Elect./Voltage: 240 V, 60 Cy, 1 Ph.
KOCH RAPID CURE RC38UV Curing Oven with in & outfeed conveyor; 48-1/2"" max. width cap., -- (1) 80 amp fixed mercury UV lamp (for clear finishes); (3) Intensity settings of 300 - 200 & 130 WPI with adjustable heght across the 48-1/2"" width x 10' length belt conveyor, -- Variable speed 0 - 100 FPM, legs adjustable to working height. -- Totally enclosed Oven with (1) top mounted exhaust fan with DAYTON 0.75 HP - 1,725 RPM motor. -- Separate ... more
Manufacturer: Artur Nagy
Type: Kts 53/40/70 spec.
Factory No.: 14752
Year of construction: 1998
Pneumatic actuation of the Parallelhebetuer, pneumatic cylinder will have a loosely supplied foot Steuerschieberbetaetigt. As a result, the operator charging work has free both hands.
Max temperature ° C 1150
3 x 400 Volt
Com. No.: 11348
Year of construction: 1996
Connection value heating kW 28
Muffelmasse 53 cm / 40 cm / 70 cm
Here we offer a Eliog-kelvitherm industrial oven curing oven TC 21. Industrial oven curing oven Application: The curing oven is suitable for heat treatment processes in which no combustible solvents are released. The curing oven is used for pre-drying of CFC-pipes. Temperature range up to max. 100 C air circulation vertically, from bottom to top circulation fan 1 piece a 5.5 kW exhaust fan 1 piece A 120 W, 20 kW heating capacity freqÃ¼nzgeregelt connected load 28 kVA Rated voltage 3 x 400 V; 50 ... more
Electric curing oven Fabr BLEIWENZ type KMO / E 8 Machine 301077/89 Year 1989 Technical data max. Temperature 1200 Interior dimensions W x H x D 500 x 315 x 800 mm Drive value 25.5 kW External dimensions L x W x H 1700 x 1500 x 2100 mm Weight about 2000 kg - automatic pneumatic door used, in very good condition
Â Specifications: - rated temperature / DaÃ¼rtemperatur continuously until 1100 - heating 4 each: ground, 2 side walls, rear wall - heat transfer by radiation - TemperatursteÃ¼rung on display and alarm unit EUROTHERM 2108i - Charge mass / area load max. 200 Kg - heating power 21 kW - 400 V / 23 kvA - interior Mass about B 500 x H 300 x D 800 mm - heating power 21 kW - required space ca. B 1250 x H 1800 x 1250 mm T - Weight approx 650 kg
Elect./Voltage: 240/480 V, 60 Cy, 3 Ph
BARBERAN HOK 16/2, Two Lamp UV Curing Oven.58"" Width x 3.1"" approx. height cap. feed through system for immediate curing of material, designed for curing of transparent UV coating; used after roll coater. -- Mounted diagonally on a tiltable swivel for maximum curing efficiency, powered by a 1 HP DC motor with speed control, dual chain roller conveyor with 3/4"" stainless steel rollers on 4"" centers. -- UV Lamps are fully enclosed & visual... more
Here we offer a Eliog-kelvitherm industrial oven curing oven TC 12. Industrial oven curing oven Application: The curing oven is suitable for heat treatment processes in which no combustible solvents are released. The curing oven is used for pre-drying of CFC-pipes. Temperature range up to max. 100 C air circulation vertically, from bottom to top circulation fan 1 piece a 5.5 kW exhaust fan 1 piece A 120 W, 20 kW heating capacity freqÃ¼nzgeregelt connected load 28 kVA Rated voltage 3 x 400 V; 50 ... more
Electrically heated curing oven Heraeus GmbH Hanau type make: 13 HM mach 28 024, diagram no. 1641 Specifications: Max. Rated temperature furnace 1150 Inside dimensions W x D x H 400 x 650 x 250 mm Rated power 20 kW external dimensions 1500 x 1300 x 1700 mm weight 940 kg
Elect./Voltage: 480 V, 60 Cy, 3 Ph.
