* General * SKU356S849 * LocationBarneveld * What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. You are welcome to inspect our machines in Barneveld, The Netherlands. Visit our website Foeth for more information and many more machines!
Xobpzkax
5
Conveyor belt, belt conveyor, conveyor belt, belt conveyor
Lh99d
-Drive gear motor: 0.25 kW
-Speed gear motor: 4.8 rpm
-Drum diameter: 100 mm
-Belt width: 300 mm
-Belt height: 480 mm
-Conveying length: 800 mm
-Belt speed: 1.5 m/min
-Dimensions: 650/1000/H700 mm
-Weight: 160 kg
15
Linck E 28 / 28 BV for sale as a spare parts carrier.
Jxx2i3
Creel was after overhaul only 7 years in use.
Steel swing with removable flywheels.
Frame width 710 x 710 mm stroke 600 mm. Fully hydraulic.
With creel stand complete, flywheel, stilts, base plate
and feed gear. Accessories.
4
Hainbuch Centrex zero point clamping system
4 base plates with 17 pallets.
Original description attached.
Qj7zr
High precision pallet system for fast and accurate setup of the machine tool.
Available immediately.
Due to the acquisition of automation, the system is no longer needed.
Technical data:
Control: Sinumerik 840 D mmc103 from Bj.09
tool holder: SK 40
Cabeggqoxy
main spindle belt driven 9000 min/1/general overhauled
traverse x 1500 mm / Y 400 mm/ Z400 mm
tool places 20
Equipment:
External cooling, hinged belt chip conveyor, working
working area partition, pendulum operation, electr. handwheel, rinsing pistols
Clamping surface/table length: X1900 mm Y 420 mm Table-
load 500 kg.
Total connection requirement: 20 kVA
1
Pressing force 400 t, 2 main cylinders, stroke length 800 mm, working area 3000 x 1300 mm, working height 800 mm
Idprqj3yc
2
wing coulter 3m with roller
B9hsmzanxw
8
ABB milling robot in carat milling cell BK-FOT Rollo. Divece is in good condition. milling is possible up to 5-axis. CNC.
Manual available.
Pzqrn
EXW. Pick up only
7
EMAG VERTICAL SINGLE SPINDLE ROTARY CENTER VL 4 (Fanuc)
with turning station for machining OP10 and OP20
Including exhaust air system and tool monitoring.
One machine with tool drive.
MAIN SPINDLE 18 KW
Spindle unit with motor spindle, incl. amplifier (mounted in control cabinet)
The motor spindle is a highly dynamic speed and position controlled maintenance-free
asynchronous spindle motor.
Special features:
- High rigidity of the spindle due to short bearing distances, precision shoulder bearin...
3
For sale is a compressor unit Aircenter SM12 from Kaeser from 2013.
Latest Sigma 2 control.
Catbgvyugp
Operating hours 8,990 and load run 4,780 hours.
Last maintenance 03/2022.
During maintenance the ground connection was exchanged.
The second unit from 2007 is a separate offer.
15
CNC moving column milling machine
Machine type: CB 70
Year of manufacture: 2000
All axes are equipped with glass scales
Machine hours
Control On: 15998
Machine On: 13946
Spindle running time: 5943
Control type: Heidenhain TNC 430
Tool holder: SK40 DIN69871
Main spindle: Celox motor spindle 15.000min/-1 (reconditioned, as good as new)
Travels
X 2100mm
Y 720mm
Z 600mm
P8zhr
Tool places: 30
Equipment: external cooling, scraper belt chip conveyor, work area partition, pendulum operation, workpie...
6
cutting lenght 2550 mm
Dwdsp3
norm steel 420 N / mm2 10 - 13 mm
stainless steel 8 mm
stroke max. 33 1 / min.
cutting angle 0,5-3 °
oil tank 310 l
power main motor 29 kW
Cybelec Cybtouch 6 control
sheet Support
stable support arms
modification of cutting angle
table with plastic brushes and balls
4
Technische Daten:
- Verfahrbereich X - Achse 900 mm
- Verfahrbereich Y - Achse 1300 mm
- Verfahrbereich Z - Achse 180 mm
- max. Werkstückabmessungen 2500 x 900 x 60 mm
- min. Werkstückabmessungen 280 x 75 x 10 mm
- Verfahrsystem (X & Y Achse) Zahnstangen-Ritzelantrieb
- Verfahrsystem (Z Achse) Kugelrollspindel
- Verfahrmotoren AC Servo Motoren Delta / YASKAWA
- Luftkissentisch für leichte Bewegung und Schonung der Werkstückoberfläche
- Frässpindel luftgekühlt 5,5 kw
- Spindel Drehzahl stufenlo...
