Used Brandt Kdf 530 C for sale (98)

Condition: used, Year of construction: 2006, Modell: Brandt O KDF 530 C Dsdpfxozkfu So Aarowd Production year: 2006 Installed power: 11,4kW. Feed speed: 11m/min Workpiece thickness: 8-40mm. Edge thickness: 0,4-6mm. Premilling unit: Yes Gluing unit: Yes, EVA End trimming unit: Yes Fine trimming unit: Yes Corner rounding unit: Yes Glue srapper: Yes Buffing unit: Yes

Condition: used, Year of construction: 2006, edge thickness (max.): 3 mm, feed rate X-axis: 11 m/min, rotational speed (max.): 12,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Panel thickness: max. 50 mm Edge thickness: min. 0.4 mm Edge thickness: max. 3.0 mm Feed rate: max. 11 m/min Number of panel processing/milling units: 1 unit Number of edge processing units: 5 units Pre-milling unit Motor power: 2.2 kW Speed: 1,600 rpm Cut-off saw unit Motor power: 0.18 kW Speed: 12,000 rpm Dwedpfx As Aihdasared Rough milling unit, top and bottom Motor power: 0.27 kW Speed: 12,000 rpm Edge rounding unit Number of motors: 1 unit Motor power: 0.35 kW Speed: 12,000 rpm Edge pulling unit Polishing unit Number of motors: 2 units Motor power: 0.10 kW Speed: 2,700 rpm MACHINE DETAILS Control system: PC 16 EQUIPMENT Pressure roller with idler rollers Edge roller magazine Glue pot for EVA hot-melt adhesive CE marking The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing and use of the machine at the destination. External reference: 8555

Condition: used, Year of construction: 2014, power: 22 kW (29.91 HP), edge thickness (max.): 12 mm, feed rate X-axis: 18 m/min, TECHNICAL DETAILS Feed speed: max. 18 m/min Panel height: min. 10 mm Panel height: max. 60 mm Panel width: min. 70 mm Edge thickness: min. 0.4 mm Edge thickness: max. 12 mm Number of processing units: 9 Pre-milling unit Number of units: 1 Motor power: 2.2 kW Edge magazine and gluing Number of magazine positions: 1 Number of pressure rollers: 4 Edge processing units Number of edge processing units: 7 Cutting unit Number of motors: 2 Motor power per motor: 0.35 kW Flush trimming and rounding unit Number of motors: 2 Motor power per motor: 0.55 kW Corner rounding unit Number of motors: 2 Motor power per motor: 0.35 kW Dwsdpo Aihdljfx Aared Grooving unit Number of motors: 1 Motor power: 3.5 kW Buffing unit Number of motors: 2 Motor power per motor: 0.18 kW MACHINE DETAILS Total connected power: 22 kW EQUIPMENT Processing of thin edges Processing of thick edges Processing of solid wood edges EVA hot melt adhesive system AIRTEK hot air system Overpressure with idle rollers Panel support guides Pre-milling unit with automatic, time-controlled operation Edge roller magazine EVA glue reservoir EVA pre-melter Set of pressure rollers with 4 pressure rollers NC positioning of pressure rollers Cutting unit Flush trimming and rounding unit with NC positioning Corner rounding unit WD60 Grooving unit Edge pulling unit with NC positioning Glue pulling unit Buffing unit Spray unit Machine programming software PowerControl PC20 CE marking The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents with a descriptive character. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External Reference: 7517

