Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
5
1 used cycle-controlled lathe Manufacturer: Gildemeister Type: NEF 500 plus 1998. Control: HEIDENHAIN MANUAL PLUS 3110 Swing over bed 500 mm Top width 1000 mm Spindle bore 70 mm Najyt Speeds 3 levels of 8-2800 RPM. Spindle mount Mt 5 11 kW Weight approx. 3 t more
5
turning diameter:550 mm turning length:3000 mm control:SIEMENS Sinumerik 805 swing diameter over slide rest:365 mm L03s7 centre height:275 mm speeds:0 - 2500 U/min engine output:11,5 kW spindle bore:77 mm spindle head:Camlock, Gr. 6 total power requirement:14,0 kW weight of the machine ca.:3.250 kg dimensions of the machine ca.:5,1 x 1,5 x 1,8 m more
11
CNC cycle lathe Fabr.WEILER type: E50X2000 BJ. 1994 Bcp0q07bgx with Hamlet control S3 Drehd. bed: 570mm Drehd. about plan support: 340 mm Turning length: 2100 mm Spindle speeds: 1-2500U/min Spindle bore: 63 mm 3 - jaw Chuck DM. 250 mm Tool holder system with 5 tool bags ready. Bezel Spindle concentricity: 0. 01 mm Guides are good Undercurrent is semi-submerged machine. Machines documentaries available. more
10

Cycle lathe Boehringer DUS 560

More Boehringer Dus 560
Erftstadt, GermanyGermany
6409 km
1993
ready for operation (used)
Control / control: Siemens Sinumerik 805 Maximum turning diameter / Max turning diameter: 570 mm Tip height / Center hight: 280 mm Nbcfr Maximum turning length: / maximum turning length 2000 mm Maximum power / maximum power: 19KW (60% ED) Spindle bore / spindle bore: 62 mm Spindle speed Spindlespeed: 3-2,500 rpm Accessories / equipment: Chip conveyor / chip conveyour Cooling plant / coolant system Sleeve / tool holder Tailstock / tailstock Multifix D tool holder Sandvik Coromant C... more
11

Cycle controlled CNC lathe Gildemeister NEF 500 Plus

Welserstr. 10 E, 51149 Köln, DEGermany
6422 km
1998
unexamined (used)
1 used cycle-controlled lathe Manufacturer: Gildemeister Type: NEF 500 plus 1998. Nunlhai Control: HEIDENHAIN MANUAL PLUS 3110 Swing over bed 500 mm Top width 1000 mm Spindle bore 70 mm Speeds 3 levels of 8-2800 RPM. Spindle mount Mt 5 11 kW Weight approx. 3 t more
4

Lathe - cycle-controlled MONFORTS KNC 5

More Monforts Knc 5
Mülheim an der Ruhr, GermanyGermany dealership location
6390 km
2001
used
turning diameter 500 mm Bbapfpiwsb turning length 1000 mm control MTC K greates pass round over bed 500 mm swing diameter over slide rest 290 mm bed width 360 mm workpiece support - quadratic Multifix C spindle head A8 spindle bore 71 mm Drive 16,5/11 kW turning speeds 2800 U/min total power requirement kW weight of the machine ca. 3,3 t dimensions of the machine ca. 3,3x2,05 m swarf conveyor clamping chuck steady more
5

