Koelle hk 63 buy used

Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
5

Planing machines Koelle HK63

More Koelle Hk 63
Schwarzach, AustriaAustria dealership location
6765 km
used
Planing width 630 mm Table length ~ 2000 mm Clearance height 220 mm Motor output 5.5 kW Knives shaft - Strip blades 2pcs Steel rollers Suction pipe for fixed width and set off 2q2y9i Aigner help stop more
1
grinding length:650 mm grinding width:375 mm 2pfqfe grinding height:375 mm Clamping area:900x300 mm grinding spindle drive:3,7/4,5 kW table speeds:2-28 m/min autom. cross feed adjustable:1-60 mm/Hub vertical feed autom.:0,002-0,06 mm vertical rapid traverse:0,15 m/min grinding wheel diameter:300 mm grinding wheel hole diameter:76,2 mm grinding wheel width:50 mm hydraulic pump:1,5 kW cross feed motor:0,3 kW vertical feed motor:1,7 kW weight of the machine ca.:2800 kg dimension (LxWxH) ca.:2800x1... more
11
Planing width 630 mm Table length ~ 2000 mm Clearance height 220 mm Motor output 5.5 kW Knives shaft - Strip blades 2pcs Steel rollers Suction pipe for fixed width and set off Gvn3l0 more
12

Hot mixer Stainless steel PAPENMEIER N-TSHK 630/HCC

MA Barneveld, NetherlandsNetherlands dealership location
6274 km
ready for operation (used)
PAPENMEIER Bs9pybys more
6
Band sawing machine Koelle in very good condition. Type: BS630 roller diameter 630 mm blade guide above and below blade length: 4500 mm blade width of 25 mm maximum cutting height: 340 mm table to adjust 45 degrees, automatic motor brake was retrofitted automatic three-star switch has been retrofitted weight: 600 kg Uqq8qsq0l more
6
 Start Chat

Planing and Dicknehobelmaschine Kölle HK 63

Kempten-Leubas, GermanyGermany
6788 km
good (used)
Conditioner DIckenhobelmaaschine Kölle HK 63 Built in 1974 Technical data: Table length 2100 mm Planing width 630 mm Hefudpbcg Höbelhöe 3-230mm Depth of cut: -max 4mm at the set off -max 8mm at the thick plane Motor 5,5KW 4 cutter Handwheel with dial gauge 1 / 10mm adjustment Outlining feeding whales Gliedrdruckbalken Steel pull-out roller Suction channel for dressing and thick plane Suction connection 160 mm Weight 1400KG more
9
Technical data: Dwannq Brand: Kölle Type: HD 63 -400V Planing width 630 mm Planing height 200 mm Reel in the thicknessing table for wet wood more
6

thickness planing machine Koelle DH63

More Koelle Dh 63
Egenhofen / Herrnzell, GermanyGermany dealership location
6816 km
1985
good (used)
Type: DH63 used machine working width: 630mm MaxWorking height: 220mm 4-blade shaft  segmented platen feed roller: rubber outfeed roller: rubber electricTable stroke feed speeds: 4 / 6 / 12 min E0kazfypi Power: 7,5kW Year of construction: 1985 Location: Warehouse / 82281 Herrnzell more
3
4-drum, speed 5000 RPM. Planing width 630 mm Planing height 220 mm Gh3yfnff8 Feed speed 10 and 16 m / min. Motor 4 kW Maximum chip removal during dressing 3 mm Maximum chip removal during thickness planing 8 mm Fügeanschlag 45 degree angle-adjustable Chip suction pipe D 160 mm 2 rollers in the thicknessing table Steel feed roller, ribbed, Steel pull-out roller, smooth, Dressing table 2100 mm New drive belt Sample planed more
3
 Start Chat

Flachschlifmaschine ELB HK-ORION 635 D (600x400 mm)

Staufenberg, GermanyGermany dealership location
6563 km
1979
used
Flachschlifmaschine Fabr. ELB type HK-ORION 635 D Masch.# 164621279 year 12/1979 Technical data: Erl Grinding length 650 mm Erl Grinding width 375 mm Erl Working height 375 / 345 mm Juplem Magnetic plate 600 x 400 mm Table size 600 x 350 mm Longitudinal movement 650 mm Cross movement 320 mm Vertical movement 375 mm maximum table load of 300 kg Size of the grinding wheel 300 x 50 x 76.2 mm Rapid traverse vertical 0.15 m / min. aut. Feed cross 1-40 m / hub Rapid traverse across 1... more


koelle hk 63
daily

New machines via email!

