Form milling machine

BRANDT OPTIMAT F 13

Condition: used, Year of construction: 2000, machine/vehicle number: 0-260-06-0228, Foot control 1200 x 800 mm suction nozzle 80 mm pneumatic connection cable + plug 16 A 1 set of operating tools 1 set of sensing rollers Guelhcdwjigadlo Djd

Condition: used, Brandt Optimat KD-83-F Edge thickness 0.4 -12 mm Automatic control panel - PLC control Pre-milling unit for pre-processing before the gluing part Automatic edge magazine for roll and strip material Gluing unit with quick heating tank / INFRARED control Guslowp Iwcehcdw Ded Workpiece height 10 - 55 mm Pneumatic pressure unit End trimming unit for roll and strip material up to 12 mm edge thickness with adjustment from 0-15° bevel on saw blades Milling unit, flush trimming, radius trimming, bevel trimming - 25° Scraper unit Buffing unit Soundproof cabin CE version Machine is in EXTREMELY WELL MAINTAINED CONDITION from joinery liquidation - artisanal operation ex location

Condition: used, machine/vehicle number: 007517, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, Hot Air Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 18 m/min Maximum panel thickness: 60 mm Operating Units: 9 nr Gjlhowuz E Rjcdw Deud

Condition: ready for operation (used), Year of construction: 2008, This BRANDT Optimat KDF 550 was manufactured in 2008. It features a machine length of 5860 mm, power requirement of 11.5 kW, and a weight of 2600 kg. Capable of handling workpiece thickness from 8 to 60 mm and edge thickness from 0.4 to 8 mm, it's ideal for precise edgebanding tasks. Consider the opportunity to buy this BRANDT Optimat KDF 550 edgebander. Contact us for more information. Gslhswug Uwscdw Doud Application Types Edge Banding

Condition: used, Year of construction: 1996, Edge thickness: 0.4 - 12 mm Roll edge: 3 x 45 mm or 0.8 - 60 mm Minimum workpiece width: 65 mm Minimum workpiece length: 160 mm Workpiece thickness: 10 - 55 mm Feed rate: 13 m/min Pre-milling (joining) Glue pot Quickmelt Gluing unit Trimming Flush trimming Chamfering Radius trimming Corner rounding Flat scraper Buffing unit Machine dimensions: 7450 x 1220 x 2400 mm Weight: 3000 kg Storage location: Nattheim Guelhcdevvkd Tjw Dsd

Condition: used, Year of construction: 2006, Used machine Year of manufacture: 2006 With gluing unit for hot melt adhesive granulate Processing of PU adhesive granulate possible, subject to adhesive processing regulations Glue reservoir located below the glue roller Application of glue to the workpiece via glue roller in both co- and counter-rotation With contact heating shoe for preheating the workpiece Automatic edge magazine for roll material and fixed lengths Pressure zone with pneumatically operated main pressure roller and special secondary pressure rollers to consolidate the upper and lower glue joints Centrally adjustable top pressure Central manual chain track lubrication Control panel at the machine infeed Cross-cut saw unit for front and rear edge overhang; high-precision linear guide 2 motors, each 0.18 kW Swivel range for straight and bevel trimming: 0-15 degrees Flush milling unit top and bottom with vertical and horizontal tracing Swivel range 0-15 degrees with 2 milling motors and reversible insert combination (straight/radius) Digital counters allow for fast and precise, i.e., repeatable, settings Two-point pneumatic adjustment for upper and lower milling motors Scraper unit for finishing with horizontal/vertical tracing Extendable workpiece support up to 350 mm Integrated track control for contactless control of processing functions. Adjustable via keypad and LED display Workpiece thickness: 8 - 50 mm Edge thickness: 0.4 - 3 mm Feed speed: approx. 9 m/min. Connected load: 4.1 kW Compressed air connection: 6 bar Weight: approx. 750 kg Machine length: 3,150 mm Guslhcjwkbd Eedw Djd Availability: short-term Location: Röllbach

