Used Bed Dryer for sale (5,818)

Condition: used, Year of construction: 1989, Batch fluidised bed dryer in stainless steel with spray granulation. Manufacturer : Glatt Model: WSG-C200 Pgsdpfxex R An So Ab Uji Year: 1989 Previous use: pharmaceutical Product pan capacity: 700 litres. Product capacity: 200 – 280 Kg Air filtration and heating battery. Bag filtration Heat exchange: tubular Temperature control: multiple sensors Spraying: yes Watson Marlow peristaltic pump Spray nozzle Frame and tower: 316 stainless steel Electrical cabinet Sold with 2 pans and protective pockets Trolley reverser: available Documentation: available in German Spare parts Valves available Fan not available. Hot water generator / boiler not available

Condition: new, Year of construction: 2014, functionality: fully functional, UNUSED TEMA INDUSTRIAL DRYING PLANT – FLUID BED DRYER – COMPLETE SYSTEM A complete "Industrial Drying Plant manufactured by TEMA Process B.V. (Netherlands)" is available for sale. The system is based on a Shaking Fluid Bed Dryer technology and was originally designed for drying industrial materials such as sludge, minerals, chemical feedstocks and other high-moisture industrial products. The equipment has never been installed or commissioned and has been stored since delivery. Operating hours: 0 This is not just a dryer, but a complete industrial drying plant including conveying, filtration and control systems. --- # General Information Manufacturer: TEMA Process B.V. (Netherlands) System type: Shaking Fluid Bed Dryer / Cooler Year of manufacture: 2014 Condition: Unused – Never installed – Stored since purchase --- # Capacity * Water evaporation capacity: approx. 2.1 t/h * Dryer feed capacity: approx. 12,000 kg/h * Final product output: approx. 1,900 kg/h --- # Moisture Range Feed moisture: 40 – 60 % Final moisture: 10 – 15 % --- # Drying System * Shaking Fluid Bed Dryer with integrated cooling section * Drying air temperature: 120 – 250°C (nominal 190°C) * Direct fired natural gas air heater * Drying air flow: ~44,000 kg/h --- # Dryer Dimensions Fluidized bed area: 8.4 m² Dryer size: 7.3 m x 1.15 m --- # Energy Consumption Installed electrical power: ~218 kW Electrical consumption: ~160 kW Natural gas consumption: max. 190 Nm³/h --- # Scope of Supply (Complete Plant) The system includes the following equipment: Drying Unit * Shaking Fluid Bed Dryer / Cooler * Air supply system * Direct fired natural gas air heater * Recirculation fan * Combustion air fan * Cooling air fan --- Dust Separation and Filtration 2 Cyclone separators 1 Baghouse Filter Dust rotary valve Exhaust fan and ducting system 4 Explosion relief panels --- Material Handling System * Twin shaft paddle mixer * Granulator * Screw conveyors * Double screw conveyor * Bucket elevator * Product conveying system --- Automation and Control * MCC / PLC control system * Siemens S7-300 PLC platform * HMI operator panel * Upper control level ready for SCADA integration --- # Typical Applications The system can be used for drying various industrial materials including: * Industrial sludge * Minerals and mining products * Chemical raw materials * Recycling materials Pedpfx Aoyrxwwob Usgi * Paper and pulp industry residues * Fertilizer and organic materials * Biomass and other industrial feedstocks --- Condition * Never installed * Never commissioned * Stored since delivery * Complete plant available --- Location Turkey The equipment can be inspected on site. Additional technical documentation and photos are available for serious buyers.

Year of construction: 2017, condition: like new (used), Mobile fluid bed dryer on a trailer skit. included clothfilter. dryer survice is 5M2 Pedjhflwgspfx Ab Uegi

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, Machine originating from the dismantling of a plastics processing plant. Pgjdpsxyqzijfx Ab Usi

Condition: used, Bed plate 10ft x 5 ft x 4000kgs (approx) - Matched Pair Pgjdpfxjywziuj Ab Uji

Condition: used, Year of construction: 2017, functionality: fully functional, For sale: Fully operational and lightly used belt dryer from New eco-tec. Optionally available with air scrubber and 180m³ silo for dried goods. The plant was in operation until recently and is ready for immediate use. The system spans 2 containers and has a belt length of 24m, rated for 1.5MW thermal output. The belt dryer is entirely made of stainless steel inside the containers. Viewing by appointment. Pgodpfx Aoyr Aiqeb Usi