CNC cycle lathe Pinacho Taurus 260

More Pinacho Taurus 260
Mannheim, GermanyGermany dealership location
6584 km
2002
good (used)
Cycle lathe Pinacho TAURUS 260 control FAGOR year 2002 State good tip height mm 260 swing over bed guide rails mm 530 turning diameter before the longitudinal slide mm 475 turning diameter before the cross slide mm 315 Centre distance mm 1500 Main spindle bore 80 mm Speed range RPM 650-2500 Main motor power kW 17 • incl. new multi fix bracket size C • Transmission of main spindle newly stored Bezel • current with • Interface RS 232 DIMENSIONS Naming unit TAURUS Dimensions - width mm ... more
6
turning diameter 570 mm Bh30af73 turning length 2000 mm control centre height 280 mm turning diameter over slide rest 340 mm bed width 350 mm spindle diameter 100 mm spindle hollow 63 mm transmission ratio 2 spindle turning speed range 1-2500 U/min quill stroke 160 mm total power requirement 15 kW weight of the machine ca. 3,15 t dimensions of the machine ca. 2,75x1,65x1,75 m more
5
turning diameter 554 mm turning length 2000 mm control GE FANUC ALPHA centre height 280 mm swing diameter over face slide 370 mm swing in the gap 830 mm spindle bore 90 mm spindle turning speed range 15 - 1800 U/min spindle nose D 1 - 8" Camlock spindle drive 11 kW feeds - longitudinal 0,03 - 0,4 mm/U feeds - cross 0,015 - 0,2 mm/U rapid travel - longitudinal/face 3 / 1,5 m/min thread - mm pitch 14 mm bed width 400 mm radial face slide travel 310 mm tailstock quill diameter 95 mm tailstock qui... more
6

lathe-conventional-electronic MEUSER M1L

Neuenstadt a.K., GermanyGermany dealership location
6649 km
1986
used
turning diameter 520 mm turning length 2000 mm Gvyt8ulhk Information Meuser M1L: - ø520mm - L 2000mm - incl. chuck 315mm and quick change holder - Restart protection and other safety equipment retrofitted - Oberschlitten has game - Feed does not work more


Lathe - cy...
daily

New machines via email!

Stay updated!
5
Cycle Lathe MONFORTS KNC 5 Year 1995 Control type MTC - K Technical details Gxa8mxtwu Turning diameter 500 mm Turning length 1000 mm Turning diameter over support 290 mm Total power requirement kW Machine weight approx. 3.5 t Space required approx. 3.5 x 1.7 x 1.9 m more
5
turning diameter:510 mm turning length:3000 mm control: centre height:400 mm turning diameter in the gap:850 mm length of gap:160 mm turning diameter over slide:510 mm spindle bore:165 mm spindle turning speed range:1 - 1120 1/min feeds - longitudinal:0,001 - 50 mm/U feeds - cross:0,001 - 50 mm/U rapid traverse longitudinal:10 m/min rapid traverse cross:5 m/min thread - mm pitch:0,1 - 2000 mm thread - inch:1/64 - 112 G/1" thread - module:0,05 - 56 mm quill::MK 6 workpiece weight:3.800 kg main ... more
5

NC cycle lathe GILDEMEISTER NEF PLUS 500/1500

Holzener Str. 50, 58708 Menden, DEGermany
6442 km
1993
ready for operation (used)
NC control: GRUNDIG with contour program Turning diameter over bed: 500 mm. Swing over cross slide: 290 mm. Ndcu9 Centre distance: 1500 mm. Sindeldrehzahl: 8-2800 RPM. Spindle power, 100% Ed: 11 kW. Incl. 3 jaw wedge bar chucks: F 315 with div. jaws, Schnellwechselstahlhaler MULTIFUNCTIONAL fixed size D with various pockets,. Tailstock, MK 5, coolant system, Lynette and documentation. The machine can be seen in consultation under power and is immediately available. Please also my oth... more
6
turning diameter 570 mm turning length 2000 mm control Siemens Sinumeric steady chip conveyor turning dia. in gap 600 mm turning diameter over slide 340 mm spindle bore 63 mm Blrbkojs Tool changer total power requirement 22 kW weight of the machine ca. 4,5 t dimensions of the machine ca. 3,5x1,5x1,5 m more
4

