Brandt kd 68 cf for sale
Identified location: Ashburn (US) (Edit)
|
10
Brandt KD79/2CF with feedback systemTop condition! New warp plates and PU-rolls in 2018.overhauled. The machine can still be viewed at the customer's until week 49.FügenSchlagschereLeimangabe QA 34Kaps2 x Fräsen EckenkopierenRadiusziehklingeFlächenziehklinge ( new model)RückführanlageMaschine is still in operation and can be viewed at any time.Preis VB
Bjzra2oqa more
|
|
6
Anleimen bis 12 mm dicke
Anleimerhöhe bis 60 mm
Werkstückbreite min. 65 mm
Vorfräsen
Kappen
Bündigsägen
Bündigfräsen
Fasefräsen
B8q0g0h9u
Radiusfräsen
Nuten
Eckenkopieren
Radiusziehklinge
Flachziehklinge
Putzen
Gewicht ca. 2700 kg
Platzbedarf 6800 x 1300 x 2100 mm
Lagerort: Nattheim more
|
|
6
edge thickness 0,4 - 12 mm
work piece thickness 10 - 55 mm
work piece length min 160 mm
work piece width min 65 mm
feed speed 13 m/ min
compressed air 7 bar
machine length 5420 mm
weight 1950 kg
glue pot with quick melt system
glue application roller wit left and right turning
edge magazine for PVC and strips
motor height adjustment for pressure beam
pneumatic pressure rollers for edge magazine
control panel, rotatable
all aggregates in-line controlled
cutting
milling combinati... more
|
|
5
BRANDT KDF 650 edge banding machine
Edge thickness: 0.4 - 12 mm
Roller separation max.: 3 x 45 mm
Resp.: 0.8 x 65 mm
Workpiece thickness: 8 - 60 mm
Variable feed: 8 - 16 m/min
When the form milling machine is selected, the automatic switchover to 11 m/min.
Electrics: 400 V - 3 Ph. - 50 Hz
Pneumatic connection min. 6 bar
Connected load approx.: 12.5 kW
Blujrw0ng
Total length: 5,860 mm
Workpiece thickness: 8 - 60 mm
Joint trimming unit: 2 x 2,2
Snipping unit: Yes
Profile trimming unit: Yes
Flat sc... more
|
|
4
Remscheid, Germany
dealership location
6411 km
ready for operation (used)
Indramat KDS 1.1-100-300-W1 Controller SN:234547768256008 , expertly completely overhauled and tested with 12 months warranty, 100 functions, scope of delivery acc. to photos
Budip0v0 more
|
|
6
Horsham, United Kingdom
dealership location
5927 km
2006
used
Single-sided edge bander for hot melt gluing with Quick change hot melt glue pot. This allows the processing of both EVA and PU adhesives, the glue roller can be selected to rotate with or against the workpiece feed direction. The temperature of glue is automatically adjusted by an electronic thermostat, lowering the temperature when the machine is not in use and activating the glue again by means of an infared heater
Automatic edge magazine for coiled material and fixed lengths,including a ro... more
|
|
6
Kaiserslautern, Germany
dealership location
6526 km
2002
ready for operation (used)
General Data
Machine weight 11400 kg
Control Unit
Brand Heidenhain
Model iTNC 426M
CNC language customizable Yes
Main Drive
Number of spindles 1
Spindle speed range 12000 rpm
Movement
X-Axis Movement 1680 mm
Y-Axis Movement 810 mm
Z-Axis Movement 810 mm
Table
Outer length 1800 mm
Outer width 780 mm
Media
Main electronic connection 3x400 V
Power consumption 35 kVA
Chip conveyor Yes
Internal cooling Yes
Additional Equipment
BLUM TC52 workpiece probe
This ZPS MCFV 1680 NT Vertical Machining... more
|
|
6
Edges up to 3 mm from coil, 6 mm strips
Workpiece width min:
When Workpiece thickness 12-22mm 70 mm*
When Workpiece thickness23-40 mm, 120 mm*
