Used Brandt Kdn 330 for sale (90)

Condition: used, Year of construction: 2004, Used machine Year of manufacture: 2004 with gluing unit for hot-melt adhesive granules Glue reservoir located below the glue roller Predpfx Ajxya Rtjdmjd Glue application to the workpiece via glue roller in both co-rotating and counter-rotating modes automatic edge magazine for coil material and fixed lengths Pressure zone with pneumatically-driven main pressure roller and special post-pressure rollers to compact the upper and lower glue joint Centrally adjustable upper pressure Central manual chain conveyor lubrication Control panel at machine infeed End trimming unit (saw aggregates) for front and rear edge overhang with high-precision linear guides 2 motors, each 0.18 kW Swivel range for straight and bevel cutting 0–15 degrees Flush-milling unit, top and bottom, with vertical and horizontal tracing Swivel range 0–15 degrees with 2 milling motors, each with replaceable insert cutter combinations (straight/radius) Digital counters enable rapid and precise, i.e., repeatable, settings Two-point pneumatic adjustment for upper and lower milling motors Scraper unit for finishing processing with horizontal/vertical tracing Support table extendable up to 350 mm Integrated section control for contactless operation of processing functions. Settings via keyboard and LED display Workpiece thickness: 8–50 mm Edge thickness: 0.4–3 mm Feed speed: approx. 9 m/min Connected load: 4.1 kW Compressed air connection: 6 bar Weight: approx. 750 kg Machine length: 3,150 mm Availability: short term Location: Flörsheim

Condition: used, Year of construction: 2006, Used machine Year of manufacture: 2006 Equipment and technical specifications: - With glue application unit for hot melt adhesive granulate - Suitable for processing PU adhesive granulate in compliance with adhesive processing regulations - Glue reservoir located beneath the glue roller - Glue application to the workpiece via glue roller in both co- and counter-rotation Psdpfxjwkbd Ee Admsrd - With contact heating shoe for preheating the workpiece - Automatic edge magazine for rolls and fixed lengths - Pressure zone with pneumatically driven main pressure roller and special follow-up pressure rollers to compact the top and bottom glue joints - Centrally adjustable top pressure - Central manual chain lubrication - Control panel at machine infeed - End trimming aggregate: - For trimming front and rear edge overhang; high-precision linear guide - 2 motors, each 0.18 kW - Tilt range for straight and angled cuts: 0–15 degrees - Flush milling aggregate: - Top and bottom with vertical and horizontal sensing - Swivel range 0–15 degrees with 2 milling motors using interchangeable straight/radius cutter combinations - Digital counters enable fast and defined, i.e. repeatable, adjustments - Two-point pneumatic adjustment of top and bottom milling motors - Scraper unit for finishing, with horizontal/vertical sensing - Extendable workpiece support up to 350 mm - Integrated section control for contactless operation of processing functions. Adjustable via keypad and LED display - Workpiece thickness: 8–50 mm - Edge thickness: 0.4–3 mm - Feed speed: approx. 9 m/min - Connected load: 4.1 kW - Compressed air connection: 6 bar Machine length: 3,150 mm Weight: approx. 750 kg Availability: short-term Location: Röllbach

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, workpiece height (max.): 50 mm, edge thickness (max.): 3 mm, rotational speed (max.): 10,960 rpm, Equipment: CE marking, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum panel thickness: 50 mm Minimum panel height: 8 mm Maximum panel height: 50 mm Minimum edge thickness: 0.4 mm Maximum edge thickness: 3 mm Number of positions: 1 Psdpfxjxw Tuge Admord Unit 1 Unit: End trimming Number of motors: 2 Automatic engagement by time: yes Motor power: 0.18 kW Speed: 10,800 rpm Unit 2 Unit: Edge milling Number of motors: 2 Automatic engagement by time: yes Motor power: 0.27 kW Speed: 10,960 rpm Unit 3 Unit: Edge scraper Control system: BFS MACHINE DETAILS Installed total power: 4 kW EQUIPMENT Upper pressure Pressure by spring-loaded rollers Panel support guide Magazine for the coil EVA glue system Hot-melt glue pot Edge pressure roller track Number of pressure rollers: 3 CE marking