Year of construction: 2013, condition: used, functionality: fully functional, B+B Anlagenbau TR 100/200-P-V – Mechanical Dryer – Good Condition – Dismantled in Working Order For sale: B+B Anlagenbau type TR 100/200-P-V. The machine is in good condition and was dismantled while fully operational. Technically sound; only normal wear parts show wear. Worn wear parts: - Screens - Screen support edges (mounting frames) - Sealing rubbers The paddles inside the machine are still in good condition. A large number of spare paddles are included in the sale. Main drive motor: 55 kW Additional loose parts included: Podpfx Abeym Ag Eo Uogi - Spare drive motor - Main bearing (2x) - Fan housing - Pulley - Gearbox for screen scraper drive Please note: No spare screens are included. However, contact details of the supplier for the screens and screen support edges will be provided. Machine is available immediately.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 11 kW (14.96 HP), A triple pass rotary drum dryer is a type of industrial dryer that is used to reduce or remove moisture from a material. It gets its name from the three rotating drums through which the material passes, each with a different purpose in the drying process. This type of dryer is commonly used in the production of various bulk solids, including minerals, agricultural products, and biomass. Here are the key features and components of a triple pass rotary drum dryer: 1. Triple Pass Design: - The material being dried passes through three rotating drums or cylinders, hence the term "triple pass." Each drum serves a specific purpose in the drying process. 2. Material Flow: - The material enters the dryer and first passes through the innermost drum. After the initial drying phase, it moves to the middle drum and then to the outer drum, undergoing additional drying in each pass. 3. Heat Source: Pgsdpfx Ajq Nfuzjb Uji - Heat is typically provided by a combustion system, such as a burner or furnace, located at one end of the drum dryer. The hot gases generated by the combustion process flow through the rotating drums, transferring heat to the material. 4. Air Flow: - The dryer is designed to optimize air flow through the drums, ensuring efficient drying. In a triple pass design, the material and hot gases move counter-currently through the three drums, enhancing heat transfer and drying efficiency. 5. Lifting Flights or Lifters: - Lifters are internal components inside the drums designed to lift and cascade the material as it rotates. This movement promotes good heat transfer and uniform drying. 6. Retention Time: - The triple pass configuration allows for an extended retention time of the material in the drying system. This longer exposure to heat enhances the drying efficiency, making the triple pass rotary drum dryer suitable for materials with high moisture content. 7. Cooling Section: - After the material completes the three passes and reaches the end of the drum dryer, a cooling section may be included to reduce the temperature of the dried material before it is discharged. 8. Applications: - Triple pass rotary drum dryers are used in various industries, including agriculture (drying crops like grains), minerals (drying ores or concentrates), and biomass (drying wood chips or other organic materials). 9. Efficiency and Energy Consumption: - Triple pass rotary drum dryers are known for their high efficiency due to the extended drying time and effective heat transfer. However, they may have higher energy consumption compared to single or double pass dryers. When selecting a triple pass rotary drum dryer, it's essential to consider factors such as the type of material to be dried, required moisture reduction, and overall processing requirements. Proper design and operation are crucial to achieving optimal drying performance. Technical details We have different options for different requirements, please contact our team for more info.

