Used Dryer System for sale (38,542)

Condition: used, Year of construction: 2008, total length: 15,000 mm, total width: 3,100 mm, total height: 3,150 mm, overall weight: 15,000 kg, Equipment: CE marking, No. 04553 Drum dryer / firewood drying system S&Ü SHT 50 Used, year of construction 2008 Suitable for drying firewood as well as other bulk and piece materials, e.g. wood chips, sawdust or compost Container volume 58 m3 Filling volume approx. 50 m3 of bulk material Drum diameter 2500 mm Overall length approx. 15000 mm Overall width approx. 2900 mm Empty weight approx. 12530 kg Loading via filling hopper, e.g. by wheel loader or conveyor system Internal conveying spiral for transporting and turning the drying material Drum drive via electric geared motor and multiple-chain drive Drum speed adjustable via frequency converter Automatic drying operation with timer control Fan speed adjustable via frequency converter Hydraulically liftable filling hopper for unloading Unloading by reversing the direction of drum rotation Drying time depending on initial moisture content, type of material, hot air volume and temperature Typical drying time for firewood approx. 5 - 7 days at approx. 200 kW heating capacity Heat exchanger: Max. heating capacity approx. 250 kW At 90 °C water supply temperature Fgjdpfxoztrpze Apwjf Medium flow rate approx. 12 m3/h At 15 °C outside temperature Hydraulic unit 3 kW Fan 7.5 kW Drum drive 8 kW Noise emission approx. 98 dB(A) with optimum filling level Current consumption 45 A Fuse protection 63 A Voltage 400 V, 3L/PEN Frequency 50 Hz Hydraulic oil capacity 10 l Transport dimensions approx. 15000 x 3100 x 3150 mm LWH Weight approx. 15000 kg Sale on behalf of customer, ex location near 63452 Hanau, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex location

Condition: used, No. 3213 Thermal treatment system / vacuum dryer WTT Used, year of construction 2017 Fsdpfsv Si Szox Apwjgf Thermal treatment system / thermal chamber for the modification of wood The WTT thermal chamber is a system for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on the thickness and type of wood. The system has a powerful energy and heat transfer system and works with a gas or oil-fired boiler system that uses thermal oil as a heat transfer medium. Technical data: Capacity: 5950 - 9900 m³ of wood per year (for 330 working days) Usable volume: 9 m³ (with 50 mm wood thickness) Stack dimensions: 10500 x 1300 x 1100 mm LWH Minimum board thickness: 10 mm Power connection: 3 x 400 V, 50 Hz + zero + earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heat output: 2 MW (230 °C - 250 °C thermal oil) Heat consumption: 120 kWh/m³ wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm stainless steel duplex EN 4462 Door opens hydraulically, with 1.5 kW drive Working pressure: 0.1 to 15 bar (absolute) Working temperature: 0 °C to 220 °C 200 mm glass wool insulation, clad with 1 mm galvanized sheet steel Main components: 1. autoclave, in which the heat treatment takes place 2. vacuum system that sucks the air out of the autoclave before heat is applied 3. energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. nitrogen generator 6. gas cooler system Heating and cooling system: Heat exchanger: 8 units (4 on each side) Material: Stainless steel pipes (seawater resistant) Total floor area: 165 m² Cooling water consumption: 1000 l/batch (not contaminated, only heated) Control and operation: Control system: WTT ExoT (fully automatic) 22” color monitor, IBM computer, printer Sensors: 4 PT100 temperature sensors 2 mechanical thermometers 1 vacuum/pressure transmitter 1 mechanical vacuum/pressure gauge Special equipment: Hydraulic rail bridge for convenient transportation of wooden trolleys Automatic trolley extraction with cable winch (1.5 kW) 2 MW thermal oil boiler (heating) Fuel oil tank (4000 l) with measuring system Insulated 20 foot steel container for heating module Stainless steel safety chimney (300 mm diameter, 6000 mm length) Functional description: 1. filling the autoclave with wood 2. creating a pre-vacuum 3. filling with gas 4. heating 5. modifying 6. cooling 7. pressure equalization 8. creating a post-vacuum / drying 9. pressure equalization 10. emptying Certified EC Pressure Equipment Directive (PED) 97/23/EF Construction EN 13445 Sale on behalf of customer, from location near 5020 Salzburg (Austria), without dismantling, transportation and assembly Dismantling, loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: excellent (used), Complete material drying and feeding system by Motan — ready to connect to injection or blow molding machines. The system includes three integrated components: 1. Material vacuum loader (Motan METRO series) Automatic pellet conveying from bag/bulk bag to hopper Electric motor with vacuum turbine Dust filter and discharge valve 2. Stainless steel drying hopper Conical, insulated stainless steel construction Internal heating element and temperature sensor Estimated capacity: [80 / 120 / 200] liters — to be confirmed 3. Motan LUXOR desiccant dehumidifier (orange cabinet) Twin-tower molecular sieve dehumidification Automatic regeneration cycle Process air temperature: up to 180°C (depending on material) Dew point: −40°C (typical for Motan LUXOR series) Integrated PLC control 380V three-phase Fgsdpfjzhcrvsx Apwjf Suitable for PMMA, SAN, PC, ABS, PET, PA (nylon), PE, PP, PS and all hygroscopic engineering plastics. Essential for cosmetic, optical, and technical injection molding. Application Pre-drying and feeding of plastic granules to injection molding machines, blow molding machines, and extruders. The system removes moisture from pellets to prevent surface defects (bubbles, streaks, hydrolysis) in finished parts. Technical specifications Brand: Motan (Motan-Colortronic) Model: LUXOR [80 / 120 / 200] — to confirm with rating plate Year: [approx. late 1990s / early 2000s] Voltage: 380V three-phase Origin: Germany Configuration: Complete dryer + hopper + loader

