Koelle dh 63 buy used

Recognised location: Ashburn (US) (Change)
Enter e-mail address
or
Move
6

thickness planing machine Koelle DH63

More Koelle Dh 63
Egenhofen / HerrnzellGermany dealership location
6816 km
1985
good (used)
Type: DH63 used machine working width: 630mm MaxWorking height: 220mm 4-blade shaft  segmented platen feed roller: rubber outfeed roller: rubber electricTable stroke feed speeds: 4 / 6 / 12 min Power: 7,5kW E0kazfypi Year of construction: 1985 Location: Warehouse / 82281 Herrnzell more
1
cleaned, function checked, test run new knives inbuilt table guide rolls adjusted new damper inbuilt machine compl. adjusted used, good condition manufactured by Koelle type DH 63 built in 1988 Masch.-No. 295 planing width ca. 610 mm table-sliding rolls 2 piece adjustable joint pressure plates steel-gates pickup roller feeder 0 / 6 / 9 / 18 m/min. number of cutters 4 piece automatic motor brake U2uim37os cutter system V-ledge - safety cutter spindle digital display for planing height electrica... more
1
Elect./Voltage: Bbuys79hre 2001 Daewoo DHP-630 Horizontal Machining Center -- Pallet table size: 24.8" x 24.8" (630 mm). -- Max table load: 2,200 Lbs. (1000 kg). -- Pallet change time: 12 Sec. -- Degree of indexing: 1°. -- X-Axis travel: 39.4" (1000 mm). -- Y-Axis travel: 33.5" (850 mm). -- Z-Axis travel: 33.5" (850 mm). -- Spindle taper: 50. -- Spindle speed: 12,000 RPM. -- Spindle motor: 33 HP. -- Tool changer: 60 station. -- Machine dimensions: 138” x 274" x 134" hi... more
6
Band sawing machine Koelle in very good condition. Type: BS630 roller diameter 630 mm blade guide above and below blade length: 4500 mm blade width of 25 mm maximum cutting height: 340 mm table to adjust 45 degrees, automatic motor brake was retrofitted automatic three-star switch has been retrofitted weight: 600 kg Uqq8qsq0l more
4
planing width 630 mm planing height 230 mm 5,5 kW Uyfhl03sa more
3

Conditioner thickness Planers Metabo ADH 1630

More Metabo Adh 1630
Bieg 3, 91598 Colmberg, DEGermany
6710 km
1999
ready for operation (used)
METABO conditioner Thicknesser ADH 1630 Motor: 2,2 kW 380 volts Crpbumj Planing width: 30 m Planing height of max. 16 cm 2 drum more
6

thickness planing machine Kölle DH63

Egenhofen / HerrnzellGermany dealership location
6816 km
1995
ready for operation (used)
Type: DH63 used machine working width: 630mm MaxWorking height: 220mm 4-blade shaft Bbkvqqkknc segmented platen feed roller: stehl outfeed roller: rubber electricTable stroke feed speeds: 4 / 6 / 12 min Power: 7,5kW Year of construction: 1995 Location: Warehouse / 82281 Herrnzell more


koelle dh 63
every day

New machines via email!

Be informed!
5
Planing width 630 mm Table length ~ 2000 mm Clearance height 220 mm Motor output 5.5 kW Knives shaft - Strip blades 2pcs Steel rollers Suction pipe for fixed width and set off Aigner help stop 2q2y9i more