Condition: new, Year of construction: 2026, power: 11 kW (14.96 HP), Rotary drum dryer for drying various kinds of materials like sand, biomass, sawdust, red mud, bentonite, coal Diameter: 1200mm Length: 10000mm Power: 11-13KW Gradient: 3% Capacity: 1.5-3 t/h Weight: 14Tons Besides this model, we also have the other models of rotary drum dryer 1500x12000mm, 2400x20000mm, and complete drying system for various materials, welcome to contact us for more details Pjdpeq Igyvefx Ab Uogi Our factory can design suitable solution according to your specific requirements. Rotary drum dryers are highly efficient machines used extensively in the processing of wood chips, sawdust, and biomass. They operate by utilizing a rotating drum that heats and dries the materials as they are transported through the cylinder. The design of these dryers allows them to handle a wide range of particle sizes and moisture levels, making them suitable for various types of biomass. They can also tolerate high-temperature exhaust gases, which contributes to their efficiency and versatility in industrial applications. Rotary Drum Dryer for Wood Chip, Sawdust, Biomass 🌳 Introduction to Rotary Drum Dryers In the realm of biomass processing, moisture control is key. Enter the Rotary Drum Dryer, an indispensable machine designed to efficiently reduce the moisture content of wood chips, sawdust, and biomass. This essential tool enhances productivity, improves fuel quality, and is pivotal in biomass energy production. Let’s explore its functionality and benefits! 💡 💼 Key Benefits of Using a Rotary Drum Dryer 1. Energy Efficiency: Designed to optimize energy use, Rotary Drum Dryers consume less power while delivering high drying efficiency. 🌿💡 2. High Capacity: Capable of handling large volumes of biomass, these dryers are perfect for industrial applications where large-scale drying is needed. 🏭 3. Improved Product Quality: By achieving the optimal moisture content, the dryer enhances the quality of biomass for fuel, pellets, and other applications. 🔥 4. Versatility: Suitable for a wide range of materials including wood chips, sawdust, and various types of biomass, making it a versatile tool in any biomass processing plant. 🌳 # Application Fields and Materials of Rotary Drum Dryer II. Application Fields A. Agriculture - Drying of grains, seeds, and forage. - Processing of agricultural by-products like straw and husks. B. Food Industry - Dehydration of food products such as fruits, vegetables, and spices. - Preservation of food quality during drying. C. Chemical Industry - Drying of chemical powders, granules, and crystals. - Application in the production of fertilizers and detergents. D. Mining and Minerals - Drying of ores, coal, and mineral concentrates. - Reduction of moisture content for easier handling and processing. E. Construction Materials - Drying of sand, cement, and other construction aggregates. - Preparation of materials for manufacturing processes. F. Pharmaceuticals - Drying of pharmaceutical powders and active ingredients. III. Materials Processed by Rotary Drum Dryer A. Organic Materials - Biomass, wood chips, sawdust, and animal feed. B. Inorganic Materials - Sand, clay, limestone, and gypsum. C. Waste Products - Sludge from wastewater treatment plants. - Industrial by-products for recycling or reuse.

Condition: new, Year of construction: 2025, turning diameter over cross slide: 250 mm, turning length: 730 mm, turning diameter: 500 mm, spindle speed (max.): 1,800 rpm, CNC lathe machine CK 6150 with flat bed We offer a new CNC lathe machine model CK6150. We use this machine in our production and you can see it in operation before ordering. The CK 6150 lathe has a flat bed and hardening guides, which ensures a long period of operation of the equipment. The machine is equipped with a CNC system, the GSK CNC system is installed as standard. Optionally, the machine can be equipped with a Fanuc or Siemens CNC system. The machine can have a tool holder for 4-6 or 8 tools, depending on the customer's wishes. It is possible to install a hydraulic chuck on the machine, which will greatly simplify the process of installing parts on it and a hydraulic tailstock. The CK 6150 lathe can be equipped with additional supporting frame for more accurate manufacturing of long parts. Podpfxexdmgvs Ab Ujgi Technical specifications: Model CK 6150 x 1000 Maximum workpiece diameter over bed 500 mm Maximum workpiece diameter over support 250 mm Maximum workpiece length 1000 mm Maximum turning length 730 mm Spindle bore diameter 82 mm Spindle speed 150-1800 rpm Engine power 7.5 kW Mechanical chuck (hydraulic optional) Chuck size 250 mm. 4-position tool holder (6 or 8 optional) Maximum tool size for tool holder 25x25 mm Machine weight 2700 kg Machine dimensions 2650×1700×1820 mm We can also supply lathes CK 6140, CK 6150 and CK 6160 with other dimensions of the working part: CK 6140 dimensions of the working part 550/750 mm CK 6150 dimensions of the working part 1000/1500/2000 mm CK 6160 dimensions of the working part 1000/1500/2000 mm CK 6152E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6185E dimensions of the working part 1000/1500/2000/3000/4000 mm CK 61100E dimensions of the working part 1000/1500/2000/3000 mm CK 61125E dimensions of the working part 1000/1500/2000/3000 mm