Condition: excellent (used), Year of construction: 2016, operating hours: 1,198 h, Brandt Ambition 1120 c edge banding machine with 2 glue pots, joining, corner copying, and two trimming blades. A good entry-level machine with extensive features. A video of the machine in operation can be sent upon request. Edge thickness: approx. 0.4 - 3 mm Workpiece height: approx. 10 - 40 mm Feed rate: approx. 8 m/min Noise protection hood Extendable workpiece support Dust extraction connection: 1x100mm, 4x80mm including the depicted ducting to 200mm Dwjdjzn Afpepfx Aarod Easy-Touch control with color screen for easy machine operation 10 programs can be saved Units: Upper pressure: manual adjustment with crank and SIKO counter Infeed fence: manual adjustment with SIKO counter Joining cutter with diamond cutters, sharpened Total of 2 interchangeable glue pots for quick color change from white to transparent Gluing unit with automatic edge feed for roll material up to 3mm Pressure zone with 3 rollers Miter saw with 2 motors Combination milling unit, easily adjustable by hand for flush trimming, chamfering, and radius Corner rounding cutter R2 with diamond cutter, 1 motor Radius trimming blade R2, manually adjustable Glue joint trimming blade with large roller, pneumatically controlled Hood locking mechanism CE marking Operating manual as a binder All insertable blades of the milling units and trimming blades have been replaced or re-sharpened, saws sharpened, and diamond joining cutters sharpened. The machine is therefore ready for immediate use. Only the diamond cutter of the profiling cutter has not been replaced, but is still sharp. Original paint, with only a few spots retouched. Dust extraction hoses renewed. Approx. 1200 operating hours, which is only 1/2 hour per day. Machine dimensions: approx. 4300 (with table) x 1250 x 1600 mm (LxWxH) Weight: approx. 950 kg. The machine can be demonstrated on-site by appointment. We only offer machines that are ready for demonstration and are in stock in our warehouse; see "other offers from this supplier".

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, workpiece height (max.): 40 mm, edge thickness (max.): 6 mm, feed rate X-axis: 11 m/min, rotational speed (max.): 12,000 rpm, Equipment: CE marking, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. feed speed: 11 m/min Maximum panel thickness: 40 mm Min. panel height: 8 mm Max. panel height: 40 mm Min. edge thickness: 0.3 mm Max. edge thickness: 6 mm Maximum spindle speed: 12,000 rpm MACHINE DETAILS Trimming unit Unit: Format cutting Unit: Trimming Automatic engagement by time Motor power: 2.2 kW Edge heating lamps Coil magazine Number of positions: 1 Gluing system Hot melt glue pot Edge pressure roller conveyor Number of pressure rollers: 3 Edge processing unit 1 Unit: End trimming Number of motors: 2 Automatic engagement by time Motor power: 0.18 kW Maximum speed: 12,000 rpm Edge processing unit 2 Unit: Top/bottom trimming Number of motors: 2 Motor power: 0.27 kW Maximum speed: 12,000 rpm Edge processing unit 3 Unit: Multifunction Number of motors: 1 Motor power: 0.35 kW Maximum speed: 12,000 rpm Dwedpsxw Ttvofx Aared Edge processing unit 4 Unit: Scraper Edge processing unit 5 Unit: Buffing Number of motors: 2 Motor power: 0.1 kW Total installed power: 13 kW EQUIPMENT Control system: PC 16 CE marking

Condition: used, Year of construction: 2007, Workpiece thickness: 8 – 50 mm Edge thickness: 0.4 – 3 mm (max. 3 x 30 / 1.0 x 55) Fixed lengths: max. 3 x 45 mm Feed rate: 11 m/min. Connected load: 10.5 kW Compressed air: 6 bar Dsdpfs Agli Njx Aarswd Weight: approx. 1250 kg Machine length: 3920 mm Storage location: Nattheim

Condition: used, Year of construction: 2007, functionality: fully functional, operating hours: 10,570 h, power: 15 kW (20.39 HP), type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, height adjustment type: mechanical, total length: 5,860 mm, overall weight: 2,700 kg, Equipment: CE marking, documentation/manual, Industrial BRANDT KDF 550C edgebander for sale, designed for the production of cabinet furniture. A reliable, industrial-grade model featuring a pressure belt; suitable for both: small workshops and larger-scale production. Features and Equipment: Automatic edge feeding Gluing unit (for EVA glue) Front and rear end-trimming saws Top and bottom milling units Corner rounding (two units – for faster processing) Scrapers Dsdpfx Aasz Smxuorewd Buffing/polishing unit Edge thickness: ~0.4–3 mm Panel thickness: up to ~50 mm Sprayers. Condition: Used, fully functional machine. Currently still in operation at a furniture workshop and available for inspection. Regularly maintained by UAB Lintera. We are the second owners—a small company. The machine has not been used for third-party contract work; it has been used exclusively for our own furniture production, operating on a single-shift basis. Price not includes VAT.

