Used Brandt kd 83 for sale (112)

edgebander Brandt kd 68 , parts

total length: 5,000 cm, total width: 170 cm, edge thickness (max.): 12 mm, total height: 170 cm, overall weight: 1,700 kg, Condition: good (used), Year of construction: 1994, Machine number: 0-261-03-5533, Technical data Year of manufacture 1994 For edge thickness 0.4 to 12 mm Workpiece thickness 10-55 mm Workpiece length min. 160 mm Workpiece width min. 65 mm Dmv9uv Caps from roll thickness 0.8 to 60 mm height Capping from roll thickness 3 mm to height 45 mm HF cross-cut saws, tiltable HF- Radius milling, flush milling, swiveling Radius scraper Polishing station Feed rate 13 m/min Line control LWH 5.00 x 1.70 x 1.70 meters 400 V Suction nozzle D 180 mm

more

Listing

Brandt kd 68 , parts Brandt kd 68 , parts

Skopje

9,166 km

Brandt kd 68 , parts Brandt kd 68 , parts

Call

Condition: used, Year of construction: 2000, Machine parts from Edgebander Brandt kd 68 , Liyvkju8t7 complete end trimming unit , complete trimming unit , polishing unit , glue scraping unit , complete electronics , pneumatic , Sensors , encoder , Inverter KEB , Pads , etc ..... We can send evrywhere in Europe and abroad ....

more

Listing

Sankt Peter im Sulmtal

(dealership location)

1,266 km

edge banding machine

BRANDT KD 84

Call

Condition: used, Year of construction: 1985, edge thickness 0,4 - 12 mm work piece thickness 10 - 55 mm work piece length min 160 mm 3dt30mwyf work piece width min 65 mm feed speed 13 m/ min compressed air 7 bar machine length 5420 mm weight 1950 kg glue pot with quick melt system glue application roller wit left and right turning edge magazine for PVC and strips motor height adjustment for pressure beam pneumatic pressure rollers for edge magazine control panel, rotatable all aggregates in-line controlled cutting milling combination with 2 aggregates, 1st aggregate straight, 2nd aggregate radius and phase milling tool draw blade buffing unit central lubrication for transport chain quick change system edge control system with error msg IR heater CE Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

more

Listing

Barntrup

7,744 km

Kantenanleimmaschine mit Fügen

BRANDT KD 56

Call

total length: 3,100 cm, Condition: ready for operation (used), Year of construction: 1996, Functionality: fully functional, Single-sided edge banding machine in right-hand version for hot melt adhesive gluing. Gluing section for hot-melt adhesive granulate. Glue supply below the glue roller. Glue application to the workpiece by means of a glue roller in synchronized and counter-rotation. Electronic glue pot temperature control. Automatic edge magazine for roll material and fixed lengths, incl. roll separating device and roll plate Diameter 800 mm Pressure zone with pneumatically driven main pressure zone and Special holding pressure roller for compressing the upper and lower glue joint Centrally adjustable top pressure Central manual chain conveyor lubrication Pivoting control panel at the machine infeed Cross-cut saw unit for front and rear edge overhang. High-precision linear guide. 2 motors each 0.18 kW, 200 Hz, 12,000 rpm, pulling cross-cut for high accuracy. Swivel range straight to bevel cross-cuts 0-15 degrees Flush trimming unit top and bottom with vertical and horizontal horizontal tracing 2 motors each 0.27 kW, 200 Hz, 12,000 rpm Scraper unit for PCV edges Scanning from above, below and sideways, for chamfering and rounding of pre-milled PVC edges. Edge thickness max. 3 mm, Buffing unit 2 motors for smoothing the edges at the top and bottom. 2 motors 0.09 kW each, individually suspended, inclined and height-adjustable Static frequency converter 200 Hz Electronic motor brakes for snipping and trimming unit Pozbzddmw Workpiece support extendable to 350 mm Noise protection cladding incl. central extraction nozzle diam. 100 mm Electrical equipment with modular control system for simplified service. Permissible ambient temperature min. +5°C / max. +35°C If the mains voltage fluctuates by more than +/- 10%, a voltage stabilizer must be installed. Workpiece thickness 8 - 40 mm Workpiece width min. 60 mm Workpiece length min. 140 mm Edge thickness: * Fixed lengths 0.4 - 3.0 mm (max. 3 x 45 mm) * Roll cutting 0.4 - 3.0 mm (max. 3 x 30 mm / 0.8 x 45 mm) Feed rate approx. 9 m/min. Electrical 400 V, 3 phase, 50 Hz Connected load 3.8 kW Compressed air connection 6 bar Weight approx. 860 kg Machine length approx. 3,075 mm

more

Listing

Nattheim

(dealership location)

