Used Kotz Und Soehne for sale (5,227)

Condition: excellent (used), functionality: fully functional, Swivel spindle milling machine KÖLLE F 45 in very good condition; this machine comes from an assembly company and has been idle for the last few years, as it was no longer needed. Everything functions perfectly. All bearings and guides are in good condition; the machine runs very smoothly. Year of manufacture: 1990 with control panel on top Both fence jaws on the milling fence can be adjusted in depth, with fine adjustment and scale, allowing for planing work, e.g., on a gluing profile. The entire milling fence can also be adjusted in depth using a handwheel and a leadscrew, enabling very precise and fast adjustments. with AIGNER integral fence with spindle locking lever Chips can be removed very effectively with 2 extraction ports, 125 mm on the milling fence and 100 mm on the machine table. with 30 mm spindle, which can be swiveled steplessly from -5 to 45°; the spindle is swiveled electrically with a very precise display; fine adjustment can be made manually with a handwheel. The height adjustment is also electric, and a handwheel is also available for fine adjustment. with right/left rotation We will personally deliver and demonstrate the machine anywhere in Germany for €220.00, so you have no risk when purchasing; shipping to Austria and the rest of the EU is also possible upon request. with a large table opening of 375 mm, which can be reduced by using various rings (this allows for the use of cutters with a very large diameter, and you can also safely mill with small cutters). with 3000, 4000, 5000, 6000, 8000 and 10000 rpm Djdpfxszt Ai Es Ak Ajcp the table is made of heavily ribbed cast iron with 30 mm spindle in the machine; another spindle can also be installed very robust and durable design; the machine was built for heavy-duty milling operations and is suitable for all milling applications. optimal power transmission through belt drive with instruction manual with 3-roller feed system HOL HER, type ET 117 the feed system has right/left rotation and 8 speeds; the feed rollers are individually mounted and are all in new condition. the machine table is 1000 mm deep and 1200 mm wide; it has an extendable support table 1200 mm long. the machine is ready for immediate use. 380 V, 4700 and 5700 W due to the 2 speeds with all necessary safety devices, motor brake, and emergency stop switch; the machine is approved by the German Wood Trade Association (Holz-BG) and has the GS safety mark. the machine weighs approximately 1000 kg with motor protection switch against overload professional-grade machine, not a hardware store reject optimal, simple, fast, and safe operation

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Turning data Turning length: approx. 700 mm Djdo Ad E Sujpfx Ak Ascp Center height above bed: 160 mm Turning diameter above bed: 320 mm Center height above carriage: 100 mm Turning diameter above carriage: 200 mm Spindle bore: approx. 36 mm MACHINE DETAILS Manufacturer: Hahn und Kolb Machine type: Lead screw and feed screw lathe Length: 1,800 mm Width: 500 mm Height: 1,500 mm Weight: 1,000 kg

Year of construction: 2020, operating hours: 1,000 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 19/00XXX, Probat G45 Retro / Kirsch & Mausser Professional Coffee Roasting System – Complete System (As New, 1,000 Hours) Price: EUR 100,000 net plus VAT Condition & History: • Operating hours: approx. 1,000 hours (as new, well-maintained, in excellent condition). • Design: G45 Retro system, newly built by Kirsch & Mausser in 2019/2020, featuring a cast-iron design and complete modern peripherals. • Availability: Ready for immediate pickup. Equipment (6 items included): Item 1: Probat G45 Retro Roasting Machine • Batch size: 25 - 55 kg • Gas type: Natural gas or propane (230/400 V, 50 Hz) • Separate drives for roasting drum, agitator in the cooler, and cooling fan (simultaneous roasting and cooling possible). • Enclosed housing with large maintenance openings, manual handwheel for airflow regulation (drum interior/jacket, aroma, external). • Cooling sieve with a second outlet, roasting fans directly on the machine, large cyclone with chaff collection container, and connection for manual fire extinguishing water supply. • Atmospheric burner with increased output (145 kW), continuously adjustable via potentiometer on the control panel, including all safety and monitoring devices (solenoid valves, flame and gas pressure monitoring, pressure regulator). • Complete thermocouple equipment (production, roasting air, roasting exhaust air, hot air supply in the rear wall) with separate connections for temperature recording systems (e.g., Cropster). • Manual control on the control panel with digital display for temperatures and roasting times, as well as a frequency inverter for the roasting fan. Item 2: Frequency Inverter for Drum Operation • Continuous adjustment of the roasting drum speed (manually or via recipe). • Individual speed monitors and live display on the touch panel. Item 3: Semi-Automatic Control with Touch Panel • Freely positionable control panel with touch panel. • Readability and automatic regulation of intake air temperature and roasting fan output via recipes. • Parameter changes during the roasting process can be made at any time. Dcsdoz Eah Hopfx Ak Aep • Additional potentiometers for independent control of the burner, roasting fan, and cooling fan. • Pneumatic actuation of the green coffee feed and the outlet valve in the drum lid. Item 4: Green Coffee Transport • Hopper for up to 60 kg of green coffee. • Conveyor fan, conveyor pipe with bends and clamps, and enclosed machine hopper. Item 5: High-Suction Destoner • Hopper at the cooling sieve outlet, riser pipe with sight glass. • Collection container with impact plate to prevent coffee breakage, connection to the cooling fan. • Air intake flap for regulating the rising speed, slide valve at the outlet. • Frequency inverter for the destoner fan with potentiometer on the frame. Item 6: Drum Vacuum Measurement • Pressure sensor in the pipe between the roaster and the system with direct display on the touch panel. Terms & Conditions: • Location: Luxembourg. • Communication: Please submit inquiries exclusively in writing via the platform/email. No telephone contact. • Legal: Commercial B2B sale excluding any warranty, liability for defects, and right of withdrawal. The system is sold in its current "as is" condition. Dismantling and transport are the responsibility of the buyer.