Condition: used, machine/vehicle number: 006710, Type of edging: Thin edge, Thick edge, Solid wood, Veneer Dwedjqy Em Topfx Aared Gluing System: EVA Hotmelt, Hot Air Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 11 m/min

Condition: excellent (used), SINGLE SIDE EDGE BANDER (RIGHT) Edges (band in rolls) thickness (Min/Max) mm 0,3/ 3 Edges thickness in stips / lippings (min/max) mm 0,4 / 8 Panels thickness (min/max) mm 8 / 60 Dwedjzyahxspfx Aarsd Numerical Control POWERTOUCH Feeding speed (adjustable) m/min 8 - 14 Top pressure system with rubber wheels Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) (2 x Kw 2,2) Lamps to heat the workpieces side Glueing Unit (Hot Melt Glue + Quick Melt system) QA65 N Edge coils supporting unit (reels N°) 1 Snipping (end-cutting) (2 x Kw 0,22) Fine Trimming unit (2 x Kw 0,55) Corners Rounding (contour trimming) (1 x Kw 0,35) Profile edge scraping unit MZ40 Glue scraping unit Buffing unit (2 x Kw 0,09)

Condition: used, Edge banding machine Brand: Brandt Model: Profiline KDF 670-C Hiflex Single-sided edge banding machine in right-hand design, for hot melt gluing. Quick-change gluing unit for hot melt glue. Processing with PU glue granulate possible in accordance with glue specifications. Leak-proof glue reservoir under the glue roller. Dwedpfx Aeynhwfearod Precise glue application to the workpiece with glue roller, no adjustment of workpiece thickness necessary. Glue roller with selectable rotation direction for counter or forward feed. Glue temperature monitoring via electronic thermostat. Automatic reduction of glue temperature during work breaks. Infrared heating for hot melt reactivation. Automatic edge banding magazine for roll material and fixed lengths, including roll plate with a diameter of 800 mm and reinforced cutting shears for thick PVC/ABS, max. 3 x 45 mm. Standard equipment with edge banding and workpiece – distance monitoring with optical display. Stable pressure zone with driven, compressed air-loaded main pressure roller and 3 free-running post-press rollers. Standard equipment with automatic central lubrication for the transport chain. Motor-driven adjustment of overpressure. Control panel at the machine infeed. Technical data Edge strip thickness: 0.4 – 12 mm Cutting tool: max. 3.0 x 45 mm or 0.8 x 65 mm Workpiece thickness: 8 – 60 mm Feed speed: 11 – 16 m/min (see below) When selecting edge banding thicker than 3 mm, the feed speed is automatically switched to 14 m/min. automatically to 14 m/min. When selecting form cutters, the feed rate is automatically switched to 11 m/min. Electrical connection: 400 V, 3-phase, 50 Hz Compressed air connection: 6 bar Connected load approx. 17 kW Machine length: 6,860 mm Full information about the machine can be found on our webpage burbagemaskin.se

Condition: excellent (used), Year of construction: 2010, I sell the fully equipped edge banding machine BRANDT Ambition KDF 650 C, year 2010: Configuration: Entry fence manual adjustable Premilling manual adjustable Edge banding EVA Material pressure zone manual adjustable End cutting saws pneumatic adjustable Tilting radius milling top + bottom servomotorical adjustable Corner rounding 2-motor manual adjustable Radius R2 scrapers pneumatic adjustable Glue scrapers manual adjustable Dedpfx Aeu E E D Dsarjwd Polishing brushes Control panel Power Control PC20 Working thickness adjustment servomotorical Material height 8 - 60mm Edge thickness 0,4 - 12,0 mm Feeding speed 11/14 m/min. Total length including feeding plate 5860mm Total weight 2600 kg With full Documentation and CE. Very good condition, fully working!

Condition: used, Year of construction: 2012, functionality: fully functional, premilling unit endtrimmer Dedps Airyajfx Aarewd multiprofilunit Ziehklinge Buffing up to 8 mm edge nc on infeed fence and pressure unit NC on multiprofil unit

Condition: excellent (used), Year of construction: 2017, I sell the fully equipped edge banding machine BRANDT KDF 230 AirTec, year 2017: Configuration: Dsdpfxjythxms Aarswd Entry fence manual adjustable Premilling manual adjustable Edge banding EVA glue / PUR glue possible / AirTec unit Material pressure zone manual adjustable End cutting saws pneumatic adjustable Tilting radius milling top + bottom manual adjustable Corner rounding 1-motor manual adjustable Radius R2 scrapers pneumatic adjustable ( set of R1 included) Control panel Working thickness adjustment manually Material height 8-60mm Edge thickness 0,4-3mm Feeding speed 10m/min. Total length including feeding plate 5070mm Very good condition, fully working! Including full documentation and CE. Available immediately.