Condition: used, Compressed air dryer PARKER HIROSS for compressor systems Mechanical condensate separator, water separator Refrigerant dryer with water-cooled aftercooler for removing water vapor and cooling the compressed air or gases. 1 aftercooler, type WFN009 DHH16 Air flow rate (normal): 540 m3/h = 9000 liters/min. Operating pressure (air): max. 16 bar Housing length: 1020 mm Housing diameter: Ø 105 mm Threaded air connection: G 2" Threaded water connection: G 3/4" Weight of aftercooler: 11 kg Dimensions of aftercooler (L x W x H): 1030 x 850 x 200 mm + 1 water separator, type CSP 008 Flow rate (normal): 480 m3/h = 8000 liters/min. Operating pressure: max. 16 bar Threaded connection: G 2" - Filter housing made of aluminum Fsdpfx Asdzqn Uepwjgf + 1 mechanical condensate separator HIROSS SAC 120 Threaded connections: R 1/2" Operating pressure: 16 bar Volume: 0.8 liters - Operates without compressed air loss All components mounted as shown in the pictures. Height when mounted vertically: 2000 mm Total weight: approx. 40 kg

Year of construction: 1990, condition: good (used), Compressor system with air dryer and compressed air tank. Length: 800mm Width: 800mm Height: 1000mm Volume: 1.5m³/min Power: 11kW Fgsdpfeinur Aex Apwef

Condition: like new (used), Year of construction: 2021, operating hours: 10 h, functionality: fully functional, machine/vehicle number: ABT 1/2000-8, type of input current: AC, overall weight: 4,200 kg, input voltage: 400 V, input frequency: 50 Hz, The 2 tons/hour Belt Dryer System (model ABT 1/2000-8) is an industrial drying unit manufactured by ASOS PROSES MAKİNA SAN. VE TİC. A.Ş. (Turkey). It is designed for the continuous drying of granular or particulate materials such as pet food, cereals, grains, feed, agricultural products, and similar bulk goods. The system operates indoors on a single production line, 24 hours per day, under ambient temperatures of 5–35 °C and relative humidity between 60–80 %, at sea level. Fsdpoyb Rpdofx Apwsgf The machine is engineered to reduce moisture content from 28 % to 12 %, with a feed rate of 2,000 kg/h, evaporating 364 kg of water per hour, and delivering a dry output of 1,636 kg/h. It requires 364,000 kcal/h of thermal energy, typically provided by combustible gas, with a drying temperature range of 50–60 °C. Total electrical consumption is 37 kW, with 46.2 kW installed power, powered at 400 V / 3-phase / 50 Hz, and an estimated nominal current of ≈ 78.5 A. Noise levels are below 85 dB(A) at 1 m. The required installation space is 4 m (width) × 10 m (length) × 4 m (height). The Belt Dryer unit has a drying surface of 16 m², a belt width of 2,000 mm, and a length of 8,000 mm. It uses a single-pass polyester belt. Both upper and lower casings are made of galvanized steel with rock wool insulation on heated surfaces. Inspection hatches and instrument sockets are provided on both sides for easy access and monitoring. The system includes a spreader unit for uniform material distribution, a burner chamber (400,000 kcal/h, carbon steel), and a set of circulation and exhaust fans (galvanized steel, direct drive, VSD). Multiple motors (totaling 46.2 kW) drive feeding, mixing, drying, ventilation, and heat exchange equipment. Control is managed through a floor-standing MCC and PLC cabinet (IP55, 600×4000×2200 mm), equipped with a Siemens S7-1500 PLC, 17" SCADA touchscreen (TP1900), Profinet communication, and ABB/Danfoss VSDs. All signal and power cables and galvanized trays are included, along with galvanized structural supports. The system is suitable for industrial-scale drying operations in the food, feed, agricultural, and processing industries, offering stable performance, low noise, and automated control. It is built for durability with galvanized steel construction, easy maintenance access, and optional on-site erection and commissioning by ASOS engineers. Delivery time is typically 10–12 months from advance payment, and the equipment is guaranteed for one year against material and manufacturing defects.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: A00.5392, total length: 10,600 mm, total width: 2,680 mm, total height: 3,190 mm, input voltage: 230 V, power: 45 kW (61.18 HP), Markert continuous washing system for washing and drying parts (e.g., metal cleaning) - Fully functional - Year of manufacture: 2000 - Designed for washing parts in baskets Fgodpfx Apsxb Dcvowjf - Suitable for use with alkaline or neutral cleaning agents - Drying via circulating air at 20°C - Exhaust air managed by steam condenser, 4500 m³/h Scope of delivery includes: 3 folders with technical documentation, operating manuals, drawings, etc. (all original from Markert) Please submit a purchase price offer for the machine.