Condition: like new (used), Year of construction: 2010, machine/vehicle number: 0-261-20-4583, Edge banding machine BRANDT , Type O KDN 200 Ambition 1200, used, Year of manufacture 2010 Air pressure 6 bar The power supply voltage 400V – 3 ph - 50 Hz Total power 4 kW Work piece thickness from 0, 3, 4 to -8,50 mm Extraction diameter 3 x 60 working height 950 mm Feed speed/ Sealing side speed: 10m/min Coil cut off max: 0,4 mm -3,0x45 mm noise emission db(A) 84 to 87 Transport/overall dimensions L3.450xW1300xH2180mm Podpeh Ak D Usfx Admjrd Net weight 1200 kg Gluing, End cutting, Top & Bottom trimming, Scraping Price Euro 4900 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, feed rate X-axis: 11 m/min, workpiece height (max.): 40 mm, edge thickness (max.): 6 mm, rotational speed (max.): 12,000 rpm, Equipment: CE marking, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. feed speed: 11 m/min Maximum panel thickness: 40 mm Min. panel height: 8 mm Max. panel height: 40 mm Min. edge thickness: 0.3 mm Max. edge thickness: 6 mm Psdpfxjxw Ttve Admjrd Maximum spindle speed: 12,000 rpm MACHINE DETAILS Trimming unit Unit: Format cutting Unit: Trimming Automatic engagement by time Motor power: 2.2 kW Edge heating lamps Coil magazine Number of positions: 1 Gluing system Hot melt glue pot Edge pressure roller conveyor Number of pressure rollers: 3 Edge processing unit 1 Unit: End trimming Number of motors: 2 Automatic engagement by time Motor power: 0.18 kW Maximum speed: 12,000 rpm Edge processing unit 2 Unit: Top/bottom trimming Number of motors: 2 Motor power: 0.27 kW Maximum speed: 12,000 rpm Edge processing unit 3 Unit: Multifunction Number of motors: 1 Motor power: 0.35 kW Maximum speed: 12,000 rpm Edge processing unit 4 Unit: Scraper Edge processing unit 5 Unit: Buffing Number of motors: 2 Motor power: 0.1 kW Total installed power: 13 kW EQUIPMENT Control system: PC 16 CE marking

Condition: used, Year of construction: 2010, operating hours: 3,084 h, total length: 5,500 mm, total height: 1,650 mm, total width: 850 mm, - Machine available from: 2025-11-26 - Details: - └ Description: Includes rolling tables, does not include fencing. - Year: 2010 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: - Operating hours: 3084 - Number of units [pcs]: 9 - └ 1st unit type: Milling unit - └ 2nd unit type: Glue unit - └ 3rd unit type: Cap unit - └ 4th unit type: Pre-milling unit - └ 5th unit type: Milling unit - └ 6th unit type: Radius scraping unit - └ 7th unit type: Grooving unit - └ 8th unit type: Preheating unit - - Tools available: No - └ 9th unit type: Brushing unit - Min. edge band thickness [mm]: 0.4 - Max. edge band thickness [mm]: 8 - Min. panel thickness [mm]: 8 - Max. panel thickness [mm]: 60 - Min. feed speed [m/min]: 8 - Max. feed speed [m/min]: 14 - Options: Return transport - Voltage [V]: 230 - Current consumption [A]: 23 - Fuse [A]: 25 - Transport dimensions: 5500mm x 850mm x 1650mm (l x w x h) - Transport packages [pcs.]: 5 Financial information Pjdpfxjxyx U Rj Admord VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 2005, Brandt KDF 530 C edge banding machine with jointing, corner rounding, two scraper blades and Riepe spraying units. Predpfsxd Dudex Admod A video of the machine in operation can be provided upon request. The machine is highly automated. Edge thickness: approx. 0.4 – 8 mm Workpiece height: approx. 10 – 50 mm Feed speed: approx. 11 m/min Soundproof hood Extendable workpiece support Extraction connection: 1x200 mm, 1x100 mm, including the pictured ducting PC16 control with color display for easy operation of the machine Units: Manual pressure adjustment with SIKO counter Manual infeed fence adjustment with SIKO counter Riepe separating agent spraying unit Jointing cutter with Leitz Whispercut diamond cutters, sharpened Gluing unit switchable for both co-rotation and counter-rotation Pressure zone with 3 rollers Cut-off saw with 2 motors, for straight or beveled trimming (program controlled) Combination milling unit with motorized side adjustment Radius scraper blade R2, pneumatically adjustable Corner rounding unit R2 with 1 motorized diamond cutter, pneumatically adjustable for thin or thick edges Glue joint scraper blade, pneumatically retractable with large roller Riepe cleaning agent spraying unit Buffing unit Hood locking mechanism CE marking Operating manual as folder and CD All indexable inserts for the milling units and scrapers have been replaced or rotated, saws sharpened, jointing cutters sharpened, buffing discs replaced. The machine is immediately ready for use. Only the diamond cutter of the profile cutter has not been replaced, but is still sharp. Minor paint touch-ups carried out. Approx. 3500 operating hours. The condition of the machine speaks for itself. Occasionally, the computer reboots while the machine is running (mainly in high ambient temperatures), but this has not been an issue for us, as operation can continue during the reboot. Machine dimensions: approx. 4800 x 1200 x 1800 mm (LxWxH) Weight: approx. 1900 kg. The machine can be demonstrated at our premises by appointment. We only offer machines that are ready for demonstration in our warehouse – see "more offers from this supplier."