Condition: used, Year of construction: 2014, edge thickness (max.): 12 mm, feed rate X-axis: 18 m/min, TECHNICAL DETAILS Workpiece Dimensions Min. panel height: 10 mm Max. panel height: 60 mm Min. panel width: 70 mm Min. edge thickness: 0.4 mm Max. edge thickness: 12 mm Max. feed rate: 18 m/min Feed and Guidance Pressure with idler rollers Panel support guides Unit for Panel Processing Pre-milling unit Automatically timed engagement Motor power: 2.2 kW Edge Gluing Edge roller magazine Glue reservoir for EVA hot melt adhesive Pre-melter for EVA hot melt adhesive Hot air system: AIRTEK Number of pressure rollers: 4 NC-controlled Edge Processing Units Number of edge processing units: 7 End-capping unit Number of motors: 2 Motor power: 0.35 kW Fine milling unit for flush trimming and rounding Number of motors: 2 NC-controlled Motor power: 0.55 kW Corner rounding unit Manufacturer model: WD60 Motor power: 0.35 kW Dodpfozmtivex Aarswd Rough milling unit Motor power: 3.5 kW Edge trimming unit NC-controlled Glue application unit Polishing unit Number of motors: 2 Motor power: 0.18 kW MACHINE DETAILS Control and Safety Machine programming software: PowerControl PC20 Safety standard: CE marking Electrical Data Total connected load: 22 kW EQUIPMENT Pre-milling unit Edge roller magazine Glue reservoir for EVA hot melt adhesive Pre-melter for EVA hot melt adhesive Hot air system AIRTEK 4 pressure rollers End-capping unit Fine milling unit for flush trimming and rounding Corner rounding unit WD60 Rough milling unit Edge trimming unit Glue application unit Polishing unit Spray unit Machine programming software PowerControl PC20

Condition: excellent (used), Year of construction: 2013, Brandt Highflex KDF 220 edge banding machine with joining, corner copying, and two trimming blades. Highly automated. A video of the machine in operation can be sent upon request. Edge thickness: approx. 0.4 - 3 mm, solid edge up to 6 mm Workpiece height: approx. 10 - 60 mm Feed speed: approx. 10 m/min Noise protection hood Extendable workpiece support Dust extraction connection: 1x120mm, 1x100mm, 3x80mm Easy-Touch control panel EC+ for easy operation of the machine 4 programs can be saved. Machine in Highflex design, highly automated, switching from thin edge to thick edge via programs Units: Extended infeed zone Chain track central lubrication, pneumatically manual Glue pot quick-change device, one glue pot currently installed Top pressure, manual adjustment, PU rollers Infeed guide, manual adjustment with SIKO counter for chip removal Jointing cutter with dia cutters, sharpened Contact heating shoe for preheating the board Gluing section with automatic edge feed for roll material up to 3 mm, switchable for forward and reverse operation Pressure zone with 3 rollers, pneumatic adjustment between thin and thick edge Dsdpfxjzzqwme Aarowd Cutting saw with 2 motors, straight cut or bevel cut (program adjustment) Combination milling unit, pneumatically controlled for flush trimming, chamfering, and rounding Corner rounding cutter R2 with dia cutter with integrated sensing ring Radius trimming blade R2, pneumatically retractable with quick-change device Joint trimming blade with large roller, pneumatically controlled Hood locking mechanism CE marking All indexable inserts of the milling units and trimming blades have been renewed or re-sharpened. Saws sharpened, dia jointing cutters sharpened. The machine is therefore ready for immediate use. Only the dia cutter of the profiling cutter has not been renewed, but is still sharp. Original paint, only a few spots have been touched up. The machine unfortunately does not have an operating hour counter, but it still looks very good. Very good condition, see original photos Machine dimensions approx. 4550 x 1250 x 1550mm (LxWxH) Weight approx. 1400 kg. The machine can be demonstrated on site after prior arrangement. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this provider".

