Used Brandt Optimat Kd 56 for sale (98)

Condition: repair required (used), Year of construction: 1996, Edge banding machine Brandt Optimat KD 69 0 In need of repair, the control system no longer functions properly Without premilling Edge trimming front/rear Corner rounding top/bottom Corner rounding front/rear Scraper top/bottom Cgodoylttgspfx Albsu Polishing top/bottom

Condition: used, Year of construction: 1996, Edge thickness: 0.4 - 12 mm Roll edge: 3 x 45 mm or 0.8 - 60 mm Minimum workpiece width: 65 mm Minimum workpiece length: 160 mm Workpiece thickness: 10 - 55 mm Feed rate: 13 m/min Pre-milling (joining) Glue pot Quickmelt Gluing unit Trimming Flush trimming Chamfering Radius trimming Corner rounding Flat scraper Buffing unit Machine dimensions: 7450 x 1220 x 2400 mm Weight: 3000 kg Storage location: Nattheim Cedpsvvkd Tefx Albogu

Condition: good (used), Brandt edgebander (Homag group) for roll and ABS edge banding. Complete with pre-milling units at entry and all profiling groups with corner rounding units. In perfect working condition. Codpfx Aljy N Ukijbogu

Condition: used, machine/vehicle number: 007517, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, Hot Air Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 18 m/min Maximum panel thickness: 60 mm Cgedpfx Aewuz E Rjlbju Operating Units: 9 nr

Condition: ready for operation (used), Year of construction: 2008, Brandt Optimat KDF 420 Edge Banding Machine Powercontrol PC 20 control system Edging thickness: 0.4–8 mm Edging height: 8–60 mm Csdpfx Aljx Dzw Nobsgu Joint trimming with DIA cutter End trimming Flush and radius trimming Radius scraper blade Flat scraper blade Buffing unit Machine length: 4360 mm Operating manual and tools included Year of manufacture: 2008 Price: 15,000.-

Condition: used, Year of construction: 2003, machine/vehicle number: 0281062425, Used Edge Banding Machine Year of manufacture: 2003 Equipped with a gluing unit for hot-melt adhesive granules Cgjdpfoy Nxgnjx Albou Glue reservoir located below the glue roller Glue application via roller (co-rotating and counter-rotating modes) Features: Automatic edge magazine (coil and strip material) Pressure zone with pneumatically driven main pressure roller and additional rollers for optimal bonding of the glue layer Centrally adjustable top pressure Central manual lubrication of the chain conveyor Control panel at the machine infeed Machining Units: End trimming unit (saw units) for front and rear overhang 2 motors, each 0.18 kW Swivel range: 0–15° Flush trimming unit (top and bottom) with vertical and horizontal tracing Swivel range: 0–15° 2 motors with interchangeable cutters (straight/radius) Digital counters for fast and precise adjustments Pneumatic two-point adjustment Buffing unit for final finishing Additional Equipment: Extendable support table up to 350 mm Integrated section control (contactless operation) Settings via keyboard and LED display Technical Data: Workpiece thickness: 8–50 mm Edge thickness: 0.4–3 mm Feed speed: approx. 9 m/min Connected load: 4.1 kW Compressed air: 6 bar Weight: approx. 750 kg Machine length: 3,150 mm Location: Bulgaria

Condition: used, BRANDT Optimat KDF340 Edge Bander Pre-milling cutters Adhesive application by roller Cjdpfx Aey Dc Ulelbjgu Pneumatic pre-cut guillotine Pressure rollers End-cutting saws Top-bottom milling unit R1-R2 Profile scraper Polishing unit Max. workpiece height: 45 mm Max. edge thickness from roll: 3 mm Feed speed: 10 m/min Machine length: 350 cm Machine inspected, ready for operation

Condition: ready for operation (used), Year of construction: 2005, General Data Machine weight 2600 kg Measurements height 2300 mm Dimensions Machine Length 6060 mm This BRANDT OPTIMAT KDF 670 edgebander was manufactured in 2005. It features a comprehensive range of processing units including pre-milling, glue application, edge feeding and cutting, and polishing. Capable of handling workpiece thicknesses from 8 to 60 mm and edge bands up to 15 mm. Feed speed reaches up to 20 m/min, optimizing productivity. Consider the opportunity to buy this BRANDT OPTIMAT KDF 670 edgebander. Contact us for more information about this machine. Csdpfx Alsx E Eggebogu Application Types Edge Banding

Condition: excellent (used), Brandt Optimat KDN340 Edge Bander Glue application by roller Tank features exchangeable system (machine is supplied with only one tank) Pneumatic pre-cut guillotine Pressure rollers End-trimming saws Top/bottom milling unit R1-R2 Profile scraper Polishing unit Max. workpiece height: 45mm Max. edge thickness (in roll): 3mm Feed speed: 10m/min Machine length: 310cm The machine is well-maintained and in very good condition. Cedpfx Asywwqzolbogu

