Used Boschert K 30-120 Mini S for sale (58)

Condition: used, Year of construction: 1987, plate thickness 4 mm blade length 150 mm cutting angle 30-120 ° Gksdpfxjyv Ntxe Af Aja Table dimensions 1000x650 mm

Condition: used, Year of construction: 1996, 4.0 mm 3.0 mm 30 - 120 Grad blade length 150 x 150 mm work height max. 900 mm table: 1000 x 650 mm engine output 3.0 kW weight 850 kg range L-W-H 1250 x 1000 x 1160 mm Furnishing: Godpexabpdjfx Af Ajka - Notching machine with angle adjustment 30° - 120° - Simple and functional "Touch Pad" control panel * Set-up stroke * Single stroke * continuous stroke - Plexiglas protection for better transparency - hardened knives also for cutting stainless steel - planed table surface * to avoid 'tilting' or 'slipping' of the metal sheet - adjustable lift height adjustment - Waste bin - free-moving footswitch - Operation manual BOSCHERT angle adjustment: - the one-piece 30° upper knife is within one tool both with a left and directly connected to a right lower knife - once for each notch over 30° left and once on the right. - the swivel adjustment becomes pneumatic, immediately after completion of the first notch, lightning fast carried out.

Condition: used, Year of construction: 1989, plate thickness 4 mm cutting angle adjustment 30-120 ° table height 900 mm 407 Gedpeyv N Hlofx Af Aeka weight of the machine ca. 760 kg dimensions of the machine ca. 1300x1000x1150 mm

Condition: used, Year of construction: 1987, plate thickness 3 mm angle adjustable from - to 30 - 120 Grad table height 900 mm weight ca. 800 kg Cutting capacity: 3 mm St40 at 150 x 150 mm, 2 mm stainless steel; cutting angle continuously adjustable from 30° to 120°; pneumatic clamping for angle adjustment (Boschert system); machine is in good condition Gkodpfjy Ihanjx Af Asa

Condition: used, Year of construction: 1989, plate thickness 3 (VA), 4 (ST 40) mm cutting angle adjustment 30 - 120 ° cutting length 200 mm throat 300 mm table height 900 mm work stroke max. 40 mm no. of strokes max. 40 Hub/min total power requirement 4 kW Gedpfx Afjyv Nz Aj Ajka weight of the machine ca. 2.000 kg dimensions of the machine ca. 1500x1300x1400 mm

Year of construction: 2021, condition: ready for operation (used), A Boschert notching machine with an integrated punching station is available. Cutting angle range: 30°-120°, punching capacity: 15t, punching diameter range: 9.19mm-91.87mm, cutting length range: 53.85mm-53.46mm, max. sheet thickness: 10mm, punching force: 15t, stroke rate: 40/min, table dimensions X/Y: 1000mm/650mm, machine dimensions X/Y/Z: approx. 1250mm/1000mm/1200mm, weight: approx. 2000kg. Documentation vorhanden. An on-site inspection is possible. Gksdpjyugl Isfx Af Asa

Year of construction: 1996, condition: good (used), machine/vehicle number: 598, Offer 22391 Technical data: - Cutting length up to 200 mm - Cutting thickness: - Steel with 400 N/mm² tensile strength: 6 mm - Stainless steel with 600 N/mm² tensile strength: 4 mm - Stepless cutting angle adjustment: 30 - 120° - Pneumatically clamped - Automatic cutting gap adjustment - Locking stops on the left and right, each 300 mm - Table surface area: 1000 x 800 mm - With T-slots and depth stops - Table height: approx. 900 mm - Depth stops - Drive: 400 V / 4 kW - E – foot pedal Gedpfx Ajiqgd Ejf Aoka - Space requirement: approx. W 1000 x H 1350 x D 1510 mm - Weight: approx. 1800 kg

Condition: good (used), functionality: fully functional, Year of construction: 1991, sheet thickness steel (max.): 6 mm, power: 0.004 kW (0.01 HP), overall weight: 1,600 kg, Cutting 6 mm at 400 N/mm² 4 mm at 600 N/mm² Stepless angle adjustment 30 - 120° Gksdpfxozp Dr Tj Af Asa Drive power approx. 4 kW

Year of construction: 1994, condition: excellent (used), Hydraulic notching machine Manufacturer: BOSCHERT, Type: K30-120 Very good condition, year of manufacture: 1994 Gjdohygztspfx Af Aeka Technical data Manufacturer: BOSCHERT Type: K30-120 Year of manufacture: 1994 Cutting capacity: 6 mm in St 40 / 4 mm in stainless steel Blade length: 200 mm Cutting angle: 30-120° Working stroke: 40 mm Table height: 900 mm Connection power: 6 kVA Weight: approx. 1600 kg Dimensions: approx. 1500 x 1200 x 1300 mm All information is without guarantee. The machine is in very good condition. A demonstration under power is possible at any time in our showroom.