Condition: used, machine/vehicle number: 006216, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 18 m/min Dodpfx Aaoy Nk Aherswd

Condition: excellent (used), Year of construction: 2015, I sell the fully equipped edge banding machine BRANDT Optimat KDF 440 C, year 2015: Configuration: Entry fence servomotorical adjustable Premilling manual adjustable Edge banding EVA glue / Airtec System Schugoma Material pressure zone manual adjustable End cutting saws pneumatic adjustable Dwedpfowun Irsx Aared Tilting radius milling top + bottom servomotorical adjustable Corner rounding 2-motor manual adjustable Radius R2 scrapers pneumatic adjustable Glue scrapers pneumatic adjustable Polishing brushes Cleaning fluid spraying front and back. Control panel Working thickness adjustment servo driven Material height 8-60mm Edge thickness 0,4-8mm Feeding speed 11m/min. Total length including feeding plate 5573mm Total weight 1860kg Only 592.198 Meters edgebanded. Very good condition, fully working! Including full documentation and CE. Available immediately.

Condition: excellent (used), Year of construction: 2014, I sell the fully equipped edge banding machine BRANDT Optimat KDF 220 C, year 2014: Configuration: Entry fence manual adjustable Premilling manual adjustable Edge banding EVA glue / PUR glue possible Material pressure zone manual adjustable End cutting saws pneumatic adjustable Tilting radius milling top + bottom manual adjustable Corner rounding 1-motor manual adjustable Radius R2 scrapers pneumatic adjustable ( set of R1 included) Control panel Working thickness adjustment servo driven Material height 8-50mm Edge thickness 0,4-3mm Feeding speed 10m/min. Total length including feeding plate 4150mm Total weight 1320kg Djdpfx Aaju N T Ewjrjwd Plus one additional glue tank included. Very good condition, fully working! Including full documentation and CE. Available immediately.

Condition: used, machine/vehicle number: 007251, Type of edging: Thin edge, Thick edge, Solid wood Dsdpfx Aetvrf Toarswd Gluing System: EVA Hotmelt, Hot Air Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 20 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr

Condition: ready for operation (used), Year of construction: 2005, machine/vehicle number: 0-261-07-1735, functionality: fully functional, operating hours: 4,600 h, input voltage: 400 V, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 12 mm, height adjustment type: electric, feed rate X-axis: 14 m/min, total height: 2,100 mm, total length: 6,900 mm, total width: 1,200 mm, overall weight: 3,500 kg, Equipment: documentation/manual, Name: BRANDT KDF 670 Highflex – edge banding machine Manufacturer: BRANDT Type: KDF 670 Highflex Year of manufacture: 2005 Machine available from: 2026-11-20 Machine condition: good Location: Kielce, Poland Technical data: Edge thickness: 0.4 - 12 mm Workpiece thickness: 8 - 60 mm Feed rate: 14 m/min Pre-milling unit: 2 x 2.2 KW Gluing unit: Quickmelt Edge magazine: for 1 roll Dwsdpfe Adzmzsx Aarjd Trimming unit: 2 x 0.35 KW Rough milling unit: 2 x 0.55 KW Profile milling unit: 2 x 0.55 KW Corner milling unit (copying): 2 x 0.35 KW Flat scraper (glue scraper): yes Radius scraper (profile scraper): yes Polisher: yes Control: PC16 Total power approx.: 15 KW Overall dimensions approx. (L x W x H): 6900 x 1150 x 2050 mm Weight approx.: 3500 kg Features: Software-controlled adjustment of the infeed fence Extension of the infeed fence by 300 mm Motorized adjustment of the upper pressure roller height Software-controlled adjustment of the pressure zone Automatic edge feeding Anti-adhesive spray Pneumatic adjustment for trimming at an angle/straight Pneumatic adjustment of the milling unit Software-controlled adjustment for edge thickness The machine has operated for very few hours – approximately 4600 (the computer disk was replaced after 2600 operating hours)