8,019 km

Brandt KD 88 FQ Optimat

Call

Condition: used, Year of construction: 1996, Machine number: 0-261-03-710, Kantendicke : 0.4 - 12 mm Rollenkante : 3 x 45 mm bzw. 0.8 - 60 mm Werkstückbreite min. : 65 mm Werkstücklänge min.: 160 mm Werkstückdicke : 10 - 55 mm Vorschub : 13 m/min Vorfräsen ( Fügen ) Leimbecken Quickmelt Verleimteil Kappen Bündigfräsen Fasefräsen Radiusfräsen Eckenkopieren Flachziehklinge Schwabbelaggregat Maschinenmaße: 7450 x 1220 x 2400 mm Gewicht : 3000 kg Cexut7diza Lagerort: Nattheim

more

Listing

Barntrup

7,743 km

Edge bander

Brandt KD 86

€3,800

Call

Condition: good (used), Edge bander Brandt type: KD 86 year of manufacture: 1993 for veneer material thickness up to 12 mm glueing from the roll up to 3 mm with pneumatic clipping station glueing application unit with Quickmelt-container solid built pressure zone with 4 rolls clippping for for front and back router station flush, chamfer Curojhl second router station radius R 3 mm corner copying radius spoke shave R 3 mm wood dust collecting box ploshing station pneumtic package for polishing station extendable support bar for big parts operators panel in head height space need approx. 6100 mm

more

Listing

Albaching

8,169 km

edge banding machine

Brandt KD 99F

Call

Condition: used, Year of construction: 1999, Machine number: 0-261-03-9167, Edge banding machine Brandt KD 99 F Year of construction 1999 Condition: used, works Available from: probably February 2024 Machine no. 0-261-03-9167 Suitable for: ABS/PVC edges Solid edgebands up to approx. 20mm Component height max. 60mm Equipped with: - Jointing cutter unit - Cutting unit - Flush milling unit - Radius milling unit for 2mm - Corner copying unit (2mm edges) - 2 sets of radius scrapers (1mm and 2mm) - Surface scraper - buffing wheel - Heat gun - Riepe nozzles (cleaning and coolant with antistatic) - Two glue basins (suitable for EVA and PU glue) C9x0nx3 Machine length approx. 8m

more

Listing

Bad Sooden-Allendorf

7,837 km

Brandt KD 84

Call

Condition: used, Year of construction: 1994, Machine number: 0-261-03-4777, Glue roller Printing unit cross-cut unit 3130, swivelling, 2 x 0,35 kW trimming unit 2 x 4130, swiveling 1. aggregate - combination radius/straight line 2. aggregate - chamfer scraper 5705, radius up to 3 mm buffing aggregate 5380, 2 x 0,18 kW Power supply 400V 9kW Compressed air connection 6 bar suction connection 1 x 180 mm weight approx. 1950 kg workpiece thickness 10 - 55 mm workpiece length min. 160 mm workpiece width min. 65 mm edge thickness 0,4 - 12 mm Jffyzpp roller cutting 3 x 45 or 0,8 x 60 mm feed rate 13 m/min

more

Buy-it-Now

Brandt KD 84

€2,700

Edgebander BRANDT OPTIMAT KD 68 CF

Condition: not inspected (used), Year of construction: 1994, glue roller, pressure unit, cross-cut unit 3130 swivelling 2x0,35 kW, milling combination 2x4130 swivelling - 1. unit combi radius/straight - 2. unit chamfer, scraper 5705 radius up to 3mm, buffing unit 5380 2x0,18kW, power connection 400V 9kW, compressed air connection 6bar, suction connection 1x180 mm, weight approx. 1950kg, workpiece thickness 10-55mm, workpiece length min 160mm, workpiece width min 65mm, edge thickness 0,4-12mm, roller cutting 3x45 or 0,8x60mm, feed13 m/min - as taken back by customer Bvo8d38ic7