When Workpiece thicknesse 41-60mm 150 mm*
*in relation to workpiece length
Feed speed 11 m/min
Equipment:
Pre-Milling 2 X 2,2 KW
Pre-heating of panel edge
Glue aggregate A6
Gfwfxpp
Coil edge magazine
Pressure zone, central positioning
End trims, chamfer 15°/straight, 2 X 0,18 KW, 12.000 rpm, electro-pneumatic setting central control
Top & Bottom trimmng... more
|
|
13
edge banding machine - one sided
max. panel height 60 mm
max. solid strip thickness 12 mm
coil material thickness max 3 mm
max feed speed 16 m/ min, variable
electric height adjustment
infeed fence adjustable
indeed panel heating zone
glue system granulate with pre melting unit
pre- milling aggregate
trimming saw with 2 motors
flush/radius/chamfer milling units: 2
corner rounding unit: 2 motors
scraper unit: profile and flat
buffing unit
magazine for single strips
all aggregates actuated ... more
|
|
5
Barntrup, Germany
dealership location
6496 km
1999
used
Price: 12.500,00 €Price: 9.500,00 € Single sided edge banding machine Brand: Brandt Type: KD 99-CF Year: 1999 Right-hand version Inclusive return Geldmeier Technical data:Edge thickness: 0,4 - 20 mmCoil separation max.: 3 x 45 mm bzw. 0,8 x 60 mmWorkpiece thickness: 8 - 55 mmWorkpiece wide min.: 65 mmWorkpiece length min.: 160 mmFeed max.: 16 m/[...]: 400 V, 3 Ph., 50 HzPneumatic connection min.: 7 barConnected load: ca. 17 kWTotal length: 8.020 mmTotal weight: 3.500 kg Motoric adjustable top ... more
|
|
|
|
11
Field of application: Construction
Make of engine: Kubota V1505
Capacity: 3,5 m³/m
Compressor type: Screw compressors
Bgnmickhp9
Working pressure: 7 bar more
|
|
6
|
|
6
Single sided edge bander
Edges: 0,4 to 5 mm
Coil edges 0,8 to 20 mm.
Panel thickness: 8 to 55 mm, motorised setting (programmable)
Bbhloaz0re
Feed speed 16 m/min
Equipment:
Coil- and stripmagazine
Quickmelt unit
Pressure zone with 1 driven and 4 non-driven rollers
End trims, pneum. Setting straight/chamfer, 2 x 0,75 kW
Chamfer trimming, 2 x 1,5 kW , pneumatic adjustment
Radius trimming, 2 x 0,55 kW, pneumatic adjustment
Contour trimming, 2 x 0,35 kW
Profile scraping with quick exchange tools
... more
|
|
1
Edge bander
SMA-REF-6619
Type: edge banders
Manufacturer: Brandt
Npr2v
Model: OPTIMAT KD 77 C
Year: 2001
Working range:
Edge thickness: 0,4 - 12 mm
Workpiece height: 8 - 60 mm
Roll / strip magazine
Granulate
Cutting (chamfer/straight)
Milling
Profile trimming
Scraper
Buffing
Dimensions: 5.740 x 1.320 x 1.630 mm
Condition: in use
ready for your test
Location: Southern Germany
Availability: on demand more
|
|
5
Barntrup, Germany
dealership location
6496 km
1999
used
single sided egde banding machine Brand: BRANDT Type: KD 99 F Year: 1999Price: 12.500,00 € + VATSpecial price: 9.900,00 € + VAT With Ligmatech workpiece return type: ZHR 15 Technical data: Electrical interface LIGMATECH ZHR 15 V-belt top up to 1500 mm (installing) length Infeed fence adjustable Special infeed fence for the process of laminate overhangsMin. workpiece thickness: 16 mmMax. laminate overhang: 5 mm Program controlled adjustment infeed fence Program controlled adjustment pressure zon... more
|
|
6
Horsham, United Kingdom
dealership location
5927 km
2008
used
2008 Brandt Edgebander for tape and thin lippings with 2 motor corner rounding unit.
This machine is in production at a top end kitchen manufacturer in London until March 2019.
