Fecken kirfel aachen germany for sale
Identified location: Ashburn (US) (Edit)
|
3
1989
good (used)
Automatic vertical foam cutting machine V41
- Cutting height 1400mm
- Cutting lenght = 2500 mm
- Table width left and right of the knife = 2150 mm
Fofl72ute
- Air cushion system
- Second tilting fence on the left side
- Motorized grinding stones incl. dust exhaust system
- year producion 1989
- good condition more
|
|
5
1973
used
Univ. tool room milling machine MACMON (Germany) type M 100
Fabr. No. 1267 built in 1973
Routes x 310 mm, Y: 170 mm Z: 340 mm
Table size 600 x 215 mm
Spindle retainer for SK 40 - M16
Horizontal spindle speed 40-2000 RPM 16 levels
Vertical spindle speed 50-2500 RPM 16 levels
Feed 9-450 mm / min. 16 levels
Pinolverschiebung 60 mm on the vertical head
Motor output 1,5 kW
Power supply 380 v, 50 Hz
-automatic feed in X and Z axis
-2-axis digital MITUTOYO for X and Y
-fixed angle table
-Coolant system... more
|
|
5
CNC LATHE
Make NILES- SIMMONS (GERMANY), type N 22, year of manufacture 1993,
Control SIEMENS SINUMERIK 840 C,
Swing diameter 520 mm, turning length 630 mm,
Rotary spindle bore 150 mm,
Weight 7000 kg,
Documentation, chip conveyor
Bhhw8drgxs more
|
|
2
Make AMK Peter Küpper Aachen, Type Bauart III-U, No 12438, New 1990, Material Stainless steel 1.4571 (316Ti), Test pressure jacket (Bar) 5.2, Working pressure jacket (Bar) 3, Z-blade mixer (1x), Capacity 1,0 Ltr (useful), Trough sizes 100x160mm, With cover , With jacket (0,5 Ltr), Max. temperature 300 Degr. C., Motor 1,1 KW, 290/500 Volt, Manual operated tilting , With switch , Floorspace 1,4x0,9 M, Total height 1,5 M What you can expect from Foeth: all our machines are in working condition, and... more
|
|
3
AC700 F Fine Grinder with 12,0 KW drives in six process loads.
Bhhzfulm9c
Max. 1000 daN process force. Max speed 160 rpm. Grinding oil vial pneumatic valve. Size controller to controll the load steps and final. Documentation in paper form- This machine is on stock. more
|
|
3
1989
excellent (used)
Renovated chain conveyor Bezner.
Nvdsh
Length - with motor 5.10 m / Without motor 4.10 m
Width - 2.35 m
Height - 2.20 m
Motor power - 5 Kw more
|
|
13
2004
good condition (used)
CNC Machining center CHIRON FZ 18 W high speed 5 axis - 2 pieces
Manufacturer: Germany 2004
PRICE TOGETHER 28000,-EUR (one piece functional, second piece for spare parts)
Condition: stored, not connected, fully functional before disconnection.
There are two machines for sale together, they were imported into production, but were not installed. They are ready for transport. Purchased as used from Switzerland, now an extinct company. The interest is to sell both machines together.
When unloading,... more
|
|
5
100 t INJECTION CASTING MACHINE for thermoplastics and thermosets, manufactured by MANNESMANN DEMAG GERMANY, type ergo tech 100 - 310 compact, year 1995, screw diameter 40 mm, clamping force 100 t, opening stroke max. 500 mm, mould clamping plates 580 x 590 mm, ejector force 41.2 KN, weight 4200 kg, IN THE YEAR 2015 PUMP RENEWED.documentation, software
Qgbvgtgj more
|
|
2
Make AMK Peter Küpper Aachen, Type VIU-20 / IV Extrusion kneader, No 12606, New 1997, Material Stainless steel 1.4408, Stainless steel 1.4571 (316Ti), Vacuum possible , Test pressure jacket (Bar) 5.2, Working pressure jacket (Bar) 3, Working pressure (Bar) 0, Z-blade mixer "Mixtruder" (1x), Capacity 32 Ltr, Useful capacity 20 Ltr, Trough sizes 340x340x350mm, With cover , With jacket (7,2 Ltr), With electric heating (HTT oil heating unit, type CPS 04-1-8-1), Max. temperature 250 Degr. C., With ad... more
|
|
4
1987
good (used)
the band saw with feeder is a product from the german producer CANALI which has the produtions unit at Speyer.