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 20241204, total height: 905 mm, overall weight: 550 kg, total length: 1,200 mm, total width: 1,200 mm, type of input current: three-phase, tank capacity: 220 l, usable tank capacity: 110 l, input voltage: 400 V, workpiece width (max.): 200 mm, workpiece height (max.): 200 mm, outer diameter: 200 mm, workpiece length (max.): 200 mm, rotational speed (min.): 1,400 rpm, inner dimension width: 240 mm, power: 4.5 kW (6.12 HP), input frequency: 50 Hz, warranty duration: 12 months, load capacity: 100 kg, Vibra-Dry DK 200 WT maize dryer with pneumatic emptying and steel base. The high-quality Vibra-Dry DK 200 WT maize/grain dryer with a working volume of 220 liters is for sale. This versatile machine is perfect for drying and polishing with crushed corn granules, Fodpjvi Nhdofx Apwsgf resulting in a flawless and shiny surface. Main features: Working principle: The moist parts are automatically transported from the circular vibrator via the separating table into the dryer. Pneumatically controlled outlet valve: For automatic emptying after drying. Coating: Inner walls and inlet and outlet area with durable 2-component PU coating to minimize wear and reduce noise. Temperature control: Adjustable between 30°C and 50°C via manual control in the control cabinet, with levels for 0%, 50% and 100%. Automatic temperature maintenance by switching the heating on and off. Technical details: Filling with approx. 10-15% crushed maize granules (25 kg recommended). Commissioning: Use of GM 16 or GM 20 maize grains required. The machine is reliable, robust and ideal for farms that value quality and efficiency. Enquire now!