6
3D printer Stratasys OBJET30 Prime
Device is in very good condition, low wh. Small signs of paint damage that do not affect print quality. See attached pictures.
Dimensions: 82.5 x 62 x 59 cm
Weight: about 110 kg
User manual available.
T8ydznij
Pickup only.
EXW. Device is ready for collection.
3
for sale is a compressor unit Aircenter SM12 from Kaeser from 2007.
Regularly maintained.
Catbbkdo77
The refrigeration dryer has a defect, which should be able to fix an air conditioning technician.
2
Vertical turning device, used
consisting of 2 drive units
Make Fabricom
year of construction: 2006
Mobile ( not under load )
Motorized height adjustment 665-1650 mm (center plate)
Speed height adjustment 45 sec/1000 mm
Rotation speed plate +/- 180 degrees
Power supply 400 V / 16 A
Operation Manual
Cq3huwxm
5
Max. Cutting force 220 kN
connected load 29 kVA
Compressed air connection 7-14 bar
working area X+Y without setting back 2500 x 1250 mm
traversing range X -50 - +2550 mm
traversing range Y -7 - 1280 mm
max. sheet thickness 8 mm
active downholder power programmable in steps 4,5-20 kN
Ibtotvq
Max. Workpiece weight 200 kg
max. speed X-Axis 100 m/min
max. speed Y-axis 60 m/min
max. speed C-axis 330 rpm
simultaneous X+Y m/min
stroke sequence punching E-1 1200 1/min
stroke sequence signing 2800 1/min
...
6
Machine control:
Heindenhain iTNC530
The technical data at a glance:
Clamping table: 1200 x 610mm
Qdqwd
travels:
X-axis: 1020mm
Y-axis: 620mm
Z-axis: 610mm
including 4th axis on the table - partial aperture dismountable
including exhaustion of working area
inclusive Heidenhain workpiece probe
speed range: 1-8000 min-1
tool places: 32
IKZ with 20bar
bed flushing
internal coolant tank approx. 400L
unit weights up to 800 kg
condition:
used - very good, regular maintenance performed
current hourly ...
6
Vertical turning device, used
B8u2t9d80r
Make: Seroma
year of construction: 2009
1 x drive + 1 x follower unit
Capacity 5000 kg / set
Fixed on the floor
Motorized height adjustment 2 min/1450 mm
Rotation speed plate 45 sec/360 degrees
Rotation angle plate 360 degrees
Power supply 400 V / 16 A
Manual operation
5
Slag Grinding machine with 2 sanding belt units and an oscillating wire brush. The system is optimally suited for the processing of flame cutting / plasma parts. The machine was little used and is in very good condition
