6
edge thickness 0,4 - 12 mm
work piece thickness 10 - 55 mm
work piece length min 160 mm
work piece width min 65 mm
feed speed 13 m/ min
compressed air 7 bar
machine length 5420 mm
weight 1950 kg
glue pot with quick melt system
glue application roller wit left and right turning
edge magazine for PVC and strips
motor height adjustment for pressure beam
pneumatic pressure rollers for edge magazine
control panel, rotatable
all aggregates in-line controlled
cutting
milling combinati...
8
Premilling Unit: yes
Corner Rounding Unit: yes
Max feed speed: 14 m/min
Maximum panel thickness: 50 mm
Operating Units: 7 nr
Fw2zwwf
7
BRANDT
Typ: OPTIMAT KD79 / 2CF
- panel thickness 8 to 55 mm
- edge thickness 0.4 to 12 mm
- feed rate 14m / min
- premiling unit
- cutter end tilting
- 2 groups top / bottom trimming
- corner round copying
- edge scraper
- brush
Pwwiqa
4
glue roller, pressure unit, cross-cut unit 3130 swivelling 2x0,35 kW, milling combination 2x4130 swivelling - 1. unit combi radius/straight - 2. unit chamfer, scraper 5705 radius up to 3mm, buffing unit 5380 2x0,18kW, power connection 400V 9kW, compressed air connection 6bar, suction connection 1x180 mm, weight approx. 1950kg, workpiece thickness 10-55mm, workpiece length min 160mm, workpiece width min 65mm, edge thickness 0,4-12mm, roller cutting 3x45 or 0,8x60mm, feed13 m/min - as taken back b...
6
Gluing on rolls and strips up to 8 mm
caps
Flush/radius milling
copy unit
profile scraper
Wobble
One-sided edge banding machine in a right-hand version suitable for craftsmen for hot-melt adhesive gluing.
Technical specifications:
Edge thickness 0.4 - 8 mm
Roll separation max. 3 x 45 mm
Workpiece thickness 8 - 40 mm
Workpiece width min. 65 mm
Workpiece length min. 160 mm
Feed max. approx. 11 m/min.
Electrical 400V, 3ph, 50Hz
Pneumatic connection at least 6 bar
Connection value approx. 7 kW
Tot...
12
Edge bander Brandt
type: KD 86
year of manufacture: 1993
for veneer material thickness up to 12 mm
glueing from the roll up to 3 mm with pneumatic clipping station
glueing application unit with Quickmelt-container
solid built pressure zone with 4 rolls
clippping for for front and back
router station flush, chamfer
second router station radius R 3 mm
corner copying
radius spoke shave R 3 mm
wood dust collecting box
ploshing station
pneumtic package for polishing station
extendable support bar f...
8
Edge banding machine Brandt
fully operational possibility to check before buying
glue application with a roller
pneumatic pre-cutting guillotine
pressure rollers
cut-off balls
2 x top and bottom milling cutters
max. edging thickness in a roll 2mm
max. wrapping height 45mm
length of machine with plate 305cm
Prarv
10
Edgebander BRANDT OPTIMAT KD 68 CF
- year of production 2001
- DTR
Bllgckho
TECHNICAL SPECIFICATIONS:
machine tool adapted to the processing of PVC / ABS edges
veneer up to 3 mm thick and wooden sticks up to 9 mm thick
pre-cutter - plate milling
tape pressure
glue tank, hot melt glue granules, additional glue application roller
heated strip of tape
guillotine - pre-cutting of the veneer
3 pressure rollers
2 ready-to-cut ball crushing units
2 milling aggregates for edge shaping (radial mi...
3
Fully working condition, serviced on time, last years we use it as reserve equipment, now switched off from line.
Iqjj0vr
15
Premilling Unit: yes
Corner Rounding Unit: yes
Max feed speed: 11 m/min
Maximum panel thickness: 60 mm
Caeybarguo
Operating Units: 8 nr
7
Specification:
Feed Speed 11-14m/min
Workpiece Thickness: 8-60mm
Edge Strip Material 0.4 – 8mm
Pre-milling Unit 2 X 2.2Kw
Gluing Unit A8
Quick melt Hot Melt Application Unit
Caosclrssg
End Trim Unit Chamfer / Straight 2X0.18Kw
Trimming Unit 2X0.55Kw antirotating
Multifunctional Contour Trimming Unit
Profile Scraping Unit with Quick Change Heads
Glue Joint Scraping Unit
Buffing Unit
Power Control PC 20
Homag Group Quality Kit
PU Top Pressure Rollers
Set of Pneumatic Adjustment End Trim + Scrapin...