Stay updated!
4

band saw Koelle BG 63

Hösbach Rottenberg, GermanyGermany dealership location
6602 km
1989
used
Cutting width 600 mm Motor 2,2KW 400V 50 HZ Dust nozzle 120 mm Band leadership up and down Izdwjwh Swiveling worktable 45° Cutting height 330 mm Blade length 4340 mm to 4500 mm G & 2830 M3I2J more
2

Planing Machine KOELLE HD63

Gersfeld, GermanyGermany dealership location
6619 km
used
Weight: 1.100 kg Dimensions: 1,8 x 1,25 x 1,6 m Planing: 630 mm Adjustment Height: 230 mm Knivesl: 2 Pieces Collar Depth max.: 40 mm Cut Rate: 8 mm J8r9sm07 Table Length: 1200 mm Blade Speed: 5000 U/min. Engine Power: 5,5 kW Feed speed: 10 / 16 m/min brake: electrical more
3

Thickness Planer Koelle HD 63

Gersfeld, GermanyGermany dealership location
6620 km
used
planing width. 630 mm planing height 230 mm throat depth max: 40 mm table length: 1200 mm diameter shaft speed: 5000 r / min. Motor power: 5.5 kW, 7.5 HP feed: min 10/16 m / min. Weight: 1100 kg Machine dimensions (L x W x H): 1800 x 1200 x 1600 mm Tpucmn more
1
cleaned, function checked, test run new knives inbuilt table guide rolls adjusted new damper inbuilt machine compl. adjusted used, good condition manufactured by Koelle type DH 63 built in 1988 Masch.-No. 295 planing width ca. 610 mm table-sliding rolls 2 piece adjustable joint pressure plates steel-gates pickup roller feeder 0 / 6 / 9 / 18 m/min. number of cutters 4 piece automatic motor brake cutter system V-ledge - safety cutter spindle digital display for planing height electrical height ad... more
1
Elect./Voltage: 220/440 V, 60 Cy, 3 Ph. Bbyzyhcsgr ADIRA QHX-6325-CBP Up-Acting CNC Brake Press w/DNC Control -- Capacity 70 ton x 99" Bed -- Distance between housing 80.71" -- Stroke 3.94" -- Maximum open height w/o die holder 12.21" -- Throat depth 19.69" -- Speed in mm/sec 70/9/100 mm/sec -- Dimension 125" x 65." x 77" high -- Weight 10,000 [...] with: -- Cybelec 800 CNC Control -- Multi-axis 2D Color XYZR -- Pedestal remote foot and hand control -- Die clamps more
9
Holzma Type HKL-11 Optimat, fully automatic High production angular sawing system MACHINE DATA: Make: Holzma Plattenaufteiltechnik GmbH Model: HKL11/43/22/16 Year of Mfg.: 2006 Serial No.: Main Machine HKL 11 0-241-15-3377 HOLZMA HAU-A 16/12 0-244-15-0684 HOLZMA HEE 38/16 0-243-15-2235 HOLZMA HEE 38/16 0-243-15-2487 HOLZMA HEE 38/16 0-243-15-3422 Condition: Used, in excellent conditions Was installed in the USA, Plant stopped wor... more
5

Machining Center - Universal HERMLE U630T

More Hermle U 630
Wilbertoord, NetherlandsNetherlands dealership location
6307 km
1997
used
x-travel 630 mm y-travel 500 mm z-travel 500 mm spindle taper SK40 spindle turning speed range 7.000 U/min number of tools 20 control Heidenhain 410 9qypnnndk more
4
Metal band saw blades, bandsaw blades Fk07msv -ungebraucht OVP -5 x blades available Award pieces Teeth 2/3 TPI Dimensions 6300 x 41 x 1,3 mm more
6
max. wheel diameter 630 mm gear width 200 mm max. module 10 min. module 1 work accuracy DIN 6 clamping table diameter 710 mm table bore diameter 150 mm Mffvh number of strokes - stepless 35,5 - 560 max. ram stroke 230 mm feeds 3,55 - 40 mm/min radial feed 0,8 - 9 mm/min work-spindle diameter 110 mm total power requirement 28,2 kW weight of the machine ca. 9 t dimensions of the machine ca. 3,8 x 2,3 x 2,5 m build under licence of LORENZ and identically constructed as LS 630 2012 partl. r... more
10

Guillotine Shear Trumpf Tru Shear 5163

Amsterdam, NetherlandsNetherlands dealership location
6220 km
2007
ready for operation (used)
*Later pickup - 15.August 2018"Ser. No. 108544-W, work width 3.050 mm, cut thickness max. 16 mm, electr. Back gauge, 4 support brackets with a T-groove, length 1,500 mm, left bracket with side stopper, 2 protection fences with light barrier, hours operating hours approx.18,950 Hi0upmawg more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Ncce9 MORBARK 636 Rosser Head Style Debarker complete with the following features: -- All new Hoses with only 50 - 60 hours of run time. -- Mounted on Log Channel Input/Output Chain Conveyor. -- Complete with Hydraulic Power Unit. -- 75 HP and 35 HP Motors are on the Power Head. -- Full Tank, Motors, Hoses , Cab with Full controls, etc. are included. -- Previous owner says, "This was working well, and we pulled it out to install the Cambio which wi... more
6
Mitsubishi / Mazak FX 763B BN624E526H01 cards used, normal wear, 100% functional, included with com. photos Cxn3qkn more
6
x-travel 630 (875) mm y-travel 500 mm z-travel 500 mm Control Heidenhain table: Winkel:900x528 weight of the machine ca. 6 t Xydizxwp more
5
Thickness Planer, thickness Planers -Planing width: 630 mm planing height: 200 mm-4 cutter hard-on knife Serrated steel feed roller Wviidud79 Pull-out roller steel smooth -Electr. Table adjustment Adjustable table rolls -Automatic blade Sharpener Dimensions 1400/1100/H1600 mm Weight 1800 kg more
5
Engine type: conventional lathe Make: TOS Type: SUI 63 year: ca. 1990 Control type: manual Location: United States Shipping time: immediately / on request Technical details Swing over carriage mm: 630 mm Turning length mm: 4,000 mm Swing over cross slide mm: 350 mm Spindle passage mm: 70 mm Bkxkf7x Control: Manual 2-axis digital display TURN VISION Main drive engine kW: approximately 17 kW Machine weight kg: 6,500 kg Accessories: Multifix steel holder 3 - jaw Chuck 4 - jaw Chu... more
5

Cylindrical Grinding Machine TOS BUA 25x630

Stockstadt, GermanyGermany dealership location
6564 km
used
grinding diameter:250 mm grinding length:630 mm centre height:125 mm control:Siemens S7 feed stepless: swing diameter:280 mm centre distance:630 mm grinding head swivelling:90 ° table swivelabel +/-:+10/-7 ° grinding wheel dia. x width x bore:400 x 40 x 127 mm grinding wheel dia. according abrasion:250 mm max. grinding wheel width:63 mm swing in open rest:70 mm swing in closed rest:70 mm taper bore of workpiece spindle:4 Morse taper of tailstock quill:4 Morse Baggvpgbnz stroke tailstock cente... more

4 FT LATHE LINE COE 263

North Carolina, United StatesUnited States dealership location
518 km
used
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Bb7lbmjhob COE 4 Ft. Veneer Peeling Line with the following major components and features: -- Log cut-off saw. -- Geometric lathe charger. -- Dual spindle 4' COE Model 263 Lathe: &#9679 Diameter of outer spindle 7" &#9679 Diameter of inner spindle 4" &#9679 Max. swing 48" &#9679 Knife length 56" &#9679 Lloyd controls including motor starters &#9679 Main drive DC-AC 165 HP/200 HP -- Veneer conveyor to clipper. -- Pneumatic [...] AVAILABLE: VENTEK Veneer... more
2
spindle diameter 125 mm x-travel 1600 mm y-travel 1400 mm z-travel 1600 mm table-size 1800 x 1600 mm spindle taper MT 6 drilling depth in one stroke 1000 mm quill stroke 1000 mm Up2qyq9oo turning speed range - spindle 8 - 1250 U/min turning speed range - facing chuck 5 - 315 U/min feeds longditudinal/cross/vertical 1 - 800 mm/min table rotating 360 ° indexing 0,5 ° distance table - spindle center 50 - 1350 mm radial face slide feeds: 1 - 800 mm/min facing chuck dia. 800 mm spindle motor 17 kW ... more
6

Gear Shaping Machine LORENZ LS630 CNC

Monheim, GermanyGermany dealership location
6403 km
2011
used
max. wheel diameter 630 mm gear width 200 mm max. module 12 Oscillation lenght 220 mm pitch circle internal (min/max) 250+dks / 750-2x max. distance table - work spindle 450 mm min. distance table - work spindle 15 mm no. of strokes 15-90 Hub/min no. of strokes 35-210 Hub/min no. of strokes 85-510 Hub/min feeds 2,5 - 250 mm/min roll feed 0,05 - 16,7 mm/min radial feeds 0,15-15 mm/min radial rapid traverse 2000 mm/min main drive 15 kW total power requirement 37 kW weight of the machine ca. 10 t... more
3
Metal band saw blades, bandsaw blades -ungebraucht OVP Czfletgw -5 x blades available Award pieces Teeth 2/3 TPI Dimensions 6300 x 41 x 1,3 mm more
5
1 used heavy lathe manufacturer: HEYLIGENSTAEDT type: 63 en BJ. 1961 Bzylskgyc Turning diameter max: 1250 mm Turning length: 10000 mm Machine is in very good condition with 2 heads and drilling tailstock Steady rests Total weight. 30000kg more
6
Mitsubishi / Mazak FX 763B BN624E526H01 cards used, normal wear, 100% functional, included with com. photos Bcr8t9sslh more
1

MANUAL LATHE TARNOW TUJ 630M

North Carolina, United StatesUnited States dealership location
518 km
2004
used
Elect./Voltage: Bbu0i3eb0z TARNOW TUJ 630M Removable Gap Bed Engine LatheSpecifications: -- Swing Over Bed 25" -- Swing In Gap 35" -- Swing Over Carriage 17" -- Length Of Gap 11-1/4" -- Distance Between Centers 60" -- Hole Thru Spindle 3.543 -- Spindle Speeds (18) 20 - 1600 RPM -- Tailstock Spindle Center Taper #5 Morse -- Tailstock Spindle Travel 6-1/2" -- Tailstock Spindle Diameter 3-1/4" -- Width Of Bed 14.57"Feeds: -- Longitudinal .0007 - .720 IPR -- Cross .00035 - .360 IPRTh... more
6

Milling Machine - Vertical HERMLE U630T

More Hermle U 630
Wilbertoord, NetherlandsNetherlands dealership location
6307 km
2000
used
x-travel 630 (875) mm y-travel 500 mm Bbv2k2sgbx z-travel 500 mm control Heidenhain TNC 410 weight of the machine ca. 4.8 t more
5
Robot Romat 310, control ROTROL 32 TM incl. connection cable, handheld programming device. Gas nozzle sensor, arc seam searching, C stand Torch welding machine MC 3 353, wire feeder, torch MRW 380 Mech. Cleaning, Photoelectric switch dreistrahlig, delayed start,. Dwagv3 1 table with 2 Drehkipptischen, recording weight 500 kg, faceplate axis controlled by the computer, unplugged tilting axis in 7 positions. ARC protection on the indexing table Price incl. dismantling and loading more
5
Bending tool, die, Oberrmesser, upper tool, upper cheek, Ev9lksp Tool for bending machines Dimensions 90 x 25 mm Length 1630 mm Weight 20 kg more
6

Milling Machine Reform FGS 50/63

Kaiserslautern, GermanyGermany
6535 km
1996
excellent (used)
OVERVIEW: Brand: Reform Model: FGS 50/63 Gcxdwx7 Application type: Milling Machine type: Milling Machine Availability: Immediately Construction year: 1996 Location: Germany Origin country: Germany GENERAL DATA: Measurements width: 3350 mm Measurements depth: 3060 mm Measurements height: 2500 mm Machine weight: 6500 kg MAIN DRIVE: Number of spindle: 1 Spindle speed range: 35-1800 1/min CONTROL UNIT: Brand: Heidenhain WORKPIECE: Milling spindle drm: 125 mm Spindle hu... more
9

Lathe TOS SUI 63

Nordrhein-Westfalen, DeutschlandGermany
6437 km
1990
ready for operation (used)
Engine type: conventional lathe Make: TOS Type: SUI 63-80 / / 4000 year: ca. 1990 Control type: manual Location: United States Shipping time: immediately / on request Cargo base: From site / Foundation Price / euro / net: on request Technical details Swing over carriage mm: 630 mm Turning length mm: 4,000 mm Swing over cross slide mm: 350 mm Spindle passage mm: 70 mm Control: Manual 2-axis digital display TURN VISION Main drive engine kW: approximately 17 kW Machine weight kg: 6,5... more
1
Elect./Voltage: Bbu0iss3gy TOS SUS 63 Heavy Duty LatheSpecifications: -- Maximum Swing Over Bedways 25" -- Maximum Swing Over Cross Slide 15.3" -- Distance Between Centers 320" -- Spindle Hole Diameter 3.2" -- Spindle Speeds: (22) 9-1120 RPM -- Spindle Nose (Camlock) D1-11 -- Cross Slide Traverse 16.5" -- Tool Rest Traverse 8" -- Dimensions of 4-Way Tool Post 8.5" x 8.5" -- Number Positions 4-Way TP Adjustable 24 -- Tailstock Quill Diameter 5.1" -- Tailstock Quill Travel 13" -- T... more
7
UL63 CONTROL UNIT from dismantling a Traub TND 360 Manufacturer: MITSUBISHI Type: MELDAS - TL integrated components: -Power unit UX2 Card LX61 Card LX64 Card LX631 Condition: used / ready to use This offer is aimed exclusively at commercial people. Prices are net. Hiajcmpfy We will gladly create an individual offer for you. To do this, please send us your complete contact information. Offer staying free, intermediate sale is reserved. Internal No.: 1131 more
3

Hydr. pressbrake MEGOBAL PB 2063

Dreieich, GermanyGermany dealership location
6568 km
1992
used
pressure 63 t chamfer lenght 2000 mm distance between columns 1600 mm throat 500 mm max. stroke 100 mm table width 2000 mm voltage 400 V total power requirement 6,0 kW weight of the machine ca. 4,0 t dimensions of the machine ca. 2,45 x 1,60 x 2,00 m - Fabr. - No.: 0621711 - two hand operation Balyfp907m - foot switch - without Tools more
5
Portable power distribution centre, construction electricity meter, connecting Cabinet, crane distribution, distribution Cabinet, power distribution, crane connection Cabinet assembling -FI protection switch -3 x SCHUKO plug -5 x CE socket Cfc7s0bou Counters place Dimensions 850/600/H1230 mm Weight 100 kg more
6
Type: AH50 used machine Twuxdocd working width: 510 mm Surface planer table: 2600 mm 4-blade-shaft table lips slit Motor Power 5,5kW Year of construction: 1985 Location: Warehouse / 82281 Herrnzell more
2