Bg3u0vop2m
the machine is ready for working and it is just ready for loading on your truck more
|
|
1
2018
as good as new (ex-display)
Machine is in the exhibition. Optiturn Premium CNC lathe directly from the manufacturer.
S600 - The OPTIMUM Premium CNC milling machine with Siemens control SINUMERIK 828D Basic is characterized by power, speed, precision and long service life.
Heavy execution
Compact design
Inclined bed design 30° for particularly large machining diameters
Easy chip discharge into the chip tray
Dimensionally stable linear guides ensure a long service life through maximum static and dynamic r... more
|
|
8
RÖSLER Shot Blasting 1600 x 500
- Make : Rösler Germany
- Typ : RRB 16/5
- Serial : WO 1576
- YOP : 2008
- Max. width : 1.600
- Max. height : 500
- Minimum product length : 2.300
- Minimum thickness : 6
- Workpiece weight Kg : 1.250
- Working speed M/min : 0,5–3
- In feeding height : 800
- 4 blasting turbines
- Power 11 kW
- Speed 100 M/sec
- Roller conveyor feeding in
- Roller conveyor feeding out
- Filtration System ROSER RF 75/9 P/w
Bgs9i9e2uw
Capacity 75... more
|
|
7
1997
defective spare-parts repository (used)
SPARE PART MACHINE - power supply was removed
Ref.-Nr. 00497
Description NC – lathe
Hersteller Heyligenstaedt
Model Heynumat 5 UK / 800
Year of made 1997
Control Siemens 840C
Turning length 800 mm
tailstock
Quill diameter 100mm
Quill 140mm
ZMD = tailstock end adjustment 1111mm
Z1FD 93mm
machine sizes TWS right
Max. Circulation diameter over bed (in front of the TWS disks) 640mm
Max. Circulation diameter over bed sled 450mm
Bcpwiutweo
Max. Turning diameter 330mm
Max. Resonant circuit... more
|
|
5
110 t INJECTION CASTING MACHINE for thermoplastic and thermoset MANNESMANN DEMAG GERMANY, type ergo tech 110 - 310 compact, year of construction 1998, screw diameter 40 mm, clamping force 110 t, opening stroke max. 600 mm, mould clamping plates 670 x 670 mm, ejector force 41.2 KN, weight 5500 kg, documentation, software
Be3k3yurod more
|
|
2
Make AMK Aachener Misch- und Knetmaschinen- Fabrik, Type MIXTRUDER VI U-450, No 12284, New 1987, Material Stainless steel, Vacuum possible , Working pressure (Bar) 3, Z-blade mixer "Extrusie-kneder", Capacity 450ltr (netto), With cover , With jacket (17+16+10.5+8.5+9+10+12 Ltr), Max. temperature 250 [...] Single geared , Motor 30 KW, 380/660 Volt (ex), Screw discharge , Motor +/- 15 KW, With switch , Floorspace 4,2x2,2 M, Total height 3,0 M, Weight 8500 KG, Extra Specifications - This AMK Aachen... more
|
|
4
1988
good (used)
Pillar drilling machine
ALZMETAL AX 2
No. 1393 Year of construction: 1988
Drill table is height adjustable via hand crank,
V-belt drive clamping adjustable via hand lever, pole-reversible motor with 2 stages
Tech data approx.
Drilling capacity in steel: 23 mm
Spindle mount: MK 2 Pinole diameter 35 mm
Feed: manually
Speed range: stepped discs 5 stages
ten speeds - 400-5000 rpm (engine 2 speeds)
Drilling stroke: 95 mm with scale indication and clamping
Projection: 250 mm
Bhmzkcyoq
Table siz... more
|
|
1
2014
good (used)
Tool milling machines with digital 3-axis position display DPA 2000
Machine is in the exhibition.