Condition: used, Year of construction: 1996, Edge thickness: 0.4 - 12 mm Roll edge: 3 x 45 mm or 0.8 - 60 mm Minimum workpiece width: 65 mm Minimum workpiece length: 160 mm Workpiece thickness: 10 - 55 mm Feed rate: 13 m/min Pre-milling (joining) Glue pot Quickmelt Gluing unit Trimming Flush trimming Chamfering Radius trimming Corner rounding Flat scraper Buffing unit Machine dimensions: 7450 x 1220 x 2400 mm Weight: 3000 kg Storage location: Nattheim Prsdpfx Adovvkd Tjmed

Condition: ready for operation (used), Year of construction: 2001, Edgebander BRANDT OPTIMAT KD 68 CF - year of production 2001 Predpfx Adjhcitremjd - DTR TECHNICAL SPECIFICATIONS: machine tool adapted to the processing of PVC / ABS edges veneer up to 3 mm thick and wooden sticks up to 9 mm thick pre-cutter - plate milling tape pressure glue tank, hot melt glue granules, additional glue application roller heated strip of tape guillotine - pre-cutting of the veneer 3 pressure rollers 2 ready-to-cut ball crushing units 2 milling aggregates for edge shaping (radial milling cutters) an aggregate for making corners (milling) sanding units - for removing excess glue polishing aggregates max. workpiece thickness 50 mm min. workpiece width 60 mm min. element length 160 mm feed speed 96 m / min total power 10.8 kW diameter of the extraction port 120 mm dimensions (length / width / height) 5700/1200/2100 mm weight 2000 kg

Condition: good (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 0 - 251 - 20 - 4507, Due to a switch to solid wood processing, this machine has been used very little and is in good condition. Available for viewing in the workshop. Prjdpfxjxzp Uwe Admjd

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, feed rate X-axis: 11 m/min, edge thickness (max.): 3 mm, plate height: 60 mm, rotational speed (max.): 12,000 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum feed speed: 11 m/min Maximum panel thickness: 60 mm Minimum panel height: 8 mm Maximum panel height: 60 mm Minimum panel width: 70 mm Minimum edge thickness: 0.4 mm Maximum edge thickness: 3 mm Number of working units: 5 Maximum rotation speed: 12,000 rpm MACHINE DETAILS Unit: Pre-trimming unit Unit: Finishing/Adjustment unit Automatic engagement by time: yes Motor power: 2.2 kW Edge pre-heating lamps Coil magazine Number of positions: 1 Adhesive system Glue pot for hot-melt glue Prefuser for hot-melt glue Edge pressure roller track Number of pressure rollers: 3 with NC positioning Edge processing unit 1 Unit: End trimming unit Number of motors: 2 Maximum processing speed: 11 m/min Motor power: 0.18 kW Maximum rotation speed: 12,000 rpm Edge processing unit 2 Unit: Edge milling unit Number of motors: 2 with NC positioning Motor power: 0.55 kW Maximum rotation speed: 12,000 rpm Edge processing unit 3 Unit: Edge scraper Pedpfx Adoxw Tngsmjrd Edge processing unit 4 Unit: Glue scraper Total installed power: 13 kW EQUIPMENT Control system: EASY CONTROL EC 10+ CE marking

Year of construction: 2004, condition: not inspected (used), Brandt Optimat Edgeband trimmer with edge trim Bought by us as a used machine for a product line that didn't launch. Was functioning when decommissioned, we barely used it. Prodpfoxguhgox Admod

Condition: excellent (used), Year of construction: 2012, Brand KDF110 Optimat Ambition - only 1150 hours Brand: Brandt Model: KDF 110 Year of manufacture: 2012 M-Nr.: 0-261-20-6960 Control system: Easy Control 10+ contactless line control, feed-regulated with start-stop optical-indicative sensors Display: LCD, 4 x 20 characters, 4 program memory slots Configuration: Chain conveyor feed: Standard equipment with central lubrication for the transport chain. Top pressure rollers / product guidance: Central control, 2 roller tracks Jointing milling unit: 2 x 0.75 kW, 200 Hz including jointing cutter set in DIA version with manual positioning via Siko counter, max. 3 mm removal and max. 40 mm workpiece thickness Gluing unit: A3 gluing station for hotmelt glue with option for PU application, magazine, pressure zone with electro-pneumatic 2-point positioning via central control unit Pressure zone: First roller driven and 2 free-running rollers for excellent and consistent compression End trimming unit: 0.18 kW, 12,000 rpm Profile milling unit: 2 x 0.27 kW, 200 Hz, 12,000 rpm, counterrotation, 3-position adjustment chamfer/radius (R2), overhang and straight, max. 3 mm edge thickness with Siko counter Profile scraper: Max. 3 mm edge thickness Surface scraper: Reversible blade Chain width: 80 mm Edge material in rolls: 0.4 – 3 mm End trimming device: 0.4 – 3.0 mm Edge height: max. workpiece height + 5 mm Workpiece thickness: 8 – 40 mm Minimum workpiece width: • For workpiece thickness 8–22 mm: 70 mm • For workpiece thickness 23–40 mm: 120 mm (Depending on workpiece length) Workpiece overhang: 38 mm Edge cross-section: max. for PVC 135 mm² (max. 6 mm) Roll diameter: max. 830 mm Feed speed: 8 m/min Pedoxvirfepfx Admjrd Working height: 950 mm Pneumatic connection: min. 6 bar Overall length: 3,672 mm Location: ex stock 54634 Bitburg - Immediately available -