CEFLA UV 2000 M/1INF & 2/IC & TTE 4850 SCR. This is a 2003 UV Oven with Two Top (2) direct focused [...] lamps mounted in angle for 3D curing and one (1) direct focused bottom [...] Composition: ● Provides direct emission of UV radiation, which are utilized in the curing of UV cured coating material(s ● Inclined mounted lamp unit(s) direct UV radiation to work piece edge for use in spray applications (edge and surface radiation). ●... more
Electrically heated curing oven Fabr HERAEUS type HM 13 mach 21103283/2832-01 Year 1980 m. Protective gas annealing muffle Specifications: Max. Rated temperature furnace 1150 max. Protective gas annealing muffle internal dimensions 250 x 920 400 x 650 mm Rated power 20 kW content of gasbespÃ¼lten space 68 liters External dimensions 1385 x 1915 x 1705 mm, used, in good condition, hardly used
Elect./Voltage: 480 V, 60 Cy, 3 Ph.
Outside Oven dimensions (overall): 11' Wide x 18' long x 11' high; (1) door at one end, 10' wide x 9' high with (2) 5' doors to make the opening. -- Heating Source: Natural Gas, FM approved, New with (1) year warranty, MAXON 500,000 BTU Burner, complete with Gas Train & Temperature controllers to 160°. -- Oven enclosure consists of 4"" thick x 11' long x 27"" wide heavy tongue & groove used panels. -- (2) Used Overhead turbulator type fans, e... more
horizontale droogoven; invoerbreedte 1400 mm, totale L 8500 mm, [...] opgebouwde afzuig droog ventilators op stalen constructie, Benteler in en uitvoer transfer-buffertransporteurs, totale L ca. 17000 mm, loopbrug, hoofdschakelkasten, [...]
for 58x78 cm sheets
4 oven racks
Automatic control store
40 kW nominal power consumption
Connected load 0,75.8
Voltage 400V AC / 3 phase / N / PE50Hz
Electric rotary kiln
with hood incl. fan
Height: 220 cm / Width: 160 cm / depth: 160 cm
Dimensions oven racks:
Height: 156 cm / Width: 64 cm / depth: 80 cm more
Elect./Voltage: 400 V, 50 Cy, 3 Ph.
MAKOR, model MULTILEVEL 6. Multi-Layer Drying / Flash-off Oven system with 6 belt [...] REFURBISHED UNIT with a NEW Control panels/user [...] Specifications:â¢ Multi level accumulator enables in-line flash-off utilizing minimal floor space.â¢ Six (6) flat belt type trays for product accumulation.â¢ Work length of each tray accommodates a charge of 4500 mm (177”).â¢ Heated enclosure provides an ideal flash-off environment for sprayed coat... more
Double Rack Oven
***Currently dismantled to remove from small bakery - requires rebuilding***
The price reflects this rebuild cost. This oven is particularly suitable for bakeries with access issues as it is already in a few pieces.
Oven is in very good condition.
Rotating base - Floor level
Net weight - 1950kg
In good condition. more
Drying oven, drying oven, electrode drying back, electrodes cabinet-power 0.9 kw max temp 300 C electrically heated steel lining-Interior dimensions 140/140/H460 mm mm External dimensions 380/350/H700 mm Weight 18 kg
digital control system MUCS
Stainless steel cladding
mobile on castors
8 inserts for sheets 60/40 cm
with proofer for 60x40 cm sheets
Rated voltage: 400 V
Frequency: 50 Hz more
Elect./Voltage: 480 V, 60 Cy, 3 Ph.
T & G ""29 x 9 x 9"" Gas Fired Turbulator Oven;Oven Dimensions (inside): 9' Wide x 29' long x 9' high -- Utilities - Electrical: 480 Volt, 3-Phase, 60 Hz. -- The Oven will have a 1,000,000 BTU Burner complete with Gas Train & temperature controllers with a max. temperature of 180°. -- Oven enclosure Panels (USED) consist of: 20-Gauge, aluminized 4"" thick x 12' long x 27 1/2"" wide, Heavy interlocking steel tongue & groove panels. -- There is ... more
Drying oven, drying oven, electrode drying back, electrodes cabinet power 1,2 kw max temp 300 C electrically heated steel lining-Interior dimensions 140/140/H460 mm mm External dimensions 380/350/H700 mm Weight 18 kg
Used rotary oven W&P, Type: Rototherm
- for baking sheets 60 x 80 cm
- fully functional
- condition: good
- incl. proving chamber with accessories (1997)
- baking space: 10 m²
- dimensions: W 1.550 x H 2.390 x D 1.607 mm
- dismantling necessary (of course we can do it for extra charge)
The oven is in a good condition and it is ready for operation. Inspection and test run are possible at every time. more
Mobile on castors
For 60x40 cm sheets
Also for 8 plates 60x80cm
Height: 210 cm
Width: 90 cm
Depth: 120 cm more
Here we offer a Heraeus drying oven oven heat oven.