Technical data
Electrical connection
Connection 400 V / 3 Ph ~50 Hz
Total connected load 6 kW
Motor feed 1,1 kW
Motor rapid traverse 0,75 kW
Drilling-milling performance
Drilling capacity steel (S235JR) 32 mm
Continuous drilling capacity steel (S235JR 28 mm
Vertical spindle
Drive motor 3 kW
Stem mounting ISO 40 DIN 2080
Spindle speeds 40 - 2,000 min-1
Gear stages 18 stages
Distance spindle - cross t... more
|
|
12
1989
ready for operation (used)
RABBA Guillotine 1250 x 16 mm
- Make : RABBA
- Type : HS 16 / 1250
- Serial No : 65
- YOP : 1989
- Cutting length : 1.280
- Cap Steel 37 : 16
- Cap stainless : 12
- Blade length : 1.300
- Size blade : 60 x 25
Ptxfn3
- Down holders : 7 pieces
- Cutting anlge : 0 – 3 Gr.
- Number strokes : 12
- Angle cutting : 2 – 3 Gr
- Number off downholders : 9
- Positioning speed X : 30
- Dimensions
- Length : 2.100
- Width : 1.400
- Height : 2.000
- Weight : 3.900
- Powe... more
|
|
4
Stock - No.:2276
1 used, partly overhauled and functionally tested granulator
Manufacturer: RAPID Germany
Type: 3026 – K
Rotor width: 300 mm x Ø 260 mm
Vertical cut with 3 Rotor knifes – 2 Stator knifes
Sieve/screen – Ø 8 mm
200v8v
Motor 11 kW
Noise protecting cabin, easy opening for maintenance and cleaning
incl. integrated regrind material suction-blower.
More granulators / shredders ex stsock Wuppertal -Germany available.
Ask for our most recent stock-list or visi us. You´re welcome.
... more
|
|
3
Powertransformer Made in Germany by Trafo-Union (SIEMENS) in very good condition. All oil checks available. Removed from normal operation in favour of capacity increasing. Transformer is ready to dispatch within short time. We are happy also to assist with transport and customs support for shipping world wide. Would cost new appx. 135.000,00 with a lead time of 6 months. The offered transformer has a officially stated estimated life expectancy of remaining 37% which would result in appx. 20-25ye... more
|
|
5
For sale is:Gas powered forging chamber furnace, as good as new type: GKO - 85/60/150-360Year of construction: 2010Fabr./make: SIMPLON Aue GermanyNumber of burners/ number burner: 4 Temperature range/ range of temperature: 750 .... 1200°Cinterior/interior space: 1090 x 1500 x 710 mm (WxLxH)Connected load/ power consumption: 360 kW ( gas )Connected load electrical / electr.power: 7,5 kWweight / weight: 10,4 t Specification: 4 x fan burner / 4 x blowpipe burner
Nprzz more
|
|
1
2018
as good as new (ex-display)
Optiturn L28 HS CNC lathe directly from the manufacturer.
L28 HS - The OPTIMUM CNC lathe with Siemens control SINUMERIK 808D Advanced PPU 150.
Cast iron strutted machine bed
- Complex spindle bearing
- Emergency stop pushbutton
- Central lubrication
- Reference switch
- Maintenance-friendly protective enclosure
- Rear access flap for maintenance
- Safety switch on the front sliding door
- Turret is located behind the turning center (left-hand turning tool)
- Linear guide
- Software package "SINU... more
|
|
13
1990
ready for operation (used)
|
|
7
Zinc Dust Production plant producing zinc dust from recycled zinc
Throughput 10 tons per day
Final product zinc dust according to ISO 3549
Betnlvtkua more
|
|
4
vacuum drying oven
Inside: 700 x 700 x 600mm deep
Heating capacity: 3 KW
Temperature range 1-120°C
Outer dimensions: 1280 x 950 x 1280
Pressure range: Atmosphere - 0 Bar (Not suitable for overpressure)
A suitable vacuum pump is provided depending on the application.
Supply line: 3ph , N, PE 400V, 50Hz CEE plug
The interior installation can of course be completely removed!
K2e8er02 more
|
|
This GAS textile dryer is excellently suited for the
Bg0v3bcaie
highest production capacity requirements.
Its highlights are the high volume of air circulation,
its temperature accuracy and efficiency,
And with the double belt option makes it one of the best
in textile drying market.
It is suitable for drying water based and plastizol inks as well as flock adhesives and pigment Digital printing inks.