more

Listing

Miechucino

8,056 km

BRANDT OPTIMAT KD 68 CF

Call

Condition: ready for operation (used), Year of construction: 2001, Edgebander BRANDT OPTIMAT KD 68 CF - year of production 2001 - DTR TECHNICAL SPECIFICATIONS: machine tool adapted to the processing of PVC / ABS edges veneer up to 3 mm thick and wooden sticks up to 9 mm thick pre-cutter - plate milling tape pressure glue tank, hot melt glue granules, additional glue application roller heated strip of tape guillotine - pre-cutting of the veneer 3 pressure rollers 2 ready-to-cut ball crushing units 2 milling aggregates for edge shaping (radial milling cutters) an aggregate for making corners (milling) sanding units - for removing excess glue polishing aggregates max. workpiece thickness 50 mm min. workpiece width 60 mm min. element length 160 mm feed speed 96 m / min total power 10.8 kW diameter of the extraction port 120 mm dimensions (length / width / height) 5700/1200/2100 mm Bllgckho weight 2000 kg

more

Listing

Nattheim

(dealership location)

8,019 km

Kantenanleimmaschine

Brandt KD 76

Call

Condition: used, Year of construction: 1991, Machine number: 0-260-03-176, Lagerort: Nattheim Brosenegg

more

Listing

Nattheim

(dealership location)

8,019 km

Kantenanleimmaschine mit Fügen

Brandt o KD 69/2 CF

Call

Condition: used, Year of construction: 2002, Machine number: 02-261-07-04, Maschinenlänge: 6240 mm Gewicht: 2400 kg Anschlusswert: 14 kW Itue7ngzq Absaugdurchmesser: 120 / 140 mm Lagerort: Nattheim

more

Listing

USA

0 km

BRANDT KDF 1440C AMBITION

Call

Condition: used, Machine number: 005832, Type of edging: Thin edge, Thick edge, Solid wood, Veneer Gzbdmg Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 11 m/min

more

Listing

Åkervägen 18, 696 32 Askersund, Sweden

7,593 km

edgebander

Brandt KDF 650

€16,000

Brandt Optimat edge banding

Call

Condition: good (used), Year of construction: 2008, Machine number: 0-261-08-0754, Edgebanding machine Brandt Type: KDF 650 Serial no: 0-261-08-0754 Year: 2008 Edgebanding equipped with: Pre-milling, cutting unit, fine milling unit, corner rounding unit, profile scraper glue scraper, polishing unit. Note ! The return conveyor system is not included Techn data: Machine control PC 2X Pree milling unit Magazine Roll cutting unit strip from roll, edge material height 65mm, thickness 3mm Glue aggregate, quick melt, granulates Reactivation unit IR laser Pressure zone Cutting unit adjust the overhang Milling unit above, below Form milling unit corner rounding Profile scraper Glue scraper Polishing units Edge material PVC 3mm Edge material wooden strips 12mm Edge material Melamine 0.4mm Electrical connection 400 volts, 3 HP, 50 Hz, 16kw Compressed air 6 bar, connection 1/2" Air consumption approx: 160NL/min Extraction nozzles 2x100mm, 790m3/h, 1x120mm, 1140m3/h Air speed 28m/sec Machine size: According to picture attached Weight: 2600 kg Cx0l397la Stock no: 2001853BXA

more

Listing

D - Nordrhein-Westfalen

7,694 km

Brandt Optimat KDF 220 C

Call

Condition: used, Year of construction: 2009, Second hand machine Year of manufacture 2009 single sided edge banding machine in right hand version for hot melt gluing contact heating shoe for workpiece preheating Gluing section for hotmelt granules Glue supply underneath the glue roller glue application to the workpiece by means of glue roller electronic glue pot temperature control automatic edge magazine for roll material and fixed lengths pressure zone with driven main pressure roller as well as two holding pressure rollers centrally adjustable top pressure central manual chain lubrication control panel at the machine infeed Cfgniv27nd Noise protection cladding with 3 suction nozzles centrally located above the aggregates each 60 mm diameter Electronic control easy control EC 10+ integrated line control for contactless control of machining functions edge thickness fixed lengths 0.4 - 3 mm max. 3 x 55 mm roller cutting 0.4 - 3 mm max. 3 x 45 mm/ 1.0 x 55 mm Feed rate approx. 10 m/min. Connected load approx. 10 kW Pneumatic connection 6 bar Total length 4280 mm Infeed ruler adjustable in connection with joining part Joining milling unit 2 x 2,2 kW; 2 motors (1 x synchronous- 1 x counter-rotation) suction hood 120 mm trimming unit chamfer/straight 2 x 0.1 8 kW for trimming the front and rear edge protrusion Milling unit 2 x 0.27 kW for milling the upper and lower edge protrusion motors can be manually swivelled between flush and radius milling Shape milling unit top and bottom 1 x 0.35 kW for shape milling of head edges workpiece thickness max. 40 mm scraper unit ZK 6520 for chamfering or rounding of pre-milled PVC edges Surface scraper VKNR 5780 for removing adhesive residues in the area of the glue joint availability: short term