Lathe - cycle-controlled MAS MT 50 CNC

Bühl, GermanyGermany dealership location
6593 km
1998
used
turning diameter 500 mm turning length 1450 mm control HEIDENHAIN MANUAL PLUS greates pass round over bed 500 mm swing diameter over slide rest 350 mm centre height 255 mm centre distance 1500 mm spindle bore 82 mm Hbkysnqd spindle turning speed range 2 - 2400 U/min spindle nose DIN 55027 max. torque on the spindle max. 1055 Nm face slide travel 260 mm 140 mm rapid travel - longitudinal/face 5 m/min tailstock quill diameter 80 mm tailstock quill stroke 180 mm tailstock taper MT 5 total powe... more
3
Gildemeister NEF 500-1500 / cycle lathe, built in 1996, control of Grundig manual plus, turning length 1500 mm, rotation Ø 500 mm, swing over bed top width 500 mm, 1500 mm, spindle bore 70 mm, speeds 3 levels of 8-2800 rpm, spindle mount Mt 5, power 11 kW Bcpgwlfxqg more
6
Tip height 280 mm 9ixztg2sb Top width 2000 mm Swing over bed 570 mm Swing over support 340 mm swing in the bridge 600 mm Workpiece weight betw. Sharp 1.6 t Spindle head DIN 55027 8 Gr. Spindle bore 66 mm Speed stepless 1-2500 RPM 20 kW Feed longitudinal/plan 0.001 - 20 mm / Rev Quill diameter 80 mm Quill stroke 160 mm Recording 5 MK Power 27 kW Weight 3,5 t Dimensions L x W x H 3.9 x 1.9 x 1.8 m Accessories: div. Halter multi fix Gr. 3 3 jaw Chuck DM 250 mm 4 jaw Chuck DM 25... more
6

Lathe - cycle-controlled HARRISON ALPHA 1550 U

Grenzach-Wyhlen, GermanyGermany dealership location
6623 km
2006
used
turning diameter 554 mm turning length 1500 mm control GE FANUC ALPHA centre height 281,5 mm swing diameter over face slide 370 mm spindle bore 102 mm spindle turning speed range 15 - 1800 U/min spindle nose D 1 - 8" Camlock spindle drive 11/15 kW Ihifdxl feeds - longitudinal 0,03 - 0,4 mm/U feeds - cross 0,015 - 0,2 mm/U rapid travel - longitudinal/face 3 / 1,5 m/min bed width 400 mm radial face slide travel 310 mm tailstock quill diameter 95 mm tailstock quill stroke 145 mm tailstock taper ... more
3

CNC lathe control cycle Chevalier FCL 2460 F

Bielefeld, GermanyGermany dealership location
6472 km
2004
excellent (used)
Manufacturer: Chevalier type: FCL 2460 F year: 2004 Neye2 C2d9b9ei Control: Fagor Rotary diameter above bed: 650 mm Umlaufdurchm. ü.Planschlitten: 450 mm Plan travel: 300 mm Turning length: 1500 mm Spindle bore: Approx. 70-75 mm Power: approx. 15 kW Speed range from - until: 20 2000 Facilities Tools: 8 stations Tool carrier: Sauter VDI 40 Live weight: 4000 kg Accessories: 250cc Chuck Tool holders approximately 15 x VDi 40 and spare parts Immediately available. Very good co... more
1

Lathe - cycle-controlled GEMINIS GHT 4-720

Niederhelfenschwil, SwitzerlandSwitzerland dealership location
6726 km
2005
used
turning diameter 570 mm turning length 3000 mm control ----- BASIC FUNCTIONS - number of spindles 1 WORKING RANGE TURNING - swing diameter (max) 720 mm - turning diameter (max) 570 mm - worpiece length (max) 3000 mm Ztexymmt MAIN SPINDLE - spindle bore diameter 104 mm more
9