Specifications:
Dryer Type: DLT-G-17-HH-HS-DB
Serial Number: 21600347
2 Double... more
|
|
Schecht engine shear SMT / NC 200
Year of construction: 1998 No.MT 5762
Power: 2040 x 2.5 mm steel 400 / N / mm² aluminum: 2040 x 4.00 mm 250 N / mm²
VA 2014 x 1.5 mm 600 / N / mm²
Top used condition with a lot of equipment:
(cut thin sheet only)
Motor backgauge 750 mm
NC control 99 program memory, 6 steps each
Quantity shutdown + foot switch
controlled tilting table (sheet holding device)
pneumatically controlled - unloading to the front
Angle stop extension up to 2 m on the left wit... more
|
|
1
2018
as good as new (ex-display)
Machine is in the exhibition. M1050 Premium CNC milling machine directly from the manufacturer.
M1050 - The premium CNC milling machine with Fanuc 0IMF control is characterized by power, speed, precision and long life.
Heavy execution
High productivity
Linear guides for high rapid traverse speeds in all axes
30-fold magazine tool changer (double arm gripper)
High reliability
Castings made of quality Meehanite cast iron
Cross table precision ground with 4 T-slots
Heavily ribbed, torsion-free mac... more
|
|
15
1995
ready for operation (used)
|
|
3
Format 5, Teabagsize 64x44mm
String and Tag
Cartoningunit
H00unasr
direct from Produktionline more
|
|
1
WIRE WREELING MACHINE (for example for the production of electric motors)Make STATOMAT BALZER
By8hs8ns more
|
|
5
Manufacturer
KONRAD RUMP (GERMANY)
Model
Bfl7enmd77
20-W-2100-6-E
Year
2012
No. Series
9332046
Observations
Component dimension: Maximum length of metal sheet: 2.100 mm; Maximum length of metal profile: 1.800 mm; shotblasting wheel: 6; dust removal performance: 12.000-15.000; Voltage 400V / 50Hz; Dimensions (W,L,H); transport table length: W: 7500 mm, L: 8600 mm, H: 7600 mm; Installed engine power: 133 kW. Incl. equipment for the filter suction. Total working hours machine: 4.800h; total hours f... more
|
|
15
we bid:
Conveyor belt conveyor RK-100 approx. 180x40cm H=135(210)cm on 2 stands with fixed on pallet, belt is functional.
Manufacturer: Rhein-Nadel Automation Aachen
Type: RK- 100
Product No. 142083
Year of construction: ?
Dimensions tape: 40x 210 x 135 cm
Dimensions: 46 x 230 x 210 cm
Height: ca.210 cm with cladding
Angle: no only durcj´h Conversion
Belt speed: 1 m/min
mobile: on pallet
Connection: 220V 50 Hz Plug 380V
Engine: OCG 632, 220 V 180 W, 2780 1/min,
Gearbox: GF24-129
Weight approx.... more
|
|
1
2018
as good as new (ex-display)
Machine is in the exhibition. M760 Premium CNC milling machine directly from the manufacturer.
M760 - The premium CNC milling machine with Fanuc 0IMF control is characterized by power, speed, precision and long life.
Heavy execution
High productivity
Linear guides for high rapid traverse speeds in all axes
24-fold magazine tool changer (double arm gripper)
High reliability
Castings made of quality Meehanite cast iron
Cross table precision ground with 4 T-slots
Heavily ribbed, torsion-free machi... more
|
|
15
|
|
Make: Zahoransky / Germany
Type: PB14
Year: 2004 (8.200 operating hours only)
Foils: 200 – 600 µm PVC/PET/PET-GAG
Seal Size: 294 x 320 mm, draw depth 60 mm
Pathes: max. 8 pc.
Speed: max. 15 tacts per minute
H8kzrxv
Stations: ■ deep-draw station
■ manual product filling
■ seal and cutting station
■ cooling
■ automatic card inserter
Air Pressure: 6 bar
Power Supply: 13 kW / 400 V / 50 Hz / 21.3 Amp
Condition: EXCELLENT – with manufacturer’s CE certification
■ including ... more
|
|
6
Heating/Cooling Mixer Combination
Manufacturer: MTI
Year of construction: 1991
Typical batch size: 100 Liter / 6-8 batches/h
Max. capacity: approx. 600 – 800 kg/h for PVC-U
Condition: used, as inspected
Heating Mixer:
Type: M 200
Year of construction: 1991
Serial-No.: 856
Vessel volume: approx. 200 Liter
Nooqx
Drive capacity: 75 kW
Cooling Mixer:
Type: K 800
Year of construction: 1991
Vessel volume: approx. 800 Liter
Drive capacity: 15 kW
Remark: The mixer combination is still connected ... more
|
|
6
UNION ROTARY TABLE
TABLE SIZE: 1800x2000mm
TBALE LOAD CAPAICTY: 12.5-15t
K3ks9
X Axis. 1250mm
Indexing. 4x90° Optic
Weight of Table. 10t
Condition. Excellent, Under Power can be Inspected at any time
Location. Germany
Delivery. Immediately more
|
|
6
good (used)
|
|
2
2019
as good as new (ex-display)
Machine is in the exhibition. Axile G6 5 - Axes Simultaneous Machining Center Standard/Compact direct from the manufacturer.
The Axile G6 Premium CNC milling machine with Heidenhain TNC 640 control panel is characterized by power, speed, precision and long life.
Design as standard version
-- Heavy execution
-- High productivity
-- Perfect U-shaped closed guide design
-- spindle movement by 3 linear axes
-- Rotary & tilting table drive by built-in oil-cooled motors with high torque
-- Double symm... more
|
|
1
The line consist of following operations and units:
- Unreeling with break,
- Pull through unit,
- Degreasing,
- Slurry brush graining,
- Pre-after rinsing,
- Blow drying,
- Tensioning / curling unit,
- Hydraulic cutting,
- Reception belt
- Electric control panels.
Process : Slurry brush graining
Material : Aluminium strip
Beujuywiw7
Strip width 600 – 1050 mm
Strip thickness 0,09 – 0,3 mm
Line speed : 5 – 8 m/min.
Surface-graining: Ra-Value = 0,5 – 0,90 µm
Cut size : var... more
|
|
12
Roland 304 P 1999 70 Mio PPL Rolandmatic RCI Perfecting 2 + 2 Washers In production
Bfwlpya8d0 more
|
|
The wrapping unit and chain conveyor are located downstream of the bale ramp. The bale is picked up by the chain conveyor carriers and conveyed into the wrapping unit. The chain conveyor is 6 m long and hydraulically driven. Following wrapping, the bale is deposited and conveyed by the chain conveyor to the bale discharge system. The standard bale discharge system consists of a 6 m long electrically powered roller conveyor. The bale is removed by a forklift (with bale forks) at the end of the ro... more
|
|
8
Cube cutter / bacon cutter / multi-purpose cutter
Manufacturer Holac Germany
Type HO 21
very good condition, ready for immediate use
two-piece gate sets
Bftgryzpze
Gate sets 21 and 6 mm are included more
|
|
9
1978
excellent (used)
The following article is for sale:
- Our offer number: 114/76
- Metal detector for conveyor belts
- Boekels Aachen
Bdgid0sqks
- Type: EQa 65 x 35
- year of construction 1978
- Weight approx. 300 kg
- External dimensions: 1.05 x 0.69 x 0.60 m (WxHxD)
- Integrated control
- The detector was built into a conveyor belt and works perfectly.
- Interior dimensions: 0.83 x 0.34 x 0.60 m (WxHxD)
- optical condition according to photos
- used
- functional
Shipping on request. We ship daily with DHL, gen... more
|
|
2018
as good as new (ex-display)
Machine is on display and was used for demonstration purposes only. Optimill FU5-600 HSC15 CNC 5 - axis simultaneous machining center directly from the manufacturer.
Optimill FU5-600 HSC15 - The OPTIMUM Premium CNC milling machine with Siemens control SINUMERIK 840D SL is characterized by power, speed, precision and long life.
Heavy execution
High productivity
Tool changer double-arm gripper with 32 tool places in standard scope of delivery
Heidenhain glass scales - additional measuring system e... more
|
This may be of interest to you
Machineseeker becomes biggest sponsor of the 2nd Bundesliga in Germany
New Machineseeker.com TV commercial with Michael van Gerwen
10 valuable tricks for buying used machines online
Sponsorship of Michael van Gerwen and TV advertising
Photo gallery: The World's 10 biggest excavators
Sample sales contract for used machines in nine languages
