Used Brandt Kdn 340 for sale (94)

Condition: used, machine/vehicle number: 008371, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Corner Rounding Unit: yes Max feed speed: 16 m/min Maximum panel thickness: 60 mm Iodjx Swfbepfx Ahyjal Operating Units: 7 nr

Condition: used, Year of construction: 2004, Used machine Year of manufacture: 2004 with gluing unit for hot-melt adhesive granules Glue reservoir located below the glue roller Glue application to the workpiece via glue roller in both co-rotating and counter-rotating modes automatic edge magazine for coil material and fixed lengths Pressure zone with pneumatically-driven main pressure roller and special post-pressure rollers to compact the upper and lower glue joint Centrally adjustable upper pressure Central manual chain conveyor lubrication Control panel at machine infeed End trimming unit (saw aggregates) for front and rear edge overhang with high-precision linear guides 2 motors, each 0.18 kW Swivel range for straight and bevel cutting 0–15 degrees Flush-milling unit, top and bottom, with vertical and horizontal tracing Swivel range 0–15 degrees with 2 milling motors, each with replaceable insert cutter combinations (straight/radius) Digital counters enable rapid and precise, i.e., repeatable, settings Two-point pneumatic adjustment for upper and lower milling motors Scraper unit for finishing processing with horizontal/vertical tracing Iaodpfx Ahoxya Rtsyel Support table extendable up to 350 mm Integrated section control for contactless operation of processing functions. Settings via keyboard and LED display Workpiece thickness: 8–50 mm Edge thickness: 0.4–3 mm Feed speed: approx. 9 m/min Connected load: 4.1 kW Compressed air connection: 6 bar Weight: approx. 750 kg Machine length: 3,150 mm Availability: short term Location: Flörsheim

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: C-261-04-2523, feed rate X-axis: 9,000 m/min, saw blade diameter: 100 mm, rotational speed (max.): 12,000 rpm, Submitting a bid obliges you to collect the item by the deadline of 14.10.2025! TECHNICAL DETAILS Edge Processing Edge type: Straight edges Edge material: Cut-to-size strips, lip cuts, coil material Feed speed: 9 m/min Edge material thickness: 0.4–3.0 mm Lip thickness: 0.4–3.0 mm Edge material height: 55 mm Coil diameter: 800 mm Rotation speed: 12,000 rpm Max. tool dimensions: 100 × 62 × 30 mm Extraction port Ø: 120 mm Workpiece Data Workpiece thickness: 8–50 mm Positioning accuracy: 0.1 mm Edge Banding Edge type: Straight edges Edge material: Coil material Max. tape cut: 3 × 30 mm or 0.8 × 45 mm Operating pressure: 6 bar Edge Glue Applicator Rotation speed: up to 1,800 rpm End Trimming Unit Motor speed: 12,000 rpm Saw blade diameter: 100 mm Cutting width: 2.6 mm Bore diameter: 32 mm Workpiece thickness: 45 mm Max. edge material height: 3 mm Edge material angle: 0–15° Edge material cross-section: 135 mm² Flush Trim Unit Rotation speed: 12,000 rpm Max. workpiece thickness: 8–50 mm Max. edge thickness: 3 mm Straight tools: 2 × WPL milling cutter Ø 50 × 12 × 16 mm, z = 4 Combination tools r = 3 mm: 2 × Trimmer Ø 56 × 50 × 12 × 16 mm, z = 4 MACHINE DETAILS Electrical Data Voltage: 400 V Frequency: 50 Hz Fuse protection: 16 A Iasdpexhgk Ajfx Ahysl Control voltage: 24 V

