Used Brandt Kdn 210 for sale (90)

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, workpiece height (max.): 50 mm, edge thickness (max.): 3 mm, rotational speed (max.): 10,960 rpm, Equipment: CE marking, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum panel thickness: 50 mm Minimum panel height: 8 mm Maximum panel height: 50 mm Minimum edge thickness: 0.4 mm Maximum edge thickness: 3 mm Number of positions: 1 Unit 1 Unit: End trimming Number of motors: 2 Automatic engagement by time: yes Motor power: 0.18 kW Speed: 10,800 rpm Unit 2 Unit: Edge milling Number of motors: 2 Automatic engagement by time: yes Motor power: 0.27 kW Speed: 10,960 rpm Unit 3 Unit: Edge scraper Control system: BFS MACHINE DETAILS Installed total power: 4 kW EQUIPMENT Upper pressure Pressure by spring-loaded rollers Panel support guide Magazine for the coil EVA glue system Hot-melt glue pot Bcedpfxsxw Tuge Aglsu Edge pressure roller track Number of pressure rollers: 3 CE marking

Condition: used, machine/vehicle number: 008371, Type of edging: Thin edge, Thick edge, Solid wood Bedpfxsx Swfbs Aglscu Gluing System: EVA Hotmelt Corner Rounding Unit: yes Max feed speed: 16 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: used, Year of construction: 2004, Used machine Year of manufacture: 2004 with gluing unit for hot-melt adhesive granules Glue reservoir located below the glue roller Glue application to the workpiece via glue roller in both co-rotating and counter-rotating modes automatic edge magazine for coil material and fixed lengths Pressure zone with pneumatically-driven main pressure roller and special post-pressure rollers to compact the upper and lower glue joint Centrally adjustable upper pressure Central manual chain conveyor lubrication Control panel at machine infeed End trimming unit (saw aggregates) for front and rear edge overhang with high-precision linear guides 2 motors, each 0.18 kW Swivel range for straight and bevel cutting 0–15 degrees Bodpfx Ajxya Rtoglscu Flush-milling unit, top and bottom, with vertical and horizontal tracing Swivel range 0–15 degrees with 2 milling motors, each with replaceable insert cutter combinations (straight/radius) Digital counters enable rapid and precise, i.e., repeatable, settings Two-point pneumatic adjustment for upper and lower milling motors Scraper unit for finishing processing with horizontal/vertical tracing Support table extendable up to 350 mm Integrated section control for contactless operation of processing functions. Settings via keyboard and LED display Workpiece thickness: 8–50 mm Edge thickness: 0.4–3 mm Feed speed: approx. 9 m/min Connected load: 4.1 kW Compressed air connection: 6 bar Weight: approx. 750 kg Machine length: 3,150 mm Availability: short term Location: Flörsheim

Condition: used, Year of construction: 2006, Used machine Year of manufacture: 2006 Equipment and technical specifications: - With glue application unit for hot melt adhesive granulate - Suitable for processing PU adhesive granulate in compliance with adhesive processing regulations - Glue reservoir located beneath the glue roller - Glue application to the workpiece via glue roller in both co- and counter-rotation Bcjdpfx Agewkbd Ejlsu - With contact heating shoe for preheating the workpiece - Automatic edge magazine for rolls and fixed lengths - Pressure zone with pneumatically driven main pressure roller and special follow-up pressure rollers to compact the top and bottom glue joints - Centrally adjustable top pressure - Central manual chain lubrication - Control panel at machine infeed - End trimming aggregate: - For trimming front and rear edge overhang; high-precision linear guide - 2 motors, each 0.18 kW - Tilt range for straight and angled cuts: 0–15 degrees - Flush milling aggregate: - Top and bottom with vertical and horizontal sensing - Swivel range 0–15 degrees with 2 milling motors using interchangeable straight/radius cutter combinations - Digital counters enable fast and defined, i.e. repeatable, adjustments - Two-point pneumatic adjustment of top and bottom milling motors - Scraper unit for finishing, with horizontal/vertical sensing - Extendable workpiece support up to 350 mm - Integrated section control for contactless operation of processing functions. Adjustable via keypad and LED display - Workpiece thickness: 8–50 mm - Edge thickness: 0.4–3 mm - Feed speed: approx. 9 m/min - Connected load: 4.1 kW - Compressed air connection: 6 bar Machine length: 3,150 mm Weight: approx. 750 kg Availability: short-term Location: Röllbach