Condition: excellent (used), Year of construction: 2015, I sell the fully equipped edge banding machine BRANDT Optimat KDF 440 C, year 2015: Configuration: Entry fence servomotorical adjustable Premilling manual adjustable Edge banding EVA glue / Airtec System Schugoma Material pressure zone manual adjustable End cutting saws pneumatic adjustable Tilting radius milling top + bottom servomotorical adjustable Corner rounding 2-motor manual adjustable Radius R2 scrapers pneumatic adjustable Glue scrapers pneumatic adjustable Polishing brushes Cleaning fluid spraying front and back. Control panel Working thickness adjustment servo driven Gjlhswun Irscdw Deud Material height 8-60mm Edge thickness 0,4-8mm Feeding speed 11m/min. Total length including feeding plate 5573mm Total weight 1860kg Only 592.198 Meters edgebanded. Very good condition, fully working! Including full documentation and CE. Available immediately.

Condition: good (used), Year of construction: 2008, machine/vehicle number: 0-260-20-1170, Kantfräs & kap Brandt Type: Optimat FTK 130 No: 0-260-20-1170 Year: 2008 The FTK 130 has been conceived as complementary to edge banding machines. The main application of the FTK 130 is shaped workpieces, where internal as well as external radie can be processed. Also straight workpieces can be easily processed. Shaped workpiece trimming technology For small shops the FTK 130 is offering a flexible and cost effectiv solution for their trimming requirements. In order to process internal and external shapes, the trimming motors are mountedvertically. Milling and cutting units for simultaneous upper and lower radius/clean milling of excess edging material on workpieces with straight edges and on rounded workpieces with internal and outside radie. Cutting unit to precisely cut excess front and back edge trim material. in the longitudinal direction of the working pressure. Gslhoq Ehpaocdw Djud Techn info: Milling unit Workpiece thickness approx. 12-55mm Workpiece width min approx. 30mm Inner radius min.ca.35mm Edging thickness max. approx. 3mm Milling tool 2xWPL radius cutter r=3, diameter 67x21x16mm Milling motors 11000v/min Cutting unit Workpiece thickness 12-55mm The thickness of the edging material max. 3mm Saw blade diameter 100mm Sawing width 3mm Center hole 36mm Compressed air 6 bar, connection 1/2", approx. 2000PA Air consumption per stroke approx. 10NL Extraction power diameter 80mm, 510m3/h, air speed 28m/sec Current 400 volts, 2.5kw 50 hz, 3 phase, 16A Dimensions: 1130x765x1480mm (lxwxh) Weight 320 Kg Stock no: 2001877BXA

Condition: ready for operation (used), Year of construction: 2011, This BRANDT Optimat KDF 650 C edgebander was manufactured in 2011. It features a machine length of 5760 mm, working height of 950 mm, and can handle workpiece thicknesses from 8 to 60 mm and edge material thicknesses from 0.4 to 12 mm. Variable feed speed ranges from 8 to 18 m/min. Weight is 2600 kg. Consider the opportunity to buy this BRANDT Optimat KDF 650 C edgebander. Contact us for further details regarding this machine. Golhcjwug U Dodw Dsud Application Types Edge Banding

Condition: used, Year of construction: 1996, Used machine Year of construction: 1996 Equipment and technical data: Spreading unit consisting of: -roll and fixed length magazine -roll separator -glue applicator -pressure zone Heating system: Glue basin Cross-cut unit Jointing unit Guslhcdwswkbame Ded Universal trimming unit Scraper unit Buffing unit Buffing unit Workpiece thickness: 10-55 mm Workpiece length: min. 160 mm Workpiece width: min. 65 mm Edge thickness: 0.4 - 12 mm Roller cutting: 3 x 45 mm Feed rate: 13 m /min. Pneumatics: 7 bar Availability: Short term Storage location : Flörsheim