Condition: like new (used), Year of construction: 2010, machine/vehicle number: 0-261-20-4583, Edge banding machine BRANDT , Type O KDN 200 Ambition 1200, used, Year of manufacture 2010 Iajdpfx Ahoh Ak D Uoyjl Air pressure 6 bar The power supply voltage 400V – 3 ph - 50 Hz Total power 4 kW Work piece thickness from 0, 3, 4 to -8,50 mm Extraction diameter 3 x 60 working height 950 mm Feed speed/ Sealing side speed: 10m/min Coil cut off max: 0,4 mm -3,0x45 mm noise emission db(A) 84 to 87 Transport/overall dimensions L3.450xW1300xH2180mm Net weight 1200 kg Gluing, End cutting, Top & Bottom trimming, Scraping Price Euro 4900 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, workpiece height (max.): 50 mm, edge thickness (max.): 3 mm, rotational speed (max.): 10,960 rpm, Equipment: CE marking, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum panel thickness: 50 mm Minimum panel height: 8 mm Maximum panel height: 50 mm Minimum edge thickness: 0.4 mm Maximum edge thickness: 3 mm Number of positions: 1 Isdexw Tugepfx Ahyeal Unit 1 Unit: End trimming Number of motors: 2 Automatic engagement by time: yes Motor power: 0.18 kW Speed: 10,800 rpm Unit 2 Unit: Edge milling Number of motors: 2 Automatic engagement by time: yes Motor power: 0.27 kW Speed: 10,960 rpm Unit 3 Unit: Edge scraper Control system: BFS MACHINE DETAILS Installed total power: 4 kW EQUIPMENT Upper pressure Pressure by spring-loaded rollers Panel support guide Magazine for the coil EVA glue system Hot-melt glue pot Edge pressure roller track Number of pressure rollers: 3 CE marking

Condition: used, Year of construction: 2006, Used machine Year of manufacture: 2006 Equipment and technical specifications: - With glue application unit for hot melt adhesive granulate Isdpfx Aewkbd Eehyjal - Suitable for processing PU adhesive granulate in compliance with adhesive processing regulations - Glue reservoir located beneath the glue roller - Glue application to the workpiece via glue roller in both co- and counter-rotation - With contact heating shoe for preheating the workpiece - Automatic edge magazine for rolls and fixed lengths - Pressure zone with pneumatically driven main pressure roller and special follow-up pressure rollers to compact the top and bottom glue joints - Centrally adjustable top pressure - Central manual chain lubrication - Control panel at machine infeed - End trimming aggregate: - For trimming front and rear edge overhang; high-precision linear guide - 2 motors, each 0.18 kW - Tilt range for straight and angled cuts: 0–15 degrees - Flush milling aggregate: - Top and bottom with vertical and horizontal sensing - Swivel range 0–15 degrees with 2 milling motors using interchangeable straight/radius cutter combinations - Digital counters enable fast and defined, i.e. repeatable, adjustments - Two-point pneumatic adjustment of top and bottom milling motors - Scraper unit for finishing, with horizontal/vertical sensing - Extendable workpiece support up to 350 mm - Integrated section control for contactless operation of processing functions. Adjustable via keypad and LED display - Workpiece thickness: 8–50 mm - Edge thickness: 0.4–3 mm - Feed speed: approx. 9 m/min - Connected load: 4.1 kW - Compressed air connection: 6 bar Machine length: 3,150 mm Weight: approx. 750 kg Availability: short-term Location: Röllbach

Condition: used, machine/vehicle number: 006710, Type of edging: Thin edge, Thick edge, Solid wood, Veneer Gluing System: EVA Hotmelt, Hot Air Premilling Unit: yes Ijdpsqy Em Tjfx Ahyjal Corner Rounding Unit: yes Max feed speed: 11 m/min

Condition: good (used), Gluing unit, gluing section, gluing head, heating basin for edgebanders, edgebanding machine -Manufacturer: Brandt, components from the BRANDT KM 36 edgebanding machine -Individual components: see photos -Price/Sale: complete -Overall dimensions: 1200/800/H530 mm Iaodpfsgylrdsx Ahysl -Total weight: 122 kg