more

Listing

Medea

8,399 km

Edgebander

BRANDT KDN 210 AMBITION 1210

Call

Condition: good (used), Year of construction: 2016, Edgeband thickness max 3 mm Edgeband height max 55 mm Thickness of coiled edgeband max 3 mm Workpiece width min 70 mm Feedrate max 11 m/min Preheating zone Glue system granulate glue pot below feeding chain Quick-change glue pot Trimming saw 2 motors Flush/radius/chamfer milling units 1 Scraper unit Profile scraper Lvhhzdrr2t Buffing unit Magazine for single strips Aggregates actuated by control pneumatic Type right-side machine Quick-change aggregate(s) Machine length 3.507 mm BRANDT A 3 Gluing unit Control BRANDT EASYTOUCH Weight 700 kg CE marking

more

Listing

Hüllhorst

7,697 km

Brandt KDF 220

Call

Condition: reconditioned (used), Year of construction: 2011, Joining, gluing, snipping, flush sawing, radius milling, rounding corners, scraper, pneum. Insert control - integrated line control for contactless control of processing functions. Max. Feed rate 11m/min Dimensions 4400 x 1350 mm Weight 1300 kg Maximum panel thickness: 60 mm Max. Feed 11m/min Bgqjogp90vm

more

Listing

Blučina

8,364 km

edgebander

Brandt KDF 440 C

€24,000

EXW Fixed price plus VAT

Call

Condition: reconditioned (used), Year of construction: 2011, Machine dimensions (LxWxH)...5,3x0,9x1,7m Edge thickness...0,4-8 mm Panel thickness...8-60 mm Panel width....min. 70 mm Variable feed speed..8-14 m/min. Weigh of the machine...1,8 t Aggregates: Joint trimming unit - dia tools Edge (coil+strips) magazine Quickly changeable glue application unit D7s2dcc Pressure zone - 1+2 rollers End trimming unit pneumatical tiltable 0-10 Trimming unit - R2+flat Corner rounding unit MF50 (lineal motors) - 2 motors, dia tools, adjustment via servos Profile scraping unit, quickly changeable system, basic set R2 and as a aditional set R1 included Flat scraping unit Buffing unit

more

Listing

USA

0 km

BRANDT KDF 1440 HIGHFEX

Call

Condition: used, Machine number: 005793, Type of edging: Thin edge, Thick edge, Solid wood, Veneer Ic23wxoqe Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 11 m/min

more

Listing

Barntrup

7,743 km

Edge Banding Machine

Brandt Optimat KDN 330

€5,500

FCA ONO plus VAT

Call

Condition: not inspected (used), Year of construction: 2003, Edge Banding Machine make Brandt type Optimat KDN 330 year of manufacture 2003 compact, single-sided edge banding machine Dl77wh glue thickness 3 mm thickness of roll material max. 3 mm gluing unit trimming unit flush trimming unit 400 V, 50 Hz, 16 A total connected load approx. 4 kW machine length approx. 3200 mm

more

Listing

Baden-Württemberg, Deutschland

7,969 km

Zero joint edgebanding machine

Brandt KDN 210

Call

Condition: used, Year of construction: 2006, Used machine Year of construction 2006 S2t8l gluing up to 3 mm, also solid wood Gluing unit with glue pot and glue roller cross-cut with 2 motors; high precision due to pulling cut and linear guide Multifunctional trimming unit Drawing blade unit Modern line control precise and robust chain track and feed chain feed speed 9 m/min Workpiece thickness 8 - 50 mm Edge thickness 0.4 - 3 mm Roll cutting max. 3.0x45/1.0x55 mmm Machine length 3450 mm connected load 3.5 kW Pneumatics 6 bar Suction diameter 3 x 60 mm Weight 800 kg Availability: short term Storage location: Hochheim