Technical Specification:
Model No KDF560 2C
Serial No 0-261-02-5265
Year of manufacture 2008
Premilling yes
Guillotine yes
Front/Rear Saw yes
Top & Bottom Trimming yes
Top & Bottom Fine Trimming
Corner Rounding 2 Motor
Bey2twcyuw
Scraping yes
Buffing yes
Glue System
M... more
|
|
6
machine edge banding machine
manufacturer Brandt
type KD 46
part Id-no. 2240128
year of construction 1998
work-piece width min. 70 mm
work-piece length min. 160 mm
height of work piece min-max 10 - 50 mm
edge thickness min. max. 0,4 - 8 mm
feed m/min. 11 m/min
stop side right
8c7z0lbn9
glue indication glue roller
gluing aggregate hot melt glue
edge magazin rol... more
|
|
6
Provisional specification
Material thickness 0.4 - 3mm
Workpiece thickness 8 - 50mm
Feed speed approx 9m/min
Equipped with
Coil / strip feed unit
Hot melt glue tank
Pressure zone
Twin motor end trimming saws x 0.18kw each x 12,000 rpm
Top and bottom tilting flush trimming x 0.27kw each x 12,000rpm
Mechanical digital readout for top pressures
Gvnkm2fd
Outrigger panel support more
|
|
6
Edges up to 3 mm from coil, 6 mm strips
Workpiece width min:
When Workpiece thickness 12-22mm 70 mm*
When Workpiece thickness23-40 mm, 120 mm*
When Workpiece thicknesse 41-60mm 150 mm*
*in relation to workpiece length
Nozpl
Feed speed 11 m/min
Equipment:
Pre-Milling 2 X 2,2 KW
Pre-heating of panel edge
Glue aggregate A6
Coil edge magazine
Pressure zone, central positioning
End trims, chamfer 15°/straight, 2 X 0,18 KW, 12.000 rpm, electro-pneumatic setting central control
Top & Bottom trimmng, ... more
|
|
15
Subfamília: Edge banding machine Single sided Tipo de rebordo aplicado: thin edge thick edge solid wood veneer Sistema de colagem: PUR Espessura mín. do rebordo: 0.4 mm Velocidade máx. de avanço: 14 m/min Pressão superior: yes Pressão com: Loswalzen Grupos operadores na parte a esquadriar: 1 1 Aggregate: Corrections Lâmpadas para aquecer o rebordo: yes Sistema de colagem: yes pré-fusor para cola poliuretânica: yes pré-fusor para cola poliuretânica: With Nozzle Applicator Grupos operadores na par... more
|
|
6
- komplette Bearbeitung 50 mm
- Fügen bis 50 mm
-Schutzsprüheinrichtung für Kante nachgerüstet
-Kappen
-bündig- radius-Kombifräser 1 / 2 mm
Sthpag
-Radiusziehklinge 1 mm
-Wechselaggregat Radiusziehklinge 2 mm
-Flächenziehklinge
-Schwabbelaggregat
-Wechselleimbecken
-Wechsel- Diafräsersatz 50 mm.