Depth: 1235 mm width: 1713 mm height: 2492 mm
Internal dimensions: 1000 x 1000 x 1580 mm
Rated voltage 380V 3 / N / PE AC 50/60 Hz
Nominal current 58 A
Nominal power 37, 5kW
Connection value 40 kVA
Utility room 3.125 m³ steam room 4, 42 m³
Minimum exhaust volume flow 480 m3/h
Nenntemp: 250 ° C
Type: LTU 125/200
Condition: pre-owned / used
Scope of delivery: (See image)
(Errors and omissions in the technical ... more
Elect./Voltage: 480 V, 60 Cy, 3 Ph.
This FALCIONI / CEFLA is a great way to cure finished wood product of all sizes and shapes. Casegoods, flat panels, assembled furnituer up to 51"" Width cap. -- There are 12 carts that are 3' x 7' that are attached to a drag chane conveyor by one side of the cart. The carts are loaded with wet painted parts and then pulled thru a system with a heated forced air flow in the direction to allow for a gentle & fast evaporation of different solvents o... more
commercial convection / microwave oven
up to 5x faster than a conventional convection oven
11 performance levels
user-friendly LCD panels (0-9)
electronic control and LCD display
Digital display with remaining run indication
Inner and outer housing made of CNS
3400 W / 230V
Outside dimensions: 489/667 / 464mm W / D / H
Gross weight 46 kg more
Elect./Voltage: 208-220/440V, 60 Cy, 3 Ph.
DUBOIS HV 52 #2 High Velocity Hot Air Oven; Oven/Curing System consisting of: -- Powered belt conveyor, 52""W x 588""L, 2 HP gear drive motor, 80"" receiving belt length. -- High velocity gas fired hot air oven, 53"" x 11"" opening, 384"" tunnel length, (2) NY blower 5 HP recirculation fans, NY Blower ""15PLP"" exhaust fan, 1/3 HP combustion air fan. -- (7) 5"" x 29"" UV post cure lights, DUBOIS Control Panel. more
TECHNICAL DETAILS, Cracked ammonia generator for heat treatment . brazing and, welding (avoiding oxydation. and coloration)., At output. constant composition of 25% nitrogen. 75% hydrogen., For 1 kg of ammonia. 2.7 m3 of strongly reducing protective gas is produced., MAx. flow rate : 3 [m3/heure], power : 3 [kW], temperature max.: 950 [°]
Dimensions (l x w x h) approx.: 1000 x 1000 x 2500 mm
Weight approx.: 120 kg
Description: Suction arm length approx. 2500 mm, junction, various connection pipes
In Online Auction with approx. 49 further Machine Tools and other Assets!
Bidding ends: Thursday, 22 February 2018 from 12pm (local time)
Auction start price: EUR 150 (plus VAT and 15% buyers premium)
Your contact person: Dennis Pawlin more
for 10 plates 60x40
with cabinet for 60x40 plates 18 runs
Control IS 600
all stainless steel clad
Door hinge right
400 V - 50 Hz - 26.6 A - 18,4 kW
Height: about 210 cm
Width: about 95 cm
Depth: 90 cm more
Heat oven, convection oven, drying oven DAVID + BAADER type ITHU-HT
Ident. No. 602631 year 1994
Temperature of Max 580 ° C
Internal dimensions W x D x H 590 x 650 x 600 mm
Door opening width 990 mm x height 680 mm
Utility room 0.25 m3
Steam room 0.34 m3
Exhaust air flow rate 83 m 3/h (open flap)
Exhaust air flow rate 45 m 3/h (ventilation flaps closed)
Heating capacity 15 kW
Power supply 17 kVA
Power supply 400 Volt, 50 Hz
-uniform temperature level by circulation fan for ai... more
Drying oven, drying Cabinet, rear electrode drying, electrode Cabinet
-Trockenofen with isolating transformer
-Max temp. ° C
Interior dimensions 100 x 420 mm
-3 x furnaces available
Dimensions oven 170/190/H570 mm
Dimensions Trafo 330/220/H360 mm
Weight 14 kg / piece
DIDN'T FIND ANYTHING SUITABLE?
Save this search now and we will inform you about new machines free of charge!
All information, offers and prices on this site are subject to change and non-binding!
By using this website, you acknowledge and agree to our Terms & Conditions and Privacy Statement.
All brand names are the property of their respective owners. Thorsten Muschler GmbH
does not accept any liability for the content of linked websites.