more

Listing

Klipphausen

8,048 km

BRANDT KDF 860 C Edition

Call

Condition: good (used), Year of construction: 2015, Special equipment Suitable for nesting Edgeband thickness max 12 mm Edgeband height max 66 mm Thickness of coiled edgeband max 3 mm Workpiece width min 70 mm Feedrate max 20 m/min Continuously variable feed Electromotoric height adjustment Top pressure by belt Preheating zone Zero joint Hot air Glue system granulate Premelting unit Suitable for PUR glue Spraying device Premilling unit Trimming saw 2 motors Flush/radius/chamfer milling units 1 Mkqqme Corner rounding unit 2 motors Scraper unit profile and flat Buffing unit Magazine for single strips Aggregates actuated by control NC-axes Type right-side machine Machine length 6.560 mm BRANDT AT 15 airTec BRANDT airTec BRANDT A 12 Gluing unit BRANDT QUICKMELT QA 45 BRANDT | HOMAG MS 40 Multifunctional trimming unit BRANDT MF 60 SERVOTRIM BRANDT | HOMAG MZ 40 Multistage profile scraping unit BRANDT Automatic edge feeding device Control Homag powerTouch CE marking

more

Listing

Wadowice

8,458 km

Edge Bander

Brandt KDF44 HIGHFLEX 1440

€37,000

Call

Condition: reconditioned (used), Year of construction: 2013, Machine after complete reconditioning FUSING UNIT 2 X 2.2 KW 200 HZ FUSING UNIT A8 Cns8nzxj MILLING UNIT INCLINED/STRAIGHT 2 X 0.18 KW PNEUMATIC ADJUSTMENT MILLING UNIT INCLINED/STRAIGHT MILLING UNIT 2 X 0,55 KW 0 DEGREE PNEUMATIC ADJUSTMENT 2 POINTS MULTIFUNCTIONAL FORMING UNIT 2 X 0.4 KW PROFILE SCRAPER WITH QUICK-CHANGE HEADS PNEUMATIC ADJUSTMENT GLUE JOINT SCRAPER CLEANING UNIT

more

Listing

Warburg

7,775 km

Brandt-Homag KDF 650

€31,000

Call

total length: 5,000 cm, total width: 1,500 cm, Condition: excellent (used), Year of construction: 2008, Operating hours: 5,000 h, Machine number: 0261-07-4651, Brandt KDF 650 edge banding machine Complete production line for furniture and carcase parts, including solid wood parts and worktops with connected return. For fast and flawless complete production. All edge types can be known. Whether ABS, laminate or solid wood edging. Used edge banding machine currently in operation. Fully equipped with tools. Ready for immediate use. 100% reliable and really very good quality. A second glue tray is available for quick and uncomplicated changing of the glue color. Regular maintenance and checks are carried out constantly. No maintenance backlog! One-man operation possible thanks to the integrated/connected return system. For fast, uncomplicated production / operation. Dmp7gp The machine is fully functional and delivers top quality. It can be demonstrated / viewed at any time. Takeover possible by arrangement at the turn of the year. The sale is without warranty. All information in the item description is non-binding. Detailed information on the condition, functionality, equipment, dimensions, etc. can be obtained during a personal inspection.

more

Listing

USA

0 km

BRANDT KDN 220 C

Call

Condition: used, Machine number: 005873, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Ce7jmrjy9s Corner Rounding Unit: yes

more

Listing

Saerbeck

7,646 km

Brandt KDF 210

Call

Condition: excellent (used), Year of construction: 2009, Edge banding machine Manufacturer: Brandt Type: KDF 210 Year of manufacture: 2009 edge thickness: 04 - 3 mm workpiece thickness: 8 - 50 mm feed rate: 10 m/min power: 9 kW weight: approx. 1.100 kg Jfgjlyh Machine length: 3.780 mm Joining unit: Yes Crosscut saw unit: Yes Flush milling unit: Yes Radius scraper: Yes Surface scraper: Yes