Dickenhobelmaschine Kölle DH 63

NattheimGermany dealership location
6733 km
1998
used
Lagerort: Lieferant Jccyvs7 more
3
Year of construction: 2001 Hours of operation: 16995 Machine number: 1635 track, m: 3.0 Crane type: ASX II (at an additional cost with new crane ESX I available) Range, m: 12.9 (range the ESX I: 13.2 m) Capacity (without hook): 1,240 kg / 12.9 m (lifting capacity at ESX I: 2,300 kg / 13 m) Hook: with Crane position: in front of the cabin Cabin side: right Eueyt9rxm Saw: Alpha Saw dust container: with Measurement: electric meter (caution! On photo is still monolithic machine, this is ... more
2
Throat 630mm feed 7 m / min. Cabinet foldable table extension Xf3e0fcwx more
6
Back lathe Fabr. WMW NILES type DH 250 III Year of construction 1989 apparently never used! Technical data: Swing over rear rotary slide 250 mm Tip height on rear rotary slide 138 mm Tip height over bed 270 mm Turning length 630 mm Top width 900 mm Spindle mount DIN 55021/8 Spindle hole 26 mm Swivel range of the rear rotary slide 360° Swivel range of the cross slide 360° Tool-quick return 25 mm Range of rear Rotary stroke adjustable 0-32 mm Speeds continuously 1.8-450 RPM. 6 sp... more
4

band saw Koelle BG 63

Hösbach RottenbergGermany dealership location
6602 km
1989
used
Cutting width 600 mm Motor 2,2KW 400V 50 HZ Dust nozzle 120 mm Band leadership up and down Swiveling worktable 45° Izdwjwh Cutting height 330 mm Blade length 4340 mm to 4500 mm G & 2830 M3I2J more
2

Planing Machine KOELLE HD63

D - HessenGermany dealership location
6619 km
used
Weight: 1.100 kg Dimensions: 1,8 x 1,25 x 1,6 m Planing: 630 mm Adjustment Height: 230 mm Knivesl: 2 Pieces J8r9sm07 Collar Depth max.: 40 mm Cut Rate: 8 mm Table Length: 1200 mm Blade Speed: 5000 U/min. Engine Power: 5,5 kW Feed speed: 10 / 16 m/min brake: electrical more
3

Thickness Planer Koelle HD 63

D - HessenGermany dealership location
6620 km
used
planing width. 630 mm planing height 230 mm throat depth max: 40 mm table length: 1200 mm diameter shaft speed: 5000 r / min. Motor power: 5.5 kW, 7.5 HP feed: min 10/16 m / min. Weight: 1100 kg Machine dimensions (L x W x H): 1800 x 1200 x 1600 mm Tpucmn more
6
Motor 5.5 of kW planing width 630 mm planing height 230 mm steel feed & drawer roller 4 drum solid knife task table length 1000 mm inspection length 1000 mm C02azgsk more
1
Elect./Voltage: 220/440 V, 60 Cy, 3 Ph. Bbyzyhcsgr ADIRA QHX-6325-CBP Up-Acting CNC Brake Press w/DNC Control -- Capacity 70 ton x 99" Bed -- Distance between housing 80.71" -- Stroke 3.94" -- Maximum open height w/o die holder 12.21" -- Throat depth 19.69" -- Speed in mm/sec 70/9/100 mm/sec -- Dimension 125" x 65." x 77" high -- Weight 10,000 [...] with: -- Cybelec 800 CNC Control -- Multi-axis 2D Color XYZR -- Pedestal remote foot and hand control -- Die clamps more
6
Retrofitted: 2018 Numerical control: HEIDENHAIN TNC-426 Technical features Dimensions Table dimensions: 5000 x 1100 mm Number of T slots: 8 T slots dimensions: 22 mm Traverses of axis X axis traverse: 5000 mm Y axis traverse: 1200 mm Z axis traverse: 1500 mm Milling head Nbn7p Head typ... more
5
grinding diameter:250 mm grinding length:630 mm centre height:125 mm control:Siemens S7 feed stepless: swing diameter:280 mm centre distance:630 mm grinding head swivelling:90 ° table swivelabel +/-:+10/-7 ° grinding wheel dia. x width x bore:400 x 40 x 127 mm grinding wheel dia. according abrasion:250 mm max. grinding wheel width:63 mm swing in open rest:70 mm swing in closed rest:70 mm taper bore of workpiece spindle:4 Morse Baggvpgbnz taper of tailstock quill:4 Morse stroke tailstock cente... more
1
Elect./Voltage: 600 V, 60 Cy, 3 Ph. Da89bxf DOUCET DH-8-S2 End Matcher --- Heavy Duty double sided hydraulic feed with traverse bars and transfer roller conveyors. - 9/16" to 1" thickness cap., 8" to 96" max. material length, 96" max. between right & left heads. -- Feed traverse bars are 2" wide on 9" centers machined to allow 9/16" min. material thickness x 7" max. width, 2" wide at the ends and 1-3/4" wide in the center connected by tubes so each side of the feed bars are adjustable making... more
6
Retrofitted: 2018 Numerical control: HEIDENHAIN TNC-407 Technical features Dimensions Table dimensions: 4500 x 1100 mm Number of T slots: 8 T slots dimensions: 22 mm Traverses of axis X axis traverse: 4000 mm Y axis traverse: 1200 mm Z axis traverse: 1500 mm Milling head Head type: Univ... more
2