Condition: used, Year of construction: 1989, Year 1989 angle stop 30 -120 Grad good condition . Anschlag weight 600 kg +++++ Please note: Gsdpfxsliuihj Af Aeka The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Max. sheet thickness: 4 mm steel, 3 mm stainless steel Adjustable angle: 30° - 120° Pneumatic angle adjustment Gksdpfx Aszl Du Hef Asa Stroke activation via foot switch Single stroke or double stroke adjustable via selector switch Weight: approx. 1000 kg

Condition: used, functionality: fully functional, Year of construction: 1993, machine/vehicle number: 398, control type: manual, degree of automation: manual, actuation type: hydraulic, sheet thickness steel (max.): 4 mm, sheet thickness stainless steel (max.): 3 mm, input frequency: 50 Hz, type of input current: three-phase, overall weight: 900 kg, cutting length (max.): 150 mm, Equipment: angle stop, foot remote control, Cutting performance (90° notch) - Normal steel: 4.0 mm - Stainless steel: 3.0 mm Cutting angle: 30-120° Cutting length: 150 x 150 mm Working height: 900 mm Table: 1000 x 650 mm Motor power: 3.0 kW Weight approx. 900 kg Dimensions: 1250 x 1000 x 1160 mm (LxWxH) Equipment: - Angle adjustment 30° - 120 ° continuously - 2 digital displays for the adjustable stops * Set-up stroke * Single stroke * Continuous stroke - Plexiglass protection for better transparency - Hardened blades also for cutting stainless steel Gedpfx Afjvk I Avs Aeka - Adjustable stroke height setting - Removable cutting container - Freely movable foot switch BOSCHERT angle adjustment: - the one-piece 30° The upper blade is directly connected to both a left and a right lower blade within a tool - for each notch over 30°, the notch is made once to the left and once to the right. - the swivel adjustment is carried out pneumatically immediately after the first notch has been completed. The machine can be demonstrated on site with power on. All information is provided without guarantee. Subject to errors and prior sale.

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, ELGO Positioning System Electric blade gap adjustment. Rear thin sheet metal support/carriage, pneumatic and monobloc, length 700 mm. Square stop 1500 mm + 2 supports of 1000 mm Specifications Cutting length: 3100 mm Gkodpfjymyc Rex Af Asa Max. steel thickness: 10 mm Max. stainless steel thickness: 6 mm Number of sheet clamps: 15 Motorized back gauge stroke: 1000 mm Main motor power: 14.9 kW Weight: 10,500 kg Machine dimensions (L x W x H): 3900 x 2450 x 2200 mm

Condition: ready for operation (used), Max. workpiece thickness: 20mm, including one unused and originally packed set of blades. Gedpeim Ixfefx Af Aoka

Condition: as good as new (ex-display), Year of construction: 2026, Boschert brush deburring machine model K3 for deburring straight sheet edges and on the lateral aggragate suitable for cut-outs and notches up to 70 mm deep as well as outer radii on sheet metal. 3 motors á 1,5 kW Gsdpfx Astr Avijf Aeka brush diameter : 300 mm Material: wire brushes VA/steel Material range: 0.8-8 mm thickness Machine dimensions: Width: 1400 mm Height: 580 mm Depth: 670 mm Underframe: 800 mm high (working height 920 mm) Table support: 200x1400 mm Hold-down device as sheet guide The sheet edge is deburred simultaneously from above and below as it passes by. If the burr is very thick, the motors can be synchronized so that both remove the thick burr from the top. The 3rd (lateral) unit is for deburring external contours and is switched on separately. A larger lateral table support serves as a shelf

Condition: good (used), Year of construction: 2001, Punching machine, Boschert EL300 Tooling system: AMADA Up to tool station D, diameter 88.9 mm New tool adapters for stations A/B/C Punching force: 280 kN (28 tons) Gkedpfx Ajdnny Ref Aja Punching arm outreach: 350 mm Side stop: 500 mm, right/left Depth stop with digital display Side stops: new Total weight: 2300 kg

Condition: excellent (used), Year of construction: 2006, punching force: 28 t, sheet thickness (max.): 10 mm, sheet thickness steel (max.): 6 mm, punching diameter: 105 mm, throat depth: 1,500 mm, Boschert TWIN 1500x3000 Rota-Index Gkjdpfx Afex Tp Rfe Aoa Quick-change tool system TRUMPF Station 1: Rotating with indexing option for Boschert Multitool Max. punching diameter 105 mm, infinitely rotatable tool Station 2: Max. punching diameter 105 mm, with option for Boschert Multitool Revotool adapter incl. 8-position tool holder Punching force: 280 kN (28 tons) Travel range: x-axis 2050 mm (repositioning up to 9999 mm) y-axis 1580 mm Throat depth: 1750 mm Tool system: Trumpf Gr1-3 (105 mm) and Boschert Revotool Labod 32060 graphic control / workshop programmable Max. sheet thickness: 6 mm (clamp opening) Max. stroke height: 90 mm, infinitely programmable upwards and downwards Table width left + right: 2250 mm each Table depth: 3250 mm Table height: 900 mm Overall width: 4900 mm Overall depth: 4800 mm Overall height: 2080 mm Drive power: 20 kVA Machine weight: 15,000 kg Hydraulic oil capacity: 160 l Color: Blue RAL5017 / Light Grey RAL7035 Year of manufacture: 2006 Ball transfer table Slug extraction system Fast hydraulic system Very well maintained condition Comes with accessories