Condition: used, Year of construction: 2016, operating hours: 2,500 h, Single-sided edge banding machine for processing straight workpiece edges and for applying and further processing various edge materials in longitudinal and cross feed. OVERVIEW OF THE AGGREGATE CONFIGURATION: - Infeed fence extension by 300 mm with additional unit for laminate overhang - JOINTER UNIT 2 x 2.2 kW 200 Hz - GLUING UNIT A12 with automatic edge feed – APPLICATION UNIT QA 65 N EVA - TRIMMING UNIT BEVEL/STRAIGHT 2 x 0.35 kW - PNEUMATIC ADJUSTMENT TRIMMING BEVEL/STRAIGHT - PNEUMATIC 2-POINT ADJUSTMENT TRIMMING - Multi-stage milling unit MS40 2 x 0.55 kW with opposed rotation and axis adjustment – with PNEUMATIC 2-POINT ADJUSTMENT of tracing rollers (flush and radius/bevel milling) Iedpfsx S Nc Esx Ahysal - MULTIFUNCTION FORM MILLING UNIT 2 x 0.4 kW - MULTISTAGE SCRAPING UNIT MZ 40 - PNEUMATIC SCRAPER ADJUSTMENT - GLUE JOINT SCRAPER - BUFFING UNIT - SEPARATING AGENT SPRAY UNIT WORKPIECE - Glide agent spray unit - CLEANING AGENT SPRAY UNIT WORKPIECE - POWERTOUCH control system

Condition: excellent (used), Year of construction: 1998, Available immediately… Further information will follow shortly, otherwise feel free to call. Isdpfsx U Eyrsx Ahyeal

Condition: excellent (used), Year of construction: 2005, Brandt KDF 530 C Edgebanding Machine with Jointing, Corner Copying, Two Scrapers, and Riepe Spray Units. A video of the machine in operation can be provided upon request. The machine is highly automated. Edge thickness: approx. 0.4 – 8 mm Workpiece height: approx. 10 – 50 mm Feed speed: approx. 11 m/min Soundproof enclosure Extendable workpiece support Extraction connections: 1x200 mm, 1x100 mm, including the ducting shown PC16 control system with color display for easy machine operation Units: - Pressure beam manual adjustment with SIKO counter - Infeed fence manual adjustment with SIKO counter - Riepe release agent spray system - Jointing milling with Leitz WhisperCut carbide-tipped jointing cutters, resharpened - Gluing station switchable between clockwise and counterclockwise operation - Pressure zone with 3 rollers - Cross-cut saw with 2 motors, for straight or beveled cuts (program adjustment) - Combination milling unit with motorized side adjustment - Radius scraper R2, pneumatic adjustment - Corner rounding unit R2 with 1 motorized diamond cutter, pneumatically adjustable between thin and thick edges - Glue joint scraper, pneumatically retractable with large roller - Riepe cleaning agent spray system - Buffing unit Hood lock CE marking Operating manual as binder and CD All reversible blades of the milling and scraper units have been replaced or rotated, saws resharpened, jointing cutters resharpened, buffing discs replaced. The machine is immediately ready for use. Only the diamond cutter on the profile milling unit has not been replaced but remains sharp. Minor paint touch-ups. Ijdpfxsxd Duds Ahyeal Approx. 3500 operating hours. The machine's condition speaks for itself. Occasionally, the PC reboots while the machine is running (mostly at high room temperatures), but this has never posed a problem for us and work can continue in the meantime. Machine dimensions approx. 4800 x 1200 x 1800 mm (L x W x H) Weight approx. 1900 kg. The machine can be demonstrated at our premises by appointment. We only offer machines that are ready for demonstration in our warehouse—see “other offers from this seller.”