Condition: used, Year of construction: 2002, Machine length: 6240 mm Weight: 2400 kg Power consumption: 14 kW Extraction diameter: 120 / 140 mm Storage location: Nattheim Prsdpfx Ajvvkfwsdmed

Condition: like new (used), pre-milling unit granulate glue station pneumatic pre-cut guillotine pressure zone with three rollers unit with two precision trimming saw blades top/bottom milling unit with profiling cutters profile scraper Pedpexz Rghefx Admord top/bottom flat scraper automatic conveyor lubrication year of manufacture: 2012

Condition: good (used), Year of construction: 2006, - Glue pot Predpfx Aeibdyqsdmsd - Conversion: carried out by the company Hüttenhölscher in Verl - Application: glue application line for handle strips - Vacuum table: included - Automatic pressure zone: included

Condition: used, machine/vehicle number: 006710, Type of edging: Thin edge, Thick edge, Solid wood, Veneer Gluing System: EVA Hotmelt, Hot Air Prsdjqy Em Topfx Admsd Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 11 m/min

Condition: good (used), BRANDT highflex 1440 edgebanding machine well equipped, possibility to check before buying Pedet Hxxpjpfx Admsrd pre-cutters application of glue pneumatic pre-application guillotine pressure rollers pre-cutting balls top and bottom pre-milling unit 2 x earning-multifilling unit profile cyclin flat cyclin polisher machine has nc cutter control and pneumatic package max workpiece height 60mm max thickness of veneer in a roll 3mm feed rate max 14m/min Machine well maintained in very good condition

Condition: used, Year of construction: 2011, Type KDF 220 C Year: 2011 Unit controlled via display Gluing unit End trimming saw unit Flush milling unit Corner copying unit Radius scraper Surface scraper Edge thickness: 0.4 - 3 mm Workpiece thickness: 8-50 mm Podpfx Aoxc N Hvodmerd Feed rate: 10 m/min Total power: 9.5 kW Length: 4150 mm Weight: 1150 kg €19,990 incl. VAT, stated on the invoice

Condition: reconditioned (used), Refurbished edge banding machine BRANDT AMBITION 1440 Prjdow S E Rqepfx Admsd

Condition: used, Year of construction: 2008, functionality: fully functional, Type: Edgebander - single sided Manufacturer: BRANDT Model: Optimat KDF 550 C Year: 2008 Podoxwwb Rspfx Admerd Location: Lithuania Terms: as-is where-is Board thickness 60 mm Edge thickness 8 mm Feed advance 11 m/min Length x width x height 5860.0 × 1560.0 × 230.0 Weight 2600 kg Feed speed: 11 m/min Workpiece thickness: 8 – 60 mm / edge thickness: 0.4 – 8 mm / working height: 950 mm Electricity supply: 400 v – 3 phase – 50 hz / pneumatic pressure: 6 bar / noise emission level: 80…87 db(a) Extraction diameter: 1 × 120 mm / 2 × 100 mm / roll separation: max. 3. 0 × 45 mm / 0. 8 × 65 mm

Year of construction: 1988, condition: used, - with lateral crosscut saw Psdjbaz E Aspfx Admsrd

Condition: used, machine/vehicle number: 005832, Type of edging: Thin edge, Thick edge, Solid wood, Veneer Gluing System: EVA Hotmelt Premilling Unit: yes Psdpfxeiiiyhe Admerd Corner Rounding Unit: yes Max feed speed: 11 m/min

Condition: used, machine/vehicle number: 005793, Type of edging: Thin edge, Thick edge, Solid wood, Veneer Gluing System: EVA Hotmelt Psdpehwkafofx Admerd Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 11 m/min

Condition: used, machine/vehicle number: 007517, Type of edging: Thin edge, Thick edge, Solid wood Psdpfx Adowuz E Remsrd Gluing System: EVA Hotmelt, Hot Air Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 18 m/min Maximum panel thickness: 60 mm Operating Units: 9 nr