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Specification: Feed Speed 814m/min Workpiece Thickness: 8-60mm Edge Material Coil: 0.4-3mm Edge Material Strip: 0.4-8mm Joint Trimming 2x2.2kw Workpiece Pre heating EVA Gluepot Airtec Unit AT15 Edge Magazine Pneumatically Driven pressure Roller End Trim Unit Chamfer/Straight Top & Bottom Trimming Unit with Pneumatic Adjustment Contour Trimming Unit Djdpfx Aao Afxulsrowd Profile Scraping Unit with Quick Change Heads Glue Joint Scrapers Buffers CE

Condition: used, Year of construction: 2011, Gluing, edge banding, capping, combination milling, corner copying, pull blade. Dsdpfx Aozx Tlnjarswd Power consumption: 10 kW. Dust extraction: 1x 120 / 3x 60 / 1x 100 mm. Feed rate: 10 m/min. Workpiece thickness: 8 - 50 mm. Edge thickness: 0.4 - 3.0 mm. Roller separation: max. 0.4 - 3.0 mm x 45 mm. Working height: 950 mm. Dimensions: 4280 x 1300 x 2180 mm. Weight: approx. 1400 kg. Storage location: Nattheim.

Condition: used, Year of construction: 2016, Power Touch control (touch screen system) with 21" full HD video Panel height 60 mm Pvc/Abs 3 mm Solid wood up to 12 mm Feed speed up to 20 m/min Working height electronically adjustable by N.C. Panel support guide with idle routines Side roller conveyor with idle wheels for panel support Anti-adhesive group Two-motor rectifier group Roll holder plate EVA glue gluing group with pre-melting unit and glue pot Edge pressure group on straight profiles with pressure rollers automatically adjustable by numerical control End trimming group with automatic inclination adjustment Two-motor chamfering group with adjustment 2-motor multifunction rounding group (chamfering + rounding) Edge scraping group with electronic adjustment by numerical control Glue scraping group Brush group Anti-adhesive group Dedpfxjwwtpys Aarewd

Condition: excellent (used), BRANDT KDF 440 edger, well-equipped, CNC-controlled units operated from the control panel Liquids Pre-routing cutters Plate heating Glue application by roller Exchangeable tank Pneumatic preliminary guillotine Pressure rollers Trimming knives for final trimming Multi-routing unit, top and bottom, R1-R2 Corner rounding unit, R1-R2, pneumatically switchable Multi-profile edger, R1-R2 Flat edger Liquids Dwsdpe Af Uzaofx Aared Polisher Max. part height 60 mm Max. veneer thickness in roll 3 mm Feed rate max. 14 m/min with corner rounding 8 m/min Very good condition for a used machine Original mileage 400,000 meters

Condition: excellent (used), BRANDT KDF 340 edge banding machine - used Manual, self-clamping pressure bridge adjustment, Dwsdpfez Ea Dzsx Aared Feed via transport chain, Workpiece support is retractable, Diamond jointing cutter for both forward and reverse rotation, Glue reservoir located underneath, Standby function, Miter saw with 2 HF motors, Miter saw is swiveling, Edge trimming/radius chamfering unit, Milling tools with carbide insert blades, Radius pulling blade, Chip collection box for radius pulling blade, Air nozzle on the radius pulling blade ----- Technical data ----- Edge thickness, roll material: 0.4-3 mm, Edge thickness, strip material: 0.4-3 mm, Workpiece thickness: 50 mm, Min. workpiece length: 250 mm, Feed speed: 9 m/min., Distance workpiece support: 400 mm, Support plate Ø for edge material: 810 mm, Dimensions jointing cutter: 100x62x30 mm, Dimensions miter saw blade: 100x2.6x32 mm, Cutting blade for roll material up to: 3 mm, Warm-up time: 17 min., Power jointing cutter: 2x2.2 kW, Power miter saw: 2x0.18 kW, Power milling station: 2x0.27 kW, Power chamfering unit: 2x0.09 kW, Dust extraction nozzle Ø jointing cutter unit: 120 mm, Dust extraction nozzle Ø milling unit: 100 mm, Dust extraction nozzle Ø pulling blade unit: 100 mm, Compressed air connection: 6 bar, Overall length: 3,550 mm, Dimensions (L x W x H): 3,550 x 1,250 x 1,450 mm Quality information: - All settings checked - Adjusted according to manufacturer's specifications - Complete basic inspection - Complete basic cleaning - Electrical system checked - Pneumatic system checked - Ready for immediate use