Condition: ready for operation (used), Year of construction: 2003, Brandt Edge Banding Machine Type: Profi KDF 670 Single-sided edge banding machine in right-hand configuration suitable for craftsmanship, for hot-melt adhesive application. Quick-change gluing module for processing PU glue granulate in compliance with adhesive processing regulations. Infrared hot-melt glue activation Automatic edge magazine for coil material for thick PVC/ABS Heavy-duty pressure zone Centrally adjustable top pressure Operating panel at machine infeed PC 16 electronic control Technical Data: Edge thickness: 0.4 - 8 mm Roll cut, max. 3 x 45 mm or 0.8 x 60 mm Workpiece thickness: 8 - 55 mm Feed rate: max. approx. 14 m/min Tool set R = 2 mm (exchangeable for R = 3 mm) Quickmelt gluing module Motor-driven height adjustment for top pressure - PC 16 Adjustable infeed fence Program-controlled adjustment for infeed fence Additional unit for laminate overhang Program-controlled pressure zone Release agent application for workpiece Jointing milling unit Jointing cutter set, Dia End trimming unit with chamfer/straight cut 0 - 15 degrees Pneumatic adjustment for end trimming unit, chamfer/straight Flush milling unit Pneumatic adjustment for milling unit Pneumatic two-point adjustment for vertical tracing rollers Jointing unit 0 - 25 degrees, synchronous flush milling Radius cutter set (exchangeable for chamfer cutter) Program adjustment for edge thickness Pneumatic adjustment for side tracing rollers Profile milling unit above and below - For profiling/flush trimming of end edges on post- and softforming parts and corner rounding of thick PVC edges. / Wood edges possible to a limited extent Scraper with quick-change heads Pneumatic adjustment for scraper Flat scraper glue joint Cleaning agent application for workpiece Buffing unit, 2 motors Electrical and mechanical preparation of the edge banding machine for integration of Ligmatech workpiece return conveyors ZHR01/ZHR02/ZHR15 Weight: 3000 kg Ijdpfxsx Nrtno Ahysal Total connected load: 15 kW Length: 5880 mm Location: ex-site customer - Immediately available - System must be dismantled by the buyer

Condition: used, machine/vehicle number: 008365, Position 1: Single Edgebanders BRANDT - HOMAG-AMBITION 1650 - TFU 140/R/20 Iodpfex Swf Uox Ahysal Position 2: Panel Return Systems BRANDT - HOMAG-AMBITION 1650 - TFU 140/R/20

Condition: good (used), Modular aggregate unit, format processing unit, machining unit, milling unit, form milling unit, jointing milling unit, end-cutting unit, double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -Manufacturer: Homag, cutting units from edgebanding machine BRANDT KM 36 -Engines: Homag type LF-40-L / Perske KNS 22.08-2 -Power: 0.27 kW / 12000 rpm / 10800 rpm -Voltage: 220 V / 200 Hz -Pneumatic components: Bosch -Individual components: see photos -Price/Sale: complete -Overall dimensions: 500/560/H670 mm Iajdpfsgy Da Ssx Ahyjl -Weight: 51 kg

Condition: excellent (used), Year of construction: 2010, Single-sided edge banding machine for processing straight workpiece edges as well as applying and post-processing various edge materials in both longitudinal and transverse feed directions. OVERVIEW OF THE EQUIPMENT CONFIGURATION: - POWER CONTROL PC 20+ electronic control - PU upper pressure rollers instead of rubber rollers - Workpiece gap optimization - Infeed fence extension by 300 mm with additional device for laminate overhang - JOINTING MILLING UNIT 2 x 2.2 kW 200 Hz - GLUING UNIT A12 with automatic edge feeding – Quickmelt application unit – Standard application unit interchangeable for PU glue - Pressure zone with motorized adjustment - END TRIMMING UNIT BEVEL/STRAIGHT 2 x 0.35 kW - PNEUMATIC ADJUSTMENT END TRIMMING BEVEL/STRAIGHT - PNEUMATIC 2-POINT ADJUSTMENT END TRIMMING - PRE-MILLING UNIT 2 x 0.55 kW counter-rotating – with PNEUMATIC 2-POINT ADJUSTMENT (flush and radius/chamfer milling) – Program control for side tracing rollers stepless and edge thickness Iedpfx Ahex S I Iysyeal – Multi-roller tracing - MULTIFUNCTION PROFILE MILLING UNIT 2 x 0.4 kW with exchange system and quick-change heads - PROFILE SCRAPER WITH QUICK-CHANGE HEADS - Special tracing for profile scraper - PNEUMATIC ADJUSTMENT SCRAPER - GLUE JOINT SCRAPER - POLISHING UNIT - RELEASE AGENT SPRAY UNIT WORKPIECE - CLEANING AGENT SPRAY UNIT WORKPIECE