Condition: excellent (used), Mathis THN 10988 Laboratory Thermosol System Application This padder-dryer combination has proven itself extremely effective in practice. It is used in this form for a wide variety of hot air treatment processes, such as drying, setting, condensing, thermosolizing, etc. This system is used wherever a certain sample size is required, for example, to produce sample collections or similar. THA Dryer If the padder and dryer are to be used separately in addition to continuous operation, the THA dryer should be selected. This unit is equipped with an unwinder at the dryer inlet and an extractor at its outlet. This element determines the fabric speed when operated separately. This offers the advantage of using the padder and dryer independently and simultaneously. The fabric is then transferred to the dryer for drying, setting, condensing, etc. If all of the above-mentioned applications are to be ensured and if the use of pin frames is also desired for stand-alone operation of the dryer, the THN model is preferable. The standard pin frames are suitable for a sample size of max. 50 x 50 cm (larger pin frames available upon request). Lengthwise adjustable frames for woven fabrics or lengthwise and widthwise adjustable material holders for warp-knitted and knitted fabrics, nonwovens, etc., as well as clamp frames for foils and paper, are available. Drying Chamber The drying chamber, including the electrical equipment box and control panel, are mounted on a base frame and bolted together to form a single unit. Good thermal insulation of the dryer is ensured by its double-walled construction with insulation between them. The nozzle array, with a length of 1300 mm, is divided into an upper and lower nozzle compartment. A control flap allows for equal ventilation from top and bottom, or more air from top or bottom. Fan and Heater Intense air circulation is ensured by a powerful fan with a capacity of approximately 900-3500 m³/h, combined with a well-tuned heating output, resulting in optimal evaporation performance. A dual-protection monitoring system reduces maintenance and increases the operational reliability of the dryer. The heating capacity is designed for rapid heating and is automatically reduced once the desired temperature is reached to avoid unnecessary power surges. The temperature is controlled by an electronic measuring and control device in the range of 20-250°C. The fresh air is drawn directly into the recirculation fan via a fan. The desired flow rate can be adjusted using a step switch. Technical Specifications Air velocity approx. 4-12 m/sec Air flow approx. 900-3500 m3/h Temperature range up to 250°C Heating output approx. 27 kW Nozzle area 1300 mm Fabric tension continuously adjustable Fresh air supply adjustable to multiple levels Dimensions: LxWxH = 4800 x 1380 x 1750 mm Purchase price: €86,275 Fedeu D Arijpfx Apwegf Financing through our bank is also possible. komplett-konzept.leasingo.de Other items in other sizes – new and used – can be found in our shop! International shipping costs upon request!

Year of construction: 2011, condition: excellent (used), BURKLE PROCESS TECHNOLOGIES Düsentrockner-Anlage DURCHLAUFTROCKNER TRDUE 700 Nozzle Dryer System one-sided drying of various media on plane parts parts can be heated by the built-in IR emitter Fgodpfxsd R Sb Ij Apwef

Condition: used, Accordion flexible conveyorBrand: Soco SystemWidth: 40 cmMinimum length: 155 cmMaximum possible length: 540 cmHeight: adjustable legs (70 cm in the photo) Fodsztf I Repfx Apwegf

Condition: excellent (used), Conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor, flat belt conveyor -Manufacturer: Soco, conveyor belt with roller track and pneumatic equipment -Speed: 22 m/min -Belt width: 380 mm -Conveyor length: 740 mm -Drive: 0.12 kW, see photo of nameplate -Roller width: 365 mm -Roller diameter: 48 mm -Roller spacing: 60 mm Fgjdpfxozrvgnj Apwjf -Individual components: see photos -Dimensions: 1715/640/H930 mm -Weight: 92 kg

Condition: used, This listing is for Bio-Rad Trans-Blot Turbo 690BR Transfer System Fedpfx Apoztpubewjgf The unit is in full working condition and ready for immediate use The Trans-Blot Turbo is a rapid protein transfer system designed for transferring proteins from electrophoresis gels to membranes for Western blotting. It provides a compact, efficient solution for routine laboratory protein analysis Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory

Condition: excellent (used), I am offering for sale a professional HBM MGCplus measuring system from Hottinger Baldwin Messtechnik (HBM). This is a high-end, modular measuring amplifier used in research laboratories, industry, and testing stations for signal acquisition and analysis from sensors. The device is equipped with a control panel with an LCD display and installed measuring modules. The unit being sold was removed from an industrial installation. Specifications: • Manufacturer: HBM – Hottinger Baldwin Messtechnik • Model: MGCplus Fgedpfx Aozru Rrspwof • Control unit: AB22A • Installed modules: ML60B BL01 (2 units) AP17 SY03 • Power supply: 115–230 V AC, 50–60 Hz • Maximum power consumption: 300 VA Condition: • Used. • Visual condition as shown in the photos – normal signs of use.

Condition: used, Used stainless steel container / transport container / IBC Last use: Solvent Fedpfxsu Ngqtj Apwogf Item number: 10848 Volume: 800 liters Type: Vertical in galvanized stacking frame Material (wetted parts): 1.4301 / AISI304 Manhole 400mm Design: Single-walled Operating pressure according to type plate: 0.10 bar Empty weight: 213 kg Tank dimensions: Total width: 1020mm Total length: 1220mm Total height: 1400mm Height of the feet: 100mm Materials: Interior: 1.4301 / AISI 304 External parts: Galvanized steel Equipment: Type plate: yes Outlet diameter: 40mm Outlet valve: ball valve Distance drain to floor: 265mm