Lagerort: Lieferant more
|
|
11
Pre-milling
Plate heating
Glue tank
Guillotine
Cutting 2 x balls straight or phase
Edge milling
Milling of corners
Radial scraper
Flat cyclin
polisher
Thickness of the rim 0.4 - 6 mm
Npztz
Element thickness 8 - 50 mm more
|
|
6
machine edge banding machine
manufacturer Brandt
type KDF 660
part Id-no. 2240577
year of construction 2003
height of work piece min-max 8-55 mm
edge thickness min. max. 0,4-8 mm
feed m/min. 14 m/min
stop side right
jointing-/profile-trimming 1 per site
glue indication glue roller
gluing aggregate hot melt glue
edge magazin roller 3 mm
edge magazin strips ... more
|
|
6
Bad Honnef, Germany
dealership location
6442 km
used
PC control with screen, swivelling control panel, program memory, manual, self-clamping pressure bridge adjustment, feed by means of transport chain, workpiece support extendable, diamond jointing cutter in synchronous and counter-rotating mode, bottom gluing basin, cross-cut saw with 2 HF motors, Cross-cut saw swiveling, flush / radius milling unit, milling tools with carbide exchange plates, corner copying unit with diamond-coated milling cutter, radius scraper, flat scraper, blow nozzle on fl... more
|
|
12
Saerbeck, Germany
6394 km
2005
good condition (used)
Edge banding machineManufacturer: BrandtTyp: Optimat KDF 350 CBaujahr: 2005Operating hours: 592 h-Fügefräsagat-Kppen-Bündig-Bräsen-Eckenkopieren-Radienziehkling e-FlächenziehklingeWerkstückwicke: 8 - 50 mm,Unten liegendes LeimbeckerLeimgauftrag Gleichlauf-GegenlaufKantenstärke Rollenware: 0,4 - 3 mmmax. Kantenstärke Eckenkopieren: 3 mmWerkstückficke Eckenkopieren: 8-40 mmmin. 8-40 mmmin. Workpiece length: 180 mm,Feed speed: 9 m/minHeight adjustment manualDimensions (LxWxH): 3,900 x 1,140 x 1,500... more
|
|
9
Subfamília: Edge banding machine One-sided Tipo de rebordo aplicado: thin edge thick edge solid wood veneer Sistema de colagem: EVA Comprimento mín. do painel: 160 mm Largura mín. do painel: 65 mm Espessura mín. do rebordo: 0.4 mm Velocidade máx. de avanço: 14 m/min Pressão superior: yes Pressão com: Loswalzen Grupos operadores na parte a esquadriar: 1 1 Aggregate: Corrections Depósito para bobina: yes n.º posições: 1 Sistema de colagem: yes recipiente para cola fundida a quente: yes pré-fusor p... more
|
|
2
Field of application: Construction
Beoyknc0d7
Make of engine: Kubota V1505
Capacity: 3,5 m³/m
EPA marked
Compressor type: Screw compressors
Working pressure: 7 bar more
|
|
6
Single sided edge bander with hot melt, fixed side at the right, pre-milling unit
Edge thickness: 0,4 to 8 mm
Workpiece thickness: 8 - 60 mm
Feedspeed 8-14 m/min (limited to 11 m/min using the contour trimming)
Workpiece transport by chain, top pressures with rubber rollers
Sound enclosure over all trimming motors
Equipment:
Adjustable fence, motorised
Sprayers release agent
Pre-milling with 2 shapers, each 2,2 kW
Coil and strip magazine, guillotine for 3 x 45 mm edges, 800 mm coils
automatic ed... more
|
|
machine edge banding machine
manufacturer Brandt
type KDF 660
part Id-no. 2244866
year of construction 2007
height of work piece min-max 8-60 mm
edge thickness min. max. 0,4-12 mm
feed m/min. 8-16 m/min
feed speed infinitely variable yes
stop side right
jointing-/profile-trimming 1 per site
glue indication glue roller
gluing aggregate hot melt glue
edge magazin ro... more
|
|
6
Bad Honnef, Germany
dealership location
6442 km
used
-Used PC control with screen, touch screen, swivelling control panel, program memory, automatic pressure bridge adjustment, feed by means of transport chain, workpiece support can be pulled out, diamond jointing cutter in synchronous and counter-rotating operation, strip magazine, bottom glue tank, changing device for glue tank, stand-by function, printing unit with driven roller, cross-cut saw with 2 HF motors, cross-cut saw can be swiveled pneumatically, flush / radius milling unit, pneumatic ... more
|
|
10
Augsburg, Germany
6785 km
1998
excellent (used)
Edge thickness 0.4-12 mmGlueing unit: glue roll / granulateKAPPAGGREGATFräsaggregat scraper buffingmachine length 4500 mmFurther technical data on requestAll data taken from brochure, therefore without guarantee
Bfvhxk70l0 more
|
|
13
Subfamília: Edge banding machine Single sided Sistema de colagem: EVA Altura mín. do painel: 8 mm Altura máx. do painel: 50 mm Espessura mín. do rebordo: 0.4 mm Velocidade máx. de avanço: 9 m/min Pressão superior: yes Pressão com: Loswalzen Guias de apoio do painel: yes Depósito para bobina: yes n.º posições: 1 Sistema de colagem: yes recipiente para cola fundida a quente: yes Grupo transportador de rolos de pressão do rebordo: yes n.º rolos de pressão: 2 Grupos operadores na parte a rebordar: 3... more
|
|
11
ZPS MCFV 1680 NT
TRAVEL XYZ:1650 X 850 X 850 MM
YEAR: 1999
SPINDLE:6.000 RPM ISO50
Bfsng2kdqd
MAGAZIN: 16 TOOLS
CONTROL: HEIDENHAIN 426
WEIGHT: 11.4 TON more
|
|
5
Bretzfeld, Germany
dealership location
6647 km
1996
used
:0,4-12 mm
Workingpiece thickness from to:10-55 mm
Total length:5500 mm
Feed speed:13 m/min.