Condition: excellent (used), Year of construction: 2004, operating hours: 114,000 h, overall weight: 4,400 kg, power: 250 kW (339.91 HP), volume flow: 2.802 m³/h, operating pressure: 10 bar, Regularly serviced, in excellent condition. Atlas Copco ZR250 Screw compressor, 10bar 46m3/min Oil-free, water-cooled. MD600 with adsorption dryer Compressor: Manufacturer: Atlas Copco Type: ZR 250 year of manufacture. 2004 loaded operating hours 114,000 Max. operating pressure: 10bar single-stage drive Cooling water consumption 3.7 liters/s Air delivery: 43.6m3/min Water cooled Oil free Power: 250 kW Mains voltage: 400v 50Hz 445A Last service: September 2023 Adsorption dryer, water-cooled Manufacturer: Atlas Copco Psdjrp D Uxjpfx Ab Uegi Type: MD 600 W Year of construction: 2004 Max. operating pressure: 10.5 bar Empty volume: 350 liters machine dimensions: length: 3000mm width: 1600mm height: 2000mm weight: 4400 kg

Condition: excellent (used), Year of construction: 2022, IES screw compressed air units supply a continuous, reliable flow of compressed air directly to the point of use without requiring a dedicated room. The ECB – SCB range, made according to high quality standards, uses components by leading companies on the market, ensuring reliability and traceability. 7.5 KW 8 Bar Psdpfx Aboxaxr No Ujgi 1000 lts/min Very low running hours - 1351 run hours Complete with three filter set

Condition: like new (used), Chanber size: 280x180x500mm upper 280x130x450mm lower Psdpfsd Sm Disx Ab Uogi Max temperature: 700 C °

Condition: ready for operation (used), Year of construction: 2013, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: DR047-13 / 10015861, Complete resin dryer system for injection moulding production. The system has been used sparingly and is in good condition. The system consists of multiple components that can also be sold separately, as follows: 1 resin dryer Moretto VTH 31 V, SN 1906041 / 2019 2 resin dryers Plastic Systems, SN DR047-13 / 10015861 / 2013, capacity 370 kg each Dwjbk Rkjwx E Nbjm Eceb 23 resin silos with the following capacities: - 54 kg * 4 pcs - 105 kg * 6 pcs - 113 kg * 2 pcs - 75 kg * 2 pcs - 56 kg * 4 pcs - 22 kg * 2 pcs - 140 kg * 1 pc - 210 kg * 1 pc - 420 kg * 1 pc Distribution pipelines. Stainless steel pipes and fittings available. Do not hesitate to contact us for a personalised price quote. Pgedpfjwx E Nbex Ab Uji

Condition: not inspected (used), Year of construction: 1986, functionality: unexamined, travel distance X-axis: 2,000 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 1,000 mm, rotational speed (max.): 1,700 rpm, controller model: Heidenhain TNC 155, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS X-axis travel: 2,000 mm Y-axis travel: 900 mm Z-axis travel: 1,000 mm Pgsdpfx Ajyv Ar Usb Uei Clamping surface: 2,200 x 960 mm Spindle speed range: 20 – 1,700 rpm Tool holder: SK 50 Rapid traverse: 10 m/min Number of milling head positions: 4 MACHINE DETAILS Control model: Heidenhain TNC 155 Dimensions & Weight Space requirement (L x W x H): approx. 7,000 x 4,200 x 2,900 mm Machine weight: approx. 16 t

Condition: ready for operation (used), Year of construction: 2002, operating hours: 22,347 h, functionality: fully functional, machine/vehicle number: 190347, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 1,500 mm, table load: 3,000 kg, controller model: Heidenhain TNC 430 B, TECHNICAL DETAILS Travel X-axis: 3,000 mm Travel Y-axis: 1,600 mm Travel Z-axis: 1,500 mm Table size (2x): 2,000 x 2,000 mm Table load capacity: 3 t Spindle speeds: 60 - 3,000 rpm Spindle taper: ISO 50 MACHINE DETAILS Control: Heidenhain TNC 430 B digital Number of controlled axes: 6 Milling drive: 25 kW Total power requirement: 50 kW Dimensions & Weight Space requirement: approx. 6.5 x 3 x 3 m Machine weight: approx. 26 t Program run time: 22,347 h EQUIPMENT Psdpfxsyu Rr Eo Ab Ujgi Integrated coolant supply (IKZ) 40-position automatic tool changer Chip conveyor High-speed spindle (30,000 rpm) 2 pallets