Cycle lathe Weiler E50

More Weiler E 50
Wallerstein, GermanyGermany
6740 km
1996
excellent (used)
Cycle lathe hamlet E50 Year of construction: 1996 Sinumerik 805T control Tip height: 280 mm Turning length: 2000 mm Swing over bed: 570 mm Swing over cross slide: 340 mm Swing over offset 600 mm Spindle diameter in the vord. Camp 100 mm Spindle bore: 66 mm 100%: 20 kW Speed range: 1-2500 (2 steps) U / min Rapid traverse in X-and Z-direction: 5 / 10 m / min Tailstock Quill diameter: 70 mm Tailstock Quill stroke: 160 mm Tailstock Quill taper: ISO MK 5 Accessories and equipment: 1 ... more
6
CNC lathe cycles Fabr.VDF BOEHRINGER BJ. 1996 Control Siemens 805T Dak9m9d Swing over bed/plan slide: 570 mm / 365 mm Turning length: 2000 mm Spindle speeds: 3-2500U/min Spindle bore: 62 mm 3 - jaw Chuck diameter: 315 mm Multi fix steel holder size: C 1.Luenette u. 1 drilling buck. Complete machine documentation. more
Tip height 260 mm Top width 1500 mm maximum swing over bed 530 mm maximum turning diameter over plan 325 mm Main spindle bore 80 mm Speed range, 2 stages 0-625 / 625-2500 RPM Ycldkf72 Spindle size DIN 55027 Gr. 8 Feed range 0-7000 mm / min Rapid traverse 10 m / min Live recording MK 5 Power of main motor 11 kW Dimensions L x W x H 4400 x 1900 x 1850 mm Weight 3500 kg Accessories / special features: • Cycle control make FAGOR model of 8055 with hard drive • Electronic Handwheel ... more
3
turning diameter 500 mm turning length 1500 mm control CNC-2-Achsen-Zyklen-Steue Llqh7 total power requirement 15 kW weight of the machine ca. 3,3 t dimensions of the machine ca. m more
6
turning diameter max. 475 mm turning length 1.330 mm control Manual Plus greates pass round over bed 475 mm Swing dia. over traverse guideway 260 mm Distance between centres 1.500 mm slide travel X-axis 260 mm slide travel Z-axis ca. 1.350 mm Main spindle: turning speed range - main spindle 1 - 3.000 min/-1 power capacity - main spindel 22 / 15 kW spindle diameter in front bearing 115 mm spindle bore 78 mm max. chucking diameter 250 mm tool clamping MultiFix B 8ukduvz3u turning tool - shaft... more
4

Lathe - cycle-controlled MONFORTS KNC 5

More Monforts Knc 5
Mülheim.an der Ruhr, GermanyGermany dealership location
6388 km
2001
used
turning diameter 500 mm turning length 1000 mm control MTC K greates pass round over bed 500 mm swing diameter over slide rest 290 mm bed width 360 mm workpiece support - quadratic Multifix C spindle head A8 spindle bore 71 mm Drive 16,5/11 kW B9stnwv turning speeds 2800 U/min total power requirement kW weight of the machine ca. 3,3 t dimensions of the machine ca. 3,3x2,05 m swarf conveyor clamping chuck steady more
6
turning diameter 570 mm centre distance 1500 mm control Siumerik 810 D turning length 1250 mm centre height 280 mm material through feed 62 mm workpiece weight max. 400 kg tool taper Capto C6 turning speeds 3 - 2500 U/min tailstock quill diameter 100 mm total power requirement 30 kW weight of the machine ca. 5,2 t dimensions of the machine ca. 4,2 x 2,2 x 2,1 m Jcc0fof 2 gear stages (3-500 / 15-2500 rpm) Wedge bar Forkardt F250 Drilling and milling device 3-point bezel Ø 315mm tailstock Co... more
6
CNC lathe cycles Fabr.Haco FAT type: TUR 560MN BJ. 2002 Control SIEMENS Sienumerik 810 d Manual turn Excess bed turning diameter: 560 mm Überplansupport turning diameter: 300 mm Turning length: 1000 mm P39in7 Spindle speeds up to: 2500U/min Spindle motor: 18,5KW Hydraulic 3 - jaw Chuck dia. Fabr.KITAGAWA. 250 mm Hollow clamping cylinder Werkzeugschnellweckselhalter Fabr.MULTIFIX size: C with accessories and equipment documentation. more
4
Tip height 260 mm Top width 1000 mm maximum swing over bed 530 mm maximum turning diameter over plan 325 mm Speed range, 3 levels 30-1500 rpm Weight approx. 2000 kg Accessories / special features: • Cycle control make FAGOR • interface RS 232 • Manual 8 x turret + quick-change holder system "Multifix" Gr. B • 3-jaw wedge bar Chuck, diameter 250 mm Dwbrry • Good ribbed machine bed • Gears and shafts hardened and ground • Bed guides hardened and ground • Panel sliding doors electri... more
5
Center lathe Ey98otj Make: Giana Distance between Centers: 10.000 mm Centerheight: 570 mm Swing over bed: 1.120 mm ø Swing over support: 780 mm ø Spindle boring: 120 mm ø 4 x Steady rest: 200 / 400 / 500 / 650 mm ø Engine power: 42 kW Stock Number: draai726 more
5
Cycles Lathe Voest Alpine W570E / 2, Year of construction: 1990 Center height 280 mm, Peak width 2000 mm, Circulation diameter over bed 570 mm, Circulation diameter over sliding block 340 mm, Bed width 340 mm, Sliding gate length 700 mm, Sliding gate width 220 mm, Spindle head Gr. 8/6, Spindle bore 63 mm, Drive power: 15/11 kW, stepless speed range 1 - 2500 rpm, Servo feed drive 0,001 - 3 mm / min, Rapid traverse longitudinal / flat 7 / 3.5 m / min, Tapping range metric 0.5 - 1... more
3
Masch.-Nr. A50203 Sph 280 mm Hdzeyhoik Spw 1000 mm Umlauf Ø 550 in Kröpfung 830 mm Spindelbohrung Ø 90 mm Schnellwechselhalter U/min. 140-1800 Reitstock Stellmaße: ca. L 2550 mm x B 1611 mm x H 1720 mm more
4