Condition: like new (used), Year of construction: 2010, machine/vehicle number: 0-261-20-4583, Edge banding machine BRANDT , Type O KDN 200 Ambition 1200, used, Year of manufacture 2010 Bedjh Ak D Uopfx Aglocu Air pressure 6 bar The power supply voltage 400V – 3 ph - 50 Hz Total power 4 kW Work piece thickness from 0, 3, 4 to -8,50 mm Extraction diameter 3 x 60 working height 950 mm Feed speed/ Sealing side speed: 10m/min Coil cut off max: 0,4 mm -3,0x45 mm noise emission db(A) 84 to 87 Transport/overall dimensions L3.450xW1300xH2180mm Net weight 1200 kg Gluing, End cutting, Top & Bottom trimming, Scraping Price Euro 4900 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Pre-milling aggregate Glue station for granulate Pneumatic pre-cut guillotine Trimming unit with two saw blades Profiling milling unit with profile cutters Profile scraper Polishing units Year of manufacture: 2009 Bjdpex I A Duofx Agljcu Machine length: 3.7 m

Condition: good (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 0 - 251 - 20 - 4507, Due to a switch to solid wood processing, this machine has been used very little and is in good condition. Available for viewing in the workshop. Bjdpfx Aoxzp Uwogljcu

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 0-261-04-5659, feed rate X-axis: 14 m/min, workpiece height (max.): 60 mm, controller model: Power Control Check 20+, grinding spindle motor power: 2,200 W, TECHNICAL DETAILS Panel height: 8 - 60 mm PVC/ABS thickness: 3 mm Pre-scoring depth for wood: up to 8 mm Feed speed: 8 - 14 m/min MACHINE DETAILS Control unit: Power Control Check 20+ Output per sanding motor: 2.2 kW Supply voltage: 400Y/230 V Phases: 3 Frequency: 50 Hz Full load operating current: max. 23 A Largest motor: 4.5 A Largest heating circuit: 3.1 A EQUIPMENT Electrically adjustable working length via CNC Lateral roller conveyor with idler rollers for panel support Coil holder plate Gluing unit for EVA adhesive with pre-filler and glue tank Edge pressure unit for straight profiles, with CNC-adjustable pressure rollers Indexing group with automatic tilt adjustment Overlapping milling unit with 2 motors Bjdpsydim Tofx Aglscu Rounding unit with 2 multifunction motors (chamfering + rounding) with CNC automatic adjustment Edge scraper unit Glue scraper unit Brush unit

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 0-261-20-5976, feed rate X-axis: 20 m/min, workpiece height (max.): 60 mm, controller model: POWER CONTROL PC 20+, TECHNICAL DETAILS Panel height: 60 mm PVC-ABS edge thickness: 3 mm Solid wood edge thickness: 12 mm Feed speed: 20 m/min MACHINE DETAILS Control system: POWER CONTROL PC 20+ Operating current at full load: max. 33 A Largest motor: 9.7 A Largest heating circuit: 2.7 A Fuse: 35 A Frequency: 50 Hz Bedpfx Aoydihdsglocu EQUIPMENT Upper motorized rubberized belt Manual infeed guide Anti-adhesive unit Jointing unit Gluing with EVA adhesive Edge support plate End trimming unit with automatic tilt adjustment Offset trimming and corner rounding unit with two motors Linear corner rounding unit with 2 motors Edge scraper unit Glue scraper unit Brushing unit

Condition: used, machine/vehicle number: 006710, Type of edging: Thin edge, Thick edge, Solid wood, Veneer Gluing System: EVA Hotmelt, Hot Air Bcsdpeqy Em Tsfx Agleu Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 11 m/min

Condition: used, machine/vehicle number: 006719, Type of edging: Thin edge, Thick edge, Veneer Gluing System: EVA Hotmelt Bsdpjq Awlisfx Aglscu Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 11 m/min

Condition: good (used), Year of construction: 2005, functionality: fully functional, Single-sided edge banding machine with jointing cutters and coping unit, designed for processing EVA hot-melt adhesives Technical data: Edge thickness: 0.4 - 12 mm Workpiece thickness: 8 - 60 mm Coil separation: 3 x 45 mm or 0.8 x 65 mm Machine length: approx. 6,860 mm Top pressure manually height-adjustable Equipment: Manually adjustable infeed fence Jointing unit with 2 motors, 2.2 kW (each) both motors pneumatically controlled Hot-melt adhesive application Pressure zone with 1 primary pressure roller and 3 subsequent pressure rollers End trimming unit with 2 motors, each 0.35 kW automatically adjustable via program from chamfered to straight trim cuts Edge trimming unit with 2 motors, each 0.55 kW, for flush trimming, chamfer trimming, or radius trimming with 4-position fixed-point adjustment for side tracing Grooving unit with horizontal shaft, e.g., for back panel grooves Copy milling unit with 2 motors, each 0.35 kW Pneumatic infeed and outfeed control Profile scraping unit with pneumatic infeed/outfeed control Flat scraper unit Buffing unit Additional equipment: * Release agent application at infeed Control system PC 16 with color graphic user interface Bedpfxeygg Nke Aglecu Attached return system LIGMATECH BOOMERANG ZHR 11 Return system currently not operational, in need of repair

Condition: used, Year of construction: 2002, functionality: fully functional, Finish sanders Pre-melter End trimming units Edge trimmers Corner rounding units Edge scrapers Bedpfx Agoyf D Uhslscu Glue scrapers