Condition: used, Year of construction: 2008, Connected load: 15 kW Feed speed: 14 (11) m/min Workpiece thickness: 8 - 60 mm Edge thickness: 0.4 - 8 mm Roller separation: max. 3.0 x 45 / 0.8 x 65 mm Extraction diameter: 120 / 160 / 100 mm Working height: 950 mm Dimensions: 6260 x 1560 x 2300 mm Weight: approx. 3000 kg Storage location: Supplier Codpfx Aey Ruzqjlbjgu

Condition: used, Year of construction: 2002, Machine length: 6240 mm Weight: 2400 kg Power consumption: 14 kW Extraction diameter: 120 / 140 mm Cgedpevvkfwjfx Albou Storage location: Nattheim

Condition: used, Year of construction: 1994, Used machine Year of manufacture: 1994 Condition: as is/was in production until recently Equipment and technical data: Glue application unit with glue pot and applicator roller Pressing station Cjdsy Nuhbepfx Albogu Cut-off unit with linear guides Flush trimming unit with horizontal and vertical sensing with 200 Hz motors swivelable 0 - 30° with radius scraper with buffing unit Edge thickness 0.4 - 5 mm Coil separation 0.8 x 60 or 3 x 30 mm Workpiece width min. 55 mm Workpiece length min. 160 mm Workpiece thickness 10 - 55 mm Feed rate 11 m/min Pneumatic connection 6 bar Dimensions 3855 x 1000 x 1610 mm Extraction connection 100 mm Weight 1000 kg Availability: approx. June 2026 Location: Baden-Württemberg

Condition: used, Year of construction: 1985, edge thickness 0,4 - 12 mm work piece thickness 10 - 55 mm work piece length min 160 mm work piece width min 65 mm feed speed 13 m/ min compressed air 7 bar machine length 5420 mm weight 1950 kg glue pot with quick melt system glue application roller wit left and right turning edge magazine for PVC and strips Csdpjc Tmygofx Albsgu motor height adjustment for pressure beam pneumatic pressure rollers for edge magazine control panel, rotatable all aggregates in-line controlled cutting milling combination with 2 aggregates, 1st aggregate straight, 2nd aggregate radius and phase milling tool draw blade buffing unit central lubrication for transport chain quick change system edge control system with error msg IR heater CE Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: good (used), Year of construction: 2008, machine/vehicle number: 0-260-20-1170, Kantfräs & kap Brandt Type: Optimat FTK 130 No: 0-260-20-1170 Year: 2008 The FTK 130 has been conceived as complementary to edge banding machines. The main application of the FTK 130 is shaped workpieces, where internal as well as external radie can be processed. Also straight workpieces can be easily processed. Shaped workpiece trimming technology For small shops the FTK 130 is offering a flexible and cost effectiv solution for Cgsdpeq Ehpajfx Albsu their trimming requirements. In order to process internal and external shapes, the trimming motors are mountedvertically. Milling and cutting units for simultaneous upper and lower radius/clean milling of excess edging material on workpieces with straight edges and on rounded workpieces with internal and outside radie. Cutting unit to precisely cut excess front and back edge trim material. in the longitudinal direction of the working pressure. Techn info: Milling unit Workpiece thickness approx. 12-55mm Workpiece width min approx. 30mm Inner radius min.ca.35mm Edging thickness max. approx. 3mm Milling tool 2xWPL radius cutter r=3, diameter 67x21x16mm Milling motors 11000v/min Cutting unit Workpiece thickness 12-55mm The thickness of the edging material max. 3mm Saw blade diameter 100mm Sawing width 3mm Center hole 36mm Compressed air 6 bar, connection 1/2", approx. 2000PA Air consumption per stroke approx. 10NL Extraction power diameter 80mm, 510m3/h, air speed 28m/sec Current 400 volts, 2.5kw 50 hz, 3 phase, 16A Dimensions: 1130x765x1480mm (lxwxh) Weight 320 Kg Stock no: 2001877BXA

Condition: used, Year of construction: 2000, machine/vehicle number: 0-260-06-0228, Foot control 1200 x 800 mm suction nozzle 80 mm Cgodoigadlspfx Albsu pneumatic connection cable + plug 16 A 1 set of operating tools 1 set of sensing rollers

Condition: excellent (used), Gluing machine Guillotine cross-cut saws milling cutter Scraper Polishing machine Csdpfjttu Riex Albegu

Condition: excellent (used), Gluing unit Cross-cut saw Two straight cutters Two rounding cutters Codpsxdy Slefx Albegu

Condition: excellent (used), Year of construction: 2014, I sell the fully equipped edge banding machine BRANDT Optimat KDF 220 C, year 2014: Configuration: Cedeu N T Ewopfx Albogu Entry fence manual adjustable Premilling manual adjustable Edge banding EVA glue / PUR glue possible Material pressure zone manual adjustable End cutting saws pneumatic adjustable Tilting radius milling top + bottom manual adjustable Corner rounding 1-motor manual adjustable Radius R2 scrapers pneumatic adjustable ( set of R1 included) Control panel Working thickness adjustment servo driven Material height 8-50mm Edge thickness 0,4-3mm Feeding speed 10m/min. Total length including feeding plate 4150mm Total weight 1320kg Plus one additional glue tank included. Very good condition, fully working! Including full documentation and CE. Available immediately.