total power requirement:ca. 9 kw
Weight:1950 kg
:12 mm
:rechts nach links -
:65 mm
Ihi3rxl
:ja -
:ja -
:ja -
:ja -
:ja -
:ja - more
|
|
6
machine edge banding machine
manufacturer Brandt
type KDF 670 PROFILINE
part Id-no. 2245010
year of construction 2005
height of work piece min-max 8 - 60 mm
edge thickness min. max. 0,4-12 mm
feed m/min. 16 m/min
stop side right
jointing-/profile-trimming 1 per site
glue indication glue roller
gluing aggregate hot melt glue
edge magazin roller 3 mm
edge magazi... more
|
|
4
Edgeband thickness max 8 mm
Edgeband height max 55 mm
Thickness of coiled edgeband 3 mm
Feed max 11 m/min
Height adjustment
Bf7z32erpz
Glue system granulate: glue pot bottom
Flush / radius / chamfer milling stations: 2
Corner rounding unit 1 motor
Scraper: Profile and flat more
|
|
3
OPTIMAT KDF 650 C 2006
One-sided edge banding machine for processing straight edges of elements as well as for edge banding and finishing with various edges in longitudinal and transverse passage.
Equipment:
Manual introductory ruler
2x2.2 KW 200 Hz pre-milling aggregate
2x50.35 sq
Milling aggregate 2 X 0.55 kw counter-rotating BF 6240
Milling finishing unit (for corners) 2x0.35 KW FF6220
Profile scraper with quick-change heads ZK 6510
Brush aggregate
QUICKMELT - 2-stage glue aggregate
PNEUMA... more
|
|
14
Subfamília: Edge banding machine Single sided Tipo de rebordo aplicado: thin edge thick edge Sistema de colagem: EVA Altura mín. do painel: 8 mm Altura máx. do painel: 50 mm Espessura mín. do rebordo: 0.4 mm Velocidade máx. de avanço: 10 m/min Pressão superior: yes Pressão com: Guias de apoio do painel: yes Depósito para bobina: yes n.º posições: 1 Sistema de colagem: yes recipiente para cola fundida a quente: yes Grupo transportador de rolos de pressão do rebordo: yes n.º rolos de pressão: 3 Gr... more
|
|
8
Fehring, Austria
7198 km
1998
refurbished (used)
Edge banding machine Brandt KD 8086-FTechnical data : Processing and application unit consisting of..: Rolls and Fixed Length MagazineRoll Separation Device, Glue Application, Infrared - Glue Activation, Pressure Zone, End Trimming Unit, - Pre-gluing Glue, Straight Caps, Jointing Trimming Unit, 15 degrees oblique trimming, Radius Trimming, Bevel Trimming - Shape Saw UnitRadius Drawing Blade - Scraper Blade Unit Edge Grinding - Belt Grinding UnitBuffing UnitMachine is in very good condition, serv... more
|
|
6
machine edge banding machine
manufacturer Brandt
type KDF 660 C
part Id-no. 2245076
year of construction 2005
height of work piece min-max 8 - 60 mm
edge thickness min. max. 0,4-12 mm
feed m/min. 14 m/min
feed speed infinitely variable yes
stop side right
jointing-/profile-trimming 1 per site
glue indication glue roller
gluing aggregate hot melt glue
edge magazin ... more
|
|
8
Type: Single side edgebander
Year: 2006
Control: POWER CONTROL