more

Listing

Åkervägen 18, 696 32 Askersund, Sweden

7,593 km

Edgebander

Brandt Optimat KDF 350C

€9,500

Call

Condition: good (used), Year of construction: 2004, Edgebanding machine Brandt Type:KDF 350C Serie no:0-261-04-3670 Year:2004 Equipped with:Pre-routes- corner rounding unit-scrapers etc The machine got a factory new gluepot and its included a lot of new spareparts. Techn info: PC control Pre-milling Edge feed Glue application Pressure unit Cutting Trimming Corner rounding Scrapers Buffing Material thickness 8-50mm F80hjuoj7 Edge thickness 0,4-3mm Feeding speed max 11m/min Power 400 volt, 50 Hz, 3 fas, 10,5kw Airpressure 6 bar Weight 1250kg Machine length 3920mm Stock no:2001784BXA

more

Listing

Szymbark

8,562 km

Edgebander

Brandt KDF 440 HIGHFLEX 1440

€39,500

Call

Condition: excellent (used), Year of construction: 2016, Brandt KDF 440 HIGHFLEX 1440 Year of manufacture: 2015 Technical specifications - Edgeband thickness max: 8 mm - Edgeband height max: 66 mm - Thickness of coiled edgeband max: 3 mm - Feedrate max: 14 m/min - Continuously variable feed - Electromotoric height adjustment - Preheating zone - Glue system granulate - Premelting unit - Quick-change glue pot - Premilling unit - Trimming saw: 2 motors - Flush/radius/chamfer milling units: 1 Dmuzxr - Corner rounding unit: 2 motors - Scraper unit: profile and flat - Buffing unit - Magazine for single strips - Aggregates actuated by control: NC-axes - Type: right-side machine - Quick-change aggregate(s) - Machine length: 5.570 mm - BRANDT PU top pressure rollers - BRANDT A 8 Gluing unit - Control: BRANDT POWERTOUCH 2 - CE marking

more

Listing

Pinggau

8,446 km

Brandt KDF 440 C

Call

total length: 530 cm, edge thickness (max.): 8 mm, Condition: excellent (used), Year of construction: 2012, Pre-milling, workpiece pre-heating, capping, radius and flush milling, corner copying, radius scraper, surface scraper, buffing Bhd7v7mxk9c Release agent at the infeed, cleaning agent at the outfeed

more

Listing

Křečkov

8,198 km

BRANDT KDN 630

€7,000

Call

Condition: refurbished (used), Year of construction: 2005, - Working thickness up to 60mm - edge thickness max 3mm rolls, 12mm strips - gluing - caps - milling unit - scraper - buffing 8haq0nubyk

more

Listing

United Kingdom

6,838 km

BRANDT KDF 1230 AIRTEC AMBITION

Call

Condition: used, Machine number: 006282, Type of edging: Thin edge, Thick edge, Solid wood, Veneer Gluing System: EVA Hotmelt, Hot Air Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 8 m/min 2vfac Maximum panel thickness: 40 mm

more

Listing

Saerbeck

7,646 km

Brandt KDF 350 C

€11,300

Call

Condition: excellent (used), Year of construction: 2004, Edge banding machine Manufacturer: Brandt Type: KDF 350 C Year of construction: 2004 Operating hours: approx. 1.150 h edge thickness: 0,4 - 3 mm workpiece thickness: 8 - 50 mm Sx09ww power: 10,5 kw feed rate: 11 m/min total length: 3.920 mm weight: approx. 1.250 kg Joining unit: Yes Cross-cutting unit: Yes Radii - flush milling unit: Yes Corner copying unit: Yes Radius scraper: Yes Buffing unit: Yes

more

Listing

Moneymore

6,680 km

edgebander

Brandt KDF 1660 Profiline

Call

Condition: excellent (used), Year of construction: 2011, • Feed Speed 8-18m/min • Workpiece Thickness 8-60mm • Edge Coil 0.4-3mm • Edge Strip 0.4-15mm • Pre-Milling 2X2.2kw • Pre-Heating Unit • Quickmelt Application Unit • Quickmelt Pre-Melter Epz2rbiy • Pressure Zone with motor driven adjustment • End Trim Unit • Pneumatic adjustment End Trimming Chamfer / Straight • Pneumatic 2 Point Adjustment End Trimming • Rough Trimming Unit 2X0.55Kw • Pneumatic adjustment Trimming Unit • Pneumatic 2 Point Adjustment Flush or Overhang • Trimming Unit 2X0.55Kw Synchronism • Pneumatic 2 point adjustment • Program adjustment – Lateral sensing • Program adjustment to edge thickness • Multifunctional Contour Trimming Unit 2X0.35Kw • Profiule Scraping unit – Quick Change heads • Pneumatic adjustment profile scraping unit • Glue Joint Scraping Unit • Buffing Unit • PC 20 • Optimised Workpiece Gaps • V-Belt Top Pressure Belt • Separating Agent Spray Device • Detergent Spraying Unit • Automatic Edge Infeed Device • Multiple Roller Sensing Fine Trimming Unit • Multiple Roller Sensing Rough Trimming Unit • Special Sensing for Scraping Unit • Interface for Ligmatech ZHR05 Return System not included.