Condition: used, axle configuration: 2 axles, first registration: 02/2008, loading space length: 13,580 mm, loading space width: 2,490 mm, loading space height: 2,480 mm, total length: 14,100 mm, total width: 2,600 mm, total height: 4,000 mm, suspension: air, tire size: 385/55R22,5, wheelbase: 9,010 mm, color: other, Year of construction: 2008, Equipment: ABS, tail-lift, = Additional Options and Accessories = - EBS - Tail lift = Remarks = Number of axles: 3, Payload: 31991 kg, Tare weight: 7009 kg, Gross vehicle weight: 39000 kg, Chassis type: Complete chassis, Chassis material: Steel, Kingpin size: 2 inch, Suspension type: Full air suspension, ABS, EBS, Body construction year: 2008, Side wall material: Insulated, Refrigeration unit manufacturer: Carrier, Refrigeration unit model: Vector 1850, Refrigeration unit: Diesel/electric, Unit hours / electric: 2624, Unit hours / Diesel: 13444, Wall thickness: 40 mm, Type of cooling: Cooling, Axle type: BPW, Tail lift = Further Information = General information Cab: Day cab License plate: OK-27-FG Drivetrain Fuel type: Diesel Transmission Transmission: Manual gearbox Axle configuration Tire size: 385/55R22,5 Fgjdpozni I Refx Apwsf Brakes: Disc brakes Suspension: Air suspension Axle 1: Steerable; Tire tread depth left: 4 mm; Tire tread depth right: 4 mm Axle 2: Steerable; Tire tread depth left: 7 mm; Tire tread depth right: 9 mm Weights Unladen weight: 7,009 kg Payload: 31,991 kg GVW: 39,000 kg Functional Refrigeration unit: Diesel and electric (13444 operating hours diesel; 2624 electric) Wall thickness: 40 mm Environmental Emissions class: Euro 0 Condition Overall condition: average Technical condition: average Optical condition: average Damage: none = Company Information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing stock • Recognizable quality • A good price • Honest business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration is quickly arranged • Expert technical services • The security of "recognizable quality" • And more... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry via our website. Ask directly about our European warranty package.

Condition: used, axle configuration: 2 axles, first registration: 04/2016, suspension: air, tire size: 385/65 R22.5, color: other, Year of construction: 2016, Equipment: tail-lift, Axle configuration Tire size: 385/65 R22.5 Axle brand: BPW Brakes: Disc brakes Rear axle 1: Lift axle; tire tread depth left: 2 mm; tire tread depth right: 8 mm; suspension: air suspension Rear axle 2: tire tread depth left: 6 mm; tire tread depth right: 2 mm Weights Unladen weight: 9,350 kg Payload: 23,650 kg Fsdpszrnyysfx Apwegf GVW: 33,000 kg Functional Tail lift: Dhollandia DHLM.30, 3000 kg Condition Damage: none

Condition: used, axle configuration: 3 axles, first registration: 04/2012, suspension: air, tire size: 385/65 R22.5, color: other, Year of construction: 2012, Axle configuration Tire size: 385/65 R22.5 Axle brand: SAF Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Tire tread depth left: 4 mm; Tire tread depth right: 12 mm Rear axle 2: Tire tread depth left: 12 mm; Tire tread depth right: 12 mm Rear axle 3: Tire tread depth left: 10 mm; Tire tread depth right: 9 mm Fgodpfxszra Tls Apwof Weights Unladen weight: 6,595 kg Payload: 32,405 kg GVW: 39,000 kg Condition Damage: None

Condition: good (used), axle configuration: 3 axles, first registration: 03/2021, loading space length: 13,600 mm, loading space width: 2,460 mm, loading space height: 2,830 mm, total length: 13,900 mm, total width: 2,550 mm, total height: 4,050 mm, suspension: air, tire size: 385/55R22,5, color: other, Year of construction: 2021, Equipment: ABS, = Additional Options and Accessories = - EBS = Notes = Number of axles: 3, Tare weight: 8070 kg, Gross vehicle weight: 43000 kg, Chassis type: Full chassis, Chassis material: Steel, Kingpin size: 2 inch, Suspension type: Full air suspension, ABS, EBS, Body construction year: 2021, Axle type: SAF, MEGA DOUBLE DECK // HARD WOOD FLOOR // SAF DISC BRAKES / LIFTING AXLE = Further Information = General Information Cab: Day cab License plate: KLEYN1 Drivetrain Fuel type: Diesel Transmission Transmission: Manual gearbox Axle Configuration Tire size: 385/55R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Lifting axle; Tire tread depth left: 6 mm; Tire tread depth right: 4 mm Fgsdsy Irnvspfx Apwjf Axle 2: Tire tread depth left: 12 mm; Tire tread depth right: 11 mm Axle 3: Tire tread depth left: 4 mm; Tire tread depth right: 4 mm Weights Tare weight: 8,070 kg Payload: 34,930 kg GVW: 43,000 kg Environment Emission class: Euro 0 Condition Technical condition: good Optical condition: good Damage: none Financial Information Leasing price: 335 € per month (default, 60 months); Ask for more information and conditions = Company Information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands from various years of construction and price ranges. Why buy from Kleyn Trucks? It's simple! • Large and rapidly changing stock • Recognizable quality • A good price • Proper business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration is quickly arranged • Expert technical services • The security of "recognizable quality" • And more... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry via our website. Ask directly about our European warranty package.