Panel height (mm): 50
PVC/ABS Thikness: 3
Infeed speed mt/min: 11
Band coil support: Yes
Bfspomejxt
End cutting unit: YES
Fine trimming unit: Tilting
Corner rounding unit: 1 motor
Edge scraper unit: YES
Buffing unit: YES more
|
|
8
Edge bander Brandt
type: Optimat KD 53
year of manufacture: 2002
glue basin for granulate glue
table for roll material and magazin for veneer strips
clipping knife
clipping saws front and back
Beivsczgs
router top and bottom
workpiece thickness 8 – 40 mm
height of edge banding material max. 45 mm
edge bander thickness 0,4 – 3 mm
infeed speed 9 m/min.
input power 3,7 kW
machine length 3050 mm
weight: 720 kg more
|
|
15
Subfamília: Edge banding machine Single sided Sistema de colagem: EVA Altura mín. do painel: 8 mm Altura máx. do painel: 60 mm Espessura mín. do rebordo: 0.4 mm Velocidade máx. de avanço: 16 m/min Pressão superior: ja Pressão com: Loswalzen Guias de apoio do painel: yes com posicionamento de CN: yes Grupos operadores na parte a esquadriar: 1 1 Aggregat: Corrections automatic intervention after time: yes Engine power: 2.2 KW No. Rpm: 11800 RPM Lâmpadas para aquecer o rebordo: yes Depósito para bo... more
|
|
6
Miastko, Poland
6866 km
2008
excellent (used)
- Edge thickness 0.4 - 3 mm- Workpiece thickness max. 40 mm- Workpiece length min. 250 mm- Roll separation 0.4 - 3 mm- Right execution- Feed rate 10 m/min- Adjustable infeed ruler- Trimming unit 2 x 2.2 KW, 200 HZ- For roll material- Pre-cutting shears for roll material up to 3 mm- Pressure zone , Number of rolls 1 2 pcs. Front and rear cross-cut 0 - 15 degrees - Combined trimming unit, flush/radius - corner trimming or shaping unit - profile scraper R 2 mm - flat scraper control type EC 10 - ch... more
|
|
5
- milling unit
- sanding unit
Bcmrjht
- pneumatic pad
- up/down milling unit
- brusher
- variable regulated feeder
Ligmatech ZHR05 not included in this price more
|
|
6
machine edge banding machine
manufacturer Brandt
Mueyvs
type KDF 770 C
part Id-no. 2246505
year of construction 2006
height of work piece min-max 8 - 60 mm
edge thickness min. max. 0,4 - 12 mm
feed m/min. 10-20 m/min
feed speed infinitely variable yes
stop side right
jointing-/profile-trimming 1 per site
glue indication glue roller
gluing aggregate hot melt glue
ed... more
|
|
8
BRANDT KDF 550 C edgebanding, Power control PC 20 + controlling, Year: 2007.
Speed: 8-14 m/min., thickness of edging: 0,4 - 8 mm, thickness of panel: 8-50-60 mm.
LIGMATECH ZHR 05/R/065 Return panel conveyor. Year: 2008.
Speed controllable, This machine is suitable for bigger or newer machine.
Few hours of operation.
Bfqtuywnk8
FOR SALE SEPARATELY!! A tell you more information English or German language for asking. more
|
|
7
Celje, Slovenia
7188 km
2004
excellent (used)
Very good condition, wery little in use, test is possible.
Jvdm0y more
|
|
|