more

Listing

Schweiz

8,020 km

Edge banding

Brandt Profiline KDF 690

€45,000

Brandt O KDF 530 C edge banding machine

Call

Condition: reconditioned (used), Year of construction: 2009, The machine was completely overhauled by Homag Switzerland - new chain plates, belt top pressure and all wear parts. Control: powerControl PC20+ CE-sign: available Total length 7760mm Feed rate: 8 -18m/min, infinitely variable Height adjustment: motorised Workpiece thickness: 8 - 60 mm Joining unit: (twin motor) Gluing unit: A12 (PUR hotmelt) - Preheating: available - Glue premelter Robatech - Infrared emitter Pressing zone: 1 driven prepress roller, 3 pressure rollers Cross-cut unit: chamfer/straight (two motors) Pre-milling unit Milling unit Grooving unit swivelling Shape trimming unit Flush milling with multiple roller scanning Finishing unit: profile and surface scraper Finishing unit: release agent, cleaning, buffing unit Xn0ff9t

more

Listing

Blomberg

7,744 km

Brandt KDF 530 C

Call

Condition: excellent (used), Year of construction: 2008, with zero joint edge banding unit from Schugoma - Edge thickness, rolls 0.4 - 3.0 mm - Edge thickness, strips 0.4 - 8 mm - Roll separation 3 x 45 mm / 0.8 x 55 mm - Right execution - Feed up to 11 m/min - feed up to 14 m/min (without form cutter) - Parts preheating - Adjustable infeed ruler - Joint milling unit FG3500, 2 x 2.2 kW 200 Hz - Direct application of glue to the workpiece - Granulate glue system - Quick change glue pot - Cross-cut saw unit HL6130, 2 x 0.18 kW 200 Hz - Front and rear capping 0 - 15 degrees - Electro-pneumatic adjustment straight / chamfer - Milling unit BF6240, 2 x 0.55 kW 200 Hz - Form milling unit FF6210, 0.35 kW 200 Hz - Electro-pneumatic process of the form trimming unit - ZK6520 scraper unit - Electro-pneumatic movement of the scraper unit - Flat scraper unit - Buffing unit FP6810, 2 x 0.18 kW 200 Hz - Control type Power Control PC20+ - track control - Chain plate transport unit - Central lubrication - Extraction connection 1x120 mm, 3x60 mm, 1x100 mm Fzev0pg

more

Listing

Naujosios Kietaviškės

8,339 km

Single sided banding machine Brandt KD86

Brandt KD86

€6,500

EXW Fixed price plus VAT

Call

Condition: good (used), Year of construction: 1996, Machine number: 0-261-03-7162, Single sided edge banding machine in right hand execution for hot melt gluing. Max speed 13m/min Edging material thickness 0,4-12mm Strips/lippings 3x45mm Band 0,8x60mm Glue aplication Drive - ac motor freguency 50/60Hz Voltage 230..460V Bfwgihgtenu Rating 0,12kW Rotational speed 60Hz 1380e.p.m - 1655r.p.m Capacity of granulate container +-3kg Melting capacity app. 6-10kg/h.

more

Listing

United Kingdom

6,838 km

BRANDT KDF660GC HIGHFLEX

Call

Condition: used, Machine number: 006216, Type of edging: Thin edge, Thick edge, Solid wood, Veneer Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Ci29hzx8ob Max feed speed: 18 m/min