Condition: excellent (used), Year of construction: 2015, I sell the fully equipped edge banding machine BRANDT Optimat KDF 440 C, year 2015: Configuration: Entry fence servomotorical adjustable Premilling manual adjustable Edge banding EVA glue / Airtec System Schugoma Material pressure zone manual adjustable End cutting saws pneumatic adjustable Tilting radius milling top + bottom servomotorical adjustable Corner rounding 2-motor manual adjustable Radius R2 scrapers pneumatic adjustable Glue scrapers pneumatic adjustable Polishing brushes Cleaning fluid spraying front and back. Control panel Working thickness adjustment servo driven Material height 8-60mm Edge thickness 0,4-8mm Feeding speed 11m/min. Total length including feeding plate 5573mm Csdpfx Aswun Irslbegu Total weight 1860kg Only 592.198 Meters edgebanded. Very good condition, fully working! Including full documentation and CE. Available immediately.

Condition: used, machine/vehicle number: 006710, Type of edging: Thin edge, Thick edge, Solid wood, Veneer Codpoqy Em Tefx Albsgu Gluing System: EVA Hotmelt, Hot Air Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 11 m/min

Condition: used, Year of construction: 2008, Connected load: 11.5 kW Feed rate: 11 m/min Workpiece thickness: 8 - 60 mm Codpfx Aozab Rijlbogu Edge thickness: 0.4 - 8 mm Roller separation: max. 3.0 x 45 / 0.8 x 65 mm Dust extraction diameter: 1x 120 / 2x 100 mm Working height: 950 mm Dimensions: 5860 x 1560 x 2300 mm Weight: approx. 2600 kg Location: Customer

Condition: used, Year of construction: 2007, with edge gluing: workpiece thickness: 8 - 50 mm, edge thickness: 0.4 - 3 mm, fixed lengths: max. 3 x 45 mm, feed rate: 11 m/min, connection value: 10.5 kW, compressed air: 6 bar, weight: approx. 1250 kg, machine length: 3920 mm. Storage location: Supplier. Cgodpfx Aoy Tpz Delbju

Condition: good (used), Year of construction: 2008, functionality: fully functional, operating hours: 1,400 h, power: 11.5 kW (15.64 HP), workpiece height (max.): 50 mm, edge thickness (max.): 8 mm, total length: 5,860 mm, Single-sided edge banding machine, right-handed version For hot-melt adhesive bonding. Quick-change adhesive unit for hot-melt glue. Can process PU adhesive granulate in compliance with adhesive processing regulations. Glue reservoir positioned leak-proof below the glue roller. Precisely metered glue application to the workpiece via glue roller; no adjustment required for varying workpiece thickness. Selectable glue roller rotation: co-rotating or counter-rotating direction. Glue temperature monitored via electronic thermostat. Automatic glue temperature reduction during work breaks. Infrared hot-melt adhesive activation. Automatic edge magazine for rolls and fixed lengths, including roll holder, Ø 800 mm. Equipped with reinforced pre-cutting shears for thick PVC/ABS, max. 3 x 45 mm. Centrally adjustable top pressure. Control panel at machine infeed. Electronic control system: power control PC 20+ BRANDT control system with color graphics user interface for easy and convenient operation and programming. Technical details: - Tiltable operator panel at machine infeed - Durable short-stroke membrane keyboard - Color graphic flat screen - Industrial PC with Compact Flash disk as mass storage - Aggregated function keys with LED status indicators - Color pictograms to assist user navigation - Online language switching between various foreign languages - Display of essential machine target and actual states - Status messages in plain text - Easy selection and correction of position points - Simple axis adjustment (with suitable unit configuration) - Online help in plain text via accessible help menu - Production data acquisition for production time, edge length, and workpiece count—daily and total values - Inspection and maintenance interval display - Remote service capability via integrated modem and installed service software - Save processing programs Cgodpfeyud S Eox Albju - Production according to processing programs - Data backup of processing programs

Condition: good (used), Year of construction: 2004, The machine is equipped with a joint milling unit, cross-cutting unit, 2 saws, milling station, corner copying, radii with flat scraping blade. Total connected load: 10 kW, compressed air connection: 6 bar. Air consumption per cycle: 43 l/min. Dimensions: 4740 x 1635 x 1706 mm. Body dimensions: 3100 x 1040 x 1706 mm. Edge thickness: 0.4 – 8 mm. Good condition. Transport available at extra cost! Cgedjyl Uurspfx Albsu Due to the age of the used machine, warranty is excluded for sales to commercial customers.

Condition: used, BRANDT KDF 430 Edging Machine Pre-milling cutters Replaceable trimming unit Edge gluing with a roller Pneumatic preliminary trimming cutter Pressure rollers Final trimming blades Adjustable top-bottom milling unit R1-R2, motor-driven Cgedpfxjzarz Ee Albou Corner rounding unit Profile trimming unit Flat trimming unit Polishing unit Max. workpiece height 60mm Max. veneer thickness in roll 3mm Feed rate 8-14m/min Machine length 480cm Machine inspected, ready for operation