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: 3795, Equipment: clamp, Theisen & Bonitz TB Flex 304 QSM for brochure production, equipped with a stapling unit and three-side trimming. Further technical specifications will be added. Dcodpfx Akj Adtc Us Aep

Year of construction: 2022, condition: like new (used), functionality: fully functional, machine/vehicle number: WDW-70056, WDW – Calibrated containers – Continuous weighing scale for weighing wood pellets or other pellet-shaped bulk goods, complete with a discharge unit. Performance / throughput: 15.6 tons/hour; weighing accuracy: +/- 0.01 kg; cycle times: approximately 2 weighings per minute; the photo shows a representative image; the machine is delivered in its original packaging. Djdpfsz Ixc Iex Ak Ajcp

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: 3987, Theisen & Bonitz 315 VP assembly machine, fully functional and from current production. Further technical specifications will follow. Dcodpfx Ako Abtdms Aep

Condition: used, Year of construction: 2016, operating hours: 15,000 h, functionality: fully functional, machine/vehicle number: kom 4892, Set of dryer equipment, including: Loading bunker Dedpexa Drhefx Ak Aecp Oversize vibrating screen Chain conveyor to dryer Belt dryer Chain conveyors from dryer Vibration separator

Year of construction: 2020, condition: used, Offered for sale is a manual powder coating booth with a cartridge filter system. Technical data: Usable volume: 9.5m³, airflow rate: 12000m³/h, downward air velocity: 0.25-0.3m/s, total filter area: 160m², maximum powder melting point: 220°C, maximum dimensions X/Y/Z: 2200mm/200mm/2000mm. Control system: Integrated spray gun and control unit for manual powder coating. Equipment: Booth, platform, filter system, eight cartridges. Operation: 2020/2021 two-shift operation, subsequently approx. 30% daily utilization. System documentation available. Inspection possible by arrangement. Dedpfxoz Rn Dne Ak Aocp

Year of construction: 2016, condition: used, Four identical retarder prover chambers for bakery applications are offered. Equipped with a shared control cabinet. Inspection possible by arrangement. Dsdpfx Akjz Irlvj Ajcp

Condition: used, Year of construction: 2020, Offered for sale is an electric tempering oven with a maximum operating temperature of 250°C. Approx. dimensions X/Y/Z: 3000mm/2200mm/2500mm. Operation: 2020/2021 in two-shift operation. Inspection possible by arrangement. Dcedpfjz Rn Duex Ak Ajp