Lathe - cycle-controlled VOEST ALPINE STEINEL W570

Niederhelfenschwil, SwitzerlandSwitzerland dealership location
6726 km
1990
used
turning diameter 340 mm turning length 1000 mm control ----- WORKING RANGE TURNING - swing diameter (max) 570 mm - turning diameter (max) 340 mm - worpiece length (max) 1000 mm Bba920u78c - workpiece weight max. 1000 kg MAIN SPINDLE - spindle revolutions (min) 85 /min - spindle revolutions (max) 2500 /min X/Z SLIDE - tool fixture: Steel Holder TAILSTOCK - sleeve stroke 160 mm - sleeve diameter 70 mm - t... more
6
turning diameter 560 mm turning length 3000 mm control Siemens 810 T turning speeds 11 - 2240 U/min turning diameter over bed slide 260 spindle bore 72 mm total power requirement 43 kW weight of the machine ca. 5,4 t dimensions of the machine ca. 8x3,5x2,2 m X8pyutprr more
7
Cycles of CNC lathe Fabr.Lange type: LAZ20 BJ. 1993 Bb393litqt Control Grundig manual plus Turning diameter above bed: 540 mm Turning diameter over plan support: 250 mm Turning length: 1200 mm Spindle passage: 80 mm Spindle speeds: 1-2000 RPM Spindle motor: 9,5KW 3-jaw lathe Chuck diameter 250 mm Werkzeugschnellweckselhalter multifunctional fixed size B with 3 holders Complete documentation available. more
2

GILDEMEISTER NEF 520

More Gildemeister Nef 520
Düsseldorf, GermanyGermany dealership location
6391 km
2001
ready for operation (used)
turning-Ø over bed 500 mm turning-Ø over carriage 290 mm between centers 1500 mm spindle bore 70 mm Nci8f speeds 4000 rpm weight appr. 2,7 t CNC-control: HEIDENHAIN more
7

Cycle lathe Seiger LÖW SLZ 500/1000

Ellwangen, GermanyGermany
6719 km
1999
excellent (used)
Cycles controlled lathe Seiger LÖW SLZ 500 Year of construction: 1999 Control: Siemens 840 d / 810 d Swing: 570 mm Top width: 1000 mm Spindle head: Gr 6 Spindle passage: 63 mm Main spindle inner taper: MK 7 Speed: Max 2500U/min. Torque: max. 1600Nm Rapid traverse rate: 10 m / min Tailstock Quill stroke: 160 mm Inner bevel: MK5 Main drive Power: 16 kW Ndni9 Maximum current consumption 60A Weight: 3600kg Dimensions: 3300 x 1800 x 1400 (lxwxh) more
1