Radial Drilling Machine KOLB HKH

Mönchengladbach, GermanyGermany dealership location
6371 km
1970
used
bore capacity in steel (diameter):60 mm arm length:2000 mm workpiece height max.:1600 mm spindle turning speed range:28 - 950 U/min feeds:0,07 - 2,9 mm/U spindle taper MT:5 Gcm7pv0x8 total power requirement:13 kW weight of the machine ca.:6 t dimensions of the machine ca.:3,2 x 1,6 x 3,4 m - boring cube 800 x 600 x 600 mm - central clamping more
1

VENEER MFG. PLANT COE 263

North Carolina, United StatesUnited States dealership location
518 km
used
Elect./Voltage: 575 V, 60 Cy, 3 Ph. Ncdkf HOT SALE ! Green Line Veneer Plant with the following components: • 40 Ft., 2-strand Hl30 chain infeed deck with drive.• Hourglass rollcase reject transfer with drive.• 1-Ton KITO chain hoist with pin bar reject log grapple.• 40 Ft., 2-Strand H78 chain infeed section to lathe.• 1993 COE pin placer with 1981 DURAND Model M785 automatic lathe charger with (5) COE Model 203 (1993) displacement laser scanners.• Chevron Belt core transfer with k... more
6

Lathe - cycle-controlled BOEHRINGER DUS 630 ti

Monheim, GermanyGermany dealership location
6403 km
2007
used
turning diameter 630 mm turning length 2.000 mm Hmoedtz control Heidenhain MANUALplus 411 greates pass round over bed 640 mm Main drive AC, 23 kW turning speed range 6 - 2.500 U/min boring ram 80 mm weight of the machine ca. 6 t Equipment: - 4-speed quick-change turret Parat size 4 - tailstock - coolant connection for Capto tool system - fixed roller mesh with three sleeves diameter 20 - 220 mm - Hand-operated three-jaw chuck type Rota-S 400 J8 SCHUNK - chip conveyor - coolant - document... more
4

wire stitching heads Mueller Martini HK 75

Minden, GermanyGermany dealership location
6479 km
good (used)
Lo9hf2mxx Checked 4 pieces more
3
Bending tool, die, upper blade, upper tool, walk tool Tool for bending machine -geteilt Tool RADIUS mm dimensions 60 x 140 mm Length 1634 mm (1 x 835 / 1 x 799) Matpx Weight 40 kg more
5
DATA ON THE MACHINE Type of machine: CNC universal tool milling machine Manufacturer: Hermle Model: U 630S Year of construction: 2000 Universal tool milling machine Hermle U 630 S Control HEIDENHAIN TNC 410 X axis 630mm Y-axis 500mm Z-axis 500mm Table 900 x 530 mm max. 800 kg Spindle retainer for SK 40 Spindle speed Max 7000 RPM Machine weight approx. 4,300 kg Hioceyvua Accessories: -Handwheel -3D measuring probe Machine has power and can be visited more
4

Machining Center - Universal KRAFT GT 630 5x

Stockstadt, GermanyGermany dealership location
6564 km
2017
as good as new (ex-display)
x-travel:760 mm y-travel:820 mm z-travel:560 mm Bah2dlb2vx rotary table tiltable:A-Achse +30 ~ -120°, C-Achse: 360°, Min. Index-Inkrement 0.001° table-size:630 mm distance floor area / table surface:900 mm table load:600 kg Workpiece dimensions:max.Ø800x500 mm spindle speeds:20000 1/min. spindle drive:40 kw spindle taper:40 BBT milling feed range:1-10000 mm/min rapid traverse in x-y-z axis:48 m/min rapid traverse speed:Tisch (A-/C-Achse): 83/125 mm/min Tool changer:30 fach max. tool length:125... more


koelle hk 63
daily

New machines via email!

Stay updated!

to

to

Edit search
KOELLE HK 63
SELL IMMEDIATELY
with Europe's market leader for as little as € 0,49 per ad.
Find out more


Phone: +1 312 94 04 581
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close