Condition: used, Year of construction: 2021, functionality: fully functional, machine/vehicle number: 00073068, roll pitch: 62 mm, total width: 692 mm, total height: 800 mm, total length: 25,000 mm, conveying length: 25,000 mm, working width: 600 mm, frame height: 800 mm, track width: 600 mm, For sale is a professional, motor-driven roller conveyor manufactured by AMI Förder- und Lagertechnik, built in 2021. Technical specifications: • Overall length: 25,000 mm • Conveyor height: 800 mm • Conveyor width: 600 mm Dodsz Rv S Hjpfx Ak Ajcp • Color: RAL 5010 Blue • Without side guides • Includes discharge section of 3,000 mm • With roller stop • Two-sided emergency stop pull cords Photoelectric sensor control: • 1 photoelectric sensor at the end of the powered section (after 22,000 mm / beginning of discharge section) → stops the conveyor system when occupied • 1 photoelectric sensor at the end of the discharge section (mounted under the discharge section, facing upwards, fan-shaped beam) → starts the conveyor system when released (adjustable response time) Process: Boxes are placed along the entire powered section and transported to the pick-up position. The control system prevents the discharge section from becoming overcrowded and automatically restarts when a box is removed. Electrical equipment (complete scope of supply): • 1 motor drive controller • 1 control cabinet with main operating elements on the door • 1 Siemens PLC controller • 2 photoelectric sensors • 2 emergency stop pull cords Sales information: • Delivery and collection possible by arrangement The system was built in 2021 and features a complete, professional control system (Siemens PLC + photoelectric sensor control). Ideal for the transport of boxes/containers in logistics, production, or shipping.

Condition: used, Year of construction: 2022, Offered for sale is an electric tempering oven with a maximum operating temperature of 100°C. Approx. dimensions X/Y/Z: 1800mm/1800mm/1600mm. Operation: 2020/2021 in two-shift operation. Inspection possible by arrangement. Djdpfx Akoz Rn Dzs Aecp

Year of construction: 1992, condition: used, functionality: fully functional, machine/vehicle number: 029.700, Painting/drying booth from Luft- und Trockentechnik GmbH, type KSP 6-BT, manufactured in 1992. The system is suitable for painting and drying workpieces and features an integrated exhaust/extraction system. Technical data: Manufacturer: Luft- und Trockentechnik GmbH Type: KSP 6-BT Year of manufacture: 1992 Manufacturer's number: 029.700 Usable volume: approx. 72 m³ Total volume: approx. 81 m³ Minimum exhaust air volume flow: 1,440 m³/h Maximum permissible oven temperature: 90 °C Maximum solvent quantity: 4,302 g/oven load The painting booth has dimensions of 6 x 4 meters. The system includes an exhaust duct with extraction via the roof. Dcodpfsz D Evyox Ak Aop In addition, a suspension/transport system is located in the ceiling area, to which workpieces or painting racks can be attached and moved through the work area. Dismantling will be carried out by the buyer.

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: K 300712/595, overall weight: 2,900 kg, total width: 125 mm, total length: 330 mm, total height: 225 mm, Dcsdpfx Aez Dcaiek Aop

Condition: good (used), functionality: fully functional, Robust hydraulic press, type HES 16MP, manufactured by Hydraulische Pressen und Maschinenbau GmbH (HYPREMA). Depending on the tooling and permissible load, the machine is suitable for typical pressing and straightening operations, such as aligning, pressing in, and pressing out components. Dcedpfsumk Naox Ak Asp The model designation HES 16MP indicates a nominal pressing force of approximately 16 tons. The installed pressure gauge has a display range up to 25 MPa (25 tons). Model: 7092513 Type: HES16MP General: - Pressure gauge display, pressing force: 0–25 MPa (0–25 tons) - Pressure gauge display, hydraulic pressure: 0–400 kp/cm² (approx. 0–392 bar) - Design: Hydraulic single-column press - Operation: Hand lever actuation