Condition: ready for operation (used), Year of construction: 2000, operating hours: 25,616 h, functionality: fully functional, machine/vehicle number: 184640, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 1,500 mm, table load: 5,000 kg, controller model: Heidenhain TNC 430 B, TECHNICAL DETAILS Travel X-axis: 3,000 mm Travel Y-axis: 1,400 mm Travel Z-axis: 1,500 mm Table size: 3,000 x 1,400 mm Table load capacity: 5 t Spindle speeds: 60 - 3,000 rpm Spindle taper: ISO 50 MACHINE DETAILS Control: Heidenhain TNC 430 B digital Pgjdpfxsyu Rque Ab Uoi Milling drive power: 22 kW Total power requirement: 50 kW Dimensions & Weight Footprint: approx. 6.5 x 3 x 3 m Machine weight: approx. 22 t Operating Data Program run time: 25,616 h Machine on-time: 53,291 h Control on-time: 55,029 h EQUIPMENT 20-position automatic tool changer Milling head can be automatically swiveled and rotated in 1.5° increments Chip conveyor Adaptable high-speed spindle (30,000 rpm) Mist coolant system

Condition: ready for operation (used), Year of construction: 2005, operating hours: 28,246 h, functionality: fully functional, travel distance X-axis: 3,200 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,600 mm, table load: 20,000 kg, overall weight: 28,000 kg, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS X-axis travel: 3,200 mm Y-axis travel: 2,000 mm Z-axis travel: 1,600 mm B-axis: 360° C-axis: 360° Psdpfx Absyvt Nws Uogi Spindle taper: SK 50 Rotary table (L x W): 2,500 x 2,000 mm Table load capacity: 20,000 kg Tool magazine: 100 pcs. MACHINE DETAILS Dimensions & weight Dimensions (L x W x H): 7,300 x 7,700 x 4,350 mm Machine weight: 28,000 kg Operating hours Operating hours: 75,377 h Spindle hours: 28,246 h EQUIPMENT H- / V- head

Condition: ready for operation (used), Year of construction: 2002, operating hours: 41,859 h, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,500 mm, controller manufacturer: Heidenhain, TECHNICAL DETAILS Travel X-axis: 2,000 mm Travel Y-axis: 1,500 mm Travel Z-axis: 1,500 mm Pgsdsyvt Aqspfx Ab Uoi Number of stations: 90 Head and rotary table: 1,600 x 1,450 mm MACHINE DETAILS Control type: CNC Control: Heidenhain Operating hours Control on-time: 106,253 h Machine on-time: 93,170 h Program runtime: 41,859 h

Condition: used, Year of construction: 2007, turning length 2500 mm control Sinumerik 840 D spindle head A 11 tool numbers 48 swing diameter over bed slide 750 mm swing over bed 780 mm c-axis 0,1-30 1/min diameter of quill 160 mm taper bore MK 5 tool length - max. 500 mm weight of tools max. 15 kg weight of the machine ca. 27 t dimensions of the machine ca. 8,4 x 4,0 x 2,5 m Technical details: Nominal turning length: 2,500 mm Pgedpfx Aewwarusb Uoi Swing diameter over bed slide: 750 mm Swing diameter over bed: 780 mm Working height: 1,300 mm Spindle head to DIN 55026: A 11 Bore through: 123 mm Diameter in front bearing: 200 mm Oriented spindle stop: 0-359 degrees Drive power at 100/60 % duty cycle: 37/45 kW Total speed range: 10-2,500 1/min Number of speed ranges: 2 Speed range I: 10-775 1/min Speed range II: 20-2,500 1/min Max. torque at 60 % duty cycle: 2,500 rpm. Torque at 60 % ED: 2,083 Nm (up to 186 rpm)