Condition: new, table length 2000 mm table width 1200 mm table height 200 mm bore 28 mm weight 843 kg Specifications - High-quality S355J2+N steel + plasma nitriding - Material thickness approx. 24.5–27 mm - Hole diameter 28 mm - Holes in 100×100 mm grid pattern - Rounded corners, edges and holes - Side panel height 200 mm - Hole spacing on side panel: 50 mm Fedpfxoznngrs Apwjgf - Includes scale markings on the surface - Construction reinforced with ribs - Grid lines enable precise set-ups - Special equipment for welding tables is available on request.

Condition: new, table length 1500 mm table width 1000 mm Fgjdpeznngfsfx Apwef table height 200 mm bore 28 mm weight 554 kg

Condition: not inspected (used), A used Videojet Laser marking System - untested but removed from a Pharma production facility and was in operation - includes a Bofa AD Oracle Laser Fume extractor Ready to Ship Worldwide Export Documentation included Fedpfsznt Hwex Apwsgf

Year of construction: 2021, condition: new, functionality: fully functional, machine/vehicle number: sn: 1100056463, This is a miniature Büchi B-290 spray dryer (Mini Spray Dryer), a high-quality piece of equipment suitable for various laboratory processes. It is a reliable and efficient tool for your laboratory experiments. This device is designed to provide consistent and accurate results with each use. Thanks to its excellent features, this spray dryer is ideal for the medical sector, laboratories, healthcare equipment and devices, the dental field, and industrial applications. It is a BÜCHI brand, model B-290 Mini Spray Dryer, serial number 100056463, year 2021; this equipment is NEW. Fsdezgw Tlepfx Apwegf Take advantage of this opportunity to acquire this exceptional tool and benefit from its practicality and performance.

Condition: new, Year of construction: 2026, Power 5.5 kW / 6.6 kW Inverter yes Motor speed 4500 rpm Voltage and frequency: 400V / 50Hz Tank: 200 liters Water resistance: IP23 Noise level: 75 dB Working pressure: 10 bar Air flow: 640 l/min Suction capacity: 750 l/min Discharge capacity: 640 l/min Drive type: Direct drive Outlet diameter: G 3/4″ Dryer: None Fgedpjzr Nauofx Apwof Air-to-oil cooler Screw manufacturer: BAOSI Inverter: GD300-01A Display: HTK070 / MAM6070 Dimensions (length/width/height): 1446 × 506 × 1096 mm Packaged dimensions (length/width/height): 1385 × 520 × 1200 mm Weight 180 kg / 200 kg

Condition: new, Year of construction: 2026, Saw Diameter: 500 mm Motor Power: 4 kW Cutting Range of the 500 mm Diameter Circular Saw Fodpfx Apoxdciajwjgf Cutting Capacity 0° (square) for solid material: 170 x 170 mm Cutting Capacity -45° (square) for solid material: 160 x 160 mm Cutting Capacity +45° (square) for solid material: 160 x 160 mm Cutting Angle: -67.5°, -45°, -30°, -22.5°, -15°, 0°, 15°, 22.5°, 30°, 45° Dimensions (without feeders): Width 825 mm x Depth 1074 mm x Height 1397 mm Saw Speed: 3000 rpm Motor: 4 kW, 50 Hz, 400V AC, three-phase (3PPE) power supply Machine weight: 220 kg Cutting disc diameter: 500 mm Cutting disc bore diameter: 32 mm Operating pressure in the pneumatic system: 6–8 bar Cooling system: The machine is equipped with an oil mist system to cool the cutting blade, which increases the tool's durability and performance. Note: A coolant tank is not included and must be installed by the customer.