Condition: excellent (used), Year of construction: 2010, operating hours: 2,560 h, functionality: fully functional, total length: 5,760 mm, workpiece height (max.): 60 mm, edge thickness (max.): 12 mm, height adjustment type: electric, plate height: 60 mm, Brandt 1650 Highflex with Return Conveyor and PU Glue Box, Excellent Condition Year of manufacture: 2010 Operating hours: 2,587 h Total edge length processed: 216,000 m Maximum edging thickness: 12 mm Maximum panel thickness: 60 mm Maximum thickness of roll material: 3 mm Minimum workpiece width: 70 mm Maximum feed speed: 18 m/min Feed speed: infinitely variable Height adjustment: motorized Glue system: granulate Pre-melter BRANDT glue system QUICKMELT KD 2 x PU glue pots Strip magazine Jointing milling unit End trimming unit with 2 motors Flush/radius/bevel stations: 1 Corner rounding unit with 2 motors Scraper unit Profile scraper, flat scraper Buffing unit Aggregates sequenced NC axis/axes Version: right-handed machine Machine length: 5,760 mm Conformity mark: CE Return conveyor: Ligmatech Boomerang PU glue box Still in operation, inspection recommended, available by arrangement No warranty Iodpjvnwf Uefx Ahysal Pick-up only, forklift available Net price edgebander: €26,000 plus VAT Net price panel return conveyor: €7,000 plus VAT Machines can also be purchased separately Price negotiable

Condition: used, BRANDT highflex 1440 edge bander well equipped, Initial milling cutters glue application pneumatic preliminary guillotine pressure rollers finished cutting saws top-bottom milling unit 2 x finishing unit profile scraper flat scraper polisher the machine has nc milling cutter control and a pneumatic package max. element height 60mm max. veneer thickness in a roll 3mm Iaodpfx Ahsv H D S Ssyol max. feed 14m/min the machine is functional, can be tested before purchase

Condition: used, Year of construction: 2012, Year of manufacture: 2012 Iajdpfx Ahjx Sa Daoysl Maximum edge band thickness: 12 mm Maximum panel thickness: 60 mm Maximum thickness of roll material: 3 mm Minimum workpiece width: 70 mm Max. feed rate: 18 m/min Feed rate infinitely adjustable Motorized height adjustment Granulate glue application system with motorized adjustment Pre-melter BRANDT QUICKMELT KD glue system Strip loader Milling unit End trimming saw unit with 2 motors Leveling/radius/bevel station – 1 station Corner copying unit with 2 motors Scraping unit Profile scraper, flat scraper Polishing unit Units with sequential operation NC axis Right-side execution Machine length: 5,760 mm CE conformity mark Description errors may occur during transcription.