more

Listing

Wielgolas

8,412 km

Brandt optimat KDF 350 C

€16,600

Call

Condition: ready for operation (used), Year of construction: 2007, The machine is equipped with the following aggregates: Pre-milling of the plate - 2 aggregates with a power of 2,2 kW each ,electro-pneumatic control Glue application unit with a roller- co-rotating and counter-rotating gear - magazine for edging rolls, with cutting knife. Drip saws( 2 motors of 0,18 kW each) with chamfer or straight - pneumatic control. Ehqdvhd2s Rough milling (2 motors of 0.27 kW each). Radius or chamfer milling/corner copying - tip rounding motor 0.35 kW pneumatic override Profile cycline - pneumatically adjustable Polisher Electronic control PC 16 also in Polish Control via color display Board thickness from 8 - 50 mm Veneer thickness from 0.4 - 3 mm Cutting from a roll max 3x30 mm/1x55 mm Feed rate 9m/min Glue granular tank Warming up time to 200 degrees C about 10 min Connecting power 10 kW Machine dimensions L x H x W 3900 x 1370 x 620 (110 with magazine )mm weight: 1200 kg

more

Listing

Schwäbisch Gmünd

7,986 km

Edge banding

Brandt KD68

€3,000

Call

Condition: excellent (used), running direction of the board : from operator to the left side max. glueing thickness :0,4 - 5.0 mm workpiece width : min. 60 mm workpiece length : min. 160 mm feed speed : 11 m/min heating time : 8 min roll magazine : yes I0dzgmgch Cross cut shear up to : 3.0 mm Gluing : Glue tank with granules Crosscut saw : Yes Edge magazine for roll material and fixed lengths Combination unit flush/chamfer/radius : manually adjustable Aggregate display : mech. numerical display Control mode : via limit switch Operation : selector switch/ push buttons Extendable roller support : Yes protective hood : yes max. workpiece thickness : 10 - 55 mm weight approx. : 1000 kg dimension : 3800 x 1000 x 1600 mm motor power : 5 kW The machine is fully functional and in good condition for its age, a buffing motor is broken, this I would still repair. The transport chain is unfortunately missing a few links, but works even so. A few years ago I wanted to order this, the links were also not expensive, but it also works like this. All compressed air hoses are renewed. All solenoid valves work, as well as all contactors, a multifunction contactor is still there as a spare part. We also used PUR glue with this machine, I can explain how that works. We have decided to buy a new machine and therefore sell it. We can load the machine with a forklift, for this we need 1 week before an appointment.

more

Listing

United Kingdom

6,838 km

BRANDT KDF 1230 AMBITION

Call

Condition: used, Machine number: 006458, Type of edging: Thin edge, Thick edge, Veneer Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 11 m/min Gkm89w Maximum panel thickness: 50 mm

more

Listing

DE

7,870 km

BRANDT KDF 1670 AMBITION

Call

Condition: used, Machine number: 006412, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Premilling Unit: yes D7rlj2w Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 18 m/min Maximum panel thickness: 60 mm Operating Units: 9 nr

more

Listing

United Kingdom

6,838 km

BRANDT KDF 650 C

Call

Condition: used, Machine number: 006575, Type of edging: Thin edge, Thick edge, Solid wood, Veneer Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 14 m/min E2lykpe

more

Listing

Italy

8,629 km

BRANDT KDF 220

Call

Condition: used, Machine number: 006377, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes 8u8ia97w0i Max feed speed: 11 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr

more

Listing

Italy

8,629 km

BRANDT KDF 680 PROFILINE AIRTEC

Call

Condition: used, Machine number: 006193, Type of edging: Thin edge, Thick edge, Solid wood S9uxckgas Gluing System: EVA Hotmelt, Hot Air Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 20 m/min Maximum panel thickness: 60 mm Operating Units: 9 nr

more

Listing

Italy

8,629 km

BRANDT KDF 430 C

Call

Condition: used, Machine number: 006181, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 11 m/min Maximum panel thickness: 60 mm D7pmobs Operating Units: 8 nr

more

Listing

Italy

8,629 km

BRANDT KDF 660

Call

Condition: used, Machine number: 005503, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 16 m/min Cbksfzkg Maximum panel thickness: 60 mm Operating Units: 8 nr

more

Listing

Italy

8,629 km

BRANDT KDN 220

Call

Condition: used, Machine number: 006116, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 10 m/min Maximum panel thickness: 50 mm Rdd0v Operating Units: 7 nr

more

Listing

Italy

8,629 km

BRANDT KDF 1220

Call

Condition: used, Machine number: 006434, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Premilling Unit: yes Bf2eydvtqlp Corner Rounding Unit: yes Max feed speed: 11 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr

more

Listing

Italy

8,629 km