Condition: as good as new (ex-display), Year of construction: 2024, Boschert LB13 blanking machine Type LB13 blanking/Trumpf Cutting capacity: 6 mm St40 / 4 mm V2A Internal stop for cutting strips. Gksdohp N Ryjpfx Af Asa Station 2: blanking with Trumpf tool system Punch diameter max. 76 mm Overhang 150 mm Punching force approx. 15 tons with active stripping system Demonstration machine Year of manufacture: 2022

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 560 t, stroke length: 500 mm, operating speed: 10 mm/s, reverse speed: 30 mm/s, table width: 1,400 mm, clearance between the columns: 1,260 mm, total length: 2,010 mm, total width: 1,600 mm, total height: 2,200 mm, overall weight: 4,800 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, safety light barrier, We are offering this very good Boschert Quick-Bend 56 CNC press brake, manufactured in 2018. Manufacturer: Boschert Model: Quick-Bend 56 CNC Year of manufacture: 2018 Condition: very good Category ID: 1466 Type ID: 1717 Machine type: press brake Gkedpey Nbw Aefx Af Aja If you have any further questions or need more information, please send us a message or give us a call.

Condition: good (used), functionality: fully functional, Boschert EL 300 The Boschert EL 300 is a manual punching machine with a punching force of 28 tons. Godpfx Afeznu H So Aska Equipped with a Trumpf tool holder, dies up to size III (pitch circle 105 mm) can be installed. It offers continuous stroke, single stroke, and jog mode operation. In addition to the standard foot pedal, the punching stroke can also be activated via a two-hand control, which is particularly useful for workpieces where the acrylic shield must remain in the upper position (e.g., L-shaped brackets), allowing operation via the two-hand control. The integrated drawers are ideal for storing punching tools and accessories. The simple operation and quick tool change make this machine accessible to everyone.

Condition: excellent (used), functionality: fully functional, Boschert EasySharp The Boschert EasySharp is the economical solution for professionally re-sharpening punching tools. Specifically designed for the requirements of modern sheet metal processing, it enables the precise sharpening of punches and dies of various tool systems. The EasySharp is equipped for grinding Trumpf tools, but upon request and for an additional charge, it can be supplied with attachments for Amada tools. The EasySharp is in very good optical and technical condition and was recently refurbished this year. Gksdpoznlb Tefx Af Aea Grinding wheel diameter: 175 mm Vertical adjustment: 150 mm Feed increments: 0.02 mm Working area: 400 mm x 150 mm Working height: 1100 mm Dimensions with base frame: 800 x 520 x 1300 mm Weight: 160 kg

Condition: excellent (used), functionality: fully functional, Boschert LB 13 KE Hydraulic 2-station machine for notching and cutting. The LB 13 KE differs from the basic model by having a second work station. Station 1 Notching with a fixed angle of 90°, cutting length 225mm x 225mm, 6mm steel (St 40), 4mm stainless steel. Gedpfsznlavjx Af Ajka Station 2 Cutting to a depth of 100 mm, 25 mm wide (adjustable width), 4 mm thick in steel (St 40), 3 mm thick in stainless steel. The LB 13 KE is in very good condition and is fully functional. Length: 1350 mm Width: 1100 mm Height: 1400 mm Table height: 900 mm Weight: 1100 kg

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, punching force: 28 t, workpiece weight (max.): 200 kg, working width: 3,080 mm, working length: 1,560 mm, The following components of the machine have been renewed: Festo pneumatic system Brand new Labod control system Replacement of the Y-axis bearings TECHNICAL DETAILS Working area: 1,560 × 3,080 mm Sheet metal length through repositioning: max. 9,999 mm Hydraulic punching force: max. 280 kN Workpiece weight: max. 200 kg Positioning speed of the X-axis: max. 60 m/min Positioning speed of the Y-axis: max. 60 m/min Simultaneous positioning speed of the X and Y axes: max. 85 m/min Stroke rate with standard hydraulics: max. 250 strokes/min Stroke rate with quick hydraulics: max. 800 strokes/min Gedpfxezl Srao Af Ajka EQUIPMENT BOSCHERT software Note: The machine has already been disassembled.

Condition: used, Year of construction: 1993, Station 1 Unlatching: Max. sheet thickness: 6 mm steel, 4 mm stainless steel Fixed 90-degree angle with stops Gkodpfx Ajyzgnqef Aoa Blade length 225 mm Station 2 Cutting Max. cutting width: in one pass 25 mm at 100 mm cutting depth Max. sheet thickness: 4 mm steel Weight: 800 kg

Condition: used, Year of construction: 1984, plate thickness 4 mm ST plate thickness 3 mm VA Gkodpfxoxqhp Ej Af Aoa blade length 225 mm engine output 3,5 kW weight of the machine ca. 650 kg dimensions of the machine ca. 1250 x 900 x 1100 mm Features: - 2x miter stops - 90° fixed angle - Foot switch