Condition: used, machine/vehicle number: 008367, Type of edging: Thin edge, Thick edge, Solid wood Iasdpfjx Swfhox Ahyel Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 12 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: good (used), Finishing unit, buffing unit, modular unit, format processing unit, double-end tenoner, edge processing machine, after the scraper for edge processing machine -Finish unit: from BRANDT KM 35 edgebanding machine -Motor: ATB 0.25 kW -Speed: 2820 rpm - laterally adjustable -Height: adjustable Iajdpfx Aogy T I Ejhyjl -Dimensions: 480/250/H490 mm -Weight: 29 kg

Condition: excellent (used), Year of construction: 2012, Brand KDF110 Optimat Ambition - only 1150 hours Brand: Brandt Model: KDF 110 Year of manufacture: 2012 M-Nr.: 0-261-20-6960 Control system: Easy Control 10+ contactless line control, feed-regulated with start-stop optical-indicative sensors Display: LCD, 4 x 20 characters, 4 program memory slots Configuration: Chain conveyor feed: Standard equipment with central lubrication for the transport chain. Top pressure rollers / product guidance: Central control, 2 roller tracks Jointing milling unit: 2 x 0.75 kW, 200 Hz including jointing cutter set in DIA version with manual positioning via Siko counter, max. 3 mm removal and max. 40 mm workpiece thickness Gluing unit: A3 gluing station for hotmelt glue with option for PU application, magazine, pressure zone with electro-pneumatic 2-point positioning via central control unit Pressure zone: First roller driven and 2 free-running rollers for excellent and consistent compression End trimming unit: 0.18 kW, 12,000 rpm Profile milling unit: 2 x 0.27 kW, 200 Hz, 12,000 rpm, counterrotation, 3-position adjustment chamfer/radius (R2), overhang and straight, max. 3 mm edge thickness with Siko counter Profile scraper: Max. 3 mm edge thickness Iedoxvirfopfx Ahysal Surface scraper: Reversible blade Chain width: 80 mm Edge material in rolls: 0.4 – 3 mm End trimming device: 0.4 – 3.0 mm Edge height: max. workpiece height + 5 mm Workpiece thickness: 8 – 40 mm Minimum workpiece width: • For workpiece thickness 8–22 mm: 70 mm • For workpiece thickness 23–40 mm: 120 mm (Depending on workpiece length) Workpiece overhang: 38 mm Edge cross-section: max. for PVC 135 mm² (max. 6 mm) Roll diameter: max. 830 mm Feed speed: 8 m/min Working height: 950 mm Pneumatic connection: min. 6 bar Overall length: 3,672 mm Location: ex stock 54634 Bitburg - Immediately available -

Condition: used, Year of construction: 1996, Edge thickness: 0.4 - 12 mm Roll edge: 3 x 45 mm or 0.8 - 60 mm Minimum workpiece width: 65 mm Minimum workpiece length: 160 mm Workpiece thickness: 10 - 55 mm Feed rate: 13 m/min Pre-milling (joining) Glue pot Quickmelt Gluing unit Trimming Flush trimming Chamfering Radius trimming Corner rounding Flat scraper Buffing unit Machine dimensions: 7450 x 1220 x 2400 mm Weight: 3000 kg Storage location: Nattheim Iaodpfxevvkd Te Ahyol

Condition: used, machine/vehicle number: 008363, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: PUR Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 18 m/min Maximum panel thickness: 60 mm Isdpsx Swddsfx Ahysal Operating Units: 7 nr

Condition: good (used), Finishing unit, modular unit, format processing unit, double-end tenoner, edge processing machine, scraper for edge processing machine -Manufacturer: Homag, profile scraper from edge banding machine BRANDT KM 36 / KM35 Ijdogylq Sjpfx Ahyjal -Quantity: 1 piece available -Dimensions: 510/430/H570 mm -Weight: 62 kg

Condition: good (used), Year of construction: 1981, Radius/flush milling machine, edge milling machine, edge router, shaped parts milling machine Iasdpfx Ahsb A Hfqoyel For simultaneous upper and lower radius/flush milling of protruding edge materials on straight edges as well as curved workpieces with inside and outside radii. -Built-in milling cutters: 30° -Dimensions: 1000/600/H1450 mm -Weight: 60 kg