Condition: used, Year of construction: 1996, Edge thickness: 0.4 - 12 mm Roll edge: 3 x 45 mm or 0.8 - 60 mm Minimum workpiece width: 65 mm Minimum workpiece length: 160 mm Workpiece thickness: 10 - 55 mm Feed rate: 13 m/min Pre-milling (joining) Glue pot Quickmelt Gluing unit Trimming Flush trimming Chamfering Radius trimming Corner rounding Flat scraper Buffing unit Machine dimensions: 7450 x 1220 x 2400 mm Weight: 3000 kg Bcodpfovvkd Tjx Aglju Storage location: Nattheim

Condition: used, Year of construction: 2002, Machine length: 6240 mm Weight: 2400 kg Power consumption: 14 kW Extraction diameter: 120 / 140 mm Storage location: Nattheim Bodpfx Aovvkfwoglscu

Condition: ready for operation (used), Year of construction: 2001, Edgebander BRANDT OPTIMAT KD 68 CF - year of production 2001 - DTR TECHNICAL SPECIFICATIONS: machine tool adapted to the processing of PVC / ABS edges veneer up to 3 mm thick and wooden sticks up to 9 mm thick pre-cutter - plate milling tape pressure glue tank, hot melt glue granules, additional glue application roller heated strip of tape guillotine - pre-cutting of the veneer 3 pressure rollers 2 ready-to-cut ball crushing units 2 milling aggregates for edge shaping (radial milling cutters) an aggregate for making corners (milling) sanding units - for removing excess glue polishing aggregates max. workpiece thickness 50 mm min. workpiece width 60 mm min. element length 160 mm Bsdpfx Ashcitrsglscu feed speed 96 m / min total power 10.8 kW diameter of the extraction port 120 mm dimensions (length / width / height) 5700/1200/2100 mm weight 2000 kg

Condition: used, Used machine Bcodjwwxykspfx Aglju

Condition: used, machine/vehicle number: 008161, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt, PUR Premilling Unit: yes Corner Rounding Unit: yes Bsdpfx Agsx A Tlcolscu Max feed speed: 20 m/min Maximum panel thickness: 60 mm Operating Units: 6 nr

Condition: used, machine/vehicle number: 008160, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Bcsdpfxexqm Iyo Aglsu Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 14 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: good (used), Gluing unit, gluing section, gluing head, heating basin for edgebanders, edgebanding machine -Manufacturer: Brandt, components from the BRANDT KM 36 edgebanding machine -Individual components: see photos -Price/Sale: complete Bcedpsgylrdefx Agleu -Overall dimensions: 1200/800/H530 mm -Total weight: 122 kg

Condition: good (used), Modular aggregate unit, format processing unit, machining unit, milling unit, form milling unit, jointing milling unit, end-cutting unit, double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -Manufacturer: Homag, cutting units from edgebanding machine BRANDT KM 36 -Engines: Homag type LF-40-L / Perske KNS 22.08-2 Bodpjgy Da Ssfx Agljcu -Power: 0.27 kW / 12000 rpm / 10800 rpm -Voltage: 220 V / 200 Hz -Pneumatic components: Bosch -Individual components: see photos -Price/Sale: complete -Overall dimensions: 500/560/H670 mm -Weight: 51 kg

Condition: good (used), Finishing unit, buffing unit, modular unit, format processing unit, double-end tenoner, edge processing machine, after the scraper for edge processing machine -Finish unit: from BRANDT KM 35 edgebanding machine -Motor: ATB 0.25 kW -Speed: 2820 rpm - laterally adjustable -Height: adjustable -Dimensions: 480/250/H490 mm Bodegy T I Espfx Aglscu -Weight: 29 kg

Condition: used, Edge banding machine, edge banding machine, edge banding machine, finishing unit, buffing unit, modular assembly kit, format processing unit, double-end profiler, edge processing machine, sanding unit, edge banding unit -Unit: from edge banding machine BRANDT KM 35 Bcodpfxogy T Nxo Aglsu -Motor: Groschopp type PM1 72-35 - Mot 180 V / 54 W. -Individual components: see photos -Dimensions: 425/270 / H260 mm -Weight: 24 kg

Condition: good (used), Gear, angular gear, Stinrad gear, transmission gear, worm gear, angular gear for edge banding -Manufacturer: ZAE, angular gear with cardan joint from the BRANDT KS 25 edge banding machine Bcjdpfegylraox Aglsu -Type: W 88 -Translation: i = 2: 1 -Dimensions: 260/100 / H210 mm -Weight: 7.2 kg

Condition: used, Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -Manufacturer: Homag, milling unit from edge banding machine BRANDT KM 36 / KM 35 -Motor: 2x Homag type LF-55L 0.55 kW / 12000 rpm -Voltage: 220V / 200 Hz -Number: 2x milling unit available -Price per piece -Dimensions: 500/350 / H570 mm -Weight: 55 kg Bcsdogy Dbhepfx Aglju