmission: Electromechanical Condition: Ready for use and fully functional Technical condition: very good Front tire type: Superelastic Front tire size: 355/45-15 Rear tire type: Superelastic Rear tire size: 250-15 Description: In addition to this unit, we offer other forklifts and warehouse equipment. Our equipment is workshop-checked and FEM4.004 certified. Please contact us by email or by phone. You can also find us at hsr-gabelstapler. Of course, we also buy your used equipment, even if you do not purchase a vehicle from us. Lease purchase and financing at favorable terms are available upon request. We will be happy to provide you with competent and detailed advice on our vehicles. 3rd valve, rear work light, front work light, roof protection, interior mirror, joystick, rotating beacon, single-pedal operation, LED, seat.