NC cycle lathe MONFORTS KNC 5 (1000)

More Monforts Knc 5
Bretzfeld-Schwabbach, GermanyGermany
6656 km
1998
ready for operation (used)
Contour knob, control system K, constant cutting speed. Swing 550/500 mm Top width 1000 mm Material flow 70 mm Speed range approx. 2-3500 RPM. Quill stroke and cone 160 mm / MK 5 15/11 kW Bca9r8p0ba Weight approx. 3 t Accessories: Guard travelling with, fixed bezel, chip conveyor, ready-steel holder with various inserts size 3, electric brakes, manual Chuck SCHUNK Rota-S diameter 200 mm. more
1

Cycle lathe CONTUR Dialog A-50

Wetzlar, GermanyGermany dealership location
6529 km
2018
as good as new (ex-display)
: Control SIEMENS, 828D Basic-T with ShopTurn Swing over bed 500 mm Swing over support 280 mm turning length 1120 mm maximum spindle speed 3000 rpm Spindle motor 9/13,5 kW Spindle bore 86 mm incl. Accessories: Udnbdvh7 Electric 4 positions revolver boot shaft height: 25 x 25 mm, direct clamping (no Exchange System) Manual tailstock automatic central lubrication system Coolant system more
5
Type: Labor 255/E x 1000, Control: Sinumerik 805 Turning diameter over bed: 515 mm, Turning diameter over support: 325 mm, Top width: 1000 mm, Iiotucwf0 Weight: 2300 kg, Spindle speeds: 0-2000 rpm. more
5

CNC lathe Gildemeister NEF Plus

Am Kieswasser 20, 57368 Lennestadt - Elspe, DEGermany
6474 km
1993
good (used)
CNC lathe Make: Gildemeister Type: NEF plus Year of construction: 1993 Control: Grundig Round bed: 500 mm Circulation plan sliders: 290 mm Plan travel: 260 mm Centre distance: 1500 mm Spindle head DIN55027: Size 8 Spindle bore: 70 mm Power 100% ED: 11 kW Speed range: 8-2800 rpm 3 levels Tool holder: Multifix size C Quill diameter: 80 mm Quill stroke: 180 mm Bbws7fcfm0 Quill recording: MK 5 more
4

cycle lathe Chevalier FCL-2160H

Bochum, GermanyGermany dealership location
6409 km
2017
as good as new (ex-display)
look at pdf "technical data & equipment" Mtyxec more
5
turning diameter:560 mm Bbk8djgnr3 turning length:1500 mm control: FAGOR 8055TC max. turning dia. over cross-slide:300 mm cross slide - travel:300 mm Spped range stepless :25- 2000 Diameter of the spindle bore:80 mm Main spindle capacity:7,5 kW Dimensins of the machine (LxWxH):3440 x 1340 x 1750 mm Weight of the machine approx.:3700 kg Included is: Quick tool change system MULTIFIX TYPC with four inserts Three-jaw chuck 315 mm diameter Roller block for bar material more
5
Lathe - cycle Monforts KNC 5: control You can visit machine under power. BJ: 1996 Turning diameter: 500 mm Turning length: 1500 mm Swing over bed: 540 mm Pfitmppj Over slide: 290mm Bed width: 360 mm Tool carrier, square multi fix B, including various steel holder Spindle bore: 82 mm Speed: 2800 RPM Drive: 16.5/11 KW Total power: 30KW Control: MTC K Dimensions: 3300 x 2050 mm more
6