Hood Jufeba DH 140

BabenhausenGermany dealership location
6588 km
good (used)
Hood Extractor hood Exhaust air top With exhaust fan Riufaa8 Grease filters Stainless steel with lighting 230 V Measurements: 1400 x 1000 x 450 mm BxTx H more
2
spindle diameter 125 mm x-travel 1600 mm y-travel 1400 mm z-travel 1600 mm table-size 1800 x 1600 mm spindle taper MT 6 Up2qyq9oo drilling depth in one stroke 1000 mm quill stroke 1000 mm turning speed range - spindle 8 - 1250 U/min turning speed range - facing chuck 5 - 315 U/min feeds longditudinal/cross/vertical 1 - 800 mm/min table rotating 360 ° indexing 0,5 ° distance table - spindle center 50 - 1350 mm radial face slide feeds: 1 - 800 mm/min facing chuck dia. 800 mm spindle motor 17 kW ... more
1

DEBARKER MORBARK 632

MID ATLANTICUnited States dealership location
518 km
used
Elect./Voltage: DIESEL POWERED Juwqra MORBARK 632 - Debarker, Diesel Powered:Has a 20 ft. in-feed and out-feed troughs, -- 250 HP CUMMINS power unit, -- 20 ft. MORBARK Hyd. Live deck with 2-arm stop and loader and (4) legs. -- Also includes (2) MORBARK electric bark conveyors, 20 ft. and 30 ft. more
5

Machining Center - Universal HERMLE U630T

More Hermle U 630
Lager Wilbertoord HollandNetherlands dealership location
6307 km
1997
used
x-travel 630 mm y-travel 500 mm z-travel 500 mm 9qypnnndk spindle taper SK40 spindle turning speed range 7.000 U/min number of tools 20 control Heidenhain 410 more
4

Dough Sheeter Seewer Rondo SKO 63

BabenhausenGermany dealership location
6588 km
good (used)
Dough sheeter combi Baqmz8nzqe Seewer Rondo Model: SKO 63 Combi machine for all doughs for unrolling and touring Extending table left with long roller / roller below with train for wrapping products Bandwidth 615 mm Roller adjustment stepless New bands and scraper blades Connection 400V, 16A-CEE plug Machine is cleaned and workshop checked. more
7
Deckel Maho DMC 63 V control Siemens 840 d Handwheel Siemens built in 1997 procedures X 630 mm Y 500 mm Z 500 mm spindle 20-8,000 rpm SK 40 recording tool changer 24 compartment table 800 x 500 mm Chip conveyor IKZ (internal coolant supply) 20 bar Coolant tank Ssppq0 Rinse-gun Bed flushing Spindle hours approx. 5900 The sale is carried out only to entrepreneurs in the sense of § 14 BGB more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Ncce9 MORBARK 636 Rosser Head Style Debarker complete with the following features: -- All new Hoses with only 50 - 60 hours of run time. -- Mounted on Log Channel Input/Output Chain Conveyor. -- Complete with Hydraulic Power Unit. -- 75 HP and 35 HP Motors are on the Power Head. -- Full Tank, Motors, Hoses , Cab with Full controls, etc. are included. -- Previous owner says, "This was working well, and we pulled it out to install the Cambio which wi... more
10
Ejcjk8 more
1