9
Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine
-Manufacturer: Homag, milling unit from edge banding machine BRANDT KM 35
-Motor: Homag type LF-55L 0.55 kW / 12000 rpm
-Voltage: 220V / 200 Hz
-Dimensions: 540/450 / H565 mm
Glopzvfv
-Weight: 67 kg
5
11
Numerical Control Power Control Pc 16 Panel height 8 - 50 mm Solid wood mm 8 Pvc / Abs mm 0,4 - 3 Feed speed up to mt / min 11 Adjustable working height Panel support guide Side roller conveyor with idle wheels for panel support Rectifier group Reel holder plate Gluing unit for EVA hot melt glue with glue pot with quick release system Edge pressure group on straight profiles with pressure rollers Header group Overlapping trimming unit with 2 motors Rounding unit with 2 motors Edge scraper group ...
15
completely overhauled
HOMAG BRANDT KDF 670
single sided edge banding machine , year of construction 2016
LISTING OF THE AGGREGATE EQUIPMENT:
- PC 20+
- extended infeed ruler
- automatic infeed with clack and traffic light system
Caogfps3si
- automatic edge infeed
- JOINTING UNIT
- gluing unit Quikmelt with automatic feeding system
- magazine + heating station
- pressure zone with 4 rollers automatic adjustment
- CAPPAGGREGAT
- PRE-MILLING UNIT
- MILLING UNIT
- SHAPING UNIT
- PROFILE SCRAPER
- FL...
15
Premilling Unit: yes
Corner Rounding Unit: yes
B3wwqkl
Max feed speed: 11 m/min
Maximum panel thickness: 60 mm
Operating Units: 9 nr
6
Good condition.
Ehg33pv
5
Brandt edge banding machine
type Optimat KDF 650 C
year 2014
JOINTING UNIT 2 X 2,2 KW 200 HZ
GLUING UNIT A12
TRIMMING UNIT CHAMFER/STRAIGHT 2 X 0,35 KW
TRIMMING UNIT 2 X 0,55 KW COUNTER-ROTATION
SHAPING UNIT 2 X 0,35 KW WD 60
Bmrcr3n0mz
PROFILE SCRAPER WITH QUICK CHANGE HEADS
FREE SPACE GLUE JOINT SCRAPER
BUFFING UNIT
9
9
POWER CONTROL control Panel height (mm) 60 Pvc-abs edge thickness (mm) 3 Solid edge thickness (mm) 12 Feed speed mt / min 20 Upper motorized rubberized belt Manual entry guide Anti-adhesive group Rectifier group Controlled by C.N. Bonding with EVA glue Edge holder plate End trimming unit with automatic inclination adjustment Offset edger trimming unit with two NC controlled motors Rounding unit with 2 motors Edge scraper group Glue scraper group Brush group
Cpyytjov
13
Edge banding machine BRANDT , Type O KDN 200 Ambition 1200, used,
Year of manufacture 2010
Air pressure 6 bar
The power supply voltage 400V – 3 ph - 50 Hz
Total power 4 kW
Work piece thickness from 0, 3, 4 to -8,50 mm
Extraction diameter 3 x 60
working height 950 mm
Feed speed/ Sealing side speed: 10m/min
Coil cut off max: 0,4 mm -3,0x45 mm
Qhol9
noise emission db(A) 84 to 87
Transport/overall dimensions L3.450xW1300xH2180mm
Net weight 1200 kg
Gluing, End cutting, Top & Bottom trimming, Sc...
15
Premilling Unit: yes
Vapi0jgo
Corner Rounding Unit: yes
Max feed speed: 20 m/min
Maximum panel thickness: 60 mm
Operating Units: 9 nr
11
Pre-milling unit 2 x 2,2 kW 200 Hz
Diamond milling unit dim.: 100 x 44x 30 mm Z = 3
Gluing unit A 12
Pre-heating of the panels with infra lamps.
Could be used with EVA and PU
End-trimming unit 2x 0,35 kW
The unit is tiltable 0-15°
2 motors, 0,35 kW / motor , 200 Hz, 12000 RPM
Soft touch function for delicate panels
2 saw blades 125x 32 x 2,4 mm Z = 24
Feeding speed : 8-20 m / min
Edge-trimming unit 2 x 0,55 kW
max foil thickness:15 mm
max. panel thickness: 8-60 mm
2 motors 0,55 k...
3
BRANDT SINGLE SIDED EDGE BANDING MACHINE
AMBITION 1890
Type KDF 890
year 2014
for the processing of straight workpiece edges and for glueing
and finishing of different edging
materials in longitudinal and transverse pass.
- Feed rate ¦ 8 - 20 m/min
- working height ¦ 950 mm
Ciuapid
- Pneumatic connection ¦ min. 6 bar
total length 7760 mm
2. WORKPIECE AND EDGE PARAMETERS:
- Workpiece width min:
- For workpiece thickness 8-22mm ¦ 70 mm*.