Cycle lathe Gildemeister N.E.F. 520

Beckingen, GermanyGermany dealership location
6468 km
2000
used
Cycle lathe manufacturer Gildemeister Type N.E.F. 520 Year of manufacture 2000 IBN 2001 M9usf Top width 1500 mm Tip height 250 mm Swing over cross slide 290 mm Spindle passage 70 mm tool holder Multifix size C max speed 4.000 rpm Tailstock Tailstock sleeve D = 80 mm Max spindle hub 180 mm Quill taper MK5 before about 350 hours does it main bearing renewed (cost approx. 7.000Euro) with 300mm wedge bar chucks 11 Werkzeuhalter about 44,000 power on hours Machine is in good condit... more
6

Zycklendrehmqaschine Cazeneuve Maxica 590

Eigen Haard 61, 8561 EX Balk, NederlandNetherlands
6242 km
2000
excellent (used)
Cazeneuve Maxica 590 x 1800mm Draaibank Specificatie manufacturer Cazeneuve type Maxica 590 BJ. 2000 Besturing NUM 1060 Somab PL + S3 Draaidiameter 590 Draailengte (t c) 1800 Doorlaat 82mm extra: Nieuwe Bizon drieklauplaat Vaste Bril 315mm various Gereedschaphouders Machinedokumentatie Bbpuzaf3hp more
4

Lathe - Zyklengesteürt VOEST-ALPINE W 570 E/1

Ennepetal, GermanyGermany dealership location
6422 km
1991
used
- Diameter: 570 mm - turning length: 1100 mm - Control: ELESTA - Visulesta 4 - Swing in the crank: 600 mm - turning diameter over cross slide: 340 mm - Spindle bore: 63 mm - spindle speed: 1 - 2500 rev / min - feed - along: 0,001 - 3 mm / U - feeds - 0.001 - 3 mm / U - Rapid long: 7 m / min - Rapid plane: 3.5 m / min - thread - mm pitch: 0,5 - 140 mm - thread - inches: 1/4 - 56 transition / inch. - Coolant tank: 400 liters - workpiece weight: 1000 kg - main motor: 12.9 kW - total power requireme... more
4

CNC-Zylkendrehmaschine, 12 angetr.Wzg. ARINSTEIN Berlin A 500

Am Weinberge 1A, 31535 Neustadt, DEGermany
6500 km
2003
excellent (used)
Control Siemens 810 D 3-jaw Chuck: 315 mm Top width 1000 mm Tip height 285 mm Gvkodw Maximum workpiece diameter 580 mm Maximum diameter over the bed 460 mm Maximum diameter over support 310 mm Traverse path of X-axis 310 mm Travel - Z-axis 900 mm Spindle according to DIN 55 027 Nr. 8, standard 12593-93 Spindle bore 72 mm Main drive Axis - C 18,5 kW Infinitely variable spindle speed 3... 3000 min-1 Spindle torque 1000 NM Transmission ZF 250 Weejvvdd Revolver: 12, Barufaldi VDI 4... more
4
Tour à assistance numérique a banc plat* Marque : CAZENEUVE Modèle : MAXICA 590 Année : 2000 CNC : pl+53 Diam sur le banc : 583 mm Diam sur le chariot : 280 mm Largeur du banc : 436 mm Diam de passage dans la broche : 80 mm Cone CM5 Course maxi du fourreau : 150 mm Vitesse de rotation : 3000 trs/min Puissance broche : 24 kw Distance entre pointe : 1000mm Tourelle multi fixe manuelle Mandrin manuel Mua0h Contre pointe manuelle Dotation de porte-outils Dimension : 2645 X 1362 X 1872 mm Poids : 2... more
6

Universal Lathe Padovani Labor 255

Reiden, SwitzerlandSwitzerland dealership location
6655 km
used
  Digital Display accessories available tip height 255 mm center distance 3000 mm spindle bore 105 mm 1500 mm spindle speed 22 Camlock 8 Lpnlv more


Lathe - cy...
daily

New machines via email!

Stay updated!

to

to

Edit search

SELL IMMEDIATELY
with Europe's market leader for as little as € 0,49 per ad.
Find out more


Phone: +1 312 94 04 581
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close