Condition: good (used), Year of construction: 2013, control Siemens 840D sl turning length 2000 mm turning speeds max. 3100 1/min Torque 1200 Nm diameter of quill 140 mm quill power 5-30 kN total power requirement 125 kW weight of the machine ca. 20 t The machine can still be inspected under power at the seller's factory. It is in good condition, the precision of the turning operation is very good. Pgodpfx Abov Nw Npo Uei The milling drive is not functional. An offer from Niles for the repair of the milling drive is available on request. Hydraulic steady rest included. Technical details: Turning length 2000 mm Control Siemens 840 D sl Main spindle: Speed max.3800 1/min Main spindle: Torque max. 1200 Nm Pinole diameter 140 mm Center point MK6 Quill force 5 - 30 kN Feed speed Z-axis mm/min Rapid traverse Z-axis 40 m/min Feed rate X-axis - mm/min Rapid traverse X-axis 25 m/min Total power requirement 125 kW Machine weight approx. 20 tons

Condition: used, Used stainless steel Niro spray dryer, Mobile Minor model, size 0.8. The unit measures approximately 800 mm in diameter, 700 mm in height on the right-hand side and 700 mm in depth at the conical base. It is fitted with a top cover that is pneumatically raised and lowered. The unit comprises a top-entry spray nozzle, an atomisation disc, a cyclone, a GEA cartridge filter, an electric heater, a peristaltic pump, a fan, a set of vessel plates, an HMI control panel and a main electrical control panel. Evaporation capacity of approximately 1 to 7 kg/h (depending on the product). Pgjdpfxjyw S Unj Ab Usi

Condition: used, Used Calmic Eurovent 316 stainless steel vacuum shelf dryer. Calmic Eurovent is a leading manufacturer of drying equipment. This unit has an approximately 0.75sqmt drying area. Has (3) 500mm wide x 500mm deep x 160mm high individual drying compartments. Unit includes hot oil recirculation system and (1) Leybold vacuum pump. Unit includes electrical cabinet and separate control cabinet. Main unit is mounted on a mild steel frame. Podpfxoygvnis Ab Uegi

Condition: used, axle configuration: 2 axles, first registration: 03/2019, loading space length: 13,480 mm, loading space width: 2,550 mm, loading space height: 850 mm, total length: 13,680 mm, total width: 2,550 mm, total height: 2,550 mm, suspension: air, tire size: 205/65R17,5, wheelbase: 8,750 mm, color: black, Year of construction: 2019, Equipment: ABS, = Additional Options and Equipment = - EBS = Remarks = Number of axles: 2, Payload: 22,610 kg, Tare weight: 5,390 kg, Gross weight: 28,000 kg, Chassis type: Complete chassis, Kingpin size: 2 inch, Suspension type: Full air suspension, Color: Black, ABS, EBS, Body year: 2019, Loading floor length: 910 cm, Gooseneck length: 438 cm, Axle type: SAF = Further Information = General Information Cab: Day cab Registration number: OV-07-TS Driveline Fuel type: Diesel Transmission Gearbox: Manual transmission Axle configuration Tyre size: 205/65R17.5 Brakes: Drum brakes Suspension: Air suspension Axle 1: Dual tires; Left inner tread: 28 mm; Left outer tread: 27 mm; Right inner tread: 28 mm; Right outer tread: 28 mm Axle 2: Dual tires; Left inner tread: 33 mm; Left outer tread: 29 mm; Right inner tread: 30 mm; Right outer tread: 29 mm Weights Unladen weight: 5,390 kg Payload: 22,610 kg gross combined weight: 28,000 kg Environment Emission class: Euro 0 Condition General condition: average Technical condition: average Podpfx Ajwl Urrob Uogi Visual condition: average Damages: none = Company Information = Kleyn Trucks is one of the world's largest independent dealers of used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our range includes all European brands, model years, and price categories. Why buy from Kleyn Trucks? It's simple! • Large, fast-changing stock • Recognized quality • Competitive prices • Reliable business conduct • We speak many languages • We understand our customers • Assistance with import and transport • (Export) license plates arranged quickly • Expert technical services • The assurance of "recognizable quality" • And more.... Please visit our website for special offers and our complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and send a request via our website. Ask directly about our European warranty package.

Condition: used, Year of construction: 1999, x-travel 3.700 mm y-travel 1.500 mm z-travel 1.000 mm Control Heidenhain table dimensions 4.000 x 1.000 mm table load capacity 10.000 kg spindle tunring speed 3.000 U/min tool taper ISO 50 number of tool places 30 Pos. In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved. Pgsdpsyxr Nnofx Ab Uei