1. Station sanding belt unit, roll diameter 180 mm, 90 ° Shore, for rough burr removal
2. Station sanding belt unit, roll diameter 280 mm, flexible 45 ° Shore, for the surface machining and edge rounding
3. Station, wire brush roller oscillating with 280 mm diameter, can be used...
6
material length 3000 mm, material thickness 6 mm, mototorized backgauge, manual blade gap adjustment, extra blades
B8xchjfzlo
5
pressing force 125 t, material length 3000
new punch
Lbcatcq
8
working area 1530 x 3050 mm, power 6 kW, Fiber laser
power on time: 1535 h
Bgswv3xs22
cutting time: 331
6
plate thickness 6 mm, plate length 6000 mm, free passage 6050,
Brf9qd3ybj
throat depth 100 mm, control ELGO P8721m motorized back gauge, 4 support arms, sheet support system
5
pressing force 135 t, material length 4100 mm, stroke 120 mm, daylight 3150 mm, securiy device, back gauge, Service panel at rotary arm
Bceop9s
new seals on stroke cylinder, hydraulic hoses, springs in valves and tool holders
5
max punching power 220 kN
y-axis 1500 mm, stroke x-axis 2500 mm
B3pija7930
machine available approx. on january 2023
bending length 3050, pressing force 100 t
installation height 590 mm
C8m3idey
Wila Premium clamping top and bottom, incl. tools
Control Delem DA 66 T
Fiessler Akas 3P Laser finger protection motorized
back gauge Dener X,R,Z1,Z2 axis
5
Material length max. 1540 mm
Material thickness max. 4.0 mm
Weight 840 kg
Power 1.1 kw
Upper roller 110 mm
Underroller 110 mm
Machine measurements (length 2400 mm, width 570 mm, height 1100 mm)
Series accessories:
Brake engine and emergency stop wire
Frequency converter for cruise control bending feed
Bombted reels in stable needle bearings
Top and underroller delivery by hand wheel
Top and bottom roller drive motor by snail gearbox
Complete drive on one side resulting in compact design
Elect. ...
5
Working area: 6050 x 2040 mm
Laser power: 6 KW
Resonator manufacturer: Fanuc
CNC control: Fanuc 31i-LB
Stable machine frame with integrated laser unit
Automatic pallet changer
Drives: Fanuc Servo
Cutting head: Precitec ProCutter with automatic focusing
Bevpizervf
Multi-chamber extraction system
Automatic sheet recognition and measurement
Real-time nesting
Flycut
Semi-automatic separation cut
Automatic nozzle cleaner
Re-entry function after program abort
Bcbpguhfvq
Process monitoring by four inte...
4
material length 3020 mm, pressing force 220 t, daylight 600 mm, throat depth 450 mm
2tmwku
1
material length 3000 mm, pressing force 175 t, daylight 600 mm, throat depth 450 mm, with DELEM 66 T control, X-R axis with servomotors
Qezpd
5
cutting length 3120 mm, sheet thickness 6 mm
Bepdt7fcn0
NC control MAPER, manual central cutting gap adjustment via handwheel, adjustment of cutting length via control panel, balls in table, cutting line recognition via silhouette
Working area: 3050 x 1530 mm
Laser power: 4 KW
Resonator manufacturer: Fanuc
CNC control: Fanuc 31i-LB
Stable machine frame with integrated laser unit
Automatic pallet changer
Drives: Fanuc Servo
Bevpfzyzm2
Cutting head: Precitec ProCutter with automatic focusing
Multi-chamber extraction system
Automatic sheet recognition and measurement
Real-time nesting
Flycut
Semi-automatic separation cut
Automatic nozzle cleaner
Re-entry function after program abort
Bcbpguhfvq
Process monitoring by four inte...
5
Working area: 3050 x 1530 mm
Laser power: 6 KW
Resonator manufacturer: Fanuc
CNC control: Fanuc 31i-LB
Stable machine frame with integrated laser unit
Automatic pallet changer
Drives: Fanuc Servo
Cutting head: Precitec ProCutter with automatic focusing
Multi-chamber extraction system
Automatic sheet recognition and measurement
Real-time nesting
Flycut
Semi-automatic separation cut
Automatic nozzle cleaner
Re-entry function after program abort
Bcbpguhfvq
Gvu7iw
Process monitoring by four integrat...
5
Working area: 4050 x 2040 mm
Jvavra
Laser power: 4 KW
Resonator manufacturer: Fanuc
CNC control: Fanuc 31i-LB
Stable machine frame with integrated laser unit
Automatic pallet changer
Drives: Fanuc Servo
Cutting head: Precitec ProCutter with automatic focusing
Multi-chamber extraction system
Automatic sheet recognition and measurement
Real-time nesting
Flycut
Semi-automatic separation cut
Automatic nozzle cleaner
Re-entry function after program abort
Bcbpguhfvq
Process monitoring by four integrat...
Used Alois kober
Search Machineseeker now with more than 200,000 used machines:This may be of interest to you
Photo gallery: The World's 10 biggest excavators
Machineseeker still biggest sponsors of 2nd German football league
Olympic Games: Machineseeker sponsors Team Germany
Sell now on Machineseeker! Over 250,000 inquiries per month
Morlock Motors official partner of Machineseeker and Truckscout24
Photo gallery: the 10 strongest forklift trucks in the world