- For workpiece thickness 23-40mm ¦ 120 mm*
- For workpiece ...
13
Edge banding machine BRANDT OPTIMAT KD 66
- Year of manufacture 1999
Low Hours of operation. Was used in a very small Woodshop. Always Serviced.
TECHNICAL PARAMETERS:
Machine suitable for processing PVC/ABS edges
Veneer up to 3mm thick and wood veneer up to 9mm thick
Pre-milling - milling the panel
band printing
Glue tank, for hot-melt adhesive granules, additional roller for glue application
heating strip
Guillotine - cutting veneer
3 pinch rollers
2 pre-cutting devices with saws
2 milling...
9
Power Control 20+ control Panel height 8 - 60 mm Pvc / Abs mm 3 Solid wood up to 8 mm Feed speed 8 - 14 mt \ min Working height electronically adjustable by C.N. Side roller conveyor with idle wheels for panel support Rectifier group with two motors KW 2.2 each Reel holder plate A8 gluing unit for EVA glue with pre-melter and glue pot Edge pressure group on straight profiles with adjustable pressure rollers End trimming unit with automatic inclination adjustment Tilting gleaning unit with 2 moto...
12
Edge thickness 0.4 - 8 mm
Workpiece thickness 8 - 60 mm with motorized height adjustment
feed 11 m/min; electrics 400 V - 50 Hz; pneumatics min. 6 bar
connection approx. 16 kW; total length 4770 mm,
Machine equipment:
Electronic control Easy Control EC10+
Infeed ruler with extension 300mm,
Fuegefraesen 2x 2,2kW
gluing unit A8 for hotmelt automatic edge banding, additional application unit for PU glue
cross-cut unit chamfer/straight 2x 0,18 kW with pneumatic adjustment
trimming unit 2x 0,55 kW in...
15
Premilling Unit: yes
B02jnslfbg
Corner Rounding Unit: yes
Max feed speed: 18 m/min
Maximum panel thickness: 60 mm
Operating Units: 7 nr
10
SINGLE SIDE EDGE BANDER (RIGHT)
Bgo02cu0ik
Edges (band in rolls) thickness (Min/Max) mm 0,4 / 12
Panels thickness (min/max) mm 8 / 60
Numerical Control PC 20+
Feeding speed (adjustable) m/min max 16
Top pressure system with rubber wheels
Spraying unit (Anti-sticking liquid)
In-feed fence
Pre-milling Unit (vertical joint trimmers) FG 3500 (2 x Kw 2,2)
Glueing Unit (Hot Melt Glue + Quick Melt system)
Edge coils supporting unit (reels N°) 1
Snipping (end-cutting) unit HL 6110 (2 x Kw 0,35)
Rough...
11
Feed rate 8-18 m/min
Exvqfqk7
Aggregates equipping:
Joint milling unit
Gluing unit A12
Trimming unit chamfer / straight
Pneumatic adjustment of caps chamfer / straight
Pneumatic 2-point adjustment caps
Pre-Milling unit
Pneumatic 2-point adjustment
Multifunctional form milling unit
Scraper profile unit
Pneumatic adjustment of scraper
Glue joint scraper
Buffing unit
Electronics control: POWER CONTROL PC 20+
9
Power Control 20+ control Panel height 8 - 60 mm Pvc / Abs mm 3 Solid wood up to 8 mm Feed speed 8 - 14 mt \ min Working height electronically adjustable by C.N. Side roller conveyor with idle wheels for panel support Rectifier group with two motors Reel holder plate Gluing unit for EVA glue with glue pot Edge pressure group on straight profiles with adjustable pressure rollers End trimming unit with automatic inclination adjustment Tilting gleaning unit with 2 motors with electronic control fro...
15
Premilling Unit: yes
T0pk39g8
Corner Rounding Unit: yes
Max feed speed: 11 m/min
Maximum panel thickness: 40 mm
Operating Units: 7 nr
13
Premilling Unit: yes
Corner Rounding Unit: yes
Max feed speed: 16 m/min
Maximum panel thickness: 60 mm
Prmejx37
Operating Units: 9 nr
15
Premilling Unit: yes
Corner Rounding Unit: yes
Max feed speed: 18 m/min
Maximum panel thickness: 60 mm
Qc3jt
Operating Units: 9 nr
8
Premilling Unit: yes
B02jhkco3r
Corner Rounding Unit: yes
Max feed speed: 20 m/min
12
Premilling Unit: yes
Fohproi
Corner Rounding Unit: yes
Max feed speed: 14 m/min
Maximum panel thickness: 12 mm
7
Premilling Unit: yes
Cy9qnsas
Max feed speed: 14 m/min