Condition: used, Year of construction: 1980, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,100 mm, spindle speed (max.): 1,200 rpm, spindle speed (min.): 15 rpm, spindle mount: MK 5, throat depth: 2,000 mm, quill diameter: 76 mm, quill stroke: 600 mm, type of input current: three-phase, total length: 4,040 mm, total height: 2,900 mm, table width: 900 mm, input voltage: 380 V, total width: 2,800 mm, table length: 1,200 mm, drilling depth: 600 mm, rotational speed (max.): 1,200 rpm, rotational speed (min.): 15 rpm, spindle diameter: 80 mm, feed length W-axis: 600 mm, rapid traverse X-axis: 3,450 m/min, rapid traverse Y-axis: 3,450 m/min, rapid traverse Z-axis: 3,450 m/min, Equipment: documentation/manual, SORALUCE ALF 80 A Universal Drilling and Milling Machine Year of manufacture: 1980 · Heidenhain ND70 · Extensive original documentation For sale is a robust and versatile SORALUCE ALF 80 A universal drilling and milling machine, manufactured in 1980. The machine is suitable for demanding drilling, reaming, and milling operations, as well as for machining larger and heavier workpieces. Due to its solid construction, the ALF 80 is particularly suitable for classic machine, plant, steel, and special machine construction. The machine features a Heidenhain ND70 position indicator. Extensive original operating instructions and technical documentation from SORALUCE are available. Equipment / Accessories In addition to the machine, the offer includes an extensive accessory package, so that the SORALUCE ALF 80 A can be used for various machining tasks. Among other things, the following are included: Large, solid clamping angle for vertical or angular clamping and machining of workpieces Extensive selection of tool holders and tool attachments Various clamping devices Additional existing tools and machine accessories Heidenhain ND70 position indicator Original SORALUCE operating instructions Technical documentation Foundation and installation documents The large clamping angle can be seen in the machine photos. Thanks to the extensive accessories, the machine offers a significant practical added value compared to a machine without the corresponding tool attachments and clamping devices. The exact scope of the accessories can be viewed during an inspection. On request, further detailed photos of the accessories can be provided. Technical data Manufacturer: SORALUCE Model: ALF 80 A Machine type: Universal drilling and milling machine Year of manufacture: 1980 Machine no.: 55/5-110 Travel distances / Working area Cross travel: 1,600 mm Longitudinal travel of table: 1,100 mm Longitudinal travel of table without steady rest: 1,400 mm Vertical travel: 1,200 mm Longitudinal travel of drilling spindle: 600 mm Largest distance between spindle and steady rest: 2,000 mm Dcedpfxszl Rqho Ak Ajp Work table Useful area: 900 × 1,200 mm Spindle Drilling spindle diameter: 76.2 mm Spindle diameter for milling: 128.57 mm Tool holder: Morse taper MK 5 Number of speed stages: 24 Speed range: 15–1,200 rpm Feeds Drilling spindle / Faceplate: 9 feed stages 0.036–2 mm/rev Spindle box / Slide: 9 feed stages 0.072–4 mm/rev Rapid traverse: Drilling spindle / Faceplate: 600–1,725 mm/min Spindle box / Slide: 1,200–3,450 mm/min Faceplate Design: detachable Diameter: 430 mm Largest face turning diameter: 750 mm Adjustment of face turning slide: 150 mm Motorization Main brake motor: 10 hp Coolant motor: 0.25 hp Dimensions and weight Overall length: 4,040 mm Overall width: 2,800 mm Overall height: 2,900 mm Net weight: approx. 9,200 kg Equipment / Accessories Heidenhain ND70 position indicator Original SORALUCE operating instructions Technical documentation Foundation and installation documents Available accessories and tools for the drilling machine, by arrangement Due to its solid, heavy construction, the machine is of particular interest to companies that are looking for a reliable conventional drilling and milling machine for large workpieces. Inspection possible by appointment. We will gladly provide further photos, technical documents and detailed information.

Condition: good (used), Drawbar, drawbar, overrun brake Dcodpfx Akjgnnbks Ajp -Drawbar: height-adjustable, cranked, with overrun brake -Support load: 75 kg -permissible total weight: 900 kg -Number: 14x drawbar available -Price: per piece -Total length 2500 mm -Transport dimensions: 1200/800/H450 mm -Own weight: 50 kg -Transport weight 76 kg

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: K 220808/309b, overall weight: 2,850 kg, total width: 125 mm, total length: 330 mm, total height: 125 mm, Dcedpfx Ajz Db Tuok Aop

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Manufacturer: Speidel Tank and Vessel Construction Year of manufacture: 2020 Technical specifications: Net capacity: approx. 1,250 liters Material: Stainless steel 1.4404 / AISI 316L Design: insulated (with thermal jacket/insulation jacket) Internal surface: suitable for food/pharmaceutical use Operating pressure: atmospheric (storage tank) Temperature range: suitable for temperature-controlled media Connections: hygienic clamp fittings Manway: available Bottom: conical (complete drainage) Legs: height adjustable Djdoy I Skwjpfx Ak Ascp Application: The tank is ideally suited for the storage of pharmaceutical, cosmetic, or food-grade liquids. The tank was used as a CIP vessel in a pharmaceutical facility and was operated under hygienic conditions accordingly. Typical applications include: - Intermediate storage of bulk goods - CIP feed tank - Storage of alcohol, cleaning, or disinfectant solutions - Process integration in filling lines Construction: - Premium stainless steel construction (316L) - Insulated tank for temperature-controlled processes - Hygienic design with clamp fittings - Conical bottom for complete residue drainage - Industrial-grade build from German manufacturer Speidel Condition: - Very good condition - Used, well maintained - Immediately available FAT / Documentation: - Operation manual available - Manufacturer documentation included Scope of delivery / Documentation: - Complete stainless steel tank - Insulation jacket - Documentation / operation manual - Nameplate present Special features: - German brand quality (Speidel) - Suitable for pharmaceutical, cosmetic, and food applications - Ideal as a CIP feed or buffer tank - Compact design with high quality