Sheeter Fritsch Rollfix 3 WK 630

BabenhausenGermany dealership location
6588 km
good (used)
Rolling machine combi Fritsch Rollfix M2smr Model: 3WK 630 with pull-out table down with long-acting Machine mobile Foot and hand control Connection 400V, 16A-CEE connector more
6
grinding length 600 mm grinding width 300 mm workpiece height ca. 500 mm grinding range 650 x 300 mm mm x-axis 840 mm y-axis 500 mm Yrpyqo z-axis 310 mm table load 300 kg max. dia. of grinding wheel 400 mm max. width of grinding wheel 50 mm bore 127 mm rapid traverse Y-/Z-axis 600 / 1.000 m/min weight 2700 kg dimensions 2,9 x 2,25 x 2,1 m Accessories - 8 grinding wheel flanges - documentation more
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Bb7lbmjhob COE 4 Ft. Veneer Peeling Line with the following major components and features: -- Log cut-off saw. -- Geometric lathe charger. -- Dual spindle 4' COE Model 263 Lathe: &#9679 Diameter of outer spindle 7" &#9679 Diameter of inner spindle 4" &#9679 Max. swing 48" &#9679 Knife length 56" &#9679 Lloyd controls including motor starters &#9679 Main drive DC-AC 165 HP/200 HP -- Veneer conveyor to clipper. -- Pneumatic [...] AVAILABLE: VENTEK Veneer... more
10
Bb7oeuay3o more
3

Sheeter Seewer Rondo SKO 63

BabenhausenGermany dealership location
6588 km
good (used)
sheeter Combined Seewer Rondo Model: SKO 63 for all kinds of dough to roll out and Tourieren extending left with Moulder / moulder below with trains for wrapping products Wzgrtnjzy Connection 400V, 16A-CEE plug 6 month warranty more
5

Eccentric Press - Single Column SCHULER PDr 63/250

Bünde bei BielefeldGermany dealership location
6460 km
1964
used
pressure 63 t throat 250 mm stroke 8 - 100 mm 32ywznsjj no. of strokes 65 /min distance table/ram, max. stroke down, adjustm. up 315 mm table surface area 710 x 500 mm hole in the table 250 mm table height over floor 800 mm passage to the back 290 mm ram surface 450 x 280 mm slide drill hole x depth 40 x 80 mm ram adjustment 63 mm operating pressure 4,9 bar power requirement 5,5 kW weight ca. 3,6 t dimensions 1,4 x 1,5 x 2,6 m Electric 380 Volt Foot switch Machinefeets Double-walled ec... more
1
Elect./Voltage: Bbu0iss3gy TOS SUS 63 Heavy Duty LatheSpecifications: -- Maximum Swing Over Bedways 25" -- Maximum Swing Over Cross Slide 15.3" -- Distance Between Centers 320" -- Spindle Hole Diameter 3.2" -- Spindle Speeds: (22) 9-1120 RPM -- Spindle Nose (Camlock) D1-11 -- Cross Slide Traverse 16.5" -- Tool Rest Traverse 8" -- Dimensions of 4-Way Tool Post 8.5" x 8.5" -- Number Positions 4-Way TP Adjustable 24 -- Tailstock Quill Diameter 5.1" -- Tailstock Quill Travel 13" -- T... more


koelle dh 63
every day

New machines via email!

Be informed!

to

to

Change search
KOELLE DH 63
SELL IMMEDIATELY
on Europe's market leader for as little as € 0,49 per ad.
Find out more now


Phone: +1 312 94 04 581
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close