Condition: used, Year of construction: 2008, functionality: fully functional, Technical specifications: Dodpfjzdc D Sex Ak Aocp Washing booth: Manufacturer: Hege Year of construction: 2017 Washing equipment: Steam cleaner, electrically heated Ventilation: Supply and exhaust air Heating: Gas burner Dimensions: (l x w x h) 8000 x 5000 x 3000 mm Preparation room Manufacturer: Walther Pilot Year of construction: 2008 Ventilation: Supply and exhaust air Heating: Gas burner Dimensions: (l x w x h) 5140 x 4120 x 3000 mm Painting booth Manufacturer: Walther Pilot Year of construction: 2008 Ventilation: Supply and exhaust air / Recirculation mode possible Heating: Gas burner Dimensions: (l x w x h) 6250 x 4120 x 3000 mm Drying 1 Manufacturer: Walther Pilot Year of construction: 2008 Ventilation: Recirculation mode Heating: Gas burner Dimensions: (l x w x h) 6250 x 4120 x 3000 mm Drying 2 Manufacturer: Hege Year of construction: 2017 Ventilation: Recirculation mode Heating: Pumped hot water Dimensions: (l x w x h) 5840 x 4120 x 3000 mm Lift and lower station Manufacturer: Hege Year of construction: 2017 Lifting capacity: 980 kg Manual push conveyor: Year of construction: 2008 / Extension 2017 Load capacity: 400 kg/m Operating mode: manual

Condition: used, Year of construction: 2014, power: 28 kW (38.07 HP), number of chambers: 5, Capacity: The oven has six independently controlled baking compartments (baking trays or levels). This allows different products to be baked simultaneously with different temperatures and baking times. Operation: Each of the six compartments is equipped with its own, individually programmable digital control panel on the left side (as shown in image_0.png). Each panel has a display and buttons for setting time, temperature, and possibly other parameters. Construction: The oven is robustly constructed with a black metal housing and an illuminated hood bearing the inscription "WACHTEL INFRA." On the right side of each level, there is a lever for operating the door or steam inlet of that specific compartment. Interior: Each compartment has a flat baking surface, possibly lined with stone or a metal baking sheet, as shown in image_2.png. Dodpfxezbr U Ie Ak Aocp

Year of construction: 2014, condition: good (used), Load capacity: 2000 kg Width: 3850 mm Height: 400 mm Dsdjy Uurwjpfx Ak Aecp Depth: 130 mm Weight: 5,9 kg Condition: good, second-hand

Condition: reconditioned (used), Year of construction: 1980, functionality: fully functional, For sale: a drilling and milling machine from Alzmetall. Dsdpjzk U Dpefx Ak Aocp Type: Plus 3 DG. Inspection and test run possible at any time. Forklift available for loading.

Condition: refurbished (used), functionality: fully functional, Year of construction: 2004, punching force: 50 t, punching diameter: 100 mm, stroke length: 60 mm, product height (max.): 15 mm, Mubea / Muhr and Bender KLH 500 / 610: - hydraulic hole punch - Punching force 50 to - stroke 60 mm - punches up to Ø 30 mm in 15 mm, Ø 50 mm in 9 mm, Ø 100 in 4.5 mm - throat depth 610 mm - with support table Special tools and devices on request. Dsdpevdiduofx Ak Aocp Trade-in of used machines. Europe-wide delivery possible.

Condition: used, Approximately 225 used gauge pins from various manufacturers, applicable for measuring/testing bores to determine maximum and minimum dimensions, with a good side and a reject side. 1-piece. Includes, among others, thread gauge pins made of tool steel, DIN 7162, H7, H6, H5 for measuring length, diameter, and bore. Manufacturers: Saliger, Hommel, HK, Blome, and FerTer. Price upon request. All technical specifications are subject to typographical errors and inaccuracies. Dodpfx Akjzz I Txo Aecp